Debate: degenerative scoliosis: to operate or not to operate.
Explore the source record for details and available documents.
Age Factors↗
Biomedical subjects
James W Ogilvie
Publications and source records attributed to James W Ogilvie.
Relative versus absolute modulation of growth in the fusionless treatment of experimental scoliosis.
STUDY DESIGN: Absolute and relative growth modulation of apical spinal segments were measured during creation and correction of an experimental scoliosis in a goat model. OBJECTIVE: To differentiate relative and absolute changes in growth on the concavity and convexity of an experimental scoliosis treated with anterior vertebral stapling. SUMMARY OF BACKGROUND DATA: The creation and correction of vertebral wedge deformities have been previously described in a rat tail model using external fixation as well as in a goat model using anterior vertebral body stapling. METHODS: Progressive, structural, scoliotic curves convex to the right in the thoracic spine were created in 14 Spanish Cross-X female goats using a posterior asymmetric tether. After 7-13 weeks, all tethers were removed, and goats were randomized into stapled (n = 8) and untreated (n = 6) groups. Stapled goats underwent anterior vertebral stapling with 4 shape memory alloy staples (Medtronic Sofamor Danek, Memphis, TN) along the convexity of the maximal curvature. All goats were observed for an additional 7-13 weeks. There were 12 additional goats matched for age, sex, and weight used as growth controls throughout the study. Serial radiographs were used to document progression or correction of the maximal scoliotic deformity, and changes in relative and absolute growth at the apical spinal segment T9-10 (2 adjacent vertebrae and the intervening disc). RESULTS: All tethered goats had progressive, structural, scoliotic curves of significant magnitude during the tethering period (average 61.4 degrees, range 49 degrees to 73 degrees) (P = 0.001). There was 1 goat from each group eliminated from the study because its apical spinal segment did not match the T9-10 level used to establish normal growth in controls. During the treatment period, stapled goats had a correction of -6.9 degrees (P = 0.03), whereas untreated goats had little change (-1.4 degrees). Apical spinal segment wedging progressed in all tethered goats, from 11.1 degrees to 22.4 degrees, during the tethering period (P = 0.001). During the treatment period, wedging corrected -2.2 degrees (range 22.5 degrees to 20.3 degrees) in the stapled goats but progressed +3.5 degrees (range 22.3 degrees to 25.8 degrees) in the untreated goats (P < 0.05). Apical spinal segment growth in all tethered goats was decreased on the concavity by 78% and increased on the convexity by 33% when compared to growth controls (P < 0.001). During the treatment period, growth on the concavity of the apical spinal segment of the stapled goats was decreased by 10% but increased in the untreated goats by 37% when compared to growth controls. On the convexity, apical spinal segment growth at T9-10 was decreased in the stapled goats by 18% and increased in the untreated goats by 29% when compared to growth controls (P < 0.04). CONCLUSIONS: Data in this study show the ability to modulate relative and absolute growth, according to the Hueter-Volkmann law, at the apical spinal segment of a progressive experimental scoliosis. However, anterior vertebral stapling, although able to control progressive wedging and scoliosis at the apical spinal segment, was not able to reverse fully the Hueter-Volkmann effect.
Animals↗
Creation of an experimental idiopathic-type scoliosis in an immature goat model using a flexible posterior asymmetric tether.
