PubMed Health⌕ Search

Biomedical subjects

Jay A Labinger

Publications and source records attributed to Jay A Labinger.

12 recordsLinked to original sources
PubMed2006

On the mechanism of the conversion of methanol to 2,2,3-trimethylbutane (triptane) over zinc iodide.

Methanol is converted to a mixture of hydrocarbons by reaction with zinc iodide at 200 degrees C with one highly branched alkane, 2,2,3-trimethylbutane (triptane), being obtained in surprisingly high selectivity. Mechanistic studies implicate a two-stage process, the first involving heterogeneously catalyzed formation of a carbon-carbon-bonded species, probably ethylene, that undergoes homogeneously catalyzed sequential cationic methylation to higher hydrocarbons. The first stage can be bypassed by addition of olefins, higher alcohols, or arenes, which act as initiators. Rationales for the particular activity of zinc iodide and for the selectivity to triptane are proposed.

Journal Article↗
PubMed2006

Kinetics and mechanism of methane, methanol, and dimethyl ether C-H activation with electrophilic platinum complexes.

The relative rates of C-H activation of methane, methanol, and dimethyl ether by [(N-N)PtMe(TFE-d(3))](+) ((N-N) = ArN=C(Me)-C(Me)=NAr; Ar = 3,5-di-tert-butylphenyl, TFE-d(3) = CF(3)CD(2)OD) (2(TFE)) were determined. Methane activation kinetics were conducted by reacting 2(TFE)-(13)C with 300-1000 psi of methane in single-crystal sapphire NMR tubes; clean second-order behavior was obtained (k = 1.6 +/- 0.4 x 10(-3) M(-1) s(-1) at 330 K; k = 2.7 +/- 0.2 x 10(-4) M(-1) s(-1) at 313 K). Addition of methanol to solutions of 2(TFE) rapidly establishes equilibrium between methanol (2(MeOD)) and trifluoroethanol (2(TFE)) adducts, with methanol binding preferentially (K(eq) = 0.0042 +/- 0.0006). C-H activation gives [(N-N)Pt(CH(2)OD)(MeOD)](+) (4), which is unstable and reacts with [(RO)B(C(6)F(5))(3)](-) to generate a pentafluorophenyl platinum complex. Analysis of kinetics data for reaction of 2 with methanol yields k = 2.0 +/- 0.2 x 10(-3) M(-1) s(-1) at 330 K, with a small kinetic isotope effect (k(H)/k(D) = 1.4 +/- 0.1). Reaction of dimethyl ether with 2(TFE) proceeds similarly (K(eq) = 0.023 +/- 0.002, 313 K; k = 5.5 +/- 0.5 x 10(-4) M(-1) s(-1), k(H)/k(D) = 1.5 +/- 0.1); the product obtained is a novel bis(alkylidene)-bridged platinum dimer, [(diimine)Pt(mu-CH(2))(mu-(CH(OCH(3)))Pt(diimine)](2+) (5). Displacement of TFE by a C-H bond appears to be the rate-determining step for all three substrates; comparison of the second-order rate constants (k((methane))/k((methanol)) = 1/1.3, 330 K; k((methane))/k((dimethy)(l e)(ther)) = 1/2.0, 313 K) shows that this step is relatively unselective for the C-H bonds of methane, methanol, or dimethyl ether. This low selectivity agrees with previous estimates for oxidations with aqueous tetrachloroplatinate(II)/hexachloroplatinate(IV), suggesting a similar rate-determining step for those reactions.

Journal Article↗
PubMed2004

Kinetic and thermodynamic preferences in aryl vs benzylic C-H bond activation with cationic Pt(II) complexes.

