PubMed Health⌕ Search

Biomedical subjects

Joe Tien

Publications and source records attributed to Joe Tien.

9 recordsLinked to original sources

Microstructured extracellular matrices in tissue engineering and development.

Microscale heterogeneity in the extracellular matrix (ECM) provides spatial information that allows tissues to develop and function properly in vivo. This heterogeneity in composition (chemistry) and structure (geometry) creates distinct microenvironments for the cells that comprise a tissue. In response, populations of cells can coordinate their behaviors across micrometer-to-millimeter length scales to function as a unified whole. We believe techniques to mimic the microscale heterogeneity of the ECM in vitro will revolutionize studies that examine how large groups of cells interact. Micropatterned ECMs used for engineering perfused microvascular networks and functional epidermis and for understanding symmetry-breaking events in epithelial morphogenesis illustrate potential applications in tissue engineering and development.

Animals↗

Formation of perfused, functional microvascular tubes in vitro.

This work describes the formation, perfusion, and maturation of three-dimensional microvascular tubes in vitro. These tubes consisted of confluent monolayers of human endothelial cells that lined open, cylindrical channels within collagen gels. Perivascular cells could be directly embedded within the gels or added after endothelial cells grew to confluence. The tubes spanned the entire 5-7 mm extent of the gels; their diameters initially ranged from 55 to 120 microm and increased to 75-150 microm after maturation. Endothelial tubes displayed a strong barrier function over 5 days, resisted adhesion of leukocytes, and reacted quickly to inflammatory stimuli by breakdown of the barrier and support of leukocyte adhesion. These tubes resembled venules and "giant" capillaries in both their cellular organization and function, and we believe that they will serve as useful in vitro models of inflammation under constant perfusion.

Capillary Permeability↗

Mechanotransduction at cell-matrix and cell-cell contacts.

Mechanical forces play an important role in the organization, growth, maturation, and function of living tissues. At the cellular level, many of the biological responses to external forces originate at two types of specialized microscale structures: focal adhesions that link cells to their surrounding extracellular matrix and adherens junctions that link adjacent cells. Transmission of forces from outside the cell through cell-matrix and cell-cell contacts appears to control the maturation or disassembly of these adhesions and initiates intracellular signaling cascades that ultimately alter many cellular behaviors. In response to externally applied forces, cells actively rearrange the organization and contractile activity of the cytoskeleton and redistribute their intracellular forces. Recent studies suggest that the localized concentration of these cytoskeletal tensions at adhesions is also a major mediator of mechanical signaling. This review summarizes the role of mechanical forces in the formation, stabilization, and dissociation of focal adhesions and adherens junctions and outlines how integration of signals from these adhesions over the entire cell body affects how a cell responds to its mechanical environment. This review also describes advanced optical, lithographic, and computational techniques for the study of mechanotransduction.

Animals↗

Molding of three-dimensional microstructures of gels.

This Communication describes the use of patterned elastomeric stamps to mold, release, and stack hydrogels into three-dimensional microstructures. Molding of gels against stamps derivatized by a hexa(ethylene glycol)-terminated self-assembled monolayer or by an adsorbed monolayer of bovine serum albumin allowed the application of several soft lithographic techniques (replica molding, microtransfer molding, and micromolding in capillaries) to the microfabrication of gels. We describe procedures to generate coplanar or bilayered composites of gels.

Dimethylpolysiloxanes↗

Repositioning of cells by mechanotaxis on surfaces with micropatterned Young's modulus.

