PubMed Health⌕ Search

Biomedical subjects

James R Heath

Publications and source records attributed to James R Heath.

At least 19 recordsLinked to original sources

A distinct effector B cell population drives autoantibody production in SARS-CoV-2 infection.

Autoantibodies (autoAbs) are linked to mortality and Long COVID, yet their cellular origins remain unclear. We analyzed the INCOV cohort and identified 12 age- and sex-matched participants with varying autoAb abundance and integrated single-cell RNA-seq and ATAC-seq data from B cells, plasma proteomics, proteome-wide autoAb profiling, clinical data, and in vitro assays. AutoAb abundance inversely correlated with neutralizing IgG and declined as infection resolved, paralleling the contraction of atypical memory B cells (AtMs). In vitro, AtMs preferentially differentiated into autoAb-producing antibody-secreting cells upon TLR7/8 stimulation. CD11c+ AtMs (double-negative 2, DN2s) in autoAb-high individuals exhibited increased TLR7 signaling, oxidative stress, and isotype switching, regulated by transcription factors T-bet and XBP1. Integrated genetic and genomic analyses showed that DN2s had the strongest enrichment for autoimmune trait heritability and inferred regulatory effects of autoimmune risk variants among B cell subsets. These findings identify DN2s as key precursors of autoAb-producing cells during SARS-CoV-2 infection.

B cell↗

High-affinity CD16A polymorphism associated with reduced risk ofsevere COVID-19.

CD16A is an activating Fc receptor on NK cells that mediates antibody-dependent cellular cytotoxicity (ADCC), a key mechanism in antiviral immunity. However, the role of NK cell-mediated ADCC in SARS-CoV-2 infection remains unclear, particularly whether it limits viral spread and disease severity or contributes to the immunopathogenesis of COVID-19. We hypothesized that the high-affinity CD16AV176 polymorphism influences these outcomes. Using an in vitro reporter system, we demonstrated that CD16AV176 is a more potent and sensitive activator than the common CD16AF176 allele. To assess its clinical relevance, we analyzed 1,027 patients hospitalized with COVID-19 from the Immunophenotyping Assessment in a COVID-19 cohort (IMPACC), a comprehensive longitudinal dataset with extensive transcriptomic, proteomic, and clinical data. The high-affinity CD16AV176 allele was associated with a significantly reduced risk of ICU admission, mechanical ventilation, and severe disease trajectories. Lower anti-SARS-CoV-2 IgG titers were correlated to CD16AV176; however, there was no difference in viral load across CD16A genotypes. Proteomic analysis revealed that participants homozygous for CD16AV176 had lower levels of inflammatory mediators. These findings suggest that CD16AV176 enhances early NK cell-mediated immune responses, limiting severe respiratory complications in COVID-19. This study identifies a protective genetic factor against severe COVID-19, informing future host-directed therapeutic strategies.

Humans↗

Quantitative real-time measurements of DNA hybridization with alkylated nonoxidized silicon nanowires in electrolyte solution.

The quantitative, real-time detection of single-stranded oligonucleotides with silicon nanowires (SiNWs) in physiologically relevant electrolyte solution is demonstrated. Debye screening of the hybridization event is circumvented by utilizing electrostatically adsorbed primary DNA on an amine-terminated NW surface. Two surface functionalization chemistries are compared: an amine-terminated siloxane monolayer on the native SiO2 surface of the SiNW, and an amine-terminated alkyl monolayer grown directly on a hydrogen-terminated SiNW surface. The SiNWs without the native oxide exhibit improved solution-gated field-effect transistor characteristics and a significantly enhanced sensitivity to single-stranded DNA detection, with an accompanying 2 orders of magnitude improvement in the dynamic range of sensing. A model for the detection of analyte by SiNW sensors is developed and utilized to extract DNA-binding kinetic parameters. Those values are directly compared with values obtained by the standard method of surface plasmon resonance (SPR) and demonstrated to be similar. The nanowires, however, are characterized by higher detection sensitivity. The implication is that SiNWs can be utilized to quantitate the solution-phase concentration of biomolecules at low concentrations. This work also demonstrates the importance of surface chemistry for optimizing biomolecular sensing with silicon nanowires.

Alkylation↗

Scanning tunneling microscopy of ethylated Si(111) surfaces prepared by a chlorination/alkylation process.

