Biomedical subjects

Jean-Louis Viovy

Publications and source records attributed to Jean-Louis Viovy.

At least 19 recordsLinked to original sources

PubMed2006

Automated microdroplet platform for sample manipulation and polymerase chain reaction.

We present a fully automated system performing continuous sampling, reagent mixing, and polymerase chain reaction (PCR) in microdroplets transported in immiscible oil. Sample preparation and analysis are totally automated, using an original injection method from a modified 96-well plate layered with three superimposed liquid layers and in-capillary laser-induced fluorescence endpoint detection. The process is continuous, allowing sample droplets to be carried uninterruptedly into the reaction zone while new drops are aspirated from the sample plate. Reproducible amplification, negligible cross-contamination, and detection of low sample concentrations were demonstrated on numerous consecutive sample drops. The system, which opens the route to strong reagents and labor savings in high-throughput applications, was validated on the clinically relevant quantification of progesterone receptor gene expression in human breast cancer cell lines.

Automation↗

PubMed2006

Mechanism of RecA-mediated homologous recombination revisited by single molecule nanomanipulation.

The mechanisms of RecA-mediated three-strand homologous recombination are investigated at the single-molecule level, using magnetic tweezers. Probing the mechanical response of DNA molecules and nucleoprotein filaments in tension and in torsion allows a monitoring of the progression of the exchange in real time, both from the point of view of the RecA-bound single-stranded DNA and from that of the naked double-stranded DNA (dsDNA). We show that strand exchange is able to generate torsion even along a molecule with freely rotating ends. RecA readily depolymerizes during the reaction, a process presenting numerous advantages for the cell's 'protein economy' and for the management of topological constraints. Invasion of an untwisted dsDNA by a nucleoprotein filament leads to an exchanged duplex that remains topologically linked to the exchanged single strand, suggesting multiple initiations of strand exchange on the same molecule. Overall, our results seem to support several important assumptions of the monomer redistribution model.

Biophysical Phenomena↗

PubMed2006

Structural plasticity of single chromatin fibers revealed by torsional manipulation.

Magnetic tweezers were used to study the mechanical response under torsion of single nucleosome arrays reconstituted on tandem repeats of 5S positioning sequences. Regular arrays are extremely resilient and can reversibly accommodate a large amount of supercoiling without much change in length. This behavior is quantitatively described by a molecular model of the chromatin three-dimensional architecture. In this model, we assume the existence of a dynamic equilibrium between three conformations of the nucleosome, corresponding to different crossing statuses of the entry/exit DNAs (positive, null or negative, respectively). Torsional strain displaces that equilibrium, leading to an extensive reorganization of the fiber's architecture. The model explains a number of long-standing topological questions regarding DNA in chromatin and may provide the basis to better understand the dynamic binding of chromatin-associated proteins.Note: In the supplementary information initially published online to accompany this article, Supplementary Figure 2 was mistakenly replaced by Supplementary Equation 2. The error has been corrected online.

Biomimetic Materials↗

PubMed2006

Functionalized magnetic micro- and nanoparticles: optimization and application to micro-chip tryptic digestion.

The preparation of an easily replaceable protease microreactor for micro-chip application is described. Magnetic particles coated with poly(N-isopropylacrylamide), polystyrene, poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate), poly(glycidyl methacrylate), [(2-amino-ethyl)hydroxymethylen]biphosphonic acid, or alginic acid with immobilized trypsin were utilized for heterogeneous digestion. The properties were optimized, with the constraint of allowing immobilization in a microchannel by a magnetic field gradient. To obtain the highest digestion efficiency, sub-micrometer spheres were organized by an inhomogeneous external magnetic field perpendicularly to the direction of the channel. Kinetic parameters of the enzyme reactor immobilized in micro-chip capillary (micro-chip immobilized magnetic enzyme reactor (IMER)) were determined. The capability of the proteolytic reactor was demonstrated by five model (glyco)proteins ranging in molecular mass from 4.3 to 150 kDa. Digestion efficiency of proteins in various conformations was investigated using SDS-PAGE, HPCE, RP-HPLC, and MS. The compatibility of the micro-chip IMER system with total and limited proteolysis of high-molecular-weight (glyco)proteins was confirmed. It opens the route to automated, high-throughput proteomic micro-chip devices.

Amyloid beta-Peptides↗

PubMed2006

Surface treatment and characterization: perspectives to electrophoresis and lab-on-chips.

