Biomedical subjects

Jean-François Gohy

Publications and source records attributed to Jean-François Gohy.

11 recordsLinked to original sources

PubMed2007

Formation of vesicles in block copolymer-fluorinated surfactant complexes.

Spherical micellar aggregates have been obtained in chloroform by mixing poly(styrene)-block-poly(4-vinylpyridine) (PS-b-P4VP) diblock copolymers with perfluorinated surfactants (FS) bearing a carboxylic acid head. These micellar aggregates are resulting from the self-assembly of the insoluble P4VP/fluorinated complexes into a core surrounded by the soluble PS coronal chains. Their characteristic features have been studied as a function of various parameters including the composition of the PS-b-P4VP copolymer, the tail length of the fluorinated surfactant, the 4VP/FS molar ratio, the number of carboxylic acid group (1 or 2) on the surfactant, the presence of the PS block and of the fluorine atoms on the surfactant. Dilution of these initial micellar aggregates triggers a morphological reorganization resulting in the formation of more stable vesicles. The extent of this morphological transition is related to the solubility of the P4VP/fluorinated complexes during the dilution process. This transition is complete for short P4VP/FS complexes, incomplete for long P4VP/FS complexes, and not observed whenever an alpha,omega-difunctional FS is used in P4VP/FS complexes, leading to a cross-linked core. Finally, the spheres-to-vesicles transition has been advantageously used in order to encapsulate molecules, as demonstrated by confocal fluorescence microscopy.

Journal Article↗

PubMed2006

Tuning the hydrophilicity of gold nanoparticles templated in star block copolymers.

We report on a simple procedure to tune the hydrophilicity of hybrid gold nanoparticles. The nanoparticles have been prepared in the core of a poly(ethylene glycol)-block-poly(epsilon-caprolactone) (PEG-b-PCL) five-arm star block copolymer. A hydrophilic corona was then added to these hybrid gold nanoparticles by direct chemisorption of trithiocarbonate-containing poly(acrylic acid) chains. These polymers were synthesized by RAFT polymerization with a trithiocarbonate as the chain-transfer agent. The efficiency of the grafting was evidenced by TEM, AFM, and DLS and by the successful transfer of these nanoparticles from organic solvent to water.

Acrylic Resins↗

PubMed2006

Solvent-induced morphological transition in core-cross-linked block copolymer micelles.

Microwave-assisted polymerization has been utilized to synthesize amphiphilic poly(2-ethyl-2-oxazoline-block-2-"soy alkyl"-2-oxazoline) diblock copolymers (PEtOx-PSoyOx). The amphiphilic block copolymers have been used to prepare aqueous spherical micelles consisting of a PEtOx corona and a PSoyOx core, which have been further cross-linked by UV irradiation. The morphology of these cross-linked micelles has been shown to reversibly change from spheres to short rods referred to as rice grains whenever the micelles were transferred from water into acetone, a nonselective solvent for the constituent blocks. This morphological transition has been attributed to the swelling of the slightly cross-linked PSoyOx core.

Journal Article↗

PubMed2005

Star-block copolymers as templates for the preparation of stable gold nanoparticles.

Gold nanoparticles of improved stability against aggregation were prepared using poly(ethylene oxide)-block-poly(epsilon-caprolactone) (PEO-b-PCL) star-block copolymers. A five-arm star-shaped macroinitiator (PEO) was utilized for the automated parallel controlled ring-opening polymerization of epsilon-caprolactone to prepare a series of PEO-b-PCL star-block copolymers with a constant PEO core linked to PCL blocks of variable length. The PEO core was swelled with KAuCl4 in N,N-dimethylformamide (DMF), and gold nanoparticles were subsequently obtained by reduction with NaBH4. Since the process was always templated by the same PEO core for all investigated polymers, the average dimension of the formed gold nanoparticles was in the same range for all star-block copolymers. In sharp contrast, the size distribution and long-term stability against aggregation of the gold nanoparticles dispersed in DMF were strongly dependent on the PCL block length, confirming the role of PCL blocks as stabilizing blocks for these nanoparticles.

Journal Article↗

PubMed2005

Dilution-induced spheres-to-vesicles morphological transition in micelles from block copolymer/surfactant complexes.

Metastable spherical micelles have been obtained by mixing in chloroform poly(styrene)-block-poly(4-vinylpyridine) diblock copolymers with perfluorinated surfactants bearing a carboxylic acid head. Dilution of these initial micelles triggers a morphological reorganization resulting in the formation of more stable vesicles. This transition can be advantageously used to encapsulate molecules of interest.

Chloroform↗

PubMed2005

Nanoscale control of polymer crystallization by nanoimprint lithography.

Polymer crystallization is notoriously difficult to control. Here, we demonstrate that the orientation of polymer crystals can be fully controlled at the nanoscale by using nanoimprint lithography (NIL) with molds bearing nanotrenches to shape thin films of poly(vinylidene fluoride). This unprecedented control is due to the thermomechanical history experienced by the polymer during embossing, to the shift of the nucleation mechanism from heterogeneous to homogeneous in confined regions of the mold, and to the constraining of the fast growth axis along the direction of the trenches. NIL thus appears as an ideal tool to realize smart polymer surfaces where crystal ordering can be tuned locally.

