PubMed Health⌕ Search

Biomedical subjects

Jean-Paul Collin

Publications and source records attributed to Jean-Paul Collin.

17 recordsLinked to original sources

Dinuclear iridium(III) complexes consisting of back-to-back tpy-(ph)n-tpy bridging ligands (n = 0, 1, or 2) and terminal cyclometallating tridentate N-C-N ligands.

Three dinuclear iridium(III) complexes consisting of a conjugated bis-tpy type bridging ligand and cyclometallating capping tridentate ligands of the 1,3-di-2-pyridylbenzene family have been prepared (tpy, 2,2',6',2' '-terpyridine). The two tpy units of the bridge are connected via their back-positions (4') either directly or with a p-phenylene or p-biphenylene spacer. The synthesis relies on the reaction between the dinuclear [Ir(dpb)Cl2]2 complex (dpb-H =1,3-dipyridyl-4,6-dimethylbenzene) and the corresponding bis-tpy ligand. Electrochemical measurements afford metal-centered oxidation and ligand-centered reduction potentials; from the oxidation steps, no evidence is obtained for a strong coupling between the two iridium(III) subunits of the dinuclear species. For all complexes, ground-state absorption data in the 380 nm to visible region show a trend which is consistent with the presence of charge-transfer (CT) transitions involving different degrees of electronic delocalization at the bridging ligands. (dpb)Ir(tpy-tpy)Ir(dpb)4+ exhibits an appreciable luminescence at room temperature (phi = 3.0 x 10(-3); tau = 3.3 ns), whereas no emission from the other binuclear complexes is detected. All binuclear complexes luminesce at 77 K, and a metal-to-ligand CT nature for (dpb)Ir(tpy-tpy)Ir(dpb)4+ is suggested, whereas a ligand-centered (LC) emission is proposed for (dpb)Ir(tpy-(ph)2-tpy)Ir(dpb)4+ on the basis of the comparison with the phosphorescence properties of the free bridging ligand, tpy-(ph)2-tpy. Transient absorbance experiments at room temperature afford the absorption spectra and lifetimes of the non-emissive excited states. For (dpb)Ir(tpy-ph-tpy)Ir(dpb)4+ and (dpb)Ir(tpy-(ph)2-tpy)Ir(dpb)4+, the spectra exhibit a broad profile peaking around 780 nm, quite intense in the case of (dpb)Ir(tpy-(ph)2-tpy)Ir(dpb)4+, and lifetimes of 160 and 440 ps, respectively.

Journal Article↗

2D supramolecular assemblies of benzene-1,3,5-triyl-tribenzoic acid: temperature-induced phase transformations and hierarchical organization with macrocyclic molecules.

Two-dimensional supramolecular honeycomb networks with cavities of an internal diameter of 2.95 nm were formed by the self-assembly of 4,4',4' '-benzene-1,3,5-triyl-tribenzoic acid (BTA) on a Ag(111) surface at room temperature. Annealing to higher temperatures resulted in two sequential phase transformations into closer-packed supramolecular arrangements. The phase transformations are associated with stepwise deprotonation of the carboxylic acid groups. The voids of the honeycomb network of BTA have a suitable size for the construction of hierarchical structures with guest molecules. Single molecules of the macrocyclic compound mt-33 were successfully confined inside 2D nanocavities of the honeycomb networks and released when the phase was transformed to the close-packed structure.

Journal Article↗

A triad based on an iridium(III) bisterpyridine complex leading to a charge-separated state with a 120-micros lifetime at room temperature.