The control and modification of surface state is a major challenge in bioanalytical sciences, and in particular in electrokinetic separation methods, due to the importance of electroosmosis. This topic has gained recently a renewed interest, associated with the development of "lab-on-chips" systems that extend the range of materials in which separation channels are fabricated. The surface science community has developed through the years a large toolbox of characterization tools and surface modification protocols, which is not yet fully exploited in the bioanalytical world. In this paper, we try and present an overview of these tools, in order to stimulate new ideas for improved and more controlled surface treatment strategies for separations in capillaries and microchannels. We briefly describe some physical and chemical aspects of electroosmosis (global and spatially resolved), streaming current, and streaming potential. We also review the main strategies for surface coating, and compare the advantages of physisorption, well-organized thin self-assembled monolayers, or conversely thick polymer "brushes". Examples of existing applications to electrophoresis in microchannel are also given.

Adsorption↗

PubMed2006

Poly(N,N-dimethylacrylamide)-grafted polyacrylamide: a self-coating copolymer for sieving separation of native proteins by CE.

The potential of a series of newly synthesized poly(N,N-dimethylacrylamide) (PDMA) grafted polyacrylamide (PAM) copolymers (P(AM-PDMA)) as a replaceable separation medium for protein analysis was studied. A comparative study with and without copolymers was performed; the separation efficiency, analysis reproducibility and protein recovery proved that the P(AM-PDMA) copolymers were efficient in suppressing the adsorption of basic proteins onto the silica capillary wall. Furthermore, the size-dependent retardation of native proteins in a representative P(AM-PDMA) copolymer was demonstrated by Ferguson analysis. The results showed that the P(AM-PDMA) copolymers combine the good coating property of PDMA and the sieving property of PAM and could be applied as a sieving matrix for the analysis of native proteins.

Acrylamides↗

PubMed2006

Improving sensitivity of electrophoretic heteroduplex analysis using nucleosides as additives: Application to the breast cancer predisposition gene BRCA2.

A new method for the detection of unknown mutations, enhanced mismatch mutation analysis (EMMA), is proposed. It is based on electrophoretic heteroduplex analysis (HDA). The resolution is considerably improved, thanks to the combination of high-resolution block-copolymer sieving matrix, and nucleosides as additives in the electrophoretic medium. The EMMA method is compared to denaturing HPLC (DHPLC) in a large-scale study of mutations in the breast cancer-associated gene BRCA2, involving 4655 DNA amplicons from 94 patients. The rate of false positives was 0.09%. The raw success rate, without optimization of the amplicons tiling, was 94%, a value much higher than that achieved earlier with HDA, and comparable with that obtained with DHPLC. An analysis of the missed mutations suggest that the success rate could be improved up to about 97%, simply by redesigning the amplicons, while retaining the speed, cost effectiveness, and simplicity of the method.

Acrylamides↗

PubMed2005

In-capillary non-covalent labeling of insulin and one gastrointestinal peptide for their analyses by capillary electrophoresis with laser-induced fluorescence detection.

The potential of the commercially available dye sypro orange for in-capillary derivatization was evaluated for the detection of insulin and one gastrointestinal peptide (Arg-Arg-gastrin) by capillary electrophoresis with laser induced fluorescence (CE-LIF). The fluorescent emission intensity (lambda(ex) = 488 nm, lambda(em) = 610 nm) of this probe is very low in aqueous medium, and increases strongly in less polar solvent, e.g. methanol. The hydrophobic character of the two analyzed peptides is too low to induce sufficient interaction with the fluorescent probe for good sensitivity when the latter is alone in the background electrolyte. Thus, the potential of several neutral, zwitterionic, cationic and anionic surfactants to favor probe/peptide interactions has been evaluated. It was demonstrated that a borate buffer (pH 8.5) containing tetradecyltrimethylammonium bromide (TTAB) in sub-micellar conditions can be considered as the most suitable buffer for insulin CE-LIF analysis. In addition, the method showed a good linearity between insulin concentration and the peak area of the labeled insulin, allowing quantitative measurements. The sensitivity achieved so far is comparable with that achieved with UV absorption detection, but even at this level it is interesting for microchip analysis, in which fluorescence detection is much more commonly available than UV absorption detection.

Electrophoresis, Capillary↗

PubMed2005

Compaction kinetics on single DNAs: purified nucleosome reconstitution systems versus crude extract.

