Biomedical subjects

Janos Vörös

Publications and source records attributed to Janos Vörös.

13 recordsLinked to original sources

PubMed2006

Use of PLL-g-PEG in micro-fluidic devices for localizing selective and specific protein binding.

By utilizing flow-controlled PLL-g-PEG and PLL-g-PEGbiotin modification of predefined regions of a poly(dimethylsiloxane) (PDMS) micro-fluidic device, with an intentionally chosen large (approximately 1 cm2) internal surface area, we report rapid (10 min), highly localized (6 x 10(-6) cm2), and specific surface-based protein capture from a sample volume (100 microL) containing a low amount of protein (160 attomol in pure buffer and 400 attomol in serum). The design criteria for this surface modification were achieved using QCM-D (quartz crystal microbalance with energy dissipation monitoring) of serum protein adsorption onto PLL-g-PEG-modified oxidized PDMS. Equally good, or almost as good, results were obtained for oxidized SU-8, Topas, and poly(methyl metacrylate) (PMMA), demonstrating the generic potential of PLL-g-PEG for surface modification in various micro-fluidic applications.

Adsorption↗

PubMed2006

Light-induced in situ patterning of DNA-tagged biomolecules and nanoparticles.

We present an in situ method for the selective manipulation of DNA-tagged nano-objects such as vesicles or gold colloids in aqueous solution, at neutral pH. The method makes use of the photosensitizer concept found in photodynamic therapy. Here, single-stranded DNA is immobilized onto a surface via the biotin/streptavidin linkage. If the streptavidin is fluorescently labeled, reactive species will be created during laser-induced photobleaching of the label. These reactive species can then completely or partly suppress the DNA hybridization and cause the removal of the streptavidin. The technique thereby enables a dynamic on-off control over surface density of immobilized DNA-tagged nano-objects. Furthermore, combining this in situ manipulation of DNA with prepatterning of single-stranded DNA in the micro and later in the nano range provides a means for the dynamic patterning required for applications in biosensing and nanotechnology.

Adsorption↗

PubMed2006

Nanopatterns with biological functions.

Both curiosity and a desire for efficiency have advanced our ability to manipulate materials with great precision on the micrometer and, more recently, on the nanometer scale. Certainly, the semiconductor and integrated circuit industry has put the pressure on scientist and engineers to develop better and faster nanofabrication techniques. Furthermore, our curiosity as to how life works, and how it can be improved from a medical perspective, stands to gain a great deal from advances in nanotechnology. Novel nanofabrication techniques are opening up the possibilities for mimicking the inherently nano-world of the cell, i.e., the nanotopographies of the extracellular matrix (ECM) and the nanochemistry presented on both the cell membrane and the ECM. In addition, biosensing applications that rely on fabrication of high-density, precision arrays, e.g., DNA or gene chips and protein arrays, will gain significantly in efficiency and, thus, in usefulness once it becomes possible to fabricate heterogeneous nanoarrays. Clearly, continued advances in nanotechnology are desired and required for advances in biotechnology. In this review, we describe the leading techniques for generating nanopatterns with biological function including parallel techniques such as extreme ultraviolet interference lithography (EUV-IL), soft-lithographic techniques (e.g., replica molding (RM) and microcontact printing (muCP)), nanoimprint lithography (NIL), nanosphere lithography (NSL) (e.g., colloid lithography or colloidal block-copolymer micelle lithography) and the nanostencil technique, in addition to direct-writing techniques including e-beam lithography (EBL), focused ion-beam lithography (FIBL) and dip-pen nanolithography (DPN). Details on how the patterns are generated, how biological function is imparted to the nanopatterns, and examples of how these surfaces can and are being used for biological applications will be presented. This review further illustrates the rapid pace by which advances are being made in the field of nanobiotechnology, owing to an increasing number of research endeavors, for an ever increasing number of applications.

Animals↗

PubMed2005

An aqueous-based surface modification of poly(dimethylsiloxane) with poly(ethylene glycol) to prevent biofouling.

