Biomedical subjects

Jiang Ding

Publications and source records attributed to Jiang Ding.

5 recordsLinked to original sources

PubMed2005

Tailoring cardiac resynchronization therapy using interventricular asynchrony. Validation of a simple model.

This study explores the use of interventricular asynchrony (interVA) for optimizing cardiac resynchronization therapy (CRT), an idea emerging from a simple pathway model of conduction in the ventricles. Measurements were performed in six dogs with chronic left bundle branch block (LBBB) and in 29 patients of the Pacing Therapies for Congestive Heart Failure (PATH-CHF)-I study. In the dogs, intraventricular asynchrony (intraVA) was determined using left ventricular (LV) endocardial activation maps. In dogs and patients, the maximum rate of rise of LV pressure (LV dP/dt(max)) and the pulse pressure (PP) and interVA [time delay between upslope of LV and right ventricular (RV) pressure curves] were measured during LV, RV, and biventricular (BiV) pacing with various atrioventricular (AV) delays. Measurements in the canine hearts supported the pathway model in that optimal resynchronization occurred at approximately 50% reduction of intraVA and at an interVA value halfway that during LBBB and LV pacing. In patients with significant hemodynamic response during pacing (n = 22), intrinsic interVA and interVA at peak improvement (interVA(p)) varied widely between patients (from -83 to -15 ms and from -42 to +31 ms, respectively). However, the model predicted individual interVA(p) accurately (SD of +/-6 ms and +/-12 ms for LV dP/dt(max) and PP, respectively). At equal interVA, LV and BiV pacing produced equal hemodynamic response, but in 11 of 22 responders, BiV pacing reduced interVA insufficiently to reach the maximum hemodynamic response. LV pacing at short AV delay proved to result in better hemodynamics than predicted by the model, indicating that additional factors determine hemodynamics during LV preexcitation. Guided by a simple pathway model, interVA measurements accurately predict optimal hemodynamic performance in individual CRT patients.

Animals↗

PubMed2005

Comparison of stimulation sites within left ventricular veins on the acute hemodynamic effects of cardiac resynchronization therapy.

OBJECTIVES: The purpose of this study was to study the acute hemodynamic effect of left ventricular (LV) stimulation sites within a coronary vein. BACKGROUND: Access to LV stimulation sites for resynchronization therapy is achieved using specialized lead systems navigated through a coronary vein. The effects of stimulation in different coronary veins have been evaluated previously, but less is known about stimulation sites within a coronary vein. METHODS: Twenty-four patients (New York Heart Association functional class II-IV, age 59 +/- 10 years, ejection fraction 21 +/- 7%, QRS 166 +/- 30 ms) were enrolled in the study. A novel over-the-wire lead system was used to access an anterior or lateral coronary vein. At each lead location, a randomized stimulation protocol was executed. Hemodynamic responses were evaluated using LV dP/dtmax. RESULTS: The mean time to cannulate the coronary sinus and position the LV lead was 19 +/- 30 minutes and 17 +/- 18 minutes, respectively. Data from stimulation at two sites within a coronary vein were obtained in 19 patients (anterior vein 11; lateral vein 8). Of these patients, 14 (anterior vein 9; lateral vein 5) showed large improvement in dP/dtmax (22%-25% in anterior vein, 37%-40% in lateral vein). Overall, there were no group differences in hemodynamic effects among different stimulation sites within a coronary vein, although significant variability among sites was observed in individuals. CONCLUSIONS: Resynchronization therapy through a coronary vein improves acute hemodynamic function of heart failure patients with LV conduction disorder. There were no significant differences between basal and apical pacing sites for this group.

Aged↗

PubMed2003

Biventricular mechanical asynchrony predicts hemodynamic effect of uni- and biventricular pacing.