Kinetics of compaction on single DNA molecules are studied by fluorescence videomicroscopy in the presence of 1), Xenopus egg extracts and 2), purified nucleosome reconstitution systems using a combination of histones with either the histone chaperone Nucleosome Assembly Protein (NAP-1) or negatively charged macromolecules such as polyglutamic acid and RNA. The comparison shows that the compaction rates can differ by a factor of up to 1000 for the same amount of histones, depending on the system used and on the presence of histone tails, which can be subjected to post-translational modifications. Reactions with purified reconstitution systems follow a slow and sequential mechanism, compatible with the deposition of one (H3-H4)(2) tetramer followed by two (H2A-H2B) dimers. Addition of the histone chaperone NAP-1 increases both the rate of the reaction and the packing ratio of the final product. These stimulatory effects cannot be obtained with polyglutamic acid or RNA, suggesting that yNAP-1 impact on the reaction cannot simply be explained in terms of charge screening. Faster compaction kinetics and higher packing ratios are reproducibly reached with extracts, indicating a role of additional components present in this system. Data are discussed and models proposed to account for the kinetics obtained in our single-molecule assay.

Animals↗

PubMed2005

Use of self assembled magnetic beads for on-chip protein digestion.

The use of grafted trypsin magnetic beads in a microchip for performing protein digestion is described. The PDMS device uses strong magnets to create a magnetic field parallel to the flow with a strong gradient pointing through the center of the chip channel. This allows for the formation of a low-hydrodynamic resistance plug of magnetic trypsin beads that serves as a matrix for protein digestion. This device represents an inexpensive way of fabricating a multi open-tubular-like column with an appropriate pore size for proteins. Kinetics studies of the hydrolysis of a model peptide show a 100-fold increase in digestion speed obtained by the microsystem when compared to a batch wise system. This system also offers the great advantage of easy replacement, as the bead matrix is easily washed out and replaced. High performance and reproducibility for digesting recombinant human growth hormone are confirmed by analysing the digest products in both CE and MALDI-TOF MS. Similar sequence coverage (of about 44%) is obtained from MS analysis of products after 10 minutes on-chip and 4 h with soluble trypsin in bulk.

Dimethylpolysiloxanes↗

PubMed2005

Contamination-free continuous flow microfluidic polymerase chain reaction for quantitative and clinical applications.

We present a method for performing polymerase chain reaction (PCR) using isolated droplets flowing in an immiscible fluorinated solvent system. Thanks to an optimized control of interfacial properties, we could achieve in this capillary-based system reproducible amplification factors, without any detectable contamination between neighboring droplets. The system is readily amenable to further miniaturization and automation and serves as the first step toward a clinically viable, high-throughput, quantitative continuous flow PCR apparatus.

DNA↗

PubMed2005

Non-markovian transport of DNA in microfluidic post arrays.

We present an analytically solvable model for the transport of long DNA through microfluidic arrays of posts. The motion is a repetitive three-part cycle: (i) collision with the post and extension of the arms; (ii) rope-over-pulley post disengagement; and (iii) a random period of uniform translation before the next collision. This cycle, inspired by geometration, is a nonseparable (Scher-Lax) continuous-time random walk on a lattice defined by the posts. Upon adopting a simple model for the transition probability density on the lattice, we analytically compute the mean DNA velocity and dispersivity in the long-time limit without any adjustable parameters. The results compare favorably with the limited amount of experimental data on separations in self-assembled arrays of magnetic beads. The Scher-Lax formalism provides a template for incorporating more sophisticated microscale models.

Bacteriophage T4↗

PubMed2005

Self-assembled magnetic nanowires made irreversible by polymer bridging.

In this letter, we investigate the mechanism of formation of a recently discovered new type of colloid, irreversible flexible chains of magnetic particles. The chain formation mechanism is based on magnetically induced bridging by adsorbed polymers, and we investigate here the associated phase diagrams, considering both thermodynamic and kinetic aspects. This phase diagram is the consequence of a balance between entropic repulsion between polymer layers at the particles surfaces, depletion forces pushing the particles together, and a short-range attractive force developing when polymers can bridge two particles. We end up with a very simple protocol allowing the formation of long, extremely regular chains, which can find numerous applications in chemistry and biology. The perspectives for the development of a new field of "macrocolloidal chemistry" are discussed.

Adsorption↗

PubMed2005

Numerical investigation of sequence dependence in homologous recognition: evidence for homology traps.

