Biomedical subjects

Jiacong Shen

Publications and source records attributed to Jiacong Shen.

At least 19 recordsLinked to original sources

PubMed2004

Regular patterns generated by self-organization of ammonium-modified polymer nanospheres.

Macroscopic regular stripe-crack patterns have been observed in the course of drying the aqueous suspensions of ammonium-modified polymer nanospheres. These forms emerged because the evaporation of dispersed water and self-assembly of nanospheres originates shrinkage during drying the aqueous suspensions. The drying condition plays an important role as well as the nature of the ammonium-modified polymer nanospheres for the stripe-crack pattern formation. By means of the vertical deposition method, directional stripe-crack patterns have been achieved in the macroscopic scale. Surprisingly, we have still noted an interesting secondary stripe pattern occurred spontaneously on the stripes.

Journal Article↗

PubMed2004

Surface tailoring of poly(DL-lactic acid) by ligand-tethered amphiphilic polymer for promoting chondrocyte attachment and growth.

The ligand-tethered poly(ethylene oxide-propylene oxide-ethylene oxide) (PEO-PPO-PEO) triblock copolymer was explored to engineer poly(DL-lactic acid) (PDL-LA) material to promote cell attachment and growth. The PEO-PPO-PEO was activated by methyl sulfonyl chloride and the amino acid, and peptide were attached. By blending the PDL-LA with the ligand-tethered PEO-PPO-PEO derivatives, the surface of modified PDL-LA film was investigated by ATR-FTIR, XPS and contact angle. The chondrocytes test on different PDL-LA films indicated that the PEO-PPO-PEO amino acid and RGD derivatives modified PDL-LA films could promote chondrocyte attachment and growth. This simple surface treatment method may have potentials for tissue engineering and other biomedical applications.

Adsorption↗

PubMed2004

Construction of multilayer coating onto poly-(DL-lactide) to promote cytocompatibility.

Thin polymer films were formed on poly-(DL-lactide) (PDL-LA) using polyelectrolyte multilayer technique to promote the chondrocyte cytocompatibility. PDL-LA substrates were activated by poly-(ethylenimine) to obtain stable positively charged surface. The polyelectrolytes such as alginate and poly-(L-lysine) were alternatively deposited onto the activated PDL-LA substrates. The multilayer-modified PDL-LA films were investigated by X-ray photoelectron spectroscopy, attenuated total reflection FTIR, contact angle and atomic force microscopy. The in vitro chondrocyte test indicated that the multilayer-modified PDL-LA substrates promoted chondrocyte attachment and growth. In comparison to conventional coating methods, polyelectrolyte multilayers are easy to prepare and the procedure is valid whatever the shape of the solid. It allows broad medical applications for drug delivery and tissue engineering.

Animals↗

PubMed2004

Endothelium regeneration on luminal surface of polyurethane vascular scaffold modified with diamine and covalently grafted with gelatin.

Using the recently developed surface modification technique, free amino groups have been introduced onto polyester-type polyurethane (PU) scaffolds. The introduction of these free amino groups increases the surface energy and provides a convenient way to further immobilize bioactive species such as gelatin, collagen or chitosan, etc. on the scaffold surface by employing glutaraldehyde as a coupling agent. These modifications are advantageous to enhance cell-material interaction. The culture of human umbilical vein endothelial cells (HUVECs) in vitro proved that the cell proliferation ratio of both the aminolyzed and the biomacromolecules-immobilized PU membranes was improved greatly comparing with the control PU. Scanning electron microscopy and confocal laser scanning microscopy observations displayed that the gelatin-immobilized PU vascular scaffold had formed a monolayer of endothelial intima on its luminal surface after HUVECs were cultured for 6 d. Therefore, the aminolysis and the following biomacromolecule immobilization is a promising way to enhance the cell-PU interaction that can accelerate the endothelium regeneration, which is crucial for blood vessel tissue engineering.