We report a simple modification of poly(dimethylsiloxane) (PDMS) surfaces with poly(ethylene glycol) (PEG) through the adsorption of a graft copolymer, poly(l-lysine)-graft-poly(ethylene glycol) (PLL-g-PEG) from aqueous solution. In this approach, the PDMS surface was treated with oxygen plasma, followed by immersion into aqueous solution containing PLL-g-PEG copolymers. Due to the hydroxyl/carboxylic groups generated on the PDMS surface after oxygen plasma, the polycationic PLL backbone is attracted to the negatively charged surface and PEG side chains exhibit an extended structure. The PEG/aqueous interface generated in this way revealed a near-perfect resistance to nonspecific protein adsorption as monitored by means of optical waveguide lightmode spectroscopy (OWLS) and fluorescence microscopy.

Adsorption↗

PubMed2005

A novel crossed microfluidic device for the precise positioning of proteins and vesicles.

Herein we present a novel way to create arrays of different proteins or lipid vesicles using a crossed microfluidic device. The concept relies on the combination of I) a designated two-step surface chemistry, which allows activation for subsequent binding events, and II) crossing microfluidic channels for the local functionalization by separated laminar streams. Besides its simplicity and cost efficiency, this concept has the advantage that it keeps the proteins in a hydrated environment throughout the experiment. We have demonstrated the feasibility of such a device to create a chessboard pattern of different fluorescently labeled lipid vesicles, which offers the possibility to contain biomolecules, drugs or membrane proteins.

Equipment Design↗

PubMed2005

Effects of ionic strength and surface charge on protein adsorption at PEGylated surfaces.

PEGylated Nb2O5 surfaces were obtained by the adsorption of poly(L-lysine)-g-poly(ethylene glycol) (PLL-g-PEG) copolymers, allowing control of the PEG surface density, as well as the surface charge. PEG (MW 2 kDa) surface densities between 0 and 0.5 nm(-2) were obtained by changing the PEG to lysine-mer ratio in the PLL-g-PEG polymer, resulting in net positive, negative and neutral surfaces. Colloid probe atomic force microscopy (AFM) was used to characterize the interfacial forces associated with the different surfaces. The AFM force analysis revealed interplay between electrical double layer and steric interactions, thus providing information on the surface charge and on the PEG layer thickness as a function of copolymer architecture. Adsorption of the model proteins lysozyme, alpha-lactalbumin, and myoglobin onto the various PEGylated surfaces was performed to investigate the effect of protein charge. In addition, adsorption experiments were performed over a range of ionic strengths, to study the role of electrostatic forces between surface charges and proteins acting through the PEG layer. The adsorbed mass of protein, measured by optical waveguide lightmode spectroscopy (OWLS), was shown to depend on a combination of surface charge, protein charge, PEG thickness, and grafting density. At high grafting density and high ionic strength, the steric barrier properties of PEG determine the net interfacial force. At low ionic strength, however, the electrical double layer thickness exceeds the thickness of the PEG layer, and surface charges "shining through" the PEG layer contribute to protein interactions with PLL-g-PEG coated surfaces. The combination of AFM surface force measurements and protein adsorption experiments provides insights into the interfacial forces associated with various PEGylated surfaces and the mechanisms of protein resistance.

Adsorption↗

PubMed2005

Protein resistance of titanium oxide surfaces modified by biologically inspired mPEG-DOPA.

In the present study, we have utilized X-ray photoelectron spectroscopy (XPS), spectroscopic ellipsometry (ELM), and optical waveguide lightmode spectroscopy (OWLS) to examine the surface adsorption and protein resistance behavior of bio-inspired polymers consisting of poly(ethylene glycol) (PEG) conjugated to peptide mimics of mussel adhesive proteins. Peptides containing up to three residues of 3,4-dihydroxyphenylalanine (DOPA), a key component of mussel adhesive proteins, were conjugated to monomethoxy-terminated PEG polymers. These mPEG-DOPA polymers were found to be highly adhesive to TiO2 surfaces, with quantitative XPS analysis providing useful insight into the binding mechanism. Additionally, the antifouling properties of immobilized PEG were reflected in the excellent resistance of mPEG-DOPA-modified TiO2 surfaces to protein adsorption. Measurements of mPEG-DOPA and human serum adsorption were related in terms of ethylene glycol (EG) surface density and serum mass adsorbed and demonstrated a threshold of approximately 15-20 EG/nm2, above which substantially little protein adsorbs. With respect to surface density of adsorbed PEG and the associated nonfouling behavior of the adlayers, strong parallels exist between the nonfouling properties of the surface-bound mPEG-DOPA polymers and PEG polymers immobilized to surfaces using other approaches. Peptide anchors containing three DOPA residues resulted in PEG surface densities higher than those achieved using several existing PEG immobilization strategies, suggesting that peptide mimics of mussel adhesive proteins may be useful for achieving high densities of protein-resistant polymers on surfaces.