Adherent cells are strongly influenced by the mechanical aspects of biomaterials, but little is known about the cellular effects of spatial variations in these properties. This work describes a novel method to produce polymeric cell culture surfaces containing micrometer-scale regions of variable stiffness. Substrates made of acrylamide or poly(dimethylsiloxane) were patterned with 100- or 10-microm resolution, respectively. Cells were cultured on fibronectin-coated acrylamide having Young's moduli of 34 kPa and 1.8 kPa, or fibronectin-coated PDMS having moduli of 2.5 MPa and 12 kPa. Over several days, NIH/3T3 cells and bovine pulmonary arterial endothelial cells accumulated preferentially on stiffer regions of substrates. The migration, not proliferation, of cells in response to mechanical patterning (mechanotaxis) was responsible for the accumulation of cells on stiffer regions. Differential remodeling of extracellular matrix protein on stiff versus compliant regions was observed by immunofluorescence staining, and may have been responsible for the observed mechanotaxis. These results suggest that mechanically patterned substrates might provide a general means to study mechanotaxis, and a new approach to patterning cells.

Acrylamide↗

Cells lying on a bed of microneedles: an approach to isolate mechanical force.

We describe an approach to manipulate and measure mechanical interactions between cells and their underlying substrates by using microfabricated arrays of elastomeric, microneedle-like posts. By controlling the geometry of the posts, we varied the compliance of the substrate while holding other surface properties constant. Cells attached to, spread across, and deflected multiple posts. The deflections of the posts occurred independently of neighboring posts and, therefore, directly reported the subcellular distribution of traction forces. We report two classes of force-supporting adhesions that exhibit distinct force-size relationships. Force increased with size of adhesions for adhesions larger than 1 microm(2), whereas no such correlation existed for smaller adhesions. By controlling cell adhesion on these micromechanical sensors, we showed that cell morphology regulates the magnitude of traction force generated by cells. Cells that were prevented from spreading and flattening against the substrate did not contract in response to stimulation by serum or lysophosphatidic acid, whereas spread cells did. Contractility in the unspread cells was rescued by expression of constitutively active RhoA. Together, these findings demonstrate a coordination of biochemical and mechanical signals to regulate cell adhesion and mechanics, and they introduce the use of arrays of mechanically isolated sensors to manipulate and measure the mechanical interactions of cells.

3T3 Cells↗

Template-directed self-assembly of 10-microm-sized hexagonal plates.

This article presents a strategy for the fabrication of ordered microstructures using concepts of design inspired by molecular self-assembly and template-directed synthesis. The self-assembling components are 4-microm-thick hexagonal metal plates having sides 10 microm in length ("hexagons"), and each template consists of a 4-microm-thick circular metal plate surrounding a central cavity, the perimeter of which is complementary in shape to the external edges of a two-dimensional, close-packed array of hexagons. The hexagons and templates (collectively, "pieces") were fabricated via standard procedures and patterned into hydrophobic and hydrophilic regions using self-assembled monolayers (SAMs). Templated self-assembly occurs in water through capillary interactions between thin films of a nonpolar liquid adhesive coating the hydrophobic faces of the pieces. The hexagons tile the cavities enclosed by the templates, and the boundaries of the cavities determine the sizes and shapes of the assemblies. Curing the adhesive with ultraviolet light furnishes mechanically stable arrays having well-defined morphologies. By allowing control over the structures of the resulting aggregates, this work represents a step toward the development of practical methods for microfabrication based on self-assembly.

Chemistry, Organic↗

Fabrication of aligned microstructures with a single elastomeric stamp.

The fabrication of complex patterns of aligned microstructures has required the use of multiple applications of lithography. Here we describe an approach for microfabrication that encodes the two-dimensional spatial information of several photomasks onto a single elastomeric stamp by mapping each photomask onto distinct heights on the surface of the stamp. Pressing the stamp against a surface collapses the topography of the stamp such that each recessed layer contacts the surface in stepwise sequence; the greater the applied pressure, the larger the area of the stamp that contacts the surface. After contact of each new layer with the surface, we use techniques of soft lithography (microcontact printing, microfluidics, and patterning through membranes) to pattern the surfaces that contact the stamp and those that do not with inorganic, organic, or living materials. Microfabrication through the use of multilevel stamps provides a promising alternative to conventional lithography for the construction of multicomponent, aligned surfaces; these structures may find use as components of microfluidic devices or biological patterns.

Animals↗