STUDY DESIGN: Longitudinal follow-up of animals after a surgically initiated scoliosis. OBJECTIVE: To create a progressive, structural, idiopathic-type, lordoscoliotic curve convex to the right in the thoracic spine of the immature goat using a flexible posterior asymmetric tether with minimal disruption of the spinal elements along the curve. SUMMARY OF BACKGROUND DATA: Our previous work created an experimental scoliosis model using a rigid posterior asymmetric tether to study the safety and efficacy of fusionless scoliosis treatments. Posterior asymmetric tethers, whether rigid or flexible, represent the most reliable method of creating an experimental deformity that approximates idiopathic scoliosis. Although our initial rigid model was unique in creating progressive structural scolioses without violation of the essential spinal elements along the curve, there were a number of shortcomings associated with the model. These included substantially stiff curves and unpredictability of curve progression. METHODS: Scoliosis was created in 24 Spanish Cross X female goats (age, 6-8 weeks; weight, 8-12 kg) using a braided synthetic ligament as a left posterior asymmetric tether from T5 to L1. Convex rib resection and concave rib tethering from ribs 8 to 13 were performed without disruption of the spinal elements before tensioning of the posterior tether. All goats were followed over an 8-week period with serial radiographs to document progression of the deformity. At the end of 8 weeks, the 20 goats with progressive curves were randomized into treatment groups for a separate study. However, 6 of these 20 remained untreated in the subsequent study and, therefore, were followed for an additional 12 to 16 weeks. RESULTS: There were two deaths in the early postoperative period due to pulmonary complications. Of the remaining 22 goats, 20 (91%) developed progressive, structural, idiopathic-type, lordoscoliotic curves convex to the right in the thoracic spine. Initial scoliosis after tethering measured 55.4 degrees on average (range, 37 degrees-75 degrees) and progressed to 74.4 degrees on average (range, 42 degrees-93 degrees) over 8 weeks. The average progression of 19.0 degrees (range, 5 degrees-33 degrees) was statistically significant (P < 0.001). The average initial lordosis after tethering measured -18.9 degrees (range, -13 degrees to -27 degrees) and progressed to -40.7 degrees on average (range, -28 degrees to -56 degrees) over 8 weeks. The average progression in lordosis of -21.8 degrees (range, -5 degrees to -43 degrees) was significant (P < 0.001). CONCLUSIONS: This study demonstrated the effectiveness of a flexible posterior asymmetric tether in creating idiopathic-type deformities in a shorter tethering period than previously described. With substantial remaining spinal growth after the 8-week tethering period and preservation of the essential spinal elements in an undisturbed state, this model is suitable for the study of scoliosis progression and various fusionless scoliosis treatment methods.
Animals↗
Mechanical modulation of vertebral growth in the fusionless treatment of progressive scoliosis in an experimental model.
STUDY DESIGN: Wedging of apical spinal segments was measured during creation and correction of an experimental scoliosis in a goat model. OBJECTIVES: To create and correct apical vertebral wedge deformities in a progressive experimental scoliosis model by purely mechanical means. SUMMARY OF BACKGROUND DATA: The creation and correction of vertebral wedge deformities has been previously described in a rat tail model using external fixation. METHODS: Experimental scoliosis was created in 14 goats using a posterior asymmetric tether with convex rib resection and concave rib tethering. After a period of up to 13 weeks, all tethers were removed and goats were randomized into treated (n = 8) and untreated (n = 6) groups. Treated goats underwent anterior thoracic stapling with four shape memory alloy staples along the convexity of the maximal curvature. Goats were followed for an additional 7 to 13 weeks during treatment. Serial radiographs were used to document progression or correction of the maximal scoliotic deformity as well as to measure the wedging of the apical spinal segment (two adjacent vertebrae and the intervening disc). RESULTS: During the tethering period, all goats achieved a progressive, structural, lordoscoliotic curve of significant magnitude (mean: 61 degrees, range: 49 to 73 degrees). Wedging of the apical spinal segment measured 11.1 degrees at the beginning and 22.4 degrees at the end of the tethering period. The increase in apical spinal segment wedging of +11.3 degrees (10.7 degrees vertebral/0.6-degree disc) was significant (P = 0.001). During the treatment period, the scoliosis in the stapled goats measured 56.8 degrees at the beginning and 43.4 degrees at the end for an average correction of -13.4 degrees (range: 0 to-22 degrees) (P = 0.001), whereas the untreated goats measured 67.0 degrees at the beginning and 59.8 degrees at the end for an average correction of -7.2 degrees (range: +7 to -21 degrees) (P = 0.19). Additionally, wedging of the apical spinal segment in the stapled goats measured 22.5 degrees at the beginning and 20.3 degrees at the end for an average correction of -2.2 degrees (-0.6 degrees vertebral/-1.6-degree disc); wedging of the apical vertebral segment in the untreated goats measured 22.3 degrees at the beginning and 25.8 degrees at the end of the treatment period for an average progression of +3.5 degrees (3.5 degrees vertebral/0.0-degree disc). The difference in apical spinal segment correction versus progression in the stapled (-2.2 degrees) versus control (+3.5 degrees) goats was significant (P < 0.05). CONCLUSIONS: This study demonstrates the ability to create wedge deformities at the apex of an experimental scoliosis in a large animal model and to control the progression of these deformities using anterior thoracic staples.
Animals↗
The search for idiopathic scoliosis genes.