Biocompatible Materials↗

PubMed2004

Preparation and characterization of biodegradable chitosan/hydroxyapatite nanocomposite rods via in situ hybridization: a potential material as internal fixation of bone fracture.

A transparent and slight yellow chitosan (CS)/hydroxyapatite (HA) nanocomposite with high performed, potential application as internal fixation of bone fracture was prepared by a novel and simple in situ hybridization. The method solves the problem of the nano-sized particle aggregation in polymer matrix. XRD, TEM and SEM were used to determine component and morphology of the composite. Results indicated that nano-HA particles were dispersed well in CS matrix, which can also be proved by the transparent appearance of composite rod, and that the structure of composite is assembled by CS molecule in the order of layer-by-layer. The mechanical properties of the composite were evaluated by using bending strength and modulus, and compared with some other bone replacement materials such as PMMA and bone cement. The initial mechanical properties of bending strength and modulus of composite are 86 MPa and 3.4 GPa, respectively, which is double or triple times stronger than that of PMMA and bone cement. It was found that the bending strength and modulus of CS/HA with ratio of 100/5 (wt/wt) is slightly higher than that of pure CS rod. The addition of HA can also reduce the ratio of water absorption of composite, which postponed the retention of mechanical properties of CS/HA composite under moisture condition. The phenomenon can be predicted with the fit exponential function according the data measured.

Absorbable Implants↗

PubMed2003

Engineering porous polyurethane scaffolds by photografting polymerization of methacrylic acid for improved endothelial cell compatibility.

Using a preadsorbing-monomer method, polyurethane (PU) porous scaffolds were modified by grafting polymerization of methacrylic acid (MAA) initiated under UV light. Fourier transform infrared-attenuated total reflection spectroscopy and X-ray photoelectron spectroscopy characterizations confirmed the occurrence of the grafting polymerization of poly(methacrylic acid) (PMAA) on PU scaffolds and the measurement of water adsorption also demonstrated enhanced hydrophilicity. The PMAA grafting degree correlated to the amount of MAA adsorbed, the pore average diameter, and the porosity. It was verified that the higher porosity the scaffold has, the larger porous area (or the larger contact area with MAA) it has, and therefore the higher amount of MAA adsorbed and higher grafting degree obtained. The results of human endothelial cells cultured in vitro showed that the PU scaffolds modified with the hydrophilic PMAA had more improved cell compatibility than the control matrix.

Cell Adhesion↗

PubMed2003

Paraffin spheres as porogen to fabricate poly(L-lactic acid) scaffolds with improved cytocompatibility for cartilage tissue engineering.

Three-dimensional poly(L-lactic acid) (PLLA) scaffolds with high porosity and pore size ranging from 150 to 700 microm were conveniently prepared with paraffin spheres used as porogen. PLLA/1,4-dioxane solution containing a given amount of paraffin spheres was frozen at -25 degrees C to obtain a solidified mixture, followed with freeze drying and subsequent leaching with hexane to remove the 1,4-dioxane and paraffin spheres, respectively. The fabricated PLLA scaffolds were highly porous with evenly distributed and interconnected pores. The microstructures of the PLLA scaffolds as a function of paraffin-sphere size, paraffin-sphere dosage, and PLLA concentration were characterized by confocal laser scanning microscopy (CLSM) and scanning-electronic microscopy (SEM). To improve the cytocompatibility of the bioinert material, a hybrid PLLA scaffold containing Type I collagen was prepared by pressing the collagen solution into the scaffold under reduced pressure. The amounts of the collagen introduced in the scaffolds were detected by ninhydrin method. The distribution of the collagen in the scaffolds was studied with CLSM. Finally, in vitro cell culture was performed by injecting a chondrocyte suspension into the scaffolds. The results showed that the chondrocytes were more evenly distributed and more spread out in the collagen-modified PLLA scaffolds than in the unmodified ones.

