PubMed Health⌕ Search

Biomedical subjects

Jianling Zhang

Publications and source records attributed to Jianling Zhang.

At least 19 recordsLinked to original sources
PubMed2006

Effect of compressed CO2 on the critical micelle concentration and aggregation number of AOT reverse micelles in isooctane.

The effect of compressed CO2 on the critical micelle concentration (cmc) and aggregation number of sodium bis-2-ethylhexylsulfosuccinate (AOT) reverse micelles in isooctane solution was studied by UV/Vis and fluorescence spectroscopy methods in the temperature range of 303.2-318.2 K and at different pressures or mole fractions of CO2 (X(CO2)). The capacity of the reverse micelles to solubilize water was also determined by direct observation. The standard Gibbs free energy (DeltaGo(m)), standard enthalpy (DeltaHo(m)), and standard entropy (DeltaSo(m)) for the formation of the reverse micelles were calculated by using the cmc data determined. It was discovered that the cmc versus X(CO2) curve and the DeltaGo(m) versus X(CO2) curve for a fixed temperature have a minimum, and the aggregation number and water-solubilization capacity of the reverse micelles reach a maximum at the X(CO2) value corresponding to that minimum. These results indicate that CO2 at a suitable concentration favors the formation of and can stabilize AOT reverse micelles. A detailed thermodynamic study showed that the driving force for the formation of the reverse micelles is entropy.

Journal Article↗
PubMed2006

Synthesis of cross-linked enzyme aggregates (CLEAs) in CO2-expanded micellar solutions.

A new method to prepare the cross-linked enzyme aggregates (CLEAs) was developed. Through cross-linking the enzyme (Trypsin) aggregates, which was precipitated from the CO2-expanded reverse micellar solutions, dendritic CLEAs were obtained. The sizes of the CLEAs prepared by this new method were nanometer order of magnitudes and could be tuned by changing the water-to-surfactant ratio (w0) and the concentration of enzyme in the reverse micellar solution. The diameter of CLEAs increased with increasing w0 value of reverse micelles and the concentration of Trypsin. The activity of CLEAs obtained by this method is improved in contrast to those obtained by the conventional method. This method has some advantages in applications and can be easily applied to the synthesis of other cross-linked enzyme aggregates.

Carbon Dioxide↗
PubMed2006

Enhanced solubilization of bovine serum albumin in reverse micelles by compressed CO2.

The effect of compressed CO2 on the solubilization of bovine serum albumin (BSA) in water/sodium bis-(2-ethylhexyl) sulfosuccinate (AOT)/isooctane reverse micelles was studied by observing phase behavior and recording UV-visible spectra under different conditions. The pH values within the water cores of reverse micelles at different CO2 pressures were also determined. The solubilization capacity of the reverse micelles for the protein increased considerably as CO2 pressure increased within the low-pressure range, but decreased at higher CO2 pressures, so that the micelles eventually lost their ability to solubilize the protein. The effect of CO2 on the stability of the reverse micelles played an important role in the relationship between pressure and protein solubility. A "multicomplex" model was proposed to explain these effects. The different solublization capacities within different pressure ranges demonstrates the unique advantage of using compressed CO2 in the extraction of proteins with reverse micelles.

Carbon Dioxide↗
PubMed2006

Controlled synthesis of Ag/TiO2 core-shell nanowires with smooth and bristled surfaces via a one-step solution route.

Ag/TiO2 core-shell nanowires were synthesized via a one-step solution method without using a template. Interestingly, the shell morphologies can be controlled to be smooth or bristled by altering the reaction temperature. Moreover, the TiO2 shell thickness and bristle length can be tuned by changing the AgNO3 concentration. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected-area electron diffraction (SAED), energy-dispersive X-ray analysis (EDS), X-ray powder diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used to characterize the resultant Ag/TiO2 core-shell nanowires. Moreover, the absorption peaks of our samples are significantly red-shifted compared with those of the uncoated pure silver nanowires, indicating that interaction between the core and shell occurred. On the basis of the experimental results, we proposed a template-induced Oswald ripening mechanism to explain the formation of the Ag/TiO2 core-shell nanowires.

