Biomedical subjects

John E Sader

Publications and source records attributed to John E Sader.

6 recordsLinked to original sources

PubMed2006

Structured water layers adjacent to biological membranes.

Water amid the restricted space of crowded biological macromolecules and at membrane interfaces is essential for cell function, though the structure and function of this "biological water" itself remains poorly defined. The force required to remove strongly bound water is referred to as the hydration force and due to its widespread importance, it has been studied in numerous systems. Here, by using a highly sensitive dynamic atomic force microscope technique in conjunction with a carbon nanotube probe, we reveal a hydration force with an oscillatory profile that reflects the removal of up to five structured water layers from between the probe and biological membrane surface. Further, we find that the hydration force can be modified by changing the membrane fluidity. For 1,2-dipalmitoyl-sn-glycero-3-phosphocholine gel (Lbeta) phase bilayers, each oscillation in the force profile indicates the force required to displace a single layer of water molecules from between the probe and bilayer. In contrast, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine fluid (Lalpha) phase bilayers at 60 degrees C and 1,2-dioleoyl-sn-glycero-3-phosphocholine fluid (Lalpha) phase bilayers at 24 degrees C seriously disrupt the molecular ordering of the water and result predominantly in a monotonic force profile.

1,2-Dipalmitoylphosphatidylcholine↗

PubMed2006

Microstructure-hardened silver nanowires.

To exploit the novel size-dependent mechanical properties of nanowires, it is necessary for one to develop strategies to control the strength and toughness of these materials. Here, we report on the mechanical properties of silver nanowires with a unique fivefold twin structure using a lateral force atomic force microscopy (AFM) method in which wires are held in a double-clamped beam configuration. Force-displacement curves exhibit super elastic behavior followed by unexpected brittle failure without significant plastic deformation. Thermal annealing resulted in a gradual transition to weaker, more ductile materials associated with the elimination of the twinned boundary structure. These results point to the critical roles of microstructure and confinement in engineering the mechanical properties of nanoscale materials.

Journal Article↗

PubMed2006

A generalized description of the elastic properties of nanowires.

We report a model of nanowire (NW) mechanics that describes force vs displacement curves over the entire elastic range for diverse wire systems. Due to the clamped-wire measurement configuration, the force response in the linear elastic regime can be linear or nonlinear, depending on the system and the wire displacement. For Au NWs the response is essentially linear since yielding occurs prior to the onset of the inherent nonlinearity, while for Si NWs the force response is highly nonlinear, followed by brittle fracture. Since the method describes the entire range of elastic deformation, it unequivocally identifies the yield points in both of these materials.

Computer-Aided Design↗

PubMed2006

Ultimate-strength germanium nanowires.

Semiconducting nanowires (NWs) are important "building blocks" for potential electrical and electromechanical devices. Here, we report on the mechanical properties of supercritical fluid-grown Ge NWs with radii between 20 and 80 nm. An analysis of the bending and tensile stresses during deformation and failure reveals that while the NWs have a Young's modulus comparable to the bulk value, they have an ultimate strength of 15 GPa, which is the maximum theoretical strength of these materials. This exceptional strength is the highest reported for any conventional semiconductor material and demonstrates that these NWs are without defect or flaws that compromise the mechanical properties.

Journal Article↗

PubMed2005

Frequency modulation atomic force microscopy reveals individual intermediates associated with each unfolded I27 titin domain.

In this study, we apply a dynamic atomic force microscopy (AFM) technique, frequency modulation (FM) detection, to the mechanical unfolding of single titin I27 domains and make comparisons with measurements made using the AFM contact or static mode method. Static mode measurements revealed the well-known force transition occurring at 100-120 pN in the first unfolding peak, which was less clear, or more often absent, in the subsequent unfolding peaks. In contrast, some FM-AFM curves clearly resolved a force transition associated with each of the unfolding peaks irrespective of the number of observed unfolded domains. As expected for FM-AFM, the frequency shift response of the main unfolding peaks and their intermediates could only be detected when the oscillation amplitudes used were smaller than the interaction lengths being measured. It was also shown that the forces measured for the dynamical interaction of the FM-AFM technique were significantly lower than those measured using the static mode. This study highlights the potential for using dynamic AFM for investigating biological interactions, including protein unfolding and the detection of novel unfolding intermediates.

Aluminum Silicates↗

PubMed2003

Vibrational response of nanorods to ultrafast laser induced heating: theoretical and experimental analysis.

In this paper, we elucidate the vibrational response of cylindrical nanorods to ultrafast laser-induced heating. A theoretical analysis of the expected behavior is first presented. This analysis predicts that both extensional and breathing vibrational modes of the rods should be excited by laser-induced heating. Analytical formulas are derived assuming that the heating/expansion process is instantaneous, and that the lengths of the rods are much greater than their radii. These results show that the breathing mode dominates the mechanical deformation of the rod. However, because the frequency of the extensional mode is much lower than that of the breathing mode, the extensional mode will dominate the response for a real experiment (a finite-time heating/expansion process). The results of this model are compared to data from transient absorption experiments performed on gold nanorods with average lengths between 30 and 110 nm. The transient absorption traces show pronounced modulations with periods between 40 and 120 ps, which are only observed when the probe laser is tuned to the longitudinal plasmon band. The measured periods are in good agreement with the expected values for the extensional modes of the rods. For rods wider than 20 nm, the breathing mode can also be observed and, again, the measured periods are in good agreement with the theoretical calculations. The breathing mode is not observed for thinner rods (<20 nm width) because, in this case, the period is comparable to the time scale for lattice heating.

Journal Article↗