A triad D-Ir-A, where Ir is an Ir(III) bisterpyridine complex connected through an amidophenyl spacer to D, a triphenylamine electron donor, and to A, a naphthalene bisimide electron acceptor, has been synthesized and electrochemically investigated. The photoinduced processes in the triad, which is more than 4-nm long, have been characterized by steady-state and time-resolved optical spectroscopy by comparison with the model dyads D-Ir, Ir-A, and the reference monomers D, Ir, and A. A sequential electron transfer occurs upon excitation of the D and Ir units, leading to the charge-separated state D+-Ir- -A in 100 % yield and subsequently to D+-Ir-A- in about 10 % yield. The final charge-separated state has a lifetime at room temperature of 120 micros in air-free acetonitrile and of 100 micros in air-equilibrated solvent. Excitation of the A units does not yield intramolecular reactivity, but the resulting triplet-excited state localized on the acceptor, D-Ir-3A, displays intermolecular reactivity.

Journal Article↗

Synthesis and photochemistry of a two-position Ru(terpy)(phen)(L)2+ scorpionate complex.

A dissymmetric 1,10-phenanthroline chelate (N-phen-S) bearing two polyether chains terminated by two monodentate ligands of the benzonitrile (N) and dialkylesulfoxide (S) types was synthesized, characterized, and coordinated to ruthenium. The corresponding Ru(terpy)(N-phen-S)2+ complexes (terpy = 4'-(3,5-ditertiobutylphenyl)-2,2';6',2' '-terpyridine) were fully characterized as being two coordination isomers of the scorpionate type with one of the two tails occupying the sixth position on the coordination sphere. Photoexpulsion of the coordinated tail led to opening of the ruthena-macrocycle and subsequent rearrangement of the bidentate chelate. This rearrangement consisted of a 90 degrees rotation of the phenanthroline around the ruthenium atom. Selective irradiation of one isomer in a mixture of the two was undertaken using band-pass filters; this resulted in an enrichment of the nonirradiated isomer in the mixture. Thermal back-coordination of the tail was investigated in the dark. It took place quantitatively from the corresponding ruthenium chloride complex by trapping of the anion with silver salts.

Ligands↗

A fast-moving [2]rotaxane whose stoppers are remote from the copper complex core.

[reaction: see text] A new copper-complexed rotaxane is described. It consists of a two-coordination site ring threaded by a sterically non-hindering 2,2'-bipyridine derivative. An electrochemical signal (oxidation or reduction of the copper center, Cu(I) or Cu(II)) induces rearrangement of the system. By using long and flexible linkers between the stoppers and the central complex, ligand exchange is fast, which leads to short response times (on the millisecond time scale and even below).

Journal Article↗

Tunable charge delocalization in dinickel quinonoid complexes.

When a 2,5-diamino-1,4-benzoquinonediimine C6H2(=NR)2(NHR)2 (2) is used as a bridging ligand, new dinickel(II) complexes [(acac)Ni[mu-C6H2(=NPh)4]Ni(acac)] (3a: R=Ph) and [(acac)Ni[mu-C6H2(=NCH2tBu)4]Ni(acac)] (3b: R=CH2tBu) are obtained; upon one-electron oxidation of these complexes delocalized mixed-valence compounds are formed. An X-ray diffraction study on 3b reveals equalization of the bond lengths within each of the ligand 6 systems and a lack of conjugation between them. The oxidized state in 3b+ involves both the bridging quinonoid ligand and the metal centers, with a major contribution coming from the bridging ligand. Electrochemical and spectroscopic methods were used to study the influence of the N-substituents of the tetranitrogen donor ligands 2. In this combined experimental and theoretical (DFT) study, it is also shown that the electronic structure within the dinickel system can be altered by addition of a coordinating ligand such as pyridine. The latter favors the high-spin configuration with semi-occupied metal-centered orbitals, leading to a metal-metal interaction in the mixed-valence Ni(II)-Ni(III) 3b+ system.

Journal Article↗

Light-driven expulsion of the sterically hindering ligand L in tris-diimine ruthenium(II) complexes of the Ru(phen)2(L)2+ family: a pronounced ring effect.