Journal Article↗
PubMed2006

Efficacy of subcutaneous administration of gonadotropin-releasing hormone agonist on idiopathic central precocious puberty.

In order to assess the feasibility of subcutaneous administration of Triptorelin with 6-week intervals for the suppression of pituitary-gonadal axis and changes of clinical signs in girls with idiopathic central precocious puberty (ICPP), 46 girls with ICPP were treated with GnRHa. Triptorelin (Decapeptyl, 3.75 mg) was administered subcutaneously (SC) at 6-weeks intervals or intramuscularly (IM) at 4-weeks intervals randomly for more than 12 months consecutively. During GnRHa therapy, clinical parameters and laboratory data, including height, weight, pubertal stage, bone age, uterine volume and ovarian size, serum levels of luteinizing hormone (LH), follicle stimulating hormone (FSH) and estradiol (E2), were monitored and analyzed. It was found that both treatment regimes led to regression of precocious puberty and reversal of secondary sexual characteristics. Breast developments regressed. Uterine volume was decreased after treatment, but there was no statistically significant difference. Mean ovarian volume did not change significantly during treatment. The height velocity was decreased significantly from 6.3+/-1.4 cm/year to 5.8+/-1.2 cm/year in group SC and 6.7+/-1.3 cm/year to 5.4+/-1.0 cm/year in group IM, respectively. The rate of bone maturation was reduced significantly during treatment. The ratio of deltaBA/deltaCA was 1.2+/-0.2 or 1.3+/-0.3 at the onset of therapy and decreased significantly after the treatment to 0.7+/-0.2 or 0.9+/-0.1, respectively. The predicted adult height was increased significantly and progressively during therapy. The levels of serum LH, FSH and E2 returned to the prepubertal condition. No significant side effects of therapy were noted. The most common side effect during SC treatment was that a non-irritating, 1 cm in diameter mass was palpated at the site of subcutaneous injection in the abdominal wall of patients, which disappeared after 6-12 weeks. Two girls had minimal withdrawal vaginal bleeding episodes after the first injection. It was concluded that both IM and SC triptorelin administrations were clinically effective. They induce profound suppression of hypothalamic-pituitary-gonadal axis while stabilizing height velocity, slowing bone maturation and increasing predicted adult height. These results suggest that subcutaneous injection of triptorelin in 6-weeks intervals at a dosage of 3.75 mg be a safe and acceptable regimen for ICPP

Bone Development↗
PubMed2006

Microwave-assisted synthesis of pt nanocrystals and deposition on carbon nanotubes in ionic liquids.

In this work, a simple, fast and efficient route is presented for the metal (such as Pt, Rh, etc.) nanocrystal synthesis and deposition on carbon nanotubes (CNTs) in ionic liquids (ILs) via microwave heating. In this method, inorganic salts (such as H2PtCl6.4H2O, RhCl3.2H2O, etc.) dissolved in ILs, 1,1,3,3-tetramethylguanidinium trifluoroacetate or 1,1,3,3-tetramethylguanidinium lactate, were reduced to metal nanoparticles by glycol with the aid of microwave heating, and the produced metal nanoparticles could be decorated on CNTs in the presence of CNTs in ILs. The resulting nanomaterials were characterized by means of transmission electron microscopy and X-ray diffraction. It was demonstrated that the homogeneously dispersed Pt nanocrystals with the size of 2-3 nm were obtained using H2PtCl6.4H2O as precursor, and they deposited on CNTs with the similar size when CNTs was present in ILs. This technique also can be extended to fabricate other noble metal nanocrystals (including Rh, Au, etc.) and corresponding CNT composites.

Carbon↗
PubMed2005

Effect of compressed CO2 on the chloroperoxidase catalyzed halogenation of 1,3-dihydroxybenzene in reverse micelles.

The effect of compressed CO2 on the specific activity of chloroperoxidase (CPO) to catalyze the chlorination of 1,3-dihydroxybenzene in cetyltrimethylammonium chloride (CTAC)/H2O/octane/pentanol reverse micellar solution was studied. The results show that the specific activity of the enzyme can be enhanced significantly by compressed CO2, and the specific activity can be tuned continuously by changing pressure. The mechanism for the specific activity enhancement of the enzyme by CO2 was also studied. We believe that compressed CO2 can be utilized to tune some other enzyme catalytic reactions in different reverse micellar systems with potential advantages.