Animals↗

PubMed2003

Synthesis, characteristics and luminescence properties of oligo(phenylenevinylene) dimers with a biphenyl linkage center.

Building a new structual oligo(phenylenevinylene) by linking trimeric phenylenvinylene (TPV) through the phenylphenyl bond of a central phenylene ring was reported. The resultant TPV dimers exhibit weak intermolecular interactions and intense blue photoluminescence in the solid state as well as high phase transition temperatures up to 250 degrees C. Organic light-emitting devices (OLEDs) based on these materials display blue emission with low turn-on voltage (about 3 V), maximum luminance approaching 2000 cd m(-2) and efficiency up to 1.6 cd A(-1).

Journal Article↗

PubMed2003

Silica nanobottles templated from functional polymer spheres.

Nanosized hollow silica spheres with holes in the wall (denoted as silica nanobottles) have been successfully prepared by assembly of functional polymer nanospheres with tetraethoxysilane (TEOS) through hydrothermal methods, coupled with removal of the core by programmed calcination. The functional polymer nanospheres were obtained by emulsifier-free emulsion copolymerization of styrene and (ar-vinylbenzyl) trimethylammoium chloride. The silica nanobottle sample was characterized by thermogravimetric analysis (TG), differential thermal analysis (DTA), transmission electron microscopy (TEM), and nitrogen adsorption techniques. The above characterizations confirm that the silica nanobottles have holes of about 8 nm in the wall and this unique structural feature might be useful for their encapsulation. Furthermore, characterization by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), and UV-visible absorption (UV-vis) showed that the luminescent material Eu(TTA)(3)(TPPO)(2) could be effectively encapsulated in silica nanobottles. This reveals that silica nanobottles have potential applications for nanotechniques.

Journal Article↗

PubMed2003

Protection of epidermal cells against UVB injury by the antioxidant selenium-containing single-chain Fv catalytic antibody.

The antioxidant effect of selenium-containing single-chain Fv catalytic antibody (Se-scFv2F3), a new mimic of glutathione peroxidase, was confirmed using a model system in which cultured rat skin epidermal cells were injured by ultraviolet B (UVB). The cell damage was characterized in terms of lipid peroxidation of the cells, cell viability, and cell membrane integrity. The injury effects of UVB and protection effects of Se-scFv2F3 on the cells were studied using the model system. UVB can damage the cells severely. Upon precultivation of the cells with 0.4U/ml Se-scFv2F3, however, the damage was significantly reduced as shown by the increase in cell viability, the decrease in the malondialdehyde and hydrogen peroxide levels, and the normalization of lactate dehydrogenase activity. In addition, a novel finding that Se-scFv2F3 can stimulate cultured epidermal cells to proliferate under certain conditions was observed.

Animals↗

PubMed2003

Chondrocyte behaviors on poly-L-lactic acid (PLLA) membranes containing hydroxyl, amide or carboxyl groups.

Hydrophilic groups, i.e. hydroxyl (-OH), carboxyl (-COOH) or amide (-CONH(2)) were introduced onto the poly-L-lactic acid (PLLA) membrane surfaces via the photo-induced grafting copolymerization of the corresponding monomers, i.e. hydroxyethyl methacrylate, methacrylic acid or acrylamide, respectively. Chondrocyte culture was used to study the correlation between the cell behaviors and the hydrophilic functional groups. The results showed that the cytocompatibility of the PLLA membranes with hydroxyl or amide groups on the surface was greatly improved compared to that of the original PLLA membrane. However, the PLLA membrane with carboxyl groups on the surface had even worse cytocompatibility though possessed a similar hydrophilicity.

Animals↗

PubMed2003

Constructing thromboresistant surface on biomedical stainless steel via layer-by-layer deposition anticoagulant.