Anhydrous cationic Pt(II) complexes [(NN)Pt(CH3)(CF3CD2OD)]+ (1, NN = ArN=C(Me)-C(Me)=NAr), which are obtained by reaction of (NN)Pt(CH3)2 with B(C6F5)3 in CF3CD2OD, activate C-H bonds of benzene and methylbenzenes, with enhanced reactivity compared to the previously prepared equilibrium mixtures with the (thermodynamically favored) aquo complexes. For methylbenzenes (toluene, p-xylene, mesitylene), activation at the aromatic and benzylic positions are kinetically competitive, but the product of the latter is strongly favored thermodynamically. This unusual trend is attributed to formation of eta3-benzyl structures, which can be observed spectroscopically for 1,4-diethylbenzene activation.

Benzyl Compounds↗
PubMed2004

Pyridinium-derived N-heterocyclic carbene complexes of platinum: synthesis, structure and ligand substitution kinetics.

A series of [(R-iso-BIPY)Pt(CH(3))L ](+)X(-) complexes [R-iso-BIPY = N-(2-pyridyl)-R-pyridine-2-ylidene; (R = 4-H, 1; 4-tert-butyl, 2; 4-dimethylamino, 3; 5-dimethylamino, 4); L = SMe(2), b; dimethyl sulfoxide (DMSO), c; carbon monoxide (CO), d; X = OTf(-) = trifluoromethanesulfonate and/or [BPh(4)](-)] were synthesized by cyclometalation of the [R-iso-BIPY-H](+)[OTF](-) salts 1a-4a ([R-iso-BIPY-H](+) = N-(2-pyridyl)-R-pyridinium) with dimethylplatinum-micro-dimethyl sulfide dimer. X-ray crystal structures for 1b, 2c-4c as well as complexes having bipyridyl and cyclometalated phenylpyridine ligands, [(bipy)Pt(CH(3))(DMSO)](+) (5c) and (C(11)H(8)N)Pt(CH(3))(DMSO) (6c), have been determined. The pyridinium-derived N-heterocyclic carbene complexes display localized C-C and C-N bonds within the pyridinium ligand that are indicative of carbene pi-acidity. The significantly shortened platinum-carbon distance, for "parent" complex 1b, together with NMR parameters and the nu(CO) values for carbonyl cations 1d-4d support a degree of Pt-C10 multiple bonding, increasing in the order 3 < 4 < 2 < 1. Degenerate DMSO exchange kinetics have been determined to establish the nature and magnitude of the trans-labilizing ability of these new N-heterocyclic carbene ligands. Exceptionally large second-order rate constants (k(2) = 6.5 +/- 0.4 M(-1).s(-1) (3c) to 2300 +/- 500 M(-1).s(-1) (1c)) were measured at 25 degrees C using (1)H NMR magnetization transfer kinetics and variable temperature line shape analysis. These rate constants are as much as 4 orders of magnitude greater than those of a series of structurally similar cationic bis(nitrogen)-donor complexes [(N-N)Pt(CH(3))(DMSO)](+) reported earlier, and a factor of 32 to 1800 faster than an analogous charge neutral complex derived from cyclometalated 2-phenylpyridine, (C(11)H(8)N)Pt(CH(3))(DMSO) (k(2) = 0.21 +/- 0.02 M(-1).s(-1) (6c)). The differences in rate constant are discussed in terms of ground state versus transition state energies. Comparison of the platinum-sulfur distances with second order rate constants suggests that differences in the transition-state energy are largely responsible for the range of rate constants measured. The pi-accepting ability and trans-influence of the carbene donor are proposed as the origin of the large acceleration in associative ligand substitution rate.

Journal Article↗
PubMed2004

Mechanistic studies of the ethylene trimerization reaction with chromium-diphosphine catalysts: experimental evidence for a mechanism involving metallacyclic intermediates.