STUDY DESIGN: A cohort of 145 patients with adolescent idiopathic scoliosis (AIS) were identified and contacted to determine whether they had a family history of scoliosis. These results were submitted to an internal genealogical database to screen for potential connections to other AIS families. The severity and incidence of AIS in extended family groups were also analyzed. OBJECTIVES: Our objectives were to quantify the genetic effect in AIS, determine the expressivity and penetrance of AIS in large family groupings, and examine larger scoliosis pedigrees for evidence of multiple genes. SUMMARY OF BACKGROUND DATA: Previous reports have suggested an 80% connectedness among scoliosis families, but no clear evidence of multiple genes. It is not known if there are major gene(s). METHODS: A cohort of 145 AIS probands were identified and contacted to ascertain whether they had a family history of AIS. Their medical records and spine radiographs were reviewed to confirm the diagnosis and determine the disease severity. Using an internal genealogical database, the cases were screened for potential connections that would produce larger extended pedigrees. RESULTS: Overall, 131 of the probands were in the database and 127 showed connections to other scoliosis families, a 97% connectedness. These results suggest a major scoliosis gene, as more than 50% of the probands were connected by founders that all resided in England in the mid 1500s. The differences in penetrance (41% vs. 34%) and expressivity (38% vs. 61%) between seemingly unrelated large family groupings might suggest that two different genes are a major influence for AIS in these families. CONCLUSIONS: Nearly all (97%) AIS patients have familial origins. There appears to be at least one major gene, and the differences in penetrance and expressivity in two large unconnected pedigrees might suggest the presence of more than one gene.
Cohort Studies↗
Three-dimensional analysis of 2 fusionless scoliosis treatments: a flexible ligament tether versus a rigid-shape memory alloy staple.
STUDY DESIGN: Experimental scoliosis was created and subsequently corrected in goats. The 3-dimensional (3-D) effects of the treatments were analyzed. OBJECTIVE: To analyze the 3-D effect of 2 different fusionless scoliosis treatment techniques on an experimental idiopathic-type scoliosis using plain radiographs and computerized tomography. SUMMARY OF BACKGROUND DATA: Scoliosis is a complex 3-D spinal deformity with limited treatment options. By preserving growth, motion, and function of the spine, fusionless scoliosis surgery provides theoretical advantages over current forms of treatment. METHODS: Scoliosis was created in 24 Spanish cross-X female goats using a flexible, left posterior asymmetric tether from the T5 to L1 laminae, with convex rib resection and concave rib tethering from T8 to T13. After 8 weeks of posterior tethering, goats were randomized into 3 treatment groups: group 1, no treatment; group 2, anterior-shape memory alloy staple; and group 3, anterior ligament tether with bone anchor. The 6 levels of maximal curvature were instrumented in groups 2 and 3. All goats were observed for an additional 12-16 weeks. Serial radiographs and computerized tomography were used to document progression/correction of coronal, sagittal, and transverse plane deformities throughout the study. RESULTS: There were 20 goats that had progressive, structural, idiopathic-type, lordoscoliotic curves convex to the right in the thoracic spine over the 8-week tethering period. An overall deformity score equaling the sum of the scoliosis, lordosis, and axial rotation measurements was calculated for each goat at 3 times. CONCLUSION: The data in this study show the ability of a ligament tether attached to a bone anchor to correct scoliosis modestly in the coronal plane, but not in the sagittal or transverse plane. In addition, although a significant decrease in the deformity score was shown initially in this group (P < 0.001), the effect was lost over time. The final deformity in the bone anchor/ligament tether group wassignificantly less than either the stapled or untreated groups (P < 0.03). Further study is warranted to provide a better understanding of the 3-D effects of fusionless scoliosis treatments.
Alloys↗
Unsuccessful peripherally inserted central catheter placement.
Explore the source record for details and available documents.
Catheterization, Central Venous↗
The use of animal models in fusionless scoliosis investigations.