Multilayer films consisting of polyethylenimine (PEI) and heparin were successfully prepared on biomedical 316L stainless steel surface via electrostatic self-assembly (ESA) of the PEI and heparin. The process of ESA of PEI/heparin was monitored by static contact angle, electrochemical impedance spectroscopy (EIS), reflection adsorption spectroscopy and X-ray photoelectron spectroscopy data. The contact angle and EIS data revealed that the multilayer coating was stable in Tris-HCl (pH 7.35) buffer solution for 21 days. The static platelet adhesion and static clotting time experiments indicated that the PEI/heparin-deposited stainless steel could resist the platelet adhesion and prolong the static clotting time effectively. Such an easy processing and shape-independent method may have good potential for surface modification of cardiovascular devices.

Anticoagulants↗

PubMed2003

Collagen/chitosan porous scaffolds with improved biostability for skin tissue engineering.

Porous scaffolds for skin tissue engineering were fabricated by freeze-drying the mixture of collagen and chitosan solutions. Glutaraldehyde (GA) was used to treat the scaffolds to improve their biostability. Confocal laser scanning microscopy observation confirmed the even distribution of these two constituent materials in the scaffold. The GA concentrations have a slight effect on the cross-section morphology and the swelling ratios of the cross-linked scaffolds. The collagenase digestion test proved that the presence of chitosan can obviously improve the biostability of the collagen/chitosan scaffold under the GA treatment, where chitosan might function as a cross-linking bridge. A detail investigation found that a steady increase of the biostability of the collagen/chitosan scaffold was achieved when GA concentration was lower than 0.1%, then was less influenced at a still higher GA concentration up to 0.25%. In vitro culture of human dermal fibroblasts proved that the GA-treated scaffold could retain the original good cytocompatibility of collagen to effectively accelerate cell infiltration and proliferation. In vivo animal tests further revealed that the scaffold could sufficiently support and accelerate the fibroblasts infiltration from the surrounding tissue. Immunohistochemistry analysis of the scaffold embedded for 28 days indicated that the biodegradation of the 0.25% GA-treated scaffold is a long-term process. All these results suggest that collagen/chitosan scaffold cross-linked by GA is a potential candidate for dermal equivalent with enhanced biostability and good biocompatibility.

Animals↗

PubMed2003

UV-B induced keratinocyte apoptosis is blocked by 2-selenium-bridged beta-cyclodextrin, a GPX mimic.

Cell proliferation and cell death of keratinocytes are tightly regulated to ensure epidermal homeostasis. UV-B induces keratinocyte apoptosis. UV-B also induces lipid peroxidation of keratinocytes to increase their amount of malondialdehyde (MDA). These phenomena can be explained by the production of reactive oxygen species (ROS) induced by UV-B radiation. We synthesized 2-selenium-bridged beta-cyclodextrin (2-SeCD) to imitate glutathione peroxidase (GPX), an important antioxidant and established a damage system, in which keratinocytes can be damaged by Ultraviolet B (UV-B) radiation. Using this damage system we studied 2-SeCD protection of keratinocytes against injury induced by UV-B. Experimental results showed that 2-SeCD could protect keratinocytes from apoptosis. Moreover, 2-SeCD inhibits lipid peroxidation of keratinocytes and scavenges ROS. 2-SeCD inhibits the UV-B induced apoptotic signal transduction. This antiapoptotic mechanism may be partly related to the elimination of hydrogen peroxide.

Apoptosis↗

PubMed2003

A selenium-containing single-chain abzyme with potent antioxidant activity.

Reactive oxygen species (ROS) are products of normal metabolic activities and are thought to be the cause of many diseases. A selenium-containing single-chain abzyme 2F3 (Se-2F3-scFv) that imitates glutathione peroxidase has been produced which has the capacity to remove ROS. To evaluate the antioxidant ability of Se-2F3-scFv, we constructed a ferrous sulfate/ascorbate (Vc/Fe2+)-induced mitochondrial damage model system and investigated the capacity of Se-2F3-scFv to protect mitochondria from oxidative damage. Se-2F3-scFv markedly decreased mitochondrial swelling, inhibited lipid peroxidation, and maintained the activity of cytochrome c oxidase, in comparison with Ebselen, a well-studied glutathione peroxidase mimic, indicating that Se-2F3-scFv has potential for treating diseases mediated by ROS.

