PubMed Health⌕ Search

Biomedical subjects

John E Anthony

Publications and source records attributed to John E Anthony.

14 recordsLinked to original sources
PubMed2006

Dynamics of energy transfer of a dioxolane-substituted pentacene dispersed in 4,4-bis[N-1-naphthyl-N-phenylamino]biphenyl.

We examine the steady-state and time-resolved photoluminescence of guest-host films featuring a dioxolane-substituted pentacene derivative (2,2,10,10-tetraethyl-6,14-bis(triisopropylsilylethynyl)-1,3,9,11-tetraoxadicyclopenta[b,m]pentacene, EtTP-5) dispersed in the hole transporting material (4,4-bis[N-1-naphthyl-N-phenylamino]biphenyl, alpha-NPD). The films show bright red emission (lambda(max) = 640 nm) as a result of efficient Förster energy transfer from alpha-NPD host molecules to EtTP-5 guest molecules. High absolute photoluminescence (PL) quantum yield (phi(PL) = 76% +/- 4%) and fluorescence lifetime (tau = 18.6 +/- 0.8 ns) were measured at low concentration (0.28 mol % EtTP-5), with moderate PL quenching observed upon increasing the EtTP-5 concentration. The concentrated films (> or = 1.50 mol % EtTP-5) show less evidence of aggregation than previously seen when EtTP-5 was dispersed in tris(quinolin-8-olato)aluminum(III), making alpha-NPD a superior host for the red-emitting EtTP-5.

Journal Article↗
PubMed2006

Photophysical properties of dioxolane-substituted pentacene derivatives dispersed in tris(quinolin-8-olato)aluminum(III).

Two novel dioxolane-substituted pentacene derivatives, namely, 6,14-bis-(triisopropylsilylethynyl)-1,3,9,11-tetraoxa-dicyclopenta[b,m]pentacene (TP-5) and 2,2,10,10-tetraethyl-6,14-bis-(triisopropylsilylethynyl)-1,3,9,11-tetraoxa-dicyclopenta[b,m]pentacene (EtTP-5), have been synthesized and spectroscopically characterized. Here, we examine the steady-state and time-resolved photoluminescence (PL) of solid-state composite films containing these pentacene derivatives dispersed in tris(quinolin-8-olato)aluminum(III) (Alq(3)). The films show narrow red emission and high absolute photoluminescence quantum yields (phi(PL) = 59% and 76% for films containing approximately 0.25 mol % TP-5 and EtTP-5, respectively). The Förster transfer radius for both guest-host systems is estimated to be approximately 33 A. The TP-5/Alq(3) thin films show a marked decrease in phi(PL) with increasing guest molecule concentrations, accompanied by dramatic changes in the PL spectra, suggesting that intermolecular interactions between pentacene molecules result in the formation of weakly radiative aggregates. In contrast, a lesser degree of fluorescence quenching is observed for EtTP-5/Alq(3) films. The measured fluorescence lifetimes of TP-5 and EtTP-5 are similar (approximately 18 ns) at low concentrations but deviate at higher concentrations as aggregation begins to play a role in the TP-5/Alq(3) films. The onset of aggregation in EtTP-5/Alq(3) films occurs at higher guest molecule concentrations (>1.00 mol %). The addition of ethyl groups on the terminal dioxolane rings leads to an increase in the intermolecular spacing in the solid, thereby reducing the tendency for pi-pi molecular stacking and aggregation.

Journal Article↗
PubMed2006

Clustering of pentacene and functionalized pentacene ions in a matrix-assisted laser desorption/ionization orthogonal TOF mass spectrometer.

A high-performance orthogonal time-of flight (TOF) mass spectrometer, in combination with the matrix assisted laser desorption/ionization (MALDI) source operating at elevated pressure ( approximately 1 torr in N(2)), was used to perform MALDI-TOF analyses of pentacene and some of its derivatives with and without an added matrix. These molecules are among the most interesting semiconductor materials for organic thin film transistor applications (OTFT). The observation of ion-molecule reactions between "cold" analyte ions and neutral analyte molecules in the gas phase has provided some insight into the mechanism of pentacene cluster formation and its functionalized derivatives. Furthermore, some of the matrices employed to assist the desorption/ionization process of these compounds were observed to influence the outcome via ion-molecule reactions of analyte ions and matrix molecules in the gas phase. The stability and reactivity of the compounds and their clusters in the MALDI plume during gas-phase expansion were evaluated; possible structures of the resulting clusters are discussed. The MALDI-TOF technique was also helpful in distinguishing between two isomeric forms of bis-[(triisopropylsilyl)-ethynyl]-pentacene.

Journal Article↗
PubMed2005

Synthesis and characterization of electron-deficient pentacenes.

[structure: see text]. Halogen functional groups on pentacene can be used both as synthetic handles for further functionalization as well as to tune the pi-stacking in these systems. The halogenated pentacene derivatives described here (X = Br, X' = H, and X = X' = F) are all stable and soluble, with reduction potentials significantly lower than that of the parent functionalized pentacene (X = X' = H). The bromopentacenes could be further elucidated to pentacene nitriles, further decreasing the acene's reduction potential, while the charge-carrier mobility in the fluorinated systems was shown to scale with the degree of fluorine substitution.