STUDY DESIGN: Review article of current knowledge of animal models used in the investigations of fusionless scoliosis surgery. OBJECTIVE: To provide a summary of available data on animal studies in the area of fusionless scoliosis surgery. SUMMARY OF BACKGROUND DATA: Fusionless scoliosis surgery is an emerging treatment for patients with idiopathic scoliosis as it offers theoretical advantages over current forms of treatment. These advantages include correction of spinal deformity while preserving growth, motion, and function of the spine. METHODS: Literature review of animal models used in the investigation of fusionless scoliosis surgery. RESULTS: At present, the theoretical advantages of fusionless scoliosis surgery in the treatment of idiopathic scoliosis are unproven clinically. However, investigations using animal models have demonstrated promise for this new form of treatment. These studies have demonstrated the safety and efficacy of a variety of fusionless scoliosis implants in treating experimental scoliosis and in modulating spinal growth. CONCLUSION: Fusionless scoliosis surgery offers theoretical advantages over brace treatment and surgery. Like bracing, fusionless treatments preserve growth, motion, and function of the spine. Like surgery, these treatments offer substantial correction of deformity. However, minimally invasive fusionless scoliosis surgery is less extensive than fusion surgery and may avoid adjacent segment degeneration and other complications related to fusion. Additional investigations are required to identify optimal implant strategies, to evaluate the effects of these implants of the spine and surrounding structures, and to define the appropriate patient population for these interventions.
Animals↗
Complications in spondylolisthesis surgery.
STUDY DESIGN: Selected references are cited to illustrate the current status of approaches to surgical complications in isthmic spondylolisthesis surgery. OBJECTIVE: To minimize untoward events and outcomes in the surgical treatment of spondylolisthesis, an awareness of complications and pitfalls specific to spondylolisthesis surgery is necessary. SUMMARY OF BACKGROUND DATA: Pseudarthrosis is the most common complication, and factors that contribute are vertebral geometry, bone grafting options and technique, and immobilization with instrumentation constructs or an orthosis. There has been an increase in neurologic deficits associated with spondylolisthesis surgery during the period of 1996 to 2002. Neurologic sequelae can include cauda equina syndrome, root lesions, autonomic dysfunction, and chronic pain. These can result from reduction maneuvers, instrumentation, and after surgery, although neurologic deficit can occur without identifiable causes. Restoring or maintaining the physiologic sagittal contour of the lumbar spine is a necessary component of surgical planning. METHODS: Literature review. RESULTS: Problems and complications associated with the surgical treatment of spondylolisthesis are well documented in the medical literature. CONCLUSIONS: The occurrence of pseudarthrosis, neurologic deficits, and transition syndromes such as spondylolisthesis acquisita, S1-S2 deformity, and adjacent segment syndrome can be minimized with proper planning and attention to surgical technique.
Humans↗
The efficacy and integrity of shape memory alloy staples and bone anchors with ligament tethers in the fusionless treatment of experimental scoliosis.
BACKGROUND: Scoliosis is a complex three-dimensional deformity with limited treatment options. Current treatments present potential problems that may be addressed with use of fusionless techniques for the correction of scoliosis. However, there are few data comparing the efficacy of different fusionless implant strategies in controlling scoliosis or on the integrity of rigid compared with flexible devices in an in vivo setting over time. The objective of this study was to compare the efficacy and integrity of rigid and flexible anterior thoracic tethers used to treat experimental scoliosis. METHODS: Experimental scoliosis was created in twenty-four Spanish Cross-X female goats and was subsequently treated with either anterior shape memory alloy staples or anterior ligament tethers attached to bone anchors. Serial radiographs were analyzed to determine the efficacy of the implants in controlling scoliosis progression as well as the integrity of the implants at study completion. After the goats were killed, the implants were analyzed with use of three quantitative indices of implant integrity and implant pullout testing. RESULTS: Over the treatment period, scoliosis progressed from 77.3 degrees to 94.3 degrees in the goats treated with staples and was corrected from 73.4 degrees to 69.9 degrees in the goats treated with bone anchors, with loosening of eighteen of forty-two staples (two of the eighteen dislodged) and evidence of drift in two of forty-nine anchors. Histologic sections revealed a consistent halo of fibrous tissue around the staple tines but well-fixed bone anchors at all sites. Pullout testing demonstrated that bone anchors had greater strength than staples initially and at the study completion, with an increase in bone anchor fixation over the course of the study. CONCLUSIONS: In this scoliosis model, the flexible ligament tethers attached to bone anchors demonstrated greater efficacy and integrity than the more rigid shape memory alloy staples.
Alloys↗
Fusionless scoliosis correction using a shape memory alloy staple in the anterior thoracic spine of the immature goat.
