Biomedical subjects

Jayanth Panyam

Publications and source records attributed to Jayanth Panyam.

12 recordsLinked to original sources

PubMed2006

Susceptibility of nanoparticle-encapsulated paclitaxel to P-glycoprotein-mediated drug efflux.

Overexpression of P-glycoprotein (P-gp) is a key factor contributing to the development of multidrug resistance (MDR) in cancer cells. The objective of the study is to investigate whether a P-gp substrate, paclitaxel, delivered to MDR tumor cells in poly(d,l-lactide-co-glycolide) (PLGA) nanoparticles is susceptible to P-gp - mediated drug efflux. Paclitaxel-loaded nanoparticles were formulated by emulsion-solvent evaporation technique. Nanoparticles had a mean hydrodynamic diameter of about 195nm, and demonstrated sustained release of paclitaxel. In vitro cell culture studies indicated that paclitaxel nanoparticles result in sustained, dose-dependent and significant cytotoxicity in drug-sensitive MCF-7 tumor cells but not in drug-resistant NCI-ADR/RES cells. Resistance to nanoparticle-encapsulated paclitaxel was reversed by verapamil, a P-gp inhibitor. Further, sustained inhibition of P-gp was necessary for sustaining the cytotoxicity of nanoparticle-encapsulated paclitaxel in drug-resistant cells. Inhibition of P-gp by verapamil did not significantly affect the uptake or retention of nanoparticles in drug-resistant cells. In conclusion, our studies suggest that P-gp substrates, such as paclitaxel, delivered to MDR cells by PLGA nanoparticles, are susceptible to efflux by P-gp. Inhibition of P-gp restores sensitivity to paclitaxel; however, sustained inhibition of P-gp is required for sustained therapeutic efficacy of nanoparticle-encapsulated drug.

ATP Binding Cassette Transporter, Subfamily B, Mem↗

PubMed2004

Sustained cytoplasmic delivery of drugs with intracellular receptors using biodegradable nanoparticles.

Efficient cytoplasmic delivery of therapeutic agents is especially important for drugs with an intracellular site of action for elicitation of a maximal therapeutic effect. In this study, we demonstrate the efficacy of biodegradable nanoparticles for cytoplasmic delivery of dexamethasone, a glucocorticoid, whose site of action is intracellular. Equal doses of two formulations of drug-loaded nanoparticles releasing different doses of the encapsulated drug were tested for antiproliferative activity in vascular smooth muscle cells. The antiproliferative activity of the drug was significantly greater and sustained with nanoparticles that released a higher dose of the drug than with nanoparticles which released a lower dose of the drug. The greater antiproliferative activity of the nanoparticles that released a higher dose of the drug correlated with sustained and higher intracellular drug levels. The antiproliferative activity of the drug in solution was lower and relatively transient compared to that with drug-loaded nanoparticles. The mechanism of inhibition of cell proliferation was mediated through inhibition of cell-cycle progression with a relatively higher percentage of cells in the G0/G1 arrest phase in the group that was treated with drug-loaded nanoparticles compared to that treated with the drug in solution. Results of the study thus suggest that the dose and duration of a drug's availability at the intracellular site of action determine its therapeutic efficacy. In conclusion, biodegradable nanoparticles could be used as an effective delivery mechanism for sustained intracellular delivery of different therapeutic agents.

Apoptosis↗

PubMed2004

Solid-state solubility influences encapsulation and release of hydrophobic drugs from PLGA/PLA nanoparticles.

Biodegradable nanoparticles formulated from poly(D,L-lactide-co-glycolide) (PLGA) and polylactide (PLA) polymers are being extensively investigated for various drug delivery applications. In this study, we hypothesize that the solid-state solubility of hydrophobic drugs in polymers could influence their encapsulation and release from nanoparticles. Dexamethasone and flutamide were used as model hydrophobic drugs. A simple, semiquantitative method based on drug-polymer phase separation was developed to determine the solid-state drug-polymer solubility. Nanoparticles using PLGA/PLA polymers were formulated using an emulsion-solvent evaporation technique, and were characterized for size, drug loading, and in vitro release. X-ray powder diffraction (XRD) and differential scanning calorimetry (DSC) were used to determine the physical state of the encapsulated drug. Results demonstrated that the solid-state drug-polymer solubility depends on the polymer composition, molecular weight, and end-functional groups (ester or carboxyl) in polymer chains. Higher solid-state drug-polymer solubility resulted in higher drug encapsulation in nanoparticles, but followed an inverse correlation with the percent cumulative drug released. The XRD and DSC analyses demonstrated that the drug encapsulated in nanoparticles was present in the form of a molecular dispersion (dissolved state) in the polymer, whereas in microparticles, the drug was present in both molecular dispersion and crystalline forms. In conclusion, the solid-state drug-polymer solubility affects the nanoparticle characteristics, and thus could be used as an important preformulation parameter.

