PubMed Health⌕ Search

Biomedical subjects

Jane Clarke

Publications and source records attributed to Jane Clarke.

At least 37 records · Page 2Linked to original sources
PubMed2004

Biophysical investigations of engineered polyproteins: implications for force data.

Dynamic force spectroscopy is rapidly becoming a standard biophysical technique. Significant advances in the methods of analysis of force data have resulted in ever more complex systems being studied. The use of cloning systems to produce homologous tandem repeats rather than the use of endogenous multidomain proteins has facilitated these developments. What is poorly addressed are the physical properties of these constructed polyproteins. Are the properties of the individual domains in the construct independent of one another or attenuated by adjacent domains? We present data for a construct of eight fibronectin type III domains from the human form of tenascin that exhibits approximately 1 kcal mol(-1) increase in stability compared to the monomer. This effect is salt and pH dependent, suggesting that the stabilization results from electrostatic interactions, possibly involving charged residues at the interfaces of the domains. Kinetic analysis shows that this stabilization reflects a slower unfolding rate. Clearly, if domain-domain interactions affect the unfolding force, this will have implications for the comparison of absolute forces between types of domains. Mutants of the tenascin 8-mer construct exhibit the same change in stability as that observed for the corresponding mutation in the monomer. And when Phi-values are calculated for the 8-mer construct, the pattern is similar to that observed for the monomer. Therefore, mutational analyses to resolve mechanical unfolding pathways appear valid. Importantly, we show that interactions between the domains may be masked by changes in experimental conditions.

Biophysics↗
PubMed2004

The folding of spectrin domains II: phi-value analysis of R16.

Studies on the folding of helical proteins have shown a wide range of different mechanisms and highlighted the importance of helical propensity as a factor in determining folding mechanism. Here, we contribute to this interesting field with the protein engineering phi-value analysis of the 16th domain of chicken brain alpha-spectrin, R16. The fortuitous curvature seen in the unfolding arm of the chevron plot allows us to investigate both early and late events in folding. R16 is the first two-state helical protein for which this has been possible.

Animals↗
PubMed2004

The folding of spectrin domains I: wild-type domains have the same stability but very different kinetic properties.

The study of proteins with the same architecture, but different sequence has proven to be a valuable tool in the protein folding field. As a prelude to studies on the folding mechanism of spectrin domains we present the kinetic characterisation of the wild-type forms of the 15th, 16th, and 17th domains of chicken brain alpha-spectrin (referred to as R15, R16 and R17, respectively). We show that the proteins all behave in a two-state manner, with different kinetic properties. The folding rate varies remarkably between different members, with a 5000-fold variation in folding rate and 3000-fold variation in unfolding rate seen for proteins differing only 1 kcal mol(-1) in stability. We show clear evidence for significant complexity in the energy landscape of R16, which shows a change in amplitude outside the stopped-flow timescale and curvature in the unfolding arm of the chevron plot. The accompanying paper describes the characterisation of the folding pathway of this domain.

Animals↗
PubMed2004

Comparison of the transition states for folding of two Ig-like proteins from different superfamilies.

In the "fold approach" proteins with a similar fold but different sequences are compared in order to investigate the relationship between native state structure and folding behaviour. Here we compare the properties of the transition states for folding of TI I27, the 27th immunoglobulin domain from human cardiac titin, and that of TNfn3, the third fibronectin type III domain from human tenascin. Experimental phi-values were used as restraints in molecular dynamics simulations to determine the structures that make up the transition state ensembles (TSEs) for folding of the two proteins. The restrained simulations that we present allow a detailed structural comparison of the two TSEs to be made. Further calculations show explicitly that for both proteins the formation of the interactions involving the residues in the folding nucleus is sufficient for the establishment of the topology of the Ig-like fold. We found that, although the folding nuclei of the two proteins are similar, the packing of the folding nucleus of TI I27 is much tighter than that of TNfn3, reflecting the higher experimental phi-values and beta(T) (Tanford Beta) of TI I27. These results suggest that the folding nucleus can be significantly deformed to accommodate extensive sequence variation while conserving the same folding mechanism.

Amino Acid Sequence↗
PubMed2004

The origin of protein sidechain order parameter distributions.