Three new ruthenium(II) complexes have been prepared which contain two 1,10-phenanthroline units and a third sterically hindering chelate. In one case, the hindering ligand is a disubstituted 2,2'-bipyridine (bpy) attached to two very bulky manisyl groups. The two other systems are similar in terms of size of the hindering groups (anisyl substituents) located close to the central metal. The complexes investigated in the Present Report are aimed at providing building blocks of future light-driven molecular machines. The photochemical expulsion of the sterically hindering chelate has thus been studied by UV-vis spectroscopy and 1H NMR. Surprisingly, the manisyl-containing complex turned out to be photochemically inert, indicating that a too bulky group acts as a protecting function versus decomplexation rather than as a destabilizing group. For the two other systems, a pronounced ring effect was observed: whereas the acyclic systems undergo fast photochemical expulsion of the bipy-based ligand, in the cyclic complex, the bipy-incorporating ring is decoordinated about 5 times less efficiently than the acyclic ligand of the previous case. These observations on the strong dependence of the photochemical behavior of the ruthenium(II) complexes on their structural properties are corroborated by X-ray diffraction studies on the three compounds investigated.

Journal Article↗

Photochemical expulsion of the neutral monodentate ligand L in Ru(terpy*)(diimine)(L)2+: a dramatic effect of the steric properties of the spectator diimine ligand.

A series of photoreactive complexes of the type Ru(terpy*)(N-N)(L)(2+), where terpy* is 4'-(3,5-ditertiobutylphenyl)-2,2':6',2' '-terpyridine, N-N is the bidentate chelate phen or dmp (phen = 1,10-phenanthroline, dmp = 2,9-dimethyl-1,10-phenanthroline), and L is the monodentate ligand dms, MeBN, or MeOBN (dms = dimethyl sulfide, MeBN = 2,6-dimethyl benzonitrile, MeOBN = 2,6-dimethoxybenzonitrile), has been synthesized and fully characterized by proton NMR spectroscopy, electrospray mass spectrometry, and UV-vis spectroscopy. The X-ray structures of four complexes were also obtained. In neat pyridine, the quantum yields for the photosubsitution of L by pyridine were measured and showed dramatic variations depending on the steric interactions between the spectator bidentate ligand and the leaving monodentate ligand L. The use of dmp instead of phen multiplied the photosubstitution efficiency by a factor of 20-50, depending on L. This effect could be qualitatively correlated to the distortions observed in the X-ray structures of the corresponding complexes. The highly distorted structure of Ru(terpy)(dmp)(dms)(PF(6))(2) showed a very high photosubsitution quantum yield phi = 0.36 in neat pyridine. The high photoreactivity of some of the compounds makes them particularly promising as components of future light-driven molecular machines.

Journal Article↗

Dyads containing iridium(III) bis-terpyridine as photoactive center: synthesis and electron transfer study.

A series of Ir(III)-D dyads based on an iridium(III) bis-terpyridine complex as a photoactive center and tertiary amines as donor groups, as well as their individual components, have been designed to generate photoinduced charge separation. Depending on the donor group, a modular approach or a "chemistry-on-the-complex" approach has been used to prepare three different Ir(III)-D dyads. A detailed photophysical study has been performed on one Ir(III)-D dyad in which a triarylamine is linked to the iridium bis-terpyridine complex with an amido-phenyl group used as a spacer. In acetonitrile at room temperature, steady-state and time-resolved methods gave evidence of a photoinduced charge-separated state Ir(-)-D(+) with a lifetime of 70 ps. This relatively short lifetime could be due to the close proximity between the negative charge, likely localized in the bridging terpyridine, and the oxidized donor group.

Journal Article↗

From ruthenium(II) to iridium(III): 15 years of triads based on bis-terpyridine complexes.