Journal Article↗

PubMed2004

Combinatorial synthesis of star-shaped block copolymers: host-guest chemistry of unimolecular reversed micelles.

The combination of combinatorial techniques for the synthesis as well as for the screening of novel star-shaped block copolymers consisting of a poly(ethylene glycol) core and a poly(caprolactone) shell leads to a fast evaluation of interesting properties of these materials. The polymers could be synthesized in a fully automated parallel fashion, and the screening of their host-guest properties was accomplished by utilizing a UV/vis plate reader extraction assay. The investigated polymers revealed unimolecular micellar behavior, and their maximum loading capacity could be correlated to their chemical structure. This opens avenues to an improved understanding of the requirements for unimolecular micellar behavior. Furthermore, the accelerated findings clearly point out the advantages of applied combinatorial approaches.

Journal Article↗

PubMed2004

Cylindrical micelles from the aqueous self-assembly of an amphiphilic poly(ethylene oxide)-b-poly(ferrocenylsilane) (PEO-b-PFS) block copolymer with a metallo-supramolecular linker at the block junction.

A supramolecular AB diblock copolymer has been prepared by the sequential self-assembly of terpyridine end-functionalized polymer blocks by using Ru(III)/Ru(II) chemistry. By this synthetic strategy a hydrophobic poly(ferrocenylsilane) (PFS) was attached to a hydrophilic poly(ethylene oxide) (PEO) block to give an amphiphilic metallo-supramolecular diblock copolymer (PEO/PFS block ratio 6:1). This compound was used to form micelles in water that were characterized by a combination of dynamic and static light scattering, transmission electron microscopy, and atomic force microscopy. These complementary techniques showed that the copolymers investigated form rod-like micelles in water; the micelles have a constant diameter but are rather polydisperse in length, and light scattering measurements indicate that they are flexible. Crystallization of the PFS in these micelles was observed by differential scanning calorimetry, and is thought to be the key behind the formation of rod-like structures. The cylindrical micelles can be cleaved into smaller rods whenever the temperature of the solution is increased or they are exposed to ultrasound.

Journal Article↗

PubMed2003

Lubrication by charged polymers.

Long-ranged forces between surfaces in a liquid control effects from colloid stability to biolubrication, and can be modified either by steric factors due to flexible polymers, or by surface charge effects. In particular, neutral polymer 'brushes' may lead to a massive reduction in sliding friction between the surfaces to which they are attached, whereas hydrated ions can act as extremely efficient lubricants between sliding charged surfaces. Here we show that brushes of charged polymers (polyelectrolytes) attached to surfaces rubbing across an aqueous medium result in superior lubrication compared to other polymeric surfactants. Effective friction coefficients with polyelectrolyte brushes in water are lower than about 0.0006-0.001 even at low sliding velocities and at pressures of up to several atmospheres (typical of those in living systems). We attribute this to the exceptional resistance to mutual interpenetration displayed by the compressed, counterion-swollen brushes, together with the fluidity of the hydration layers surrounding the charged, rubbing polymer segments. Our findings may have implications for biolubrication effects, which are important in the design of lubricated surfaces in artificial implants, and in understanding frictional processes in biological systems.

Journal Article↗

PubMed2003

From supramolecular block copolymers to advanced nano-objects.

The formation of asymmetric bis-complexes, based on terpyridine ligands and ruthenium ions, is described as a powerful tool for the self-assembly of polymer blocks end-functionalized with terpyridine units. This is illustrated in this contribution for the synthesis of amphiphilic metallo-supramolecular block copolymers, which are further used to produce aqueous micelles. Finally, the reversibility of the supramolecular bond opens new avenues for the preparation and manipulation of these nano-objects.

Journal Article↗

PubMed2003

Reversible chemical patterning on stimuli-responsive polymer film: environment-responsive lithography.

We report on a novel type of chemical patterning based on thin stimuli-responsive polymer films. The basic concept is the permanent storage (writing) of a pattern, which is reversibly developed and erased upon exposure to appropriate environment, e.g., solvent, pH, and temperature. The smart surface is fabricated from the mixed brush of poly(2-vinylpyridine) and polyisoprene. The mixed brush demonstrates switching behavior upon exposure to different solvents. Cross-linking of polyisoprene via illumination through a photomask results in formation of patterns with suppressed switching. Due to the contrast in switching between illuminated and dark areas, exposure of the smart surface to different solvents causes either reversible formation or erasing of chemical contrast between the illuminated and dark areas. Thus, the pattern surface can very locally attract colloidal particles or can be wetted by water only upon exposure to the special solvent which introduces the contrast between the illuminated and dark areas. Appearance of the patterns indicates particular environment and can be used for local switching of adsorption.

Journal Article↗