STUDY DESIGN: Experimental scoliosis was created in goats and then treated using anterior thoracic stapling. OBJECTIVE: To correct, without fusion, a progressive idiopathic-type scoliotic deformity in an immature goat model using a shape memory alloy staple. SUMMARY OF BACKGROUND DATA: Fusionless scoliosis treatment techniques, using minimally invasive approaches to the anterior thoracic spine, provide theoretical advantages over currently available forms of treatment. METHODS: Experimental scoliosis was created in 40 goats using a posterior asymmetric tether with convex rib resection and concave rib tethering for a period of up to 15 weeks. Twenty-seven goats with progressive deformities were used for subsequent study and randomized into 4 treatment groups: group I, anterior thoracic stapling with removal of the posterior tether; group II, removal of the posterior tether only; group III, anterior thoracic stapling with persistent posterior tethering; and group IV, persistent posterior tethering with no treatment. The treatment period lasted an additional 6 to 14 weeks. Staple backout was graded radiographically. After killing the goats, histology and disc biochemistry analyses were conducted. RESULTS: The goats in group I corrected from an initial 57 degrees of curvature to 43 degrees over the duration of the treatment period. Group II goats, which served as a control for group I, corrected from 67 degrees to 60 degrees during the treatment period. Group III goats demonstrated a modest correction from 65 degrees to 63 degrees with the stapling procedure, whereas group IV goats (controls for group III) progressed from 55 degrees to 67 degrees with a persistent posterior tether during the treatment period. The difference between the correction in group III and progression in group IV was statistically significant (P = 0.002). Complications were limited to partial staple backout in 27% of 56 staples. CONCLUSIONS: The results of this study support the efficacy of an anterior thoracic staple in correcting moderately severe scoliosis and halting the progression of more malignant scoliosis without fusion in a goat model.
Alloys↗
Experimental scoliosis in an immature goat model: a method that creates idiopathic-type deformity with minimal violation of the spinal elements along the curve.
STUDY DESIGN: Experimental scoliosis was created in an immature goat model. OBJECTIVES: To create a progressive, structural, idiopathic-type, lordoscoliotic curve convex to the right in the thoracic spine of the immature goat while maintaining the anterior and posterior elements of the spine along the maximal curve in a pristine state. SUMMARY OF BACKGROUND DATA: Progressive scoliotic curves in a small animal model have been created using a posterior asymmetric tether. However, attempts in larger animal models have had less success and typically required violation of the spinal elements. METHODS: Scoliosis was created in 40 Spanish Cross X female goats (age 1-2 months, weight 8-12 kg) using a left posterior asymmetric tether from T5 to L1. Convex rib resection and concave rib tethering from T8 to T13 were performed before compression across the rigid construct. Goats were followed over a 6- to 15-week period with serial radiographs to document progression of the deformity. RESULTS: Of the 40 goats that underwent posterior assymetric tethering with rib procedures, 7 (18%) encountered substantial complications (five deaths and two neurologic injuries). Of the 33 available for analysis, 27 goats (82%) developed progressive, structural, idiopathic-type, lordoscoliotic curves in convex to the right in the thoracic spine. All curves demonstrated characteristic radiographic features of idiopathic scoliosis including significant displacement of the apical vertebra from the midline, wedging of both the vertebral bodies and discs, rotation, and decreased flexibility. Initial scoliosis after posterior asymmetric tethering measured 42 degrees on average (range 33-50 degrees ) and progressed to 60 degrees on average (range 44-73 degrees ) over 6 to 15 weeks. The average progression of +18 degrees (range 6-37 degrees ) was statistically significant (P < 0.001). CONCLUSIONS: This study establishes an experimental model for scoliosis that creates progressive, structural, idiopathic-type, lordoscoliotic curves convex to the right in the thoracic spine of the immature goat with high statistical significance (P < 0.001). In addition, this method of experimental scoliosis creation avoids violation of the spinal elements throughout the maximal portion of the curve providing an ideal opportunity subsequent study of the deformity.
Animals↗
A cost analysis of bone morphogenetic protein versus autogenous iliac crest bone graft in single-level anterior lumbar fusion.
An economic model was developed to compare costs of stand-alone anterior lumbar interbody fusion with recombinant human bone morphogenetic protein 2 on an absorbable collagen sponge versus autogenous iliac crest bone graft in a tapered cylindrical cage or a threaded cortical bone dowel. The economic model was developed from clinical trial data, peer-reviewed literature, and clinical expert opinion. The upfront price of bone morphogenetic protein (3380 dollars) is likely to be offset to a significant extent by reductions in the use of other medical resources, particularly if costs incurred during the 2 year period following the index hospitalization are taken into account.
Bone Morphogenetic Protein 2↗