Previous work by Wand et al. (Nature 2001, 411, 501-504) showed that the NMR order parameters characterizing the amplitude of motion of protein side chains seemed to form a multimodal distribution. At the time, no detailed explanation of this at the molecular level was offered, yet three "classes" of motion were inferred. We have analyzed a larger published data set and found that, although the distribution is multimodal, the evidence for three classes is weak. More significantly, we have been able to provide a simple physical explanation for the distributions based on the results of molecular dynamics simulations. This result will aid in the interpretation of data from NMR dynamics experiments.

Amino Acids↗
PubMed2004

The importance of loop length in the folding of an immunoglobulin domain.

Immunoglobulin (Ig)-like proteins have been shown to fold following formation of a nucleus comprising interactions between residues that are distant in the primary sequence. What role do the loops connecting these nucleus residues play? Here, the importance of loops connecting beta-strands in different sheets of the Ig fold is investigated, by insertion of five glycine residues into the B-C loop of an Ig domain from human titin, TI I27. The folding pathway of this elongated 'pseudo wild-type' TI I27 is probed using protein engineering and Phi-value analysis. The Phi-values calculated for mutants within the pseudo wild-type protein indicate that the folding nucleus in wild-type TI I27 is conserved, supporting the hypothesis that the inter-sheet loop is not critical to the formation of a long-range folding nucleus.

Amino Acid Sequence↗
PubMed2004

Thermodynamic characterisation of two transition states along parallel protein folding pathways.

Recent work has shown that a beta-sandwich domain from the human muscle protein titin (TI I27) unfolds via more than one pathway, providing experimental evidence for a long-standing theoretical prediction in protein folding. Here we present a thermodynamic analysis of two transition states along different folding pathways for this protein. The unusual upwards curvature previously observed in the denaturant-dependent unfolding kinetics is increased at both high and low temperatures, indicating that the high denaturant pathway is becoming more accessible. The transition states in each pathway are structurally distinct and have very different heat capacities. Interestingly the nucleation-condensation pathway is dominant at all physiologically relevant temperatures, supporting the suggestion that pathways with diffuse rather than localised transition states have been selected for by evolution to prevent misfolding.

Protein Folding↗
PubMed2004

Hydrophobic core fluidity of homologous protein domains: relation of side-chain dynamics to core composition and packing.

The side-chain dynamics of methyl groups in two structurally related proteins from the fibronectin type III (fnIII) superfamily, the third fnIII domain from human tenascin (TNfn3) and the tenth fnIII domain from human fibronectin (FNfn10), have been studied by NMR spectroscopy. Side-chain order parameters reveal that the hydrophobic cores of the two proteins have substantially different mobilities. The core of TNfn3 is very dynamic, with exceptionally low order parameters for the most deeply buried residues, while that of FNfn10 is more like those of other proteins which have been studied with this technique, having a relatively rigid core with uniformly distributed dynamics. The unusually dynamic core of TNfn3 appears to be related to its amino acid composition, which makes it more fluid-like. A further explanation for the mobility of the TNfn3 core may be found in the negative correlation between the order parameter and excess packing volume, which shows that the core of TNfn3 is less densely packed and consequently has lower methyl order parameters for its buried residues. Rotameric transitions, presumably facilitated by the lower packing density, appear to make an important contribution to lowering the order parameters, and have been probed by measuring three-bond scalar couplings. Overall, although backbone dynamics is generally similar for proteins with the same topology on a fast time scale (picoseconds to nanoseconds), this study shows that a single fold can accommodate a wide variation in the dynamic properties of its core.

Amino Acid Sequence↗
PubMed2004

Atomic force microscopy: mechanical unfolding of proteins.

Mechanical unfolding of proteins using atomic force microscopy is becoming a routine biophysical technique. Mechanistic investigations in this rapidly evolving field are beginning to resolve the factors that contribute to the behaviour of biological macromolecules under force. Here we describe the force-mode apparatus, the experimental set-up, tractable systems of study, and the analysis of the resultant force data. Finally we summarise some of the recent achievements and limitations of this technique.

Cloning, Molecular↗
PubMed2003

Mechanical unfolding of a titin Ig domain: structure of transition state revealed by combining atomic force microscopy, protein engineering and molecular dynamics simulations.

