Biomedical subjects

Jan P Stegemann

Publications and source records attributed to Jan P Stegemann.

9 recordsLinked to original sources

PubMed2006

Influence of thrombin concentration on the mechanical and morphological properties of cell-seeded fibrin hydrogels.

Fibrin is a biopolymer that has been used in a variety of biomaterial, cell delivery and tissue engineering applications. The enzyme thrombin catalyzes the formation of fibrin microfibrils, which form a three-dimensional mesh in which cells can be directly embedded at the time of gel formation. In this study, fibrin hydrogels containing vascular smooth muscle cells were created using varying concentrations of thrombin. Over 7 days in culture, all gels decreased in volume as the fibrin matrix compacted, and the degree of gel compaction increased as thrombin concentration decreased. The material modulus and ultimate tensile stress of the gels also increased with decreasing thrombin concentration. Addition of thrombin to similar constructs made using collagen Type I did not show an effect on gel compaction or mechanical properties, suggesting that these effects were a result of thrombin's action on fibrin polymerization, and not cellular functions. Cell proliferation in fibrin hydrogels was not significantly affected by thrombin addition. Matrix examination using scanning electron microscopy showed increasing fibrin fiber diameters as thrombin concentration decreased. Confocal microscopic imaging of the actin cytoskeleton showed that cell morphology on two-dimensional substrates of fibrin showed marked changes, with higher thrombin concentrations producing cells with longer cellular projections. However, these morphological changes were not as apparent in cells embedded in three-dimensional (3-D) matrices, in which cells exhibited a similar morphology independent of thrombin concentration. These results relate features of the matrix and cellular components of 3-D fibrin constructs to mechanical properties, and contribute to the understanding of structure-function relationships in cell-seeded, 3-D protein hydrogels.

Animals↗

PubMed2006

Interpenetrating collagen-fibrin composite matrices with varying protein contents and ratios.

Pure and composite hydrogel matrices of collagen type I and fibrin were produced by simultaneous polymerization of each biopolymer in the presence of vascular smooth muscle cells. The ratio of collagen to fibrin in composite matrices was varied from 1:1 to 1:4, with corresponding absolute protein concentrations of 1.0-5.0 mg/mL. Constructs cultured for 7 days were subjected to uniaxial tensile testing, analysis of cell content, as well as scanning electron and confocal microscopic imaging. Gel compaction over time in culture decreased with increasing protein content but was augmented by the presence of fibrin. Material properties (modulus, ultimate tensile stress, and toughness) were highly correlated with gel compaction, protein density, and cell concentration. Maximum force at failure was dependent on absolute protein concentration. This study examined the interrelationships between protein type, ratio, and density in composite biopolymer matrices and contributes to the understanding of structure-function relationships in such materials.

Animals↗

PubMed2005

Encapsulation of adult human mesenchymal stem cells within collagen-agarose microenvironments.

Reliable control over the process of cell differentiation is a major challenge in moving stem cell-based therapies forward. The composition of the extracellular matrix (ECM) is known to play an important role in modulating differentiation. We have developed a system to encapsulate adult human mesenchymal stem cells (hMSC) within spherical three-dimensional (3D) microenvironments consisting of a defined mixture of collagen Type I and agarose polymers. These protein-based beads were produced by emulsification of liquid hMSC-matrix suspensions in a silicone fluid phase and subsequent gelation to form hydrogel beads, which were collected by centrifugation and placed in culture. Bead size and size distribution could be varied by changing the encapsulation parameters (impeller speed and blade separation), and beads in the range of 30-150 microns in diameter were reliably produced. Collagen concentrations up to 40% (wt/wt) could be incorporated into the bead matrix. Visible light and fluorescence microscopy confirmed that the collagen matrix was uniformly distributed throughout the beads. Cell viability post-encapsulation was in the range of 75-90% for all bead formulations (similar to control slab gels) and remained at this level for 8 days in culture. Fluorescent staining of the actin cytoskeleton revealed that hMSC spreading increased with increasing collagen concentration. This system of producing 3D microenvironments of defined matrix composition therefore offers a way to control cell-matrix interactions and thereby guide hMSC differentiation. The bead format allows the use of small amounts of matrix proteins, and such beads can potentially be used as a cell delivery vehicle in tissue repair applications.