Journal Article↗
PubMed2005

Functionalized higher acenes: hexacene and heptacene.

We have extended our functionalization strategy for pentacene to the higher acenes hexacene and heptacene. Provided a large enough alkyne substituent is used, these large aromatic rods are both stable and soluble and can be characterized spectroscopically as well as by single-crystal X-ray diffraction.

Journal Article↗
PubMed2005

Organic field-effect transistors from solution-deposited functionalized acenes with mobilities as high as 1 cm2/V x s.

We present the device parameters for organic field-effect transistors fabricated from solution-deposited films of functionalized pentacene and anthradithiophenes. These materials are easily prepared in one or two steps from commercially available starting materials and are purified by simple recrystallization. For a solution-deposited film of functionalized pentacene, hole mobility of 0.17 cm2/V.s was measured. The functionalized anthradithiophenes showed behavior strongly dependent on the substituents, with hole mobilities as high as 1.0 cm2/V.s.

Journal Article↗
PubMed2004

Stable, crystalline acenedithiophenes with up to seven linearly fused rings.

[structure: see text] We report the synthesis of a series of crystalline acenedithiophenes with up to seven linearly fused rings and silylethynyl substituents. These functional groups are designed to both improve solubility and enhance cofacial interactions in the solid. We discuss the crystal packing of these materials, as well as their physical properties such as oxidation potential, UV-vis absorption, fluorescence emission, and decomposition pathways.

Journal Article↗
PubMed2004

Robust, soluble pentacene ethers.

We report the synthesis and characterization of a series of alkoxy-substituted silylethynylated pentacene derivatives (R = CH(2)CH(2), CHCH, CH(2)). All three compounds are easily prepared, soluble in common organic solvents, and stable both as solids and in solution. Two of the derivatives possess significant pi-face interactions in the crystal. Values for lambda(max) for these new pentacene derivatives range from 621 to 674 nm, and oxidation potentials lie between 109 and 301 mV versus ferrocene.

Journal Article↗
PubMed2004

Tellurium-mediated cycloaromatization of acyclic enediynes under mild conditions.

The cycloaromatization of acyclic enediynes typically requires very high temperatures (>160 degrees C) and dilute conditions to proceed in a synthetically useful yield. These conditions hinder reaction throughput, inhibiting the use of this reaction for the large-scale production of materials. The reaction of sodium telluride with acyclic arenediynes yields the corresponding tellurepine, which under gentle heating extrudes Te degrees to yield the cycloaromatization product. We have developed conditions that form sodium telluride from inexpensive tellurium metal in situ, and that also perform the desilylation of silylated arenediynes in the same process. Under our conditions, we are able to perform desilylation and cycloaromatization at temperatures as low as 40 degrees C and on a scale as large as 5 g in standard laboratory glassware.

Journal Article↗
PubMed2003

Tetracene derivatives as potential red emitters for organic LEDs.

[structure: see text] As part of our program investigating the use of ethynylated acenes in organic electronics, we have prepared a series of functionalized tetracene derivatives in search of a material with red emission suitable for use in display technologies. A number of such compounds with functionalization on the alkyne and/or the acene ring were easily prepared in one or two steps from commercially available materials. Solution fluorescence quantum efficiencies were generally good for these derivatives, which possessed emission maxima spanning the range 540-637 nm. Simple light-emitting diodes fabricated from these compounds showed that one of the derivatives did exhibit red electroluminescence.

Journal Article↗
PubMed2002

A road map to stable, soluble, easily crystallized pentacene derivatives.

[structure: see text] A series of 6,13-disubstituted pentacenes, in which the substituents are functionalized ethyne units, were synthesized and analyzed by X-ray crystallography. The resulting pentacene derivatives were highly soluble and oxidatively stable and exhibited a significant amount of pi-stacking in the crystal.

Journal Article↗
PubMedDate not supplied

Hybrid nanoparticles based on organized protein immobilization on fullerenes.

Nanoscale carbon materials (i.e., fullerenes and nanotubes) are an attractive platform for applications in biotransformations and biosensors. The interesting properties displayed by nanoparticles demand new strategies for the manipulation of these materials on the nanoscale. Controlled modification of their surface with biomolecules is required to fully realize their potential in bionanotechnology. In this work, immobilization of a fullerene derivative with a mutant subtilisin is demonstrated, and the effect of the fullerene on the protein activity is determined. The fullerene-conjugated enzyme had improved catalytic properties in comparison to subtilisin immobilized on nonporous silica. Further, the pH profile of free and fullerene-conjugated subtilisin were almost identical.

Enzymes, Immobilized↗
PubMedDate not supplied

Coupling biomolecules to fullerenes through a molecular adapter.

A novel biotinylated fullerene has been synthesized to facilitate the attachment of biotin-conjugated proteins to C(60) through the use of streptavidin as a molecular adapter. The strong biotin-streptavidin interaction enables the attachment of fullerenes to streptavidin and, because of the availability of four biotin-binding sites on streptavidin, to biotinylated biomolecules. The feasibility of this approach is demonstrated by using biotinylated alkaline phosphatase. Due to the insolubility of fullerenes in aqueous media, the immobilized enzyme can be eventually recovered by simple centrifugation with no significant loss in activity.

Alkaline Phosphatase↗