Biomedical subjects

John M Gosline

Publications and source records attributed to John M Gosline.

11 recordsLinked to original sources

PubMed2006

Hagfish slime ecomechanics: testing the gill-clogging hypothesis.

Hagfish are able to produce substantial amounts of slime when harassed, but the precise ecological function of the slime is unclear. One possibility is that the slime acts as a defence against gill-breathing predators, whose gills may become entangled with the slime's mixture of mucins and fibrous threads during an attack. We previously demonstrated that hagfish slime does not bind water tightly, but instead behaves like a fine sieve that slows water down via viscous entrainment. These properties are consistent with the gill-clogging hypothesis, which we tested here by quantifying the effects of hagfish slime on water flow through an artificial gill model and real fish gills. Our results indicate that the slime is capable of clogging gills and increasing the resistance that they present to the flow of water. We also characterized the behaviour of slime release from live hagfish and the effect of convective mixing on the formation of slime in vitro. Our observations show that exudate is locally released from the slime glands as a coherent jet and that hagfish do not appear to use their slime as a protective envelope. We found that convective mixing between the exudate and seawater is necessary for proper slime formation, but excessive mixing leads to the slime's collapse. We suggest that the loose binding of water by the slime may be an optimal solution to the problem of delivering an expanding jet of flow-inhibiting material to the gills of would-be predators.

Animals↗

PubMed2005

Fast-start muscle dynamics in the rainbow trout Oncorhynchus mykiss: phase relationship of white muscle shortening and body curvature.

Muscle length changes of the lateral myotomal fast fibers of rainbow trout (Oncorhynchus mykiss) were measured using sonomicrometry during induced fast-starts. Simultaneous high-speed videography allowed for the analysis of midline kinematics to estimate the degree of muscle strain that occurs during body deformation. Comparison of these data was used to examine the phase relationship between local muscle shortening and local body bending during unsteady, large amplitude maneuvers. Our analysis finds that muscle shortening is temporally decoupled from body bending, probably due to the influence of hydrodynamic forces. The phase shift was such that midline curvature lagged behind muscle shortening at both the anterior (0.4 L, where L is fork length) and posterior (0.7 L) axial positions. Stronger escape responses were correlated with high peak strains and rapid strain-wave velocities, but not faster curvature-wave velocities. Under these conditions of high strain, the phase shift at the posterior position is significantly increased, whereas the anterior position fails to be affected. Curvature lag was still observed at both axial locations under conditions of low strain, suggesting that hydrodynamic forces are still significant during weaker escape responses. These data support a previous model that suggests fast-start body bending is determined by the interaction between muscle torque and hydrodynamic resistance along the body.

Animals↗

PubMed2005

The modulus of elasticity of fibrillin-containing elastic fibres in the mesoglea of the hydromedusa Polyorchis penicillatus.

Hydromedusan jellyfish swim by rhythmic pulsation of their mesogleal bells. A single swimming muscle contracts to create thrust by ejecting water from the subumbrellar cavity. At the end of the contraction, energy stored in the deformation of the mesogleal bell powers the refilling stage, during which water is sucked back into the subumbrellar cavity. The mesoglea is a mucopolysaccharide gel reinforced with radially oriented fibres made primarily of a protein homologous to mammalian fibrillin. Most of the energy required to power the refill stroke is thought to be stored by stretching these fibres. The elastic modulus of similar fibrillin-rich fibres has been measured in other systems and found to be in the range of 0.2 to 1.1 MPa. In this paper, we measured the diameters of the fibres, their density throughout the bell, and the mechanical behaviour of the mesoglea, both in isolated samples and in an intact bell preparation. Using this information, we calculated the stiffness of the fibres of the hydromedusa Polyorchis penicillatus, which we found to be approximately 0.9 MPa, similar in magnitude to other species. This value is two orders of magnitude more compliant than the stiffness of the component fibrillin microfibrils previously reported. We show that the structure of the radial fibres can be modelled as a parallel fibre-reinforced composite and reconcile the stiffness difference by reinterpreting the previously reported data. We separate the contributions to the bell elasticity of the fibres and mesogleal matrix and calculate the energy storage capacity of the fibres using the calculated value of their stiffness and measured densities and diameters. We conclude that there is enough energy potential in the fibres alone to account for the energy required to refill the subumbrellar cavity.