Drug Compounding↗

PubMed2004

Targeting intracellular targets.

Many therapeutic agents have intracellular compartments as their site of action. Targeted delivery of these agents to their specific intracellular targets could result in enhanced therapeutic efficacy and reduced toxicity. Various carriers have been shown useful in targeted delivery of different classes of therapeutic agents. Among these carriers, biodegradable nanoparticles formulated from biocompatible polymers poly(D,L-lactide-co-glycolide) (PLGA) and polylactide (PLA) have shown the potential for sustained intracellular delivery of different therapeutic agents. In this review, we discuss different intracellular targets, barriers to intracellular delivery, mechanism and pathways of intracellular delivery, and various carriers and approaches that have been investigated for intracellular drug delivery.

Animals↗

PubMed2003

Polymer degradation and in vitro release of a model protein from poly(D,L-lactide-co-glycolide) nano- and microparticles.

The objective of the study was to investigate the effect of particle size of nano- and microparticles formulated from poly(D,L-lactide-co-glycolide) (50:50 PLGA) on polymer degradation and protein release. Since the surface area to volume ratio is inversely proportional to the particle size, it is hypothesized that the particle size would influence the polymer degradation as well as the release of the encapsulated protein. PLGA nano- and microparticles of approximate mean diameters of 0.1, 1 and 10 microm, containing bovine serum albumin as a model protein, were formulated using a multiple water-in-oil-in-water emulsion solvent evaporation technique. These particles were incubated at 37 degrees C in phosphate-buffered saline (pH 7.4, 154 mM) and the particles were characterized at various time points for molecular weight of polymer, surface-associated polyvinyl alcohol content (PVA), and the particle surface topology using scanning electron microscopy. The supernatants from the above study were analyzed for the released protein and PVA content. Polymer degradation was found to be biphasic in both nano- and microparticles, with an initial rapid degradation for 20-30 days followed by a slower degradation phase. The 0.1 microm diameter nanoparticles demonstrated relatively higher polymer degradation rate (P<0.05) during the initial phase as compared to the larger size microparticles (first order degradation rate constants of 0.028 day(-1), 0.011 day(-1) and 0.018 day(-1) for 0.1, 1 and 10 microm particles, respectively), however the degradation rates were almost similar (0.008 to 0.009 day(-1)) for all size particles during the later phase. All size particles maintained their structural integrity during the initial degradation phase; however, this was followed by pore formation, deformation and fusion of particles during the slow degradation phase. Protein release from 0.1 and 1 microm particles was greater than that from 10 microm size particles. In conclusion, the polymer degradation rates in vitro were not substantially different for different size particles despite a 10- and 100-fold greater surface area to volume ratio for 0.1 microm size nanoparticles as compared to 1 and 10 microm size microparticles, respectively. Relatively higher amounts of the surface-associated PVA found in the smaller-size nanoparticles (0.1 microm) as compared to the larger-size microparticles could explain some of the observed degradation results with different size particles.

Animals↗

PubMed2003

Fluorescence and electron microscopy probes for cellular and tissue uptake of poly(D,L-lactide-co-glycolide) nanoparticles.

Nanoparticles formulated from poly(D,L-lactide-co-glycolide) (PLGA) and poly(lactide) (PLA) are being extensively investigated for different therapeutic applications such as for sustained drug, vaccine, and gene delivery. For many of these applications, it is necessary to study the intracellular distribution as well as the tissue uptake of nanoparticles to optimize the efficacy of the encapsulated therapeutic agent. Fluorescence and electron microscopic techniques are usually used for the above purposes. Colloidal gold particles and fluorescent polystyrene, which are generally used as model particles for electron and fluorescence microscopy, respectively, may not be suitable alternatives to PLGA/PLA nanoparticles for these studies mainly because of the differences in their physical properties and also because they do not contain any therapeutic agent. The aim of the present study was to develop and characterize PLGA nanoparticle formulations that would be suitable for confocal/fluorescence and transmission electron microscopic (TEM) studies. Towards this objective, PLGA nanoparticles containing 6-coumarin as a fluorescent marker and osmium tetroxide as an electron microscopic marker with bovine serum albumin (BSA) as a model protein were formulated. Different physical properties of marker-loaded nanoparticles such as particle size, zeta potential, residual PVA content and protein-loading were compared with those of unloaded nanoparticles and were found to be not significantly different. Furthermore, marker-loaded nanoparticle formulations were non-toxic to the cells as unloaded nanoparticles. Nanoparticles loaded with 6-coumarin were found to be useful for studying intracellular nanoparticle uptake and distribution using confocal microscopy while osmium tetroxide-loaded nanoparticles were found to be useful for studying nanoparticle uptake and distribution in cells and tissue using TEM. It was concluded that 6-coumarin and osmium tetroxide could serve as useful fluorescence and electron microscopy probes, respectively, for incorporation into nanoparticles to study their cellular and tissue distribution.