A system for catalytic trimerization of ethylene utilizing CrCl3(THF)3 and a diphosphine ligand PNPOMe [= (o-MeO-C6H4)2PN(Me)P(o-MeO-C6H4)2] has been investigated. The coordination chemistry of chromium with PNPOMe has been explored, and (PNPOMe)CrCl3 and (PNPOMe)CrPh3 (3) have been synthesized by ether displacement from chromium(III) precursors. Salt metathesis of (PNPOMe)CrCl3 with o,o'-biphenyldiyl Grignard affords (PNPOMe)Cr(o,o'-biphenyldiyl)Br (4). Activation of 3 with H(Et2O)2B[C6H3(CF3)2]4 or 4 with NaB[C6H3(CF3)2]4 generates a catalytic system and trimerizes a 1:1 mixture of C2D4 and C2H4 to give isotopomers of 1-hexene without H/D scrambling (C6D12, C6D8H4, C6D4H8, and C6H12 in a 1:3:3:1 ratio). The lack of crossover supports a mechanism involving metallacyclic intermediates. The mechanism of the ethylene trimerization reaction has also been studied by the reaction of trans-, cis-, and gem-ethylene-d2 with 4 upon activation with NaB[C6H3(CF3)2]4.

Journal Article↗
PubMed2003

C-H bond activation by unsymmetrical 2-(N-arylimino)pyrrolide Pt complexes: geometric effects on reactivity.

Reactions of chloroplatinum methyl complexes with N-(arylimino)pyrrolide anions afford cis and trans neutral platinum methyl complexes. Isomers with methyl trans to the pyrrolide nitrogen activate benzene C-H bonds at 85 degrees C more than 80 times faster than the corresponding cis isomer. In addition, reactions of platinum dimethyl complexes with N-(arylimino)pyrroles (Ar = 4-substituted phenyl) in C6D6 at ambient temperature give unlabeled methane and cis methyl complex containing heavily deuterated Pt-Me. In contrast, bulky aryl substituents give methane isotopomers and trans-Pt-Ph product. The origins of these observations are discussed.

Journal Article↗
PubMed2003

Catalytic alcoholysis of tetramethylsilane via Pt-mediated C-H bond activation.

Tetramethylsilane reacts with 2,2,2-trifluoroethanol (TFE) in the presence of a cationic platinum(II) catalyst [(NN)PtMe(TFE)]+ (NN = 1,2-bis(3,5-dimethylphenylimino)butane). Catalytic Si-C bond heterolysis results in the formation of the trimethylsilyl ether, Me3SiOCH2CF3, accompanied by liberation of one equivalent of methane. Preliminary experiments suggest that a rate-determining C-H bond activation precedes rapid attack by solvent at silicon to yield the silyl ether product and regenerate the active platinum methyl cation.

Alcohols↗
PubMed2002

Structural and mechanistic investigations of the oxidation of dimethylplatinum(II) complexes by dioxygen.

The oxidation of (tmeda)Pt(II)(CH(3))(2) (1, tmeda = N,N,N',N'-tetramethylethylenediamine) to (tmeda)Pt(IV)(OH)(OCH(3))(CH(3))(2) (3) by dioxygen in methanol proceeds via a two-step mechanism. The initial reaction between (tmeda)Pt(CH(3))(2) and dioxygen yields a hydroperoxoplatinum(IV) intermediate, (tmeda)Pt(OOH)(OCH(3))(CH(3))(2) (2), which reacts with a second equivalent of (tmeda)Pt(CH(3))(2) to afford the final product 3. Both 2 and 3 have been fully characterized, including X-ray crystallographic structure determinations. The effect of ligand variation on the oxidation of several dimethylplatinum(II) complexes by 2 as well as by dioxygen has been examined.

Journal Article↗
PubMed2002

Activation volume measurement for C[bond]H activation. Evidence for associative benzene substitution at a platinum(II) center.