Journal Article↗
PubMed2005

Phase behaviors of AOT/longer chain n-alkanes reverse micelles in the presence of compressed ethylene.

It was found that, in a suitable pressure range, ethylene could increase the amount of solubilized water in reverse micelles of sodium bis-2-ethylhexylsulfosuccinate (AOT) in longer chain n-alkanes considerably, where the phase separation was induced by a micelle-micelle interaction mechanism. The microenvironments in the ethylene-stabilized reverse micelles were investigated by the UV-vis adsorption spectra using methyl orange (MO) as a probe. The maximum absorption of MO decreased with the increase of ethylene pressure at constant W0 value. Conductivity measurements demonstrated that the percolation temperature of the reverse micellar system increased considerably after compressed ethylene was added. The results of this work confirm that some small-molecule gases have the function of cosurfactants to stabilize reverse micelles.

Journal Article↗
PubMed2005

Synthesis of single-crystal gold nanosheets of large size in ionic liquids.

Large-size single-crystal gold nanosheets have been successfully prepared by microwave heating of HAuCl(4) in ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate, without any additional template agent. Transmission electron microscopy (TEM), electron diffraction (ED), scanning electron microscopy (SEM), and X-ray powder diffraction (XRD) were used to characterize the resultant gold nanosheets. It was demonstrated that the ionic liquid could act as template agent for the formation of gold nanosheets. The present synthesis route is very simple and fast. It can be expected that the method can be extended to the fabrication of other metal nanosheets in ionic liquids.

Journal Article↗
PubMed2005

Compressed-CO2-assisted patterning of polymers.

We report a facile route to pattern polymer surfaces with the aid of compressed CO(2), termed the compressed-CO(2)-assisted imprint method. In this method, compressed CO(2) serves as a plasticizer for polymers (such as poly(methyl methylate) and polystyrene), which leads to a tremendous reduction in the glass transition temperature and viscosity of the polymers. Nylon fabrics and anode aluminum oxide porous membranes are used as molds, respectively, to pattern the softened polymers at relatively low temperatures, resulting in patterns at the scale of micrometers and nanometers on the surface of polymer films. The patterned structures can be tuned by changing CO(2) pressure and temperature in the imprinting process. This method is simple and environmentally benign. It also can be operated at low temperatures, for instance, ambient temperature.

Journal Article↗
PubMed2005

Replication of biological organizations through a supercritical fluid route.

A novel and simple method to replicate biological organizations (cotton and pollen grains) with high precision was proposed, in which the precursor dissolved in supercritical CO2 reacted with the surface active groups and adsorbed surface water on biological templates, followed by in situ SCF extraction of the byproducts and unreacted precursor, resulting in inorganic replicas faithfully copying both the macro- and microstructures of the biotemplates.

Carbon Dioxide↗
PubMed2005

Compressed CO2 in AOT reverse micellar solution: effect on stability, percolation, and size.

The effects of compressed CO(2) in sodium bis-2-ethylhexylsulfosuccinate (AOT)/decane reversed micellar solution on the stability of the micelles, interface, and micelle/micelle interactions were studied. It was demonstrated that the compressed gas could increase the solubilization of water in this system. The formation of the stabilized one-phase microemulsion was confirmed by conductivity measurements. A shift in percolation threshold to higher temperature was observed after compressed gas was added. The gyration radius (R(g)) of the reverse micelles was determined using SAXS. R(g) increases with the addition of water, while it decreases appreciably with increasing pressure of compressed gas at fixed W(0). These results were interpreted in terms of an increase of the rigidity of the interface layer and a decrease of the interdroplet attraction. The results of this work provide useful information to get insight into the mechanism of cosurfactants to stabilize reverse micelles.

Journal Article↗
PubMed2005

Fabrication of flowerlike polymer superstructures using polymer/zeolite composites prepared with supercritical CO2.