Cells, Cultured↗

PubMed2003

Biodegradable nanoparticles for drug and gene delivery to cells and tissue.

Biodegradable nanoparticles formulated from poly (D,L-lactide-co-glycolide) (PLGA) have been extensively investigated for sustained and targeted/localized delivery of different agents including plasmid DNA, proteins and peptides and low molecular weight compounds. Research about the mechanism of intracellular uptake of nanoparticles, their trafficking and sorting into different intracellular compartments, and the mechanism of enhanced therapeutic efficacy of nanoparticle-encapsulated agent at cellular level is more recent and is the primary focus of the review. Recent studies in our laboratory demonstrated rapid escape of PLGA nanoparticles from the endo-lysosomal compartment into cytosol following their uptake. Based on the above mechanism, various potential applications of nanoparticles for delivery of therapeutic agents to the cells and tissue are discussed.

Absorbable Implants↗

PubMed2003

Dynamics of endocytosis and exocytosis of poly(D,L-lactide-co-glycolide) nanoparticles in vascular smooth muscle cells.

PURPOSE: The purpose of this work was to characterize the process of endocytosis, exocytosis, and intracellular retention of poly (D,L-lactide-co-glycolide) nanoparticles in vitro using human arterial vascular smooth muscle cells (VSMCs). METHODS: Nanoparticles containing bovine serum albumin (BSA) as a model protein and 6-coumarin as a fluorescent marker were formulated by a double emulsion-solvent evaporation technique. The endocytosis and exocytosis of nanoparticles in VSMCs were studied using confocal microscopy and their intracellular uptake and retention were determined quantitatively using high-performance liquid chromatography. RESULTS: Cellular uptake of nanoparticles (mean particle size 97 +/- 3 nm) was a concentration-, time-, and energy-dependent endocytic process. Confocal microscopy demonstrated that nanoparticles were internalized rapidly, with nanoparticles seen inside the cells as early as within 1 min after incubation. The nanoparticle uptake increased with incubation time in the presence of nanoparticles in the medium; however, once the extracellular nanoparticle concentration gradient was removed, exocytosis of nanoparticles occurred with about 65% of the internalized fraction undergoing exocytosis in 30 min. Exocytosis of nanoparticles was slower than the exocytosis of a fluid phase marker, Lucifer yellow. Furthermore, the exocytosis of nanoparticles was reduced after the treatment of cells with the combination of sodium azide and deoxyglucose, suggesting that exocytosis of nanopartides is an energy-dependent process. The nanoparticle retention increased with increasing nanoparticle dose in the medium but the effect was relatively less significant with the increase in incubation time. Interestingly, the exocytosis of nanoparticles was almost completely inhibited when the medium was depleted of serum. Further studies suggest that the addition of BSA in the serum free medium with or without platelet derived growth factor (PDGF) induced exocytosis of nanoparticles. The above result suggests that the protein in the medium is either adsorbed onto nanoparticles and/or carried along with nanoparticles inside the cells, which probably interacts with the exocytic pathway and leads to greater exocytosis of nanoparticles. CONCLUSIONS: The study demonstrated that endocytosis and exocytosis of nanoparticles are dynamic and energy-dependent processes. Better understanding of the mechanisms of endocytosis and exocytosis, studies determining the effect of nanoparticle formulation and composition that may affect both the processes, and characterization of intracellular distribution of nanoparticles with surface modifications would be useful in exploring nanoparticles for intracellular delivery of therapeutic agents.

Cell Membrane↗

PubMed2002

Size-dependency of nanoparticle-mediated gene transfection: studies with fractionated nanoparticles.