Scanning tunneling microscopy (STM) and computational modeling have been used to study the structure of ethyl-terminated Si(111) surfaces. The ethyl-terminated surface was prepared by treating the H-terminated Si(111) surface with PCl5 to form a Cl-terminated Si(111) surface with subsequent exposure to C(2)H(5)MgCl in tetrahydrofuran to produce an alkylated Si(111) surface. The STM data at 77 K revealed local, close-packed, and relatively ordered regions with a nearest-neighbor spacing of 0.38 nm as well as disordered regions. The average spot density corresponded to approximately 85% of the density of Si atop sites on an unreconstructed Si(111) surface. Molecular dynamics simulations of a Si(111) surface randomly populated with ethyl groups to a total coverage of approximately 80% confirmed that the ethyl-terminated Si(111) surface, in theory, can assume reasonable packing arrangements to accommodate such a high surface coverage, which could be produced by an exoergic surface functionalization route such as the two-step chlorination/alkylation process. Hence, it is possible to consistently interpret the STM data within a model suggested by recent X-ray photoelectron spectroscopic data and infrared absorption data, which indicate that the two-step halogenation/alkylation method can provide a relatively high coverage of ethyl groups on Si(111) surfaces.

Journal Article↗

Scanning tunneling microscopy and spectroscopy of wet-chemically prepared chlorinated Si111 surfaces.

Chlorine-terminated Si(111) surfaces prepared through the wet-chemical treatment of H-terminated Si(111) surfaces with PCl5 (in chlorobenzene) were investigated using ultrahigh vacuum scanning tunneling microscopy (UHV cryo-STM) and tunneling spectroscopy. STM images, collected at 77 K, revealed an unreconstructed 1 x 1 structure for the chlorination layer, consistent with what has been observed for the gas phase chlorination of H-terminated Si(111). However, the wet-chemical chlorination is shown to generate etch pits in the Si(111) surface, with an increase in etch pit density correlating with increasing PCl5 exposure temperatures. These etch pits were assumed to stabilize the edge structure through the partial removal of the <112> step edges. Tunneling spectroscopy revealed a nonzero density of states at zero bias. This is in contrast to the cases of H-, methyl-, or ethyl-terminated Si(111), in which similar measurements have revealed the presence of a large conductance gap.

Letter↗

Efficient templated synthesis of donor-acceptor rotaxanes using click chemistry.

The mild reaction conditions, remarkable functional group compatibility, and complete regioselectivity of the Cu-catalyzed Huisgen 1,3-dipolar cycloaddition ("click chemistry") between organic azides and terminal alkynes have led to a threading-followed-by-stoppering approach to the synthesis of donor-acceptor rotaxanes incorporating cyclobis(paraquat-p-phenylene) (CBPQT4+) as the pi-accepting ring component. Rotaxane formation is initiated by reacting azide-functionalized pseudorotaxanes containing pi-donating 1,5-dioxynaphthalene (DNP) recognition units with appropriate alkyne-functionalized stoppers. The high yields obtained in this efficient, kinetically controlled post-assembly covalent modification, as well as the excellent convergence of the synthetic protocol, are demonstrated by the preparation of [2]-, [3]-, and [4]rotaxanes containing multiple DNP/CBPQT4+ donor-acceptor recognition motifs.

Journal Article↗

A non-oxidative approach toward chemically and electrochemically functionalizing Si(111).

A general method for the non-oxidative functionalization of single-crystal silicon(111) surfaces is described. The silicon surface is fully acetylenylated using two-step chlorination/alkylation chemistry. A benzoquinone-masked primary amine is attached to this surface via Cu(I)-catalyzed Huisgen 1,3-dipolar cycloaddition ("click" chemistry). The benzoquinone is electrochemically reduced, resulting in quantitative cleavage of the molecule and exposing the amine terminus. Molecules presenting a carboxylic acid have been immobilized to the exposed amine sites. X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), cyclic voltammetry (CV), and contact angle goniometry were utilized to characterize and quantitate each step in the functionalization process. This work represents a strategy for providing a general platform that can incorporate organic and biological molecules on Si(111) with minimal oxidation of the silicon surface.

Crystallization↗

Infrared spectroscopic characterization of [2]rotaxane molecular switch tunnel junction devices.

Langmuir-Blodgett monolayers of a bistable [2]rotaxane were prepared at packing densities of 118, 73, and 54 A(2)/molecule. The monolayers were both characterized via infrared spectroscopy before and after evaporation of a 2 nm film of titanium and incorporated into molecular switch tunnel junction devices. The study suggests that the evaporation process primarily affects portions of the molecule exposed to the metal atom source. Thus, in tightly packed monolayers (73 and 54 A(2)/molecule), only the portions of the [2]rotaxane that are present at the molecule/air interface are clearly affected, leaving key functionality necessary for switching intact. Monolayers transferred at a lower pressure (118 A(2)/molecule) exhibit nonspecific damage and poor switching behavior following Ti deposition. These results indicate that tightly packed monolayers and sacrificial functionality displayed at the molecule/air interface are important design principles for molecular electronic devices.

Journal Article↗

Chlorination-methylation of the hydrogen-terminated silicon(111) surface can induce a stacking fault in the presence of etch pits.