Titin I27 shows a high resistance to unfolding when subject to external force. To investigate the molecular basis of this mechanical stability, protein engineering Phi-value analysis has been combined with atomic force microscopy to investigate the structure of the barrier to forced unfolding. The results indicate that the transition state for forced unfolding is significantly structured, since highly destabilising mutations in the core do not affect the force required to unfold the protein. As has been shown before, mechanical strength lies in the region of the A' and G-strands but, contrary to previous suggestions, the results indicate clearly that side-chain interactions play a significant role in maintaining mechanical stability. Since Phi-values calculated from molecular dynamics simulations are the same as those determined experimentally, we can, with confidence, use the molecular dynamics simulations to analyse the structure of the transition state in detail, and are able to show loss of interactions between the A' and G-strands with associated A-B and E-F loops in the transition state. The key event is not a simple case of loss of hydrogen bonding interactions between the A' and G-strands alone. Comparison with Phi-values from traditional folding studies shows differences between the force and "no-force" transition states but, nevertheless, the region important for kinetic stability is the same in both cases. This explains the correspondence between hierarchy of kinetic stability (measured in stopped-flow denaturant studies) and mechanical strength in these titin domains.

Computer Simulation↗
PubMed2003

Hidden complexity in the mechanical properties of titin.

Individual molecules of the giant protein titin span the A-bands and I-bands that make up striated muscle. The I-band region of titin is responsible for passive elasticity in such muscle, and contains tandem arrays of immunoglobulin domains. One such domain (I27) has been investigated extensively, using dynamic force spectroscopy and simulation. However, the relevance of these studies to the behaviour of the protein under physiological conditions was not established. Force studies reveal a lengthening of I27 without complete unfolding, forming a stable intermediate that has been suggested to be an important component of titin elasticity. To develop a more complete picture of the forced unfolding pathway, we use mutant titins--certain mutations allow the role of the partly unfolded intermediate to be investigated in more depth. Here we show that, under physiological forces, the partly unfolded intermediate does not contribute to mechanical strength. We also propose a unified forced unfolding model of all I27 analogues studied, and conclude that I27 can withstand higher forces in muscle than was predicted previously.

Biomechanical Phenomena↗
PubMed2003

Self-consistent determination of the transition state for protein folding: application to a fibronectin type III domain.

We present a general approach in which theory and experiments are combined in an iterative manner to provide a detailed description of the transition state ensemble (TSE) for folding. The method is illustrated by applying it to TNfn3, a fibronectin type III domain protein. In the first iteration, a coarse-grained determination of the TSE is carried out by using a limited set of experimental phi values as constraints in a molecular dynamics sampling simulation. The resulting model of the TSE is used to determine the additional residues whose phi value measurement would provide the most information for refining the TSE. Successive iterations with an increasing number of phi value measurements are carried out until no further changes in the properties of the TSE are detected or there are no additional residues whose phi values can be measured. In the study of TNfn3 three iterations were necessary to achieve self-consistency. A retrospective application of the method can be used to determine the accuracy of the TSE results and to find "key residues" for folding, i.e., those that are most important for the formation of the TSE. The approach reported here is an efficient method for finding the structures that make up the TSEs for protein folding. Its use will improve future efforts for their experimental determination and refinement.

Fibronectins↗
PubMed2003

Fusion of contrast-enhanced breast MR and mammographic imaging data.

Increasing use is being made of Gd-DTPA contrast-enhanced magnetic resonance imaging for breast cancer assessment since it provides 3D functional information via pharmacokinetic interaction between contrast agent and tumour vascularity, and because it is applicable to women of all ages as well as patients with post-operative scarring. Contrast-enhanced MRI (CE-MRI) is complementary to conventional X-ray mammography, since it is a relatively low-resolution functional counterpart of a comparatively high-resolution 2D structural representation. However, despite the additional information provided by MRI, mammography is still an extremely important diagnostic imaging modality, particularly for several common conditions such as ductal carcinoma in situ (DCIS) where it has been shown that there is a strong correlation between microcalcification clusters and malignancy. Pathological indicators such as calcifications and fine spiculations are not visible in CE-MRI and therefore there is clinical and diagnostic value in fusing the high-resolution structural information available from mammography with the functional data acquired from MRI imaging. This paper presents a novel data fusion technique whereby medial-lateral oblique (MLO) and cranial-caudal (CC) mammograms (2D data) are registered to 3D contrast-enhanced MRI volumes. We utilise a combination of pharmacokinetic modelling, projection geometry, wavelet-based landmark detection and thin-plate spline non-rigid 'warping' to transform the coordinates of regions of interest (ROIs) from the 2D mammograms to the spatial reference frame of the contrast-enhanced MRI volume. Of key importance is the use of a flexible wavelet-based feature extraction technique that enables feature correspondences to be robustly determined between the very different image characteristics of X-ray mammography and MRI. An evaluation of the fusion framework is demonstrated with a series of clinical cases and a total of 14 patient examples.