We tested whether biventricular resynchronization explains contractile function changes with univentricular and biventricular pacing in heart failure patients with varying magnitudes of baseline biventricular asynchrony. Thirty patients (New York Hospital Association class > or = III, QRS duration > or =120 ms) were tested. Contractile function was measured by left ventricular maximum first derivative of pressure over time (dP/dtmax). Biventricular mechanical asynchrony was quantified by the normalized pressure-pressure (NPP) loop area formed by the cross-plot of right and left intraventricular pressure curves from each cardiac cycle. Any ventricular pacing increased dP/dtmax if it decreased baseline NPP loop area and almost always worsened dP/dtmax and asynchrony when baseline NPP loop area <0.3. The quantitative relationship between dP/dtmax and NPP loop area change depended on ventricular pacing site and timing relative to intrinsic activation. For similar NPP loop decreases, dP/dtmax increased 16% more with left and biventricular pacing compared with right ventricular pacing. In conclusion, right, left, or biventricular pacing can improve contractile function only in patients having sufficient baseline biventricular asynchrony. However, biventricular resynchronization is only one of the improvement mechanisms.

Aged↗

PubMed2002

Cardiac resynchronization therapy restores optimal atrioventricular mechanical timing in heart failure patients with ventricular conduction delay.

We characterized the relationship between systolic ventricular function and left ventricular (LV) end-diastolic pressure (LVEDP) in patients with heart failure (HF) and baseline asynchrony during ventricular stimulation. The role of preload in the systolic performance improvement that can be obtained in HF patients with LV stimulation is uncertain.We measured the maximum rate of increase of LV pressure, LVEDP, aortic pulse pressure (PP) and the atrioventricular mechanical latency (AVL) between left atrial systole and LV pressure onset in 39 patients with HF. Two subgroups were identified: "responder" if PP improved, or "nonresponder."Maximum hemodynamic improvement occurred at an atrioventricular (AV) delay that did not decrease LVEDP. Left ventricular and biventricular (BV) stimulation increased systolic hemodynamics significantly, despite no significant increase in LVEDP. All parameters decreased when the LVEDP was decreased by shorter AV delay. Left ventricular and BV stimulation provided better hemodynamics than right ventricular (RV) stimulation. For the nonresponder subgroup, systolic hemodynamics only worsened during AV delay shortening. For the responder subgroup, optimum PP was achieved when AVL was near zero. Restoration of optimal left atrial-ventricular mechanical timing partly contributes to the hemodynamic improvements observed in this patient subgroup. However, preload alone cannot explain the differences seen between RV and BV stimulation and the contradictory PP decreases even at maximal preload in the nonresponder subgroup. These results may be explained by a site-dependent mechanism such as the degree of ventricular synchrony. Caution should be taken in these patients when optimizing AV delays using echocardiography techniques that focus on LV inflow.

Atrial Function, Left↗

PubMed2002

The role of surface functional groups in calcium phosphate nucleation on titanium foil: a self-assembled monolayer technique.

Surface functional groups play important roles in nucleating calcium phosphate deposition on surgical titanium implants. In this study, various functional groups were introduced onto the surface of commercially pure titanium foils using a self-assembled monolayer (SAM) technique. An organic silane, 7-oct-1-enyltrichlorosilane (OETS) was used and -OH, -PO4H2, -COOH groups were derived from its unsaturated double bond. Ti foils were first oxidized in concentrated H2SO4/H2O2. ESCA and contact angle measurements were used to characterize the SAM surfaces and confirm the presence of various functional groups. A fast calcium phosphate deposition experiment was carried out by mixing Ca2+- and (PO4)(3-)-containing solutions in the presence of the surface-modified Ti samples at pH 7.4 at room temperature in order to verify the nucleating abilities of these functional groups. SEM, Raman spectroscopy, XRD and ATR-FTIR results showed that poorly crystallized hydroxyapatite (HA) can be deposited on the SAM surfaces with -PO4H2 and -COOH functional groups, but not onto the SAM with -CH=CH2 and -OH. -PO4H2 exhibited a stronger nucleating ability than that of -COOH. The oxidized Ti sample also showed some calcium phosphate deposition but to a lesser extent as compared to SAM surfaces with -PO4H2 and -COOH. The pre-deposited HA can rapidly induce biomimetic apatite layer formation after immersion in 1.5 SBF for 18 h regardless of the amount of pre-deposited HA. The results suggested that the pre-deposition of HA onto these functionalized SAM surfaces might be an effective and fast way to prepare biomimetic apatite coatings on surgical implants.

Biocompatible Materials↗