During the initial phase of RecA-mediated recombination, known as the search for homology, a single-stranded DNA coated by RecA protein and a homologous double-stranded DNA have to perfectly align and pair. We designed a model for the homology search between short molecules, and performed Monte Carlo Metropolis computer simulations of the process. The central features of our model are 1), the assumption that duplex DNA longitudinal thermal fluctuations are instrumental in the binding; and 2), the explicit consideration of the nucleotide sequence. According to our results, recognition undergoes a first slow nucleation step over a few basepairs, followed by a quick extension of the pairing to adjacent bases. The formation of the three-stranded complex tends to be curbed by heterologies but also by another possible obstacle: the presence of partially homologous stretches, such as mono- or polynucleotide repeats. Actually, repeated sequences are observed to trap the molecules in unproductive configurations. We investigate the dependence of the phenomenon on various energy parameters. This mechanism of homology trapping could have a strong biological relevance in the light of the genomic instability experimentally known to be triggered by repeated sequences.

Algorithms↗

PubMed2005

Measurement of the surface concentration for bioassay kinetics in microchannels.

We present a simple and versatile method, based on fluorescence microscopy, to reliably measure the concentration of advected molecules in the vicinity of surfaces in microchannels. This tool is relevant to many microfluidic applications such as immunoassays and single-molecule experiments, where one probes the kinetics of a reaction between an immobilized target and a reactant carried by the bulk flow. The characterization of the surface concentration highlights the dominant role of transverse diffusion, which generates an apparent diffusivity at the surface 3-4 orders of magnitude greater than molecular diffusion alone, even close to the point of injection. We directly measure the effects of the longitudinal position along the channel and of the flow rate on the concentration front and develop a simple analytical model that compares well with the data. Finally, we propose a method to properly account for concentration fronts in single-molecule measurements and use it to directly access the kinetics parameters of protamine-induced condensation of DNA.

Biological Assay↗

PubMed2005

Motion of single long DNA molecules through arrays of magnetic columns.

We present a videomicroscopy study of T4 DNA (169 kbp) in microfluidic arrays of posts formed by the self-assembly of magnetic beads. We observe DNA moving through an area of 10 000 microm(2), typically containing 100-600 posts. We determine the distribution of the contact times with the posts and the distribution of passage times across the field of view for hundreds of DNA per experiment. The contact time is well approximated by a Poisson process, scaling like the inverse of the field strength, independent of the density of the array. The distribution of passage times allows us to estimate the mean velocity and dispersivity of the DNA during its motion over distances long compared to our field of view. We compare these values with those computed from a lattice Monte Carlo model and geometration theory. We find reasonable quantitative agreement between the lattice Monte Carlo model and experiment, with the error increasing with increasing post density. The deviation between theory and experiment is attributed to the high mobility of DNA after disengaging from the posts, which leads to a difference between the contact time and the total time lost by colliding. Classical geometration theory furnishes surprisingly good agreement for the dispersivity, while geometration theory with a mean free path significantly overestimates the dispersivity.

Bacteriophage T4↗

PubMed2005

Droplet fusion by alternating current (AC) field electrocoalescence in microchannels.

We present a system for the electrocoalescence of microfluidic droplets immersed in an immiscible solvent, where the undeformed droplet diameters are comparable to the channel diameter. The electrodes are not in direct contact with the carrier liquid or the droplets, thereby minimizing the risk of cross-contamination between different coalescence events. Results are presented for the coalescence of buffered aqueous droplets in both quiescent and flowing fluorocarbon streams, and on-flight coalescence is demonstrated. The capillary-based system presented here is readily amenable to further miniaturization to any lab-on-a-chip application where the conductivity of the droplets is much greater than the conductivity of the stream containing them, and should aid in the further application of droplet microreactors to biological analyses.

Electricity↗

PubMed2005

Immunoaffinity reactors for prion protein qualitative analysis.

The cellular prion protein (PrPc) represents the substrate for generation of conformational aberrant PrP isoforms which occur in human and animal prion diseases. The published two-dimensional maps of human PrPc show a vast microheterogeneity of this glycoprotein. The main goal of this project was to develop a highly specific immunoaffinity reactor for qualitative analysis of PrP cellular isoforms isolated from brain homogenate, cerebrospinal fluid and other tissues. New techniques for affinity proteomics, carriers and immobilization chemistry were applied. The choice of matrix (chemical and magnetic properties, particle size and distribution, porosity) was the key factor that influenced the quality of the reactor and the nature of final applications. Mouse anti-prion IgGs directed to N-terminal and C-terminal epitopes (residues 23-40 and 147-165) were grafted in different manners to magnetic micro- and nanoparticles particularly developed for micro-CHIP application. High operational and storage stability of affinity reactors with minimized nonspecific absorption were achieved. The quality of the immunoreactors was confirmed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis followed by immunoblotting and by two-dimensional electrophoresis.

Animals↗