The reaction of the platinum(II) methyl cation [(N-N)Pt(CH(3))(solv)](+) (N-N = ArN[double bond]C(Me)C(Me)[double bond]NAr, Ar = 2,6-(CH(3))(2)C(6)H(3), solv = H(2)O (1a) or TFE = CF(3)CH(2)OH (1b)) with benzene in TFE/H(2)O solutions cleanly affords the platinum(II) phenyl cation [(N-N)Pt(C(6)H(5))(solv)](+) (2). High-pressure kinetic studies were performed to resolve the mechanism for the entrance of benzene into the coordination sphere. The pressure dependence of the overall second-order rate constant for the reaction resulted in Delta V(++) = -(14.3 +/- 0.6) cm(3) mol(-1). Since the overall second order rate constant k = K(eq)k(2), Delta V(++) = Delta V degrees (K(eq)) + Delta V(++)(k(2)). The thermodynamic parameters for the equilibrium constant between 1a and 1b, K(eq) = [1b][H(2)O]/[1a][TFE] = 8.4 x 10(-4) at 25 degrees C, were found to be Delta H degrees = 13.6 +/- 0.5 kJ mol(-1), Delta S degrees = -10.4 +/- 1.4 J K(-1) mol(-1), and Delta V degrees = -4.8 +/- 0.7 cm(3) mol(-1). Thus DeltaV(++)(k(2)) for the activation of benzene by the TFE solvento complex equals -9.5 +/- 1.3 cm(3) mol(-1). This significantly negative activation volume, along with the negative activation entropy for the coordination of benzene, clearly supports the operation of an associative mechanism.

Journal Article↗
PubMed2002

Understanding and exploiting C-H bond activation.

The selective transformation of ubiquitous but inert C H bonds to other functional groups has far-reaching practical implications, ranging from more efficient strategies for fine chemical synthesis to the replacement of current petrochemical feedstocks by less expensive and more readily available alkanes. The past twenty years have seen many examples of C-H bond activation at transition-metal centres, often under remarkably mild conditions and with high selectivity. Although profitable practical applications have not yet been developed, our understanding of how these organometallic reactions occur, and what their inherent advantages and limitations for practical alkane conversion are, has progressed considerably. In fact, the recent development of promising catalytic systems highlights the potential of organometallic chemistry for useful C-H bond activation strategies that will ultimately allow us to exploit Earth's alkane resources more efficiently and cleanly.

Alkanes↗
PubMed2002

C [bond] H activation by cationic platinum(II) complexes: ligand electronic and steric effects.

A series of bis(aryl)diimine-ligated methyl complexes of Pt(II) with various substituted aryl groups has been prepared. The cationic complexes [(ArN=CR [bond] CR=NAr)PtMe(L)](+)[BF(4)](-) (Ar = aryl; R = H, CH(3); L = water, trifluoroethanol) react smoothly with benzene at approximately room temperature in trifluoroethanol solvent to yield methane and the corresponding phenyl Pt(II) cations, via Pt(IV)-methyl-phenyl-hydrido intermediates. The reaction products of methyl-substituted benzenes suggest an inherent reactivity preference for aromatic over benzylic C [bond] H activation, which can however be overridden by steric effects. For the reaction of benzene with cationic Pt(II) complexes bearing 3,5-disubstituted aryl diimine ligands, the rate-determining step is C [bond] H activation, whereas for the more sterically crowded analogues with 2,6-dimethyl-substituted aryl groups, benzene coordination becomes rate-determining. This switch is manifested in distinctly different isotope scrambling and kinetic deuterium isotope effect patterns. The more electron-rich the ligand is, as assayed by the CO stretching frequency of the corresponding carbonyl cationic complex, the faster the rate of C [bond] H activation. Although at first sight this trend appears to be at odds with the common description of this class of reaction as electrophilic, the fact that the same trend is observed for the two different series of complexes, which have different rate-determining steps, suggests that this finding does not reflect the actual C [bond] H activation process, but rather reflects only the relative ease of benzene displacing a ligand to initiate the reaction; that is, the change in rates is mostly due to a ground-state effect. The stability of the aquo complex ground state in equilibrium with the solvento complex increases as the diimine ligand is made more electron-withdrawing. Several lines of evidence, including the mechanism of degenerate acetonitrile exchange for the methyl-acetonitrile Pt(II) cations in alcohol solvents, suggest that associative substitution pathways operate to get the hydrocarbon substrate into, and out of, the coordination sphere; that is, the mechanism of benzene substitution proceeds by a solvent (TFE)-assisted associative pathway.

Journal Article↗