In order to mimic the photosynthetic reaction centre and better understand photoinduced electron transfer processes, a family of compounds has been studied for the past 15 years. These are transition metal complexes, M(tpy)(2) where tpy is a 2,2':6',2" terpyridine based ligand, bearing on one side a donor group and on the other side an acceptor group. The resulting triad molecules or their two-component reference compounds (donor-M(tpy)(2) and M(tpy)(2-acceptor) can contain Ru, Os, Rh or Ir as the metal centre and both visible-light non absorbing groups and porphyrins as donor and acceptor groups. This tutorial review will briefly present the different systems studied and the reasons that led to the preparation of new systems with improved performances.

Biomimetic Materials↗

Templated synthesis of a rotaxane with a [Ru(diimine)3]2+ core.

A rotaxane containing a ruthenium bisphenanthroline complex, acting as an axis, and a macrocycle incorporating a 2,2'-bipyridine (bpy) unit, threaded by the axis, has been synthesized. The bisphenanthroline ligand is such that its ruthenium(II) complexes possess a clearly identified axis, making such compounds ideal components of rotaxanes constructed around an octahedral ruthenium(II) center, which serves as a template. The ring is threaded by the axial ruthenium(II) precursor complex, to afford the corresponding pseudorotaxane in moderate yield. The X-ray structure analysis of this compound reveals the threaded nature of the complex. The length of the threaded ring (35 atoms in the periphery) is too short to allow easy threading of the axis through the macrocycle. As a consequence, an isomer is also obtained for which the axial ruthenium complex is attached in an exo fashion. (1)H NMR studies have been carried out, which reveal various conformational equilibria for the pseudorotaxane. Light-induced decoordination of the bpy-containing cyclic fragment was shown to be quantitative and to lead to the free ring and the axial ruthenium(II) complex, regardless of the starting compound (pseudorotaxane or exo isomer). Finally, the real rotaxane could be prepared, although it could not be separated from its exo isomer.

Journal Article↗

Photochemical or thermal chelate exchange in the ruthenium coordination sphere of complexes of the Ru(phen)(2)L family (L = diimine or dinitrile ligands).

Complexes of the type Ru(phen)(2)L(2+), where L is a substituted bipyridine family member, have been prepared, and their photochemical substitution reactions have been investigated. In the presence of a bis-benzonitrile derivative, acting as a bidentate chelate, photoexpulsion of L is performed under the action of visible light, with quantitative formation of new complexes of the type Ru(phen)(2)L'(2+) (L' = bis-nitrile ligand). Several complexes have been characterized by X-ray crystallography. In particular, the bis-benzonitrile complexes could be crystallized, and the structure of these compounds, containing a 13-, 14-, or 15-membered metal incorporating ring, was obtained. By heating Ru(phen)(2)L'(2+) with a bipy derivative in refluxing ethylene glycol, quantitative formation of the starting complex [Ru(phen)(2)L(2+)] was carried out. The present series of compounds presents properties that could be profitably used in the design and construction of multicomponent systems acting as photochemically driven molecular machines.

Journal Article↗

Design of Long-Lived Ru(II) Terpyridine MLCT States. Tricyano Terpyridine Complexes.

The photophysics of Ru(tpy)(CN)(3)(-) and Ru(ttpy)(CN)(3)(-) (where tpy = 2,2':6',2"-terpyridine and ttpy = 4'-(p-tolyl)-2,2':6,2"-terpyridine) has been studied in detail. The complexes exhibit strongly solvatochromic behavior. Emission energies correlate linearly with solvent acceptor number, consistent with the metal-to-ligand charge transfer (MLCT) nature of the emission and the occurrence of second-sphere donor-acceptor interactions at the cyanide ligands. On the other hand, the correlation of emission lifetimes is clearly biphasic, with a sharp maximum found for solvents of intermediate acceptor number. Such a behavior is explained in terms of competition between a direct deactivation channel and an indirect, thermally activated decay pathway, with relative efficiencies depending strongly on MLCT state energy. A gain of 2 orders of magnitude in lifetime is obtained using the tricyano complexes (Ru(tpy)(CN)(3)(-), tau = 48 ns in DMSO; Ru(ttpy)(CN)(3)(-), tau = 40 ns in CH(3)CN) instead of the corresponding bis-terpyridine species (Ru(tpy)(2)(2+), tau = 250 ps in CH(3)CN; Ru(ttpy)(2)(2+), tau = 860 ps in CH(3)CN). This shows how an appropriate choice of ancillary ligands can be used to improve the properties of photosensitizers containing the Ru(II)-terpyridine chromophoric unit.