Animals↗

PubMed2003

Photografting of poly(hydroxylethyl acrylate) onto porous polyurethane scaffolds to improve their endothelial cell compatibility.

In order to improve the cytocompatibility of polyurethane (PU) porous scaffolds obtained by thermally-induced phase separation, poly(hydroxylethyl acrylate) (PHEA) was covalently immobilized by grafting copolymerization of HEA by photo-oxidation of the scaffolds and initiation of UV light. FT-IR-ATR spectroscopy and X-ray photoelectron spectroscopy (XPS) characterizations confirmed the occurrence of the grafting co-polymerization of HEA on the porous PU scaffolds. The measurement of water absorption demonstrated the improvement of the hydrophilicity after grafting with PHEA. The results obtained in a human umbilical vein endothelial cell (HUVEC) culture proved that the porous PU scaffold modified with the hydrophilic PHEA had better cytocompatibility than the control. The influence of surface pore size on the HUVEC growth behavior was assessed regarding cell anchorage, proliferation and viability, as well as morphology. An overall increase of cell number and viability with the decrease of the surface pore size was found.

Absorption↗

PubMed2003

Surface modification of poly-L-lactic acid (PLLA) membrane by grafting acrylamide: an effective way to improve cytocompatibility for chondrocytes.

Poly-L-lactic acid (PLLA) membranes were photo-oxidized in hydrogen peroxide solution under ultraviolet light (UV) to introduce hydroperoxide groups onto the PLLA membrane surfaces. The photo-oxidized membranes were then immersed in acrylamide (AAm) solution containing Fe2+ to graft polyacrylamide (PAAm) onto the PLLA membrane surfaces. The density of the hydroperoxide groups introduced on the PLLA membrane surfaces varied with the temperature and the photo-oxidization time. The occurrence of grafting was verified by X-ray photoelectron spectroscopy (XPS). The degree of grafting increased with the monomer concentration and the polymerization time. Water contact angle measurements showed that the wettability of the modified PLLA membranes had improved. Chondrocytes proliferated more rapidly and were more spread out on the modified membrane than on the control PLLA membrane, indicating that the PAAm-grafted PLLA membrane has better cytocompatibility for chondrocytes.

Acrylamide↗

PubMed2003

Thermal dehydration treatment and glutaraldehyde cross-linking to increase the biostability of collagen-chitosan porous scaffolds used as dermal equivalent.

A biodegradable scaffold for skin-tissue engineering was designed using collagen and chitosan, which are common materials for biomedical application. The scaffolds containing different amounts of chitosan were prepared by mixing the collagen and chitosan solutions followed by removal of the solvent using a freeze-drying method. The cross-linking treatment of these scaffolds was performed using the dehydrothermal treatment (DHT) method or glutaraldehyde (GA) to increase their biostability. The effect of the chitosan concentration and the cross-linking methods on the morphology of these scaffolds was studied by SEM. The water retention and the biodegradability in vitro of various collagen-chitosan scaffolds were investigated. Finally the biocompatibility of the collagen-chitosan (10 wt% chitosan) scaffold treated with different cross-linking methods was evaluated using a in vivo animal test. A mild inflammatory reaction could be detected in the early stages, and GA treatment can decrease the inflammatory reaction in a long-term implantation. After implantation for four weeks, all kinds of scaffolds, especially the GA-treated scaffolds (Col-GA) were filled with a large number of fibroblasts and were vascularized to a certain extent. These results suggest that the GA-treated scaffold has an increased biostability and excellent biocompatibility. It can be a potential candidate for skin-tissue engineering.

Administration, Cutaneous↗