PubMed Health⌕ Search

Biomedical subjects

Jason B Shear

Publications and source records attributed to Jason B Shear.

14 recordsLinked to original sources
PubMed2006

Enzyme-nanoparticle functionalization of three-dimensional protein scaffolds.

Various surface modification techniques have been developed for patterning functional biomolecules in two dimensions, allowing enzymes, antibodies, and other compounds to be localized for applications in bioanalysis and bioengineering. Here, we report a strategy for extending high-resolution patterning of biomolecules to three dimensions. In this approach, three-dimensional protein scaffolds are created by a direct-write process in which multiphoton excitation promotes photochemical cross-linking of protein molecules from aqueous solution within specified volume elements. After scaffold fabrication, protein microstructures are functionalized with enzyme-gold nanoparticle conjugates via a targeting process based in part on electrostatic attraction between the low-isoelectric-point enzyme and the microstructure, fabricated from high-isoelectric-point proteins. High signal-to-background ratios (approximately 20:1) are demonstrated for fluorescent product streams created by dephosphorylation of the fluorogenic compound, fluorescein diphosphate, at microstructures decorated with alkaline phosphatase-gold nanoparticle conjugates. We also demonstrate feasibility for using such structures to quantify substrate concentrations in flowing streams with low-micromolar detection limits and to create sensor suites based on both enzyme-nanoparticle functionalization and intrinsic enzymatic activity of protein scaffolds. These topographically complex sensors and dosing sources have potential applications in microfluidics, sensor array fabrication, and real-time chemical modification of cell culture environments.

Enzymes↗
PubMed2006

Parallel chemical dosing of subcellular targets.

To characterize the role of spatially heterogeneous signaling in cellular function, methods are required for differentially exposing distinct regions of individual cells to externally applied reagents. Although a range of standard approaches exists for generating localized chemical gradients in culture, including puffer pipet spritzing and photolytic release of caged effectors, each is limited in key respects. Here, we report development of a cell-dosing strategy that addresses these limitations, providing the means to create steep gradients of any aqueous-miscible compound at essentially unlimited numbers of sites in parallel. In this approach, cells are cultured on a micrometer-thick polymer membrane that serves as a barrier between two stacked laminar-flow channels: one containing the cell culture and the other serving as a reagent flow cell. By focusing a pulsed laser beam onto one or more selected membrane positions, micrometer-diameter pores can be ablated upstream of desired cellular targets. Nascent pores thus serve as ports of entry into the culture environment for reagent streams capable of modifying subcellular features at positions potentially hundreds of micrometers from ablation sites. Importantly, individual reagent streams also can be rapidly eliminated by photo-cross-linking a protein plug over a selected pore. This versatile strategy for dynamically reshaping the chemical microenvironments in which cells reside should be useful in a variety of cell biology applications, ranging from neurotrophic modulation of neurite pathfinding to stimulation of cellular networks.

Cell Differentiation↗
PubMed2006

Direct-write fabrication of functional protein matrixes using a low-cost Q-switched laser.

We report the use of an inexpensive, small, and "turn-key" Q-switched 532-nm Nd:YAG laser as a source for nonlinear, direct-write protein microfabrication. In this approach, microJoule pulses (pulse widths, approximately 600 ps) are focused using high numerical aperture optics to submicrometer focal spots, creating instantaneous intensities great enough to promote multiphoton excitation of a photosensitizer and subsequent intermolecular cross-linking of protein molecules. By scanning the femtoliter focal volume through reagent solution, extended protein-based structures can be fabricated with precise, three-dimensional topographies. As with earlier studies using a femtosecond titanium:sapphire laser costing more than 100K, physically robust and chemically responsive microstructures can be fashioned rapidly with feature sizes smaller than 0.5 microm, and cross-linking can be achieved using both biologically benign sensitizers (e.g., flavins) and by using the proteins themselves to sensitize cross-linking. We demonstrate in situ fabrication to corral neurite outgrowth and show the ability to functionalize avidin structures with biotinylated reagents, an approach that enables chemical sensing to be performed in specified microenvironments. Characterization of this inexpensive, low-power source will greatly broaden access to direct-write protein microfabrication.

Animals↗
PubMed2005

Quantitation of nicotinamide and serotonin derivatives and detection of flavins in neuronal extracts using capillary electrophoresis with multiphoton-excited fluorescence.

