Biomedical subjects

Jian-Hang Zhu

Publications and source records attributed to Jian-Hang Zhu.

4 recordsLinked to original sources

PubMed2005

Improving alachlor biodegradability by ferrate oxidation.

Alachlor can be recalcitrant when present at high concentrations in wastewater. Ferrate oxidation was used as a pretreatment to improve its biodegradability and was evaluated by monitoring alachlor elimination and removal of COD(Cr) (chemical oxygen demand determined by potassium dichromate) during the oxidation process up to a value compatible with biological treatment. Ferrate oxidation resulted in elimination of alachlor followed by degradation of its intermediates. High pH suppressed alachlor removal and COD(Cr) removal due to the low redox potential of ferrate ions. Although alachlor can be totally eliminated within 10 min under optimized conditions (alachlor, 40 mg l(-1); ferrate:alachlor molar ratio, 2; and pH 7.0), its complete mineralization cannot be achieved by ferrate oxidation alone. Alachlor solution treated by ferrate for 10 min inhibited an up-flow biotreatment with activated sludge. The biodegradability of ferrate-pretreated solution improved when the treatment was increased to 20 min, at the point of which BOD(5)/COD(Cr) ratio of the treated solution was increased to 0.87 from 0.35 after 10 min treatment. Under optimized conditions, ferrate oxidation for 20 min resulted in total elimination of alachlor, partial removal of COD(Cr) and the ferrate-treated solution could be effectively treated by the up-flow activated sludge process.

Acetamides↗

PubMed2005

Encapsulating live cells with water-soluble chitosan in physiological conditions.

A new class of microcapsules was prepared under physiological conditions by polyelectrolyte complexation between two oppositely-charged, water-soluble polymers. The microcapsules consisted of an inner core of half N-acetylated chitosan and an outer shell of methacrylic acid (MAA) (20.4%)-hydroxyethyl methacrylate (HEMA) (27.4%)-methyl methacrylate (MMA) (52.2%) (MAA-HEMA-MMA) terpolymer. Both 400 and 150 kDa half N-acetylated chitosans maintained good water solubility and supplied enough protonated amino groups to coacervate with terpolymer at pH 7.0-7.4, in contrast to other chitosan-based microcapsules which must be prepared at pH <6.5. The viscosity of half N-acetylated chitosan solutions between 80 and 3000 cPas allowed the formation of microcapsules with spherical shape. Molar mass, pH and concentration of half N-acetylated chitosan, and reaction time, influenced the morphology, thickness and porosity of the microcapsules. Microcapsules formed with high concentration of half N-acetylated chitosan exhibited improved mechanical stability, whereas microcapsules formed with low concentration of half N-acetylated chitosan exhibited good permeability. This 3D microenvironment has been configured to cultivate sensitive anchorage-dependent cells such as hepatocytes to maintain high level of functions.

Animals↗

PubMed2005

Characterization of amphoteric multilayered thin films by means of zeta potential measurements.

Multilayer films of amphoteric methylated collagen were assembled on SOURCE 15S or SOURCE 15Q beads by sequential electrostatic deposition with negatively charged methylacrylic acid-hydroxyethyl methacrylate-methyl methacrylate (MAA-HEMA-MMA) terpolymer. Methylated collagen and terpolymer were deposited under conditions where they were oppositely charged to one another, thereby facilitating growth of the films through electrostatic interactions. Measurements revealed alternating positive and negative zeta-potential with the deposition of each methylated collagen and terpolymer layer, respectively. Assembly pH had a remarkable influence on zeta-potential of the assembled multilayers and the deposition of methylated collagen will be frustrated when the assembly pH is up to 9.0. In addition, ionic strength (NaCl concentration) showed an intricate effect on zeta-potential of the films of amphoteric methylated collagen.

Collagen↗

PubMed2005

Optimization of 3-D hepatocyte culture by controlling the physical and chemical properties of the extra-cellular matrices.

Hepatocytes are anchorage-dependent cells sensitive to microenvironment; the control of the physicochemical properties of the extra-cellular matrices may be useful to the maintenance of hepatocyte functions in vitro for various applications. In a microcapsule-based 3-D hepatocyte culture microenvironment, we could control the physical properties of the collagen nano-fibres by fine-tuning the complex-coacervation reaction between methylated collagen and terpolymer of hydroxylethyl methacrylate-methyl methacrylate-methylacrylic acid. The physical properties of the nano-fibres were quantitatively characterized using back-scattering confocal microscopy to help optimize the physical support for hepatocyte functions. We further enhanced the chemical properties of the collagen nano-fibres by incorporating galactose onto collagen, which can specifically interact with the asialoglycoprotein receptor on hepatocytes. By correlating a range of collagen nano-fibres of different physicochemical properties with hepatocyte functions, we have identified a specific combination of methylated and galactosylated collagen nano-fibres optimal for maintaining hepatocyte functions in vitro. A model of how the physical and chemical supports interplay to maintain hepatocyte functions is discussed.

7-Alkoxycoumarin O-Dealkylase↗