Animals↗

PubMed2005

Composition, morphology and mechanics of hagfish slime.

Hagfish slime consists of mucins and protein threads that are released from slime glands and mix with seawater to produce an ephemeral material with intriguing physical properties. We recently characterized the mechanics of the slime's fibrous component, and here we report the first mechanical properties of the mucin component and the slime as a whole. Our results suggest that hagfishes can produce remarkable quantities of the slime because it is almost three orders of magnitude more dilute than typical mucus secretions. Mechanical experiments using whole slime produced in vitro demonstrate that the slime threads dominate the slime's material properties and impart elasticity. Mucins impart viscosity at the strain rates tested and are important for rapid deployment of the slime. We also found that slime threads are tapered at both ends, which suggested to us that hagfish slime might best be modeled as a discontinuous fibre-reinforced composite. Our measurements demonstrate that the mucins are not capable of providing shear linkage between threads, but this is not necessary because the threads are long enough to span an entire slime mass. Our findings suggest that hagfish slime consists mainly of bulk seawater entrained between mucin-coated threads, and in this way functions more like a fine sieve than coherent mucus. These results are consistent with the hypothesis that the slime has evolved as a defense against gill-breathing predators.

Animals↗

PubMed2004

Molecular design of the alpha-keratin composite: insights from a matrix-free model, hagfish slime threads.

We performed mechanical tests on a matrix-free keratin model-hagfish slime threads-to test the hypothesis that intermediate filaments (IFs) in hydrated hard alpha-keratins are maintained in a partly dehydrated state. This hypothesis predicts that dry IFs should possess mechanical properties similar to the properties of hydrated hard alpha-keratins, and should swell more than hard alpha-keratins in water. Mechanical and swelling measurements of hagfish threads were consistent with both of these predictions, suggesting that an elastomeric keratin matrix resists IF swelling and keeps IF stiffness and yield stress high. The elastomeric nature of the matrix is indirectly supported by the inability of matrix-free IFs (i.e. slime threads) to recover from post-yield deformation. We propose a general conceptual model of the structural mechanics of IF-based materials that predicts the effects of hydration and cross-linking on stiffness, yield stress and extensibility.

Animals↗

PubMed2003

Recombinant human elastin polypeptides self-assemble into biomaterials with elastin-like properties.

Processes involving self-assembly of monomeric units into organized polymeric arrays are currently the subject of much attention, particularly in the areas of nanotechnology and biomaterials. One biological example of a protein polymer with potential for self-organization is elastin. Elastin is the extracellular matrix protein that imparts the properties of extensibility and elastic recoil to large arteries, lung parenchyma, and other tissues. Tropoelastin, the approximately 70 kDa soluble monomeric form of elastin, is highly nonpolar in character, consisting essentially of 34 alternating hydrophobic and crosslinking domains. Crosslinking domains contain the lysine residues destined to form the covalent intermolecular crosslinks that stabilize the polymer. We and others have suggested that the hydrophobic domains are sites of interactions that contribute to juxtaposition of lysine residues in preparation for crosslink formation. Here, using recombinant polypeptides based on sequences in human elastin, we demonstrate that as few as three hydrophobic domains flanking two crosslinking domains are sufficient to support a self-assembly process that aligns lysines for zero-length crosslinking, resulting in formation of the crosslinks of native elastin. This process allows fabrication of a polymeric matrix with solubility and mechanical properties similar to those of native elastin.

Biocompatible Materials↗

PubMed2003

The mechanical properties of hydrated intermediate filaments: insights from hagfish slime threads.

Intermediate filaments (IFs) impart mechanical integrity to cells, yet IF mechanics are poorly understood. It is assumed that IFs in cells are as stiff as hard alpha-keratin, F-actin, and microtubules, but the high bending flexibility of IFs and the low stiffness of soft alpha-keratins suggest that hydrated IFs may be quite soft. To test this hypothesis, we measured the tensile mechanics of the keratin-like threads from hagfish slime, which are an ideal model for exploring the mechanics of IF bundles and IFs because they consist of tightly packed and aligned IFs. Tensile tests suggest that hydrated IF bundles possess low initial stiffness (E(i) = 6.4 MPa) and remarkable elasticity (up to strains of 0.34), which we attribute to soft elastomeric IF protein terminal domains in series with stiffer coiled coils. The high tensile strength (180 MPa) and toughness (130 MJ/m(3)) of IF bundles support the notion that IFs lend mechanical integrity to cells. Their long-range elasticity suggests that IFs may also allow cells to recover from large deformations. X-ray diffraction and congo-red staining indicate that post-yield deformation leads to an irreversible alpha-->beta conformational transition in IFs, which leads to plastic deformation, and may be used by cells as a mechanosensory cue.