Capillary electrophoresis (CE) with multiphoton-excited fluorescence detection (CE-MPE) allows low-background analysis of spectrally distinct fluorophores using a single long-wavelength laser. Extracts were prepared from immortalized rat raphe nuclei neurons, and were analyzed by CE-MPE. Native fluorescence was detected from reduced nicotinamide adenine dinucleotide (NADH) and its phosphorylated form (NADPH), flavin adenine dinucleotide (FAD), flavin mononucleotide (FMN), riboflavin, serotonin, and 5-hydroxytryptophan (5HTrp). Quantitation of exogenous serotonin (taken up by cells) and endogenous NADH and 5HTrp was possible using internal standards or standard addition. This system should be useful to study monamine oxidase inhibitors (MAOIs) and selective serotonin reuptake inhibitors (SSRIs).

Electrophoresis, Capillary↗
PubMed2005

Catalytic three-dimensional protein architectures.

We demonstrate a strategy for microfabricating catalytically active, three-dimensional matrixes composed of cross-linked protein in cellular and microfluidic environments. In this approach, a pulsed femtosecond laser is used to excite photosensitizers via multiphoton absorption within three-dimensionally defined volumes, a process that promotes cross-linking of protein residue side chains in the vicinity of the laser focal point. In this manner, it is possible to fabricate protein microparticles with dimensions on the order of the multiphoton focal volume (less than 1 microm(3)) or, by scanning the position of a laser focal point relative to a specimen, to generate surface-adherent matrixes or cables that extend through solution for hundreds of micrometers. We show that protein matrixes can be functionalized either through direct cross-linking of enzymes, by decoration of avidin matrixes with biotinylated enzymes, or by cross-linking biotinylated proteins that then are linked to biotinylated enzymes via an avidin couple. Several formats are explored, including microparticles that can be translocated to desired sites of action (including cytosolic positions), protein pads that generate product gradients within cell cultures, and on-column nanoreactors for microfluidic systems. These biomaterial fabrication technologies offer opportunities for studying a variety of cell functions, ranging from single-cell biochemistry and development to perturbation and analysis of small populations of cultured cells.

Animals↗
PubMed2005

Microfabrication of three-dimensional bioelectronic architectures.

The functionality and structural diversity of biological macromolecules has motivated efforts to exploit proteins and DNA as templates for synthesis of electronic architectures. Although such materials offer promise for numerous applications in the fabrication of cellular interfaces, biosensors, and nanoelectronics, identification of techniques for positioning and ordering bioelectronic components into useful patterns capable of sophisticated function has presented a major challenge. Here, we describe the fabrication of electronic materials using biomolecular scaffolds that can be constructed with precisely defined topographies. In this approach, a tightly focused pulsed laser beam capable of promoting protein photo-cross-linking in specified femtoliter volume elements is scanned within a protein solution, creating biomolecular matrices that either remain in integral contact with a support surface or extend as free-standing structures through solution, tethered at their ends. Once fabricated, specific protein scaffolds can be selectively metallized via targeted deposition and growth of metal nanoparticles, yielding high-conductivity bioelectronic materials. This aqueous fabrication strategy opens new opportunities for creating electronic materials in chemically sensitive environments and may offer a general approach for creating microscopically defined inorganic landscapes.

Animals↗
PubMed2004

A microbead array chemical sensor using capillary-based sample introduction: toward the development of an "electronic tongue".

The development of a micromachined fluidic structure for the introduction of liquid samples into a chip-based sensor array composed of individually addressable polymeric microbeads is presented. The micromachined structure consists of micromachined storage cavities combined with a covering glass layer that confines the microbeads and fluidic channels. In our sensor array transduction occurs via optical (colorimetric and fluorescence) changes to receptors and indicator molecules that are covalently attached to termination sites on the polymeric microbeads. Spectral data are acquired for each of the individual microbeads using a charged-coupled device (CCD) allowing for the near-real-time analysis of liquid sample. Hence the micromachined fluidic structure must allow for both optical access to the microbeads and fluid flow through the micromachined cavities that serve as the microreactors/analysis chambers. One of the key parts of the structure is a passive fluid introduction system driven only by capillary force. This simple means of fluid introduction realizes a compact device. The capillary flow on the inlet channel has been studied, and the responses of the microbeads (alizarin complexone) to a liquid sample have been characterized. The test results show that this system is useful in a micro-total-analysis-system (mu-TAS) and biomedical applications.

Biomimetics↗
PubMed2004

Guiding neuronal development with in situ microfabrication.

We report the ability to modify microscopic 3D topographies within dissociated cultures, providing a means to alter the development of neurons as they extend neurites and establish interconnections. In this approach, multiphoton excitation is used to focally excite noncytotoxic photosensitizers that promote protein crosslinking, such as BSA, into matrices having feature sizes >/=250 nm. Barriers, growth lanes, and pinning structures comprised of crosslinked proteins are fabricated under conditions that do not compromise the viability of neurons both on short time scales and over periods of days. In addition, the ability to fabricate functional microstructures from crosslinked avidin enables submicrometer localization of controllable quantities of biotinylated ligands, such as indicators and biological effectors. Feasibility is demonstrated for using in situ microfabrication to guide the contact position of cortical neurons with micrometer accuracy, opening the possibility for engineering well defined sets of synaptic interactions.