Nanoparticles formulated from biodegradable polymers such as poly (lactic acid) and poly (D,L-lactide-co-glycolide) (PLGA) are being extensively investigated as non-viral gene delivery systems due to their sustained release characteristics and biocompatibility. PLGA nanoparticles for DNA delivery are mainly formulated using an emulsion-solvent evaporation technique. However, this formulation procedure results in the formation of particles with heterogeneous size distribution. The objective of the present study was to determine the relative transfectivity of the smaller- and the larger-sized fractions of nanoparticles in cell culture. PLGA nanoparticles containing a plasmid DNA encoding luciferase protein as a marker were formulated by a multiple emulsion-solvent evaporation method (mean particle diameter = 97 +/- 3 nm) and were fractionated using a membrane (pore size: 100 nm) filtration technique. The particles that passed through the membrane were designated as the smaller-sized nanoparticles (mean diameter = 70 +/- 2 nm) and the fraction that was retained on the membrane as the larger-sized nanoparticles (mean diameter = 202 +/- 9 nm). The smaller-sized nanoparticles showed a 27-fold higher transfection than the larger-sized nanoparticles in COS-7 cell line and a 4-fold higher transfection in HEK-293 cell line. The surface charge (zeta potential), cellular uptake, and the DNA release were almost similar for the two fractions of nanoparticles, suggesting that some other yet unknown factor(s) is responsible for the observed differences in the transfection levels. The results suggest that the particle size is an important factor, and that the smaller-sized fraction of the nanoparticle formulation predominantly contributes towards their transfection.

Biocompatible Materials↗

PubMed2002

Residual polyvinyl alcohol associated with poly (D,L-lactide-co-glycolide) nanoparticles affects their physical properties and cellular uptake.

Polyvinyl alcohol (PVA) is the most commonly used emulsifier in the formulation of poly lactide and poly (D,L-lactide-co-glycolide) (PLGA) polymeric nanoparticles. A fraction of PVA remains associated with the nanoparticles despite repeated washing because PVA forms an interconnected network with the polymer at the interface. The objective of this study was to determine the parameters that influence the amount of residual PVA associated with PLGA nanoparticles and its effect on the physical properties and cellular uptake of nanoparticles. Nanoparticles were formulated by a multiple emulsion-solvent evaporation technique using bovine serum albumin (BSA) as a model protein. The parameters that affected the amount of residual PVA include the concentration of PVA and the type of organic solvent used in the emulsion. The residual PVA, in turn, influenced different pharmaceutical properties of nanoparticles such as particle size, zeta potential, polydispersity index, surface hydrophobicity, protein loading and also slightly influenced the in vitro release of the encapsulated protein. Importantly, nanoparticles with higher amount of residual PVA had relatively lower cellular uptake despite their smaller particle size. It is proposed that the lower intracellular uptake of nanoparticles with higher amount of residual PVA could be related to the higher hydrophilicity of the nanoparticle surface. In conclusion, the residual PVA associated with nanoparticles is an important formulation parameter that can be used to modulate the pharmaceutical properties of PLGA nanoparticles.

Biocompatible Materials↗

PubMed2002

Rapid endo-lysosomal escape of poly(DL-lactide-co-glycolide) nanoparticles: implications for drug and gene delivery.

The endo-lysosomal escape of drug carriers is crucial to enhancing the efficacy of their macromolecular payload, especially the payloads that are susceptible to lysosomal degradation. Current vectors that enable the endo-lysosomal escape of macromolecules such as DNA are limited by their toxicity and by their ability to carry only limited classes of therapeutic agents. In this paper, we report the rapid (<10 min) endo-lysosomal escape of biodegradable nanoparticles (NPs) formulated from the copolymers of poly(DL-lactide-co-glycolide) (PLGA). The mechanism of rapid escape is by selective reversal of the surface charge of NPs (from anionic to cationic) in the acidic endo-lysosomal compartment, which causes the NPs to interact with the endo-lysosomal membrane and escape into the cytosol. PLGA NPs are able to deliver a variety of therapeutic agents, including macromolecules such as DNA and low molecular weight drugs such as dexamethasone, intracellularly at a slow rate, which results in a sustained therapeutic effect. PLGA has a number of advantages over other polymers used in drug and gene delivery including biodegradability, biocompatibility, and approval for human use granted by the U.S. Food and Drug Administration. Hence PLGA is well suited for sustained intracellular delivery of macromolecules.

Biological Transport↗

PubMedDate not supplied

Nanoparticles for cellular drug delivery: mechanisms and factors influencing delivery.

Polymeric nanoparticles have demonstrated enormous potential as cellular drug delivery vehicles. Nanoparticles improve drug's stability as well as its availability and retention at the target intracellular site of action. Therapeutic efficacy of nanoparticles can be further enhanced by conjugating specific ligands to nanoparticle surface. Ligand conjugation can also be used to favorably modify the intracellular disposition of nanoparticles. A number of ligands are available for this purpose; use of a specific ligand depends on the target cell, the material used for nanoparticle formulation, and the chemistry available for ligand-nanoparticle conjugation. Cellular drug delivery using nanoparticles is also affected by clearance through the reticuloendothelial system. In this paper, we review the recent progress on our understanding of physicochemical factors that affect the cellular uptake of nanoparticles and the different cellular processes that could be exploited to enhance nanoparticle uptake into cells.

Cell Physiological Phenomena↗