Cell Differentiation↗

PubMed2005

Collagen-carbon nanotube composite materials as scaffolds in tissue engineering.

Carbon nanotubes (CNT) are attractive for use in fiber-reinforced composite materials due to their very high aspect ratio, combined with outstanding mechanical and electrical properties. Composite materials comprising a collagen matrix with embedded CNT were prepared by mixing solubilized Type I collagen with solutions of carboxylated single-walled carbon nanotubes (SWNT) at concentrations of 0, 0.2, 0.4, 0.8, and 2.0 weight percent. Living smooth muscle cells were incorporated at the time of collagen gelation to produce cell-seeded collagen-CNT composite matrices. Constructs containing 2.0 wt % CNT exhibited delayed gel compaction, relative to lower concentrations that compacted at the same rate as pure collagen controls. Cell viability in all constructs was consistently above 85% at both Day 3 and Day 7, whereas cell number in CNT-containing constructs was lower than in control constructs at Day 3, though statistically unchanged by Day 7. Scanning electron microscopy showed physical interactions between CNT and collagen matrix. Raman spectroscopy confirmed the presence of CNT at the expected diameter (0.85-1.30 nm), but did not indicate strong molecular interactions between the collagen and CNT components. Such collagen-CNT composite matrices may have utility as scaffolds in tissue engineering, or as components of biosensors or other medical devices.

Animals↗

PubMed2005

Mechanical, biochemical, and extracellular matrix effects on vascular smooth muscle cell phenotype.

The vascular smooth muscle cell (VSMC) is surrounded by a complex extracellular matrix that provides and modulates a variety of biochemical and mechanical cues that guide cell function. Conventional two-dimensional monolayer culture systems recreate only a portion of the cellular environment, and therefore there is increasing interest in developing more physiologically relevant three-dimensional culture systems. This review brings together recent studies on how mechanical, biochemical, and extracellular matrix stimulation can be applied to study VSMC function and how the combination of these factors leads to changes in phenotype. Particular emphasis is placed on in vitro experimental studies in which multiple stimuli are combined, especially in three-dimensional culture systems and in vascular tissue engineering applications. These studies have provided new insight into how VSMC phenotype is controlled, and they have underscored the interdependence of biochemical and mechanical signaling. Future improvements in creating more complex in vitro culture environments will lead to a better understanding of VSMC biology, new treatments for vascular disease, as well as improved blood vessel substitutes.

Adaptation, Physiological↗

PubMed2004

Properties of engineered vascular constructs made from collagen, fibrin, and collagen-fibrin mixtures.

Vascular constructs were formed by embedding rat aortic smooth muscle cells in three-dimensional matrices of Type I collagen, fibrin, or a mixture of collagen and fibrin in a 1:1 ratio, at total matrix protein concentrations of 2 and 4 mg/ml. Morphological and mechanical properties were evaluated after 6 days in culture, and the effect of cyclic mechanical strain on collagen-fibrin mixture constructs was also studied. Constructs made with the lower protein concentration compacted to the greatest degree, and fibrin was found to enhance gel compaction. Each matrix type exhibited a characteristic stress-strain profile. Pure collagen had the highest linear modulus and pure fibrin had the lowest. The ultimate tensile stress was strongly dependent on the degree of gel compaction, and collagen-fibrin mixtures at 2mg/ml total protein content exhibited the highest values. Application of cyclic mechanical strain to collagen-fibrin mixture constructs caused a significant increase in gel compaction and a decrease in cell proliferation. The linear modulus, ultimate tensile stress and toughness of the constructs were all augmented by mechanical strain. These results demonstrate that the properties of engineered vascular tissues can be modulated by the combination of selected extracellular matrix components, and the application of mechanical stimulation.