Animals↗
PubMed2004

Tracking variations in nicotinamide cofactors extracted from cultured cells using capillary electrophoresis with multiphoton excitation of fluorescence.

Nicotinamide cofactors play numerous roles in cellular metabolic and biosynthetic reactions and intracellular signaling events. Recently, nicotinamide cofactors have been implicated in the function of cellular biological clocks. To gain insight into the possible roles of nicotinamide cofactors in complex time-related events, we have developed a rapid and sensitive method for extraction of NAD(P)(H) from cultured cells, separation of analytes by capillary electrophoresis, and detection by multiphoton excitation of fluorescence. Extraction and quantitation steps have been systematically characterized for optimal pH, detergent, temperature, sonication, filtration, efficiency, accuracy, and reproducibility. The method is suitable for extractions at 2- to 3-h intervals over 1 day or more or as frequently as every hour for shorter durations. Natively fluorescent NAD(P)H are assayed directly, and nonfluorescent NAD(P) are enzymatically reduced to their fluorescent counterparts before analysis. The method yields accurate values for cellular NADP, NADPH, and total NAD(H) levels and relative information on cellular NADH concentration; modification of the procedure allows full quantitation of all relevant species. We conclude that these assays are more suitable than any yet published for tracking variations in nicotinamide cofactor levels over periods of 1 day or more.

Animals↗
PubMed2004

Multiphoton-excited serotonin photochemistry.

We report photochemical and photophysical studies of a multiphoton-excited reaction of serotonin that previously has been shown to generate a photoproduct capable of emitting broadly in the visible spectral region. The current studies demonstrate that absorption of near-infrared light by an intermediate state prepared via three-photon absorption enhances the photoproduct formation yield, with the largest action cross sections ( approximately 10(-19) cm(2)) observed at the short-wavelength limit of the titanium:sapphire excitation source. The intermediate state is shown to persist for at least tens of nanoseconds and likely to be different from a previously reported oxygen-sensitive intermediate. In addition, the two-photon fluorescence action spectrum for the fluorescent photoproduct was determined and found to have a maximum at approximately 780 nm (3.2 eV). A general mechanism for this photochemical process is proposed.

Aluminum Oxide↗
PubMed2003

Microsecond electrophoresis.

Although analysis strategies exist for probing a diverse array of molecular properties, most of these approaches are not amenable to the study of reaction intermediates and other transient species. Separations in particular can provide detailed information on attributes not readily measured by spectroscopy but typically are performed over time scales much longer than the life span of highly unstable compounds. Here we report the development of an electrophoretic strategy that dramatically extends the practical speed limit for fractionations and demonstrate its utility in examining transient hydroxyindole photoproducts. Fluorescent reaction intermediates are optically generated in femtoliter volumes within a flowing reagent stream and are differentially transported at velocities as large as 1.3 m.s(-1), thereby minimizing band variance and allowing multicomponent reaction mixtures to be resolved over separation paths as short as 9 microm. Analyte migration times and band variances do not deviate significantly from basic theory for separations performed with fields that exceed 0.1 MV.cm(-1), indicating that effects from Joule heating are minor. We demonstrate the feasibility of achieving baseline resolution of a binary mixture in <10 micros, nearly 100-fold faster than previously possible. Application of this approach to the study of a range of short-lived molecules should be feasible.

5-Hydroxytryptophan↗
PubMed2002

Enzyme-based sensor arrays for rapid characterization of complex disaccharide solutions.

An enzyme-based sensor array has been developed to detect multiple disaccharides in aqueous solutions. Porous agarose beads, derivatized with enzymes for assaying disaccharides, are localized within wells etched into a silicon chip in a regular 5 x 7 array. Each well is individually addressable and acts as a microanalysis chamber where sample solution passes through the agarose matrix and is exposed to the enzymes. Detection is achieved by observing the increase in absorbance of a quinoneimine dye produced during the reaction. This technique is used to quantify the disaccharides lactose, sucrose, and maltose and the monosaccharide glucose. Preexisting glucose in the sample complicates multicomponent sensing but can be accounted for by including a glucose sensor in the array. This detection strategy is applied to the simultaneous analysis of these sugars in several beverages.

Beverages↗
PubMed2002

Stochastic sensing of IP(3) has far-reaching consequences.

Hagan Bayley's group at Texas A&M University has devised a stochastic sensing methodology for the quantitation of the second messenger inositol 1,4,5-trisphosphate. The unique sensing scheme is very selective and has the potential to measure cytosolic concentrations of IP(3).

Biological Transport↗