Biomimetic Materials↗

PubMed2004

Micropatterning of DNA-tagged vesicles.

We present a novel concept for the creation of lipid vesicle microarrays based on a patterning approach termed Molecular Assembly Patterning by Lift-off (MAPL). A homogeneous MAPL-based single-stranded DNA microarray was converted into a vesicle array by the use of vesicles tagged with complementary DNAs, permitting sequence-specific coupling of vesicles to predefined surface regions through complementary DNA hybridization. In the multistep process utilized to fulfill this achievement, active spots consisting of PLL-g-PEGbiotin with a resistant PLL-g-PEG background, as provided by the MAPL process, was converted into a DNA array by addition of complexes of biotin-terminated DNA and NeutrAvidin. This was then followed by addition of POPC vesicles tagged with complementary cholesterol-terminated DNA, thus providing specific coupling of vesicles to the surface through complementary DNA hybridization. Quartz crystal microbalance with dissipation (QCM-D) and optical waveguide lightmode spectroscopy monitoring were used to optimize the multistep surface modification process. It was found that the amount of adsorbed biotinDNA-NeutrAvidin complexes decreases with increasing molar ratio of biotinDNA to NeutrAvidin and decreasing ionic strength of the buffer solution. Modeling of the QCM-D data showed that the shape of the immobilized vesicles depends on the amount of available anchoring groups between the vesicles and the surface. Fluorescent microscopy images confirmed the possibility to create well-defined patterns of DNA-tagged, fluorescently labeled vesicles in the micrometer range.

Biotin↗

PubMed2004

Immobilization of the enzyme beta-lactamase on biotin-derivatized poly(L-lysine)-g-poly(ethylene glycol)-coated sensor chips: a study on oriented attachment and surface activity by enzyme kinetics and in situ optical sensing.

Understanding the conformation, orientation, and specific activity of proteins bound to surfaces is crucial for the development and optimization of highly specific and sensitive biosensors. In this study, the very efficient enzyme beta-lactamase is used as a model protein. The wild-type form was genetically engineered by site-directed mutagenesis to introduce single cysteine residues on the surface of the enzyme. The cysteine thiol group is subsequently biotinylated with a dithiothreitol (DTT)-cleavable biotinylation reagent. beta-Lactamase is then immobilized site-specifically via the biotin group on neutral avidin-covered surfaces with the aim to control the orientation of the enzyme molecule at the surface and study its effect on enzymatic activity using Nitrocefin as the substrate. The DTT-cleavable spacer allows the release of the specifically bound enzyme from the surface. Immobilization of the enzyme is performed on a monolayer of the polycationic, biotinylated polymer PLL-g-PEG/PEG-biotin assembled on niobium oxide (Nb2O5) surfaces via neutral avidin as the docking site. Two different assembly protocols, the sequential adsorption of avidin and biotinylated beta-lactamase and the immobilization of preformed complexes of beta-lactamase and avidin, are compared in terms of immobilization efficiency. In situ optical waveguide lightmode spectroscopy and colorimetric analysis of enzymatic activity were used to distinguish between specific and unspecific enzyme adsorption, to sense quantitatively the amount of immobilized enzyme, and to determine Michaelis-Menten kinetics. All tested enzyme variants turned out to be active upon immobilization at the polymeric surface. However, the efficiency of immobilized enzymes relative to the soluble enzymes was reduced about sevenfold, mainly because of impaired substrate (Nitrocefin) diffusion or restricted accessibility of the active site. No significant effect of different enzyme orientations could be detected, probably because the enzymes were attached to the surface through long, flexible PEG chain linkers.

Adsorption↗

PubMed2004

Bovine serum albumin adsorption onto colloidal Al2O3 particles: a new model based on zeta potential and UV-vis measurements.