Recently, we reported STM images of the methylated Si(111) surface [prepared through chlorination-alkylation of the Si(111)-H surface] taken at 4.7 K, indicating that the torsion angle of the methyl group with respect to the subsurface silicon layer is phi = 23 +/- 3 degrees . Repulsions between H atoms in adjacent methyl groups are minimized at 30 degrees , while repulsions between H atoms and second layer Si atoms are minimized at 60 degrees . The experimental result of 23 degrees is surprising because it suggests a tendency of the methyl group toward the eclipsed configuration (0 degrees ) rather than staggered (60 degrees ). In contrast, extensive fully periodic quantum mechanical Density Functional Theory studies of this surface give an equilibrium torsion angle of 37.5 degrees , indicating a tendency toward the staggered configuration. This discrepancy can be resolved by showing that the CH3 on the step edges and etch pits interacts repulsively with the CH3 on the surface terraces unless a stacking fault is introduced between the first and second silicon layers of the Si(111)-CH3 surface terraces. We propose that this could occur during the chlorination-alkylation of the Si(111)-H surface. This stacking fault model predicted phi = 22.5 degrees measured with respect to the bulk (corresponding to phi = 37.5 degrees with respect to the second layer Si atoms). This model can be tested by measuring the orientation of the CH3 within the etch pits, which should have phi = 37.5 degrees , or by making a surface without etch pits, which should have phi = 37.5 degrees .

Journal Article↗

Nanotechnologies for biomolecular detection and medical diagnostics.

Nanotechnology-based platforms for the high-throughput, multiplexed detection of proteins and nucleic acids in heretofore unattainable abundance ranges promise to bring substantial advances in molecular medicine. The emerging approaches reviewed in this article, with reference to their diagnostic potential, include nanotextured surfaces for proteomics, a two-particle sandwich assay for the biological amplification of low-concentration biomolecular signals, and silicon-based nanostructures for the transduction of molecular binding into electrical and mechanical signals, respectively.

Biopolymers↗

Circuit fabrication at 17 nm half-pitch by nanoimprint lithography.

High density metal cross bars at 17 nm half-pitch were fabricated by nanoimprint lithography. Utilizing the superlattice nanowire pattern transfer technique, a 300-layer GaAs/AlGaAs superlattice was employed to produce an array of 150 Si nanowires (15 nm wide at 34 nm pitch) as an imprinting mold. A successful reproduction of the Si nanowire pattern was demonstrated. Furthermore, a cross-bar platinum nanowire array with a cell density of approximately 100 Gbit/cm(2) was fabricated by two consecutive imprinting processes.

Journal Article↗

Silicon p-FETs from ultrahigh density nanowire arrays.

Statistical numbers of field-effect transistors (FETs) were fabricated from a circuit of 17-nm-wide, 34-nm-pitch Si nanowires boron doped at a level of 10(18) cm-3. Top-gated 4-microm-wide Si nanowire p-FETs yielded low off-currents (approximately 10(-12) A), high on/off ratios (10(5)-10(6)), good on current values (30 microA/microm), high mobilities (approximately 100 cm2/V-s), and low subthreshold swing values (approximately 80 mV/decade between 10(-12) and 10(-10) A increasing to 200 mV/decade between 10(-10)-10(-8) A).

Electric Impedance↗

Spiers Memorial Lecture. Molecular mechanics and molecular electronics.

We describe our research into building integrated molecular electronics circuitry for a diverse set of functions, and with a focus on the fundamental scientific issues that surround this project. In particular, we discuss experiments aimed at understanding the function of bistable rotaxane molecular electronic switches by correlating the switching kinetics and ground state thermodynamic properties of those switches in various environments, ranging from the solution phase to a Langmuir monolayer of the switching molecules sandwiched between two electrodes. We discuss various devices, low bit-density memory circuits, and ultra-high density memory circuits that utilize the electrochemical switching characteristics of these molecules in conjunction with novel patterning methods. We also discuss interconnect schemes that are capable of bridging the micrometre to submicrometre length scales of conventional patterning approaches to the near-molecular length scales of the ultra-dense memory circuits. Finally, we discuss some of the challenges associated with fabricated ultra-dense molecular electronic integrated circuits.

Computers, Molecular↗

Ground-state equilibrium thermodynamics and switching kinetics of bistable [2]rotaxanes switched in solution, polymer gels, and molecular electronic devices.