Animals↗

PubMed2003

Form and function of the bulbus arteriosus in yellowfin tuna (Thunnus albacares), bigeye tuna (Thunnus obesus) and blue marlin (Makaira nigricans): static properties.

The juxtaposition of heart and gills in teleost fish means that the Windkessel function characteristic of the whole mammalian arterial tree has to be subserved by the extremely short ventral aorta and bulbus arteriosus. Over the functional pressure range, arteries from blue marlin (Makaira nigricans) and yellowfin tuna (Thunnus albacares) have J-shaped pressure-volume (P-V) loops, while bulbi from the same species have r-shaped P-V loops, with a steep initial rise followed by a compliant plateau phase. The steep initial rise in pressure is due to the geometry of the lumen. The interactions between radius, pressure and tension require a large initial pressure to open the bulbar lumen for flow. The plateau is due to the unique organization of the bulbar wall. The large elastin:collagen ratio, limited amount of collagen arranged circumferentially, lack of elastin lamellae and low hydrophobicity of the elastin itself all combine to lower stiffness, increase extensibility and allow efficient recoil. Even though the modulus of bulbus material is much lower than that of an artery, at large volumes the overall stiffness of the bulbus increases rapidly. The morphological features that give rise to the special inflation characteristics of the bulbus help to extend flow and maintain pressure during diastole.

Animals↗

PubMed2003

Form and function of the bulbus arteriosus in yellowfin tuna (Thunnus albacares): dynamic properties.

The bulbus arteriosus of the teleost heart possesses a static inflation curve that is r-shaped over the in vivo pressure range. To examine the possible significance of this in living animals, we recorded arterial blood pressure from anaesthetized yellowfin tuna and utilized a video dimensional analyser to simultaneously record changes in bulbar diameter. By plotting the changes in pressure against the changes in diameter, it was possible to create dynamic pressure-diameter (P-D) loops as well as calculate the instantaneous volume changes within the bulbus. The dynamic P-D loops showed the same features exhibited by static inflation. When nearly empty, a small stroke volume caused a large increase in blood pressure, while around systolic pressure large changes in volume resulted in small changes in pressure. We conclude that these features allow the bulbus to maintain ventral aortic flows and pressures over a large range of volumes.

Animals↗

PubMedDate not supplied

Consequences of forced silking.

The forced silking of a spider to obtain major ampullate (MA) silk for experiments is a standard practice; however, this method may have profound effects on the resulting silk's properties. Experiments were performed to determine the magnitude of the difference in the forces required to draw silk from the MA gland between unrestrained spiders descending on their draglines and restrained spiders from which MA silk was drawn with a motor. The results show that freely falling spiders can spool silk with as little as 0.1 body weights of force, which generates a stress that is about 2% of the silk's tensile strength. In contrast, forcibly silked spiders apply as much as 4 body weights of force with an internal braking mechanism, and this force creates silk stresses in excess of 50% of the silk's tensile strength. The large forces observed in forced silking should strongly affect the draw alignment of the polymer network in the newly spun fibers, and this may account for the differences in material properties observed between naturally spun and forcibly spun MA silks. In addition, the heat produced by the internal friction brake during forced silking may set the upper limit of forced silking speed.

Animals↗

PubMedDate not supplied

Supercontraction stress in spider webs.

Silk produced from the major ampullate (MA) gland supercontracts when wet, and in this paper, we investigate the consequences of high humidity and of the added load of water droplets condensing from saturated air on the mechanical integrity of the spiders' orb web. We measured the development of the supercontraction stress (sigma(sc)) with time when fixed lengths of MA silk from Nephila clavipes and Argiope aurantia were exposed to increasing humidity. Supercontraction generated stresses of about 50 MPa, and extension of these samples to stresses between 150 and 1100 MPa show a time dependent relaxation over 1000 s to approximately 75% of the initial tension but show no indication of failure. We conclude that supercontraction can maintain tension in webs and does not limit the ability of the web to support loads in excess of the supercontraction stress.

Animals↗