We investigated the adsorption of bovine serum albumin (BSA) on colloidal Al2O3 particles in an aqueous environment. Changes in the zeta potential of the Al2O3 particles upon the adsorption of BSA were measured using an electro-acoustic technique. The mass of protein adsorbed was determined by using UV-vis spectroscopy. The change of the isoelectric point of the Al2O3 powder-protein suspension was found to be a function of adsorbed protein mass. It was shown that approximately one monolayer of BSA was needed to fully mask the surface and to compromise the charge of Al2O3. From titration experiments it follows that about 30-36% of the negatively charged groups of the protein form bonds with the protonated and charged Al2O3 surface. On the basis of our observations we introduced a new adsorption model for BSA on Al2O3 particles.

Adsorption↗

PubMed2004

The density and refractive index of adsorbing protein layers.

The structure of the adsorbing layers of native and denatured proteins (fibrinogen, gamma-immunoglobulin, albumin, and lysozyme) was studied on hydrophilic TiO(2) and hydrophobic Teflon-AF surfaces using the quartz crystal microbalance with dissipation and optical waveguide lightmode spectroscopy techniques. The density and the refractive index of the adsorbing protein layers could be determined from the complementary information provided by the two in situ instruments. The observed density and refractive index changes during the protein-adsorption process indicated the presence of conformational changes (e.g., partial unfolding) in general, especially upon contact with the hydrophobic surface. The structure of the formed layers was found to depend on the size of the proteins and on the experimental conditions. On the TiO(2) surface smaller proteins formed a denser layer than larger ones and the layer of unfolded proteins was less dense than that adsorbed from the native conformation. The hydrophobic surface induced denaturation and resulted in the formation of thin compact protein films of albumin and lysozyme. A linear correlation was found between the quartz crystal microbalance measured dissipation factor and the total water content of the layer, suggesting the existence of a dissipative process that is related to the solvent molecules present inside the adsorbed protein layer. Our measurements indicated that water and solvent molecules not only influence the 3D structure of proteins in solution but also play a crucial role in their adsorption onto surfaces.

Adsorption↗

PubMed2003

RGD-grafted poly-L-lysine-graft-(polyethylene glycol) copolymers block non-specific protein adsorption while promoting cell adhesion.

A novel class of surface-active copolymers is described, designed to protect surfaces from nonspecific protein adsorption while still inducing specific cell attachment and spreading. A graft copolymer was synthesized, containing poly-(L-lysine) (PLL) as the backbone and substrate binding and poly(ethylene glycol) (PEG) as protein adsorption-resistant pendant side chains. A fraction of the grafted PEG was pendantly functionalized by covalent conjugation to the peptide motif RGD to induce cell binding. The graft copolymer spontaneously adsorbs from dilute aqueous solution onto negatively charged surfaces. The performance of RGD-modified PLL-g-PEG copolymers was analyzed in protein adsorption and cell culture assays. These coatings efficiently blocked the adsorption of serum proteins to Nb(2)O(5) and tissue culture polystyrene while specifically supporting attachment and spreading of human dermal fibroblasts. This surface functionalization technology is expected to be valuable in both the biomaterial and biosensor fields, because different signals can easily be combined, and sterilization and application are straightforward and cost-effective.

Adsorption↗

PubMed2003

Improved stimulation of human dendritic cells by receptor engagement with surface-modified microparticles.

Dendritic cells (DC) need to be stimulated before they can function to initiate immune responses. This study investigates whether microparticles loaded with antibodies specific for selected receptors expressed by DC can induce stimulation of these cells. Plain microparticles were compared with microparticles which were surface-loaded with specific antibodies for human CD40, Fc(gamma), alpha(v)beta3 and alpha(v)beta5 integrin receptors. The antibodies were either physically adsorbed or covalently linked to the microparticle surface. Anti-CD40 antibody and human IgG immobilised on the surface of microparticles induced enhanced DC maturation and activation as expressed by CD83 and CD86 upregulation. IL-12 secretion was induced at a detectable but relatively low level. Both anti-integrin antibodies (anti-alpha(v)beta3 and anti-alpha(v)beta5) induced comparable and considerable maturation of DC, but only anti-alpha(v)beta3 antibody induced significant activation of DC, whereas anti-alpha(v)beta5 did not. The stimulatory effects were most pronounced by employing microparticles with covalently linked antibodies, but were also observed to a minor extent when the antibodies were physically adsorbed to polystyrene and biodegradable poly(lactide-co-glycolide) microparticles. Engineering of microparticles by surface conjugation of specific ligands to stimulate DC may increase the effectiveness of microparticulate vaccine delivery systems.

Antigens, Surface↗