We report a route to the fabrication of unique flowerlike polymer superstructures with uniform petals at the nanoscale. In this method, polymer/zeolite composite is first prepared by loading corresponding monomer and initiator into the channels of the host zeolite with the aid of supercritical (SC) CO2, followed by thermal polymerization of monomers in the channels of the zeolite. The resultant polymer/zeolite composite is then treated with HF aqueous solution to allow the self-aggregation of the polymer and the inorganic components to form the polymeric layers and inorganic layers. Unique microscale flowerlike polymer superstructures are obtained after further treatment with HF aqueous solution. Different techniques, such as scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and thermogravimetry (TG), have been used to characterize the microflowers.

Journal Article↗
PubMed2005

Synthesis of Ag/BSA composite nanospheres from water-in-oil microemulsion using compressed CO2 as antisolvent.

In this work, a novel route to synthesize biomolecule/metal composite nanospheres is proposed. This method combines the advantages that the silver nanoparticles and bovine serum albumin (BSA) can be precipitated simultaneously from water-in-oil microemulsion by the easy control of CO2 pressure, which was revealed by our high-pressure UV-VIS spectra. The Ag/BSA nanocomposites were successfully prepared using this method. The transmission electronic microscopy (TEM) if the obtained nanocomposites shows that the small-sized Ag nanaoparticles are immobilized by the BSA nanospheres, and the phase structure was characterized by X-ray diffraction (XRD). The Ag/BSA nanocomposites show absorption properties at a wavelength around 435 nm.

Biocompatible Materials↗
PubMed2005

Survival of virulent Mycobacterium tuberculosis involves preventing apoptosis induced by Bcl-2 upregulation and release resulting from necrosis in J774 macrophages.

Macrophage apoptosis plays a role in mycobacterial infection. To define the mechanism by which virulent Mycobacterium tuberculosis escapes apoptosis and killing in macrophages, J774 macrophages were infected with virulent M. tuberculosis H37Rv and attenuated H37Ra strains. H37Rv induced less apoptosis than H37Ra, and caspase 3 was activated in H37Ra- and H37Rv-infected macrophages. Intracellular H37Rv bacilli were released at a higher rate into the supernatant than were H37Ra by the sixth day of infection, and this was simultaneously accompanied by the increased necrosis of infected cells showing lactate dehydrogenase (LDH) release. Fas mRNA expression was downregulated and FasL was upregulated in H37Ra- and H37Rv-infected macrophages, while Bcl-2 was upregulated in H37Rv-infected macrophages but downregulated in H37Ra-infected macrophages as seen by real-time PCR. These results indicate that M. tuberculosis H37Ra and H37Rv proliferate in macrophages by preventing them from inducing apoptosis during the early phase of infection, and that M. tuberculosis H37Rv-infected macrophages are found to express Bcl-2 mRNA, which leads to anti-apoptotic activity, and that relatively distinct necrosis might occur during the later phase of infection.

Animals↗
PubMed2005

Ultrasound-induced capping of polystyrene on TiO2 nanoparticles by precipitation with compressed CO2 as antisolvent.

In this work, a route for the synthesis of inorganic/polymer core/shell composite nanoparticles was proposed, which can be called the antisolvent-ultrasound method. Compressed CO2 was used as antisolvent to precipitate the polymer from its solution dispersed with inorganic nanoparticles, during which ultrasonic irradiation was used to induce the coating of precipitated polymers on the surfaces of the inorganic nanoparticles. TiO2/polystyrene (PS) core/shell nanocomposites have been successfully prepared using this method. The transmission electronic micrographs (TEM) of the obtained nanocomposites show that the TiO2 nanoparticles are coated by the PS shells, of which the thickness can be tuned by the pressure of CO2. The phase structure, absorption properties, and thermal stability of the composite were characterized by X-ray diffraction (XRD), UV-vis spectra, and thermogravimetry, respectively. The results of X-ray photoelectron spectra (XPS) indicate the formation of a strong interaction between PS and TiO2 nanoparticles in the resultant products. This method has some potential advantages for applications and may be easily applied to the preparation of a range of inorganic/polymer core/shell composite nanoparticles.

Carbon Dioxide↗