Adult↗
PubMed2003

Parallel protein-unfolding pathways revealed and mapped.

Theoretical studies of protein folding suggest that multiple folding pathways should exist, but there is little experimental evidence to support this. Here we demonstrate changes in the flux between different transition states on parallel folding pathways, resulting in unprecedented upward curvature in the denaturant-dependent unfolding kinetics of a beta-sandwich protein. As denaturant concentration increases, the highly compact transition state of one pathway becomes destabilized and the dominant flux of protein molecules shifts toward another pathway with a less structured transition state. Furthermore, point mutations alter the relative accessibility of the pathways, allowing the structure of two transition states on separate, direct folding pathways to be mapped by systematic Phi-value analysis. It has been suggested that pathways with diffuse rather than localized transition states are evolutionarily selected to prevent misfolding, and indeed we find that the transition state favored at high concentrations of denaturant is more polarized than the physiologically relevant one.

Connectin↗
PubMed2002

Mechanical unfolding of a titin Ig domain: structure of unfolding intermediate revealed by combining AFM, molecular dynamics simulations, NMR and protein engineering.

The mechanical unfolding of an immunoglobulin domain from the human muscle protein titin (TI I27) has been shown to proceed via a metastable intermediate in which the A-strand is detached. The structure and properties of this intermediate are characterised in this study. A conservative destabilising mutation in the A-strand has no effect on the unfolding force, nor the dependence of the unfolding force on the pulling speed, indicating that the unfolding forces measured in an AFM experiment are those required for the unfolding of the intermediate and not the native state. A mutant of TI I27 with the A-strand deleted (TI I27-A) is studied by NMR and standard biophysical techniques, combined with protein engineering. Molecular dynamics simulations show TI I27-A to be a good model for the intermediate. It has a structure very similar to the native state, and is surprisingly stable. Comparison with a Phi-value analysis of the unfolding pathway clearly shows that the protein unfolds by a different pathway under an applied force than on addition of denaturant.

Computer Simulation↗
PubMed2002

A simple method for probing the mechanical unfolding pathway of proteins in detail.

Atomic force microscopy is an exciting new single-molecule technique to add to the toolbox of protein (un)folding methods. However, detailed analysis of the unfolding of proteins on application of force has, to date, relied on protein molecular dynamics simulations or a qualitative interpretation of mutant data. Here we describe how protein engineering Phi value analysis can be adapted to characterize the transition states for mechanical unfolding of proteins. Single-molecule studies also have an advantage over bulk experiments, in that partial Phi values arising from partial structure in the transition state can be clearly distinguished from those averaged over alternate pathways. We show that unfolding rate constants derived in the standard way by using Monte Carlo simulations are not reliable because of the errors involved. However, it is possible to circumvent these problems, providing the unfolding mechanism is not changed by mutation, either by a modification of the Monte Carlo procedure or by comparing mutant and wild-type data directly. The applicability of the method is tested on simulated data sets and experimental data for mutants of titin I27.

Animals↗
PubMed2002

Sequence conservation in Ig-like domains: the role of highly conserved proline residues in the fibronectin type III superfamily.

The role of conserved proline residues in fibronectin type III (fnIII) domains is investigated. Surprisingly, none of the standard set of explanations for residue conservation applies. The proline residues are not apparently conserved for function, or stability, or to nucleate folding, or to promote stabilising interactions across domain boundaries. However, when the most highly conserved proline residues are mutated to alanine there is an increase in the rate of aggregation of a fnIII double-module construct. The results suggest that proline residues may be conserved at domain-domain boundaries in fnIII domains to prevent aggregation in multi-modular proteins.

Amino Acid Motifs↗