Animals↗

PubMed2003

Altered response of vascular smooth muscle cells to exogenous biochemical stimulation in two- and three-dimensional culture.

Removal of vascular smooth muscle cells (SMC) from their native environment alters the biochemical and mechanical signals responsible for maintaining normal cell function, causing a shift from a quiescent, contractile phenotype to a more proliferative, synthetic state. We examined the effect on SMC function of culture on two-dimensional (2D) substrates and in three-dimensional (3D) collagen Type I gels, including the effect of exogenous biochemical stimulation on gel compaction, cell proliferation, and expression of the contractile protein smooth muscle alpha-actin (SMA) in these systems. Embedding of SMC in 3D collagen matrices caused a marked decrease in both cell proliferation and expression of SMA. The presence of the extracellular matrix modulated cellular responses to platelet-derived growth factor BB, heparin, transforming growth factor-beta1, and endothelial cell-conditioned medium. Cell proliferation and SMA expression were shown to be inversely related, while gel compaction and SMA expression were not correlated. Taken together, these results show that SMC phenotype and function can be modulated using biochemical stimulation in vitro, but that the effects produced are dependent on the nature of the extracellular matrix. These findings have implications for the study of vascular biology in vitro, as well as for the development of engineered vascular tissues.

Actins↗

PubMed2003

Phenotype modulation in vascular tissue engineering using biochemical and mechanical stimulation.

Biochemical stimulation was applied in combination with cyclic mechanical strain to engineered vascular constructs made of isolated smooth muscle cells in a three-dimensional (3D) collagen type 1 matrix. Platelet-derived growth factor (PDGF) and transforming growth factor beta (TGF-beta) were added exogenously to the medium used to culture the constructs. Mechanical stimulation was applied using a bioreactor system that imparted a 10% circumferential strain at a frequency of 1 Hz. The parameters studied were gel compaction, cell proliferation, and expression of the contractile protein smooth muscle alpha-actin (SMA). Mechanical stimulation caused a characteristic increase in gel compaction and cell proliferation, relative to statically cultured controls. Stimulation with PDGF increased cell proliferation and decreased SMA expression in 3D gels, but inhibited the effects of mechanical stimulation and produced a more open matrix structure. TGF-beta strongly inhibited cell proliferation and increased SMA expression, especially in the presence of mechanical strain, and resulted in a dense matrix. These results show that cell phenotype can be modulated in engineered blood vessels by applying selected combinations of biochemical and mechanical stimuli, and suggest that such control over cell function can be used to tailor the properties of engineered tissues.

Actins↗

PubMedDate not supplied

Genetic modification of smooth muscle cells to control phenotype and function in vascular tissue engineering.

Rat smooth muscle cells (SMCs) stably transfected with the gene for the phenotype regulating protein cyclic guanosine monophosphate-dependent protein kinase (PKG) were used as a cell source in the preparation of three-dimensional (3D) collagen type I vascular constructs. PKG-transfected cells expressed severalfold higher levels of the contractile protein smooth muscle alpha-actin (SMA), relative to untransfected SMCs, both in monolayer culture and in 3D gels. The proliferation rate of PKG-transfected cells was lower than that of untransfected cells in both culture geometries. Three-dimensional collagen constructs made with PKG-transfected cells compacted to a similar degree as those made with untransfected cells, and this compaction could be augmented by biochemical stimulation with platelet-derived growth factor BB (PDGF) or transforming growth factor beta(1) (TGF). Application of cyclic mechanical strain to tubular collagen gels seeded with PKG-transfected cells resulted in a higher degree of gel compaction and circumferential matrix alignment, relative to statically grown controls, but cell proliferation and SMA expression were not affected. These results show that genetic modification of SMCs can be used as a tool to control cell function in vascular tissue engineering, and that the function of such cells can be further modulated by application of biochemical and mechanical stimulation.

Animals↗