Journal Article↗

Photoinduced Electron and Energy Transfer in Rigidly Bridged Ru(II)-Rh(III) Binuclear Complexes.

A series of binuclear Ru(II)-Rh(III) complexes of general formula (ttpy)Ru-tpy-(ph)(n)-tpy-Rh(ttpy)(5+) (n = 0-2) have been synthesized, where ttpy = 4'-p-tolyl-2,2':6,2"-terpyridine and tpy-(ph)(n)-tpy represents a bridging ligand where two 2,2':6',2"-terpyridine units are either directly linked together (n = 0) or connected through one (n = 1) or two (n = 2) phenyl spacers in the 4'-position. This series of complexes is characterized by (i) rigid bridge structures and (ii) variable metal-metal distances (11 Å for n = 0, 15.5 Å for n = 1, 20 Å for n = 2). The photophysics of these binuclear complexes has been investigated in 4:1 methanol/ethanol at 77 K (rigid glass) and 150 K (fluid solution) and compared with that of mononuclear [Ru(ttpy)(2)(2+) and Rh(ttpy)(2)(3+)] or binuclear [(ttpy)Ru-tpy-tpy-Ru(ttpy)(4+)] model compounds. At 77 K, no quenching of the Ru(II)-based excited state is observed, whereas energy transfer from excited Rh(III) to Ru(II) is observed for all complexes. At 150 K, energy transfer from excited Rh(III) to Ru(II) is again observed for all complexes, while quenching of excited Ru(II) by electron transfer to Rh(III) is observed, but only in the complex with n = 0. The reasons for the observed behavior can be qualitatively understood in terms of standard electron and energy transfer theory. The different behavior between n = 0 and n = 1, 2 can be rationalized in terms of better electronic factors and smaller reorganizational energies for the former species. The freezing of electron transfer quenching but not of energy transfer, in rigid glasses reflects the different reorganizational energies involved in the two processes. Unusual results arising from multiphotonic and conformational effects have also been observed with these systems.

Journal Article↗

Energy Transfer in Rigid Ru(II)/Os(II) Dinuclear Complexes with Biscyclometalating Bridging Ligands Containing a Variable Number of Phenylene Units.

We have prepared rodlike cyclometalated Ru(II)/Os(II) dinuclear complexes, (ttp)Ru(dpb-(ph)(n)()-dpb)Os(ttp)(2+), where the biscyclometalating bridging ligands contain dipyridylbenzene fragments, dbp, separated by a variable number, n, of phenylene spacers, and the terminal ligand is a terpyridine derivative [dpbH is di-2-pyridyl-1,3-benzene, ttp is 4'-p-tolyl-2,2':6',2"-terpyridine, and n = 0-2]. The rigid bridging ligands keep the metal centers at a distance r(MM) = 11, 15.5, and 20 Å, depending on n. Photoinduced energy transfer has been investigated by luminescence spectroscopy in nitrile solvents at room temperature and at 77 K (i.e., in frozen medium). According to a classical description of the process, the energy transfer occurs in a nearly activationless regime, is governed by electronic factors, and can be described in terms of the Dexter-type mechanism. The obtained energy transfer rates roughly span 3 orders of magnitude and indicate (i) that the temperature (i.e., the state of the solvent) has a small influence on the process and (ii) that the interposed phenylene spacers are weak attenuators of intercenter electronic coupling, H [H = H(0) exp(-betar(MM)), with beta approximately 0.33 Å(-)(1)].

Journal Article↗