We report on the kinetics and ground-state thermodynamics associated with electrochemically driven molecular mechanical switching of three bistable [2]rotaxanes in acetonitrile solution, polymer electrolyte gels, and molecular-switch tunnel junctions (MSTJs). For all rotaxanes a pi-electron-deficient cyclobis(paraquat-p-phenylene) (CBPQT4+) ring component encircles one of two recognition sites within a dumbbell component. Two rotaxanes (RATTF4+ and RTTF4+) contain tetrathiafulvalene (TTF) and 1,5-dioxynaphthalene (DNP) recognition units, but different hydrophilic stoppers. For these rotaxanes, the CBPQT4+ ring encircles predominantly (>90 %) the TTF unit at equilibrium, and this equilibrium is relatively temperature independent. In the third rotaxane (RBPTTF4+), the TTF unit is replaced by a pi-extended analogue (a bispyrrolotetrathiafulvalene (BPTTF) unit), and the CBPQT4+ ring encircles almost equally both recognition sites at equilibrium. This equilibrium exhibits strong temperature dependence. These thermodynamic differences were rationalized by reference to binding constants obtained by isothermal titration calorimetry for the complexation of model guests by the CBPQT4+ host in acetonitrile. For all bistable rotaxanes, oxidation of the TTF (BPTTF) unit is accompanied by movement of the CBPQT4+ ring to the DNP site. Reduction back to TTF0 (BPTTF0) is followed by relaxation to the equilibrium distribution of translational isomers. The relaxation kinetics are strongly environmentally dependent, yet consistent with a single electromechanical-switching mechanism in acetonitrile, polymer electrolyte gels, and MSTJs. The ground-state equilibrium properties of all three bistable [2]rotaxanes were reflective of molecular structure in all environments. These results provide direct evidence for the control by molecular structure of the electronic properties exhibited by the MSTJs.

Journal Article↗

Multistep synthesis of a radiolabeled imaging probe using integrated microfluidics.

Microreactor technology has shown potential for optimizing synthetic efficiency, particularly in preparing sensitive compounds. We achieved the synthesis of an [(18)F]fluoride-radiolabeled molecular imaging probe, 2-deoxy-2-[18F]fluoro-D-glucose ([18F]FDG), in an integrated microfluidic device. Five sequential processes-[18F]fluoride concentration, water evaporation, radiofluorination, solvent exchange, and hydrolytic deprotection-proceeded with high radio-chemical yield and purity and with shorter synthesis time relative to conventional automated synthesis. Multiple doses of [18F]FDG for positron emission tomography imaging studies in mice were prepared. These results, which constitute a proof of principle for automated multistep syntheses at the nanogram to microgram scale, could be generalized to a range of radiolabeled substrates.

Animals↗

Molecular dynamics simulation of amphiphilic bistable [2]rotaxane langmuir monolayers at the air/water interface.

Bistable [2]rotaxanes display controllable switching properties in solution, on surfaces, and in devices. These phenomena are based on the electrochemically and electrically driven mechanical shuttling motion of the ring-shaped component, cyclobis(paraquat-p-phenylene) (CBPQT(4+)), between a monopyrrolotetrathiafulvalene (mpTTF) unit and a 1,5-dioxynaphthalene (DNP) unit located along a dumbbell component. The most stable state of the rotaxane (CBPQT(4+)@mpTTF) is that in which the CBPQT(4+) ring encircles the mpTTF unit, but a second less favored metastable co-conformation with the CBPQT(4+) ring surrounding the DNP (CBPQT(4+)@DNP) can be formed experimentally. For both co-conformations of an amphiphilic bistable [2]rotaxane, we report here the structure and surface pressure-area isotherm of a Langmuir monolayer (LM) on a water subphase as a function of the area per molecule. These results from atomistic molecular dynamics (MD) studies are validated by comparing with experiments based on similar amphiphilic rotaxanes. For both co-conformations, we found that as the area per molecule increases the thickness of the LM decreases while the molecular tilt increases. Both co-conformations led to similar LM thicknesses at the same packing area. From the simulated LM systems, we calculated the electron density profiles of the monolayer as a function of area per molecule, which show good agreement with experimental analyses from synchrotron X-ray reflectivity measurements of related systems. Decomposing the overall electron density profiles into component contributions, we found distinct differences in molecular packing in the film depending upon the co-conformation. Thus we find that the necessity of allowing the tetracationic ring to become solvated by water leads to differences in the structures for the two co-conformations in the LM. At the same packing area, the value of the overall tilt angle does not seem to be sensitive to whether the CBPQT(4+) ring is encircling the mpTTF or the DNP unit. However, the conformation of the dumbbell does depend on the location of the CBPQT(4+) ring, which is reflected in the segmental tilt angles of the mpTTF and DNP units. Using the Kirkwood-Buff formula in conjunction with MD calculations, we find the surface pressure-area isotherms for each co-conformation in which the CBPQT(4+)@mpTTF form has smaller surface tension and therefore larger surface pressure than the CBPQT(4+)@DNP at the same packing area, differences that decreases with increasing area per molecule, which is verified experimentally.

Air↗