PubMed Health⌕ Search

Biomedical subjects

John M Wozney

Publications and source records attributed to John M Wozney.

At least 19 recordsLinked to original sources
PubMed2006

rhBMP-2/calcium phosphate matrix accelerates osteotomy-site healing in a nonhuman primate model at multiple treatment times and concentrations.

BACKGROUND: While recombinant human bone morphogenetic protein-2 (rhBMP-2) administered in a calcium phosphate cement accelerates osteotomy-site healing in animal models when administered three hours after surgery, definitive fracture treatment is often delayed. The present study evaluated the ability of rhBMP-2, administered in a new particulating calcium phosphate matrix, to accelerate nonhuman primate fibular osteotomy-site healing following treatment at multiple treatment times and concentrations. METHODS: The ability of 1.5-mg/mL rhBMP-2/calcium phosphate matrix to accelerate osteotomy-site healing when administered three hours, one day, one week, or two weeks after surgery was first evaluated with use of bilateral proximal and distal fibular osteotomy sites in adult male monkeys. In a second study, the healing of osteotomy sites that had been treated with the administration of calcium phosphate matrix alone and with different concentrations of rhBMP-2/calcium phosphate matrix (0.5 mg/mL, 1.5 mg/mL, or 4.5 mg/mL) seven days after surgery was compared with that of contralateral, untreated osteotomy sites. In a third study, the histologic progression of osteotomy-site healing following treatment with 1.5-mg/mL rhBMP-2/calcium phosphate matrix or calcium phosphate matrix alone, administered three hours or one week after surgery to the osteotomy site, was assessed at multiple time points for as long as twenty-four months after surgery. RESULTS: Radiographs demonstrated increased callus area and more rapid healing in response to 1.5-mg/mL rhBMP-2/calcium phosphate matrix administered over the range of treatment times after surgery as compared with the findings of previous reports on untreated osteotomy sites. Bone formation appeared at the osteotomy sites sooner following treatment at one and two weeks as compared with the findings at the earlier time-points. Scintigraphic imaging at one day and one week after surgery showed prolonged retention of rhBMP-2 at the osteotomy site following an initial burst release. In the second study, radiographic, peripheral quantitative computed tomographic, biomechanical, and microscopic evaluation demonstrated that administration of 1.5 and 4.5-mg/mL rhBMP-2/calcium phosphate matrix one week after surgery accelerated osteotomy-site healing by 40% to 50% compared with the findings in untreated controls. The magnitude of acceleration was less in response to 0.5-mg/mL rhBMP-2/calcium phosphate matrix, and calcium phosphate matrix alone did not accelerate osteotomy-site healing. Histological evaluation indicated that an increased cellular infiltrate and increased direct bone formation contributed to the accelerated osteotomy-site healing following administration of rhBMP-2/calcium phosphate matrix at one week compared with three hours after surgery. CONCLUSIONS: A single percutaneous injection of rhBMP-2/calcium phosphate matrix accelerated healing in nonhuman primate fibular osteotomy sites over a wide range of treatment times. Efficacy was optimized in association with the administration of 1.5-mg/mL rhBMP-2/calcium phosphate matrix. Delaying treatment for one week further accelerated healing because of an increase in the number of responding cells and an increase in direct bone formation.

Animals↗
PubMed2006

rhBMP-2 delivered in a calcium phosphate cement accelerates bridging of critical-sized defects in rabbit radii.

BACKGROUND: Treatment of segmental bone loss remains a challenge in skeletal repairs. This study was performed to evaluate the efficacy of the use of recombinant bone morphogenetic protein-2 (rhBMP-2) delivered in an injectable calcium phosphate cement (alpha bone substitute material [alpha-BSM]) to bridge critical-sized defects in the rabbit radius. METHODS: Unilateral 20-mm mid-diaphyseal defects were created in the radii of thirty-six skeletally mature New Zealand White rabbits. The defects in twelve rabbits each were filled with 0.166 mg/mL rhBMP-2/alpha-BSM cement, 0.033 mg/mL rhBMP-2/alpha-BSM cement, or buffer/alpha-BSM cement. Six rabbits from each group were killed at four weeks, and six were killed at eight weeks. Serial radiographs were made to monitor defect-bridging and residual alpha-BSM carrier. A semiquantitative histological scoring system was used to evaluate defect-bridging. Histomorphometry was used to quantify residual alpha-BSM; trabecular bone area; trabecular bone volume fraction; and cortical length, width, and area. RESULTS: At four weeks, there had been more rapid resorption of alpha-BSM and filling of the defects with trabecular bone in the group treated with 0.166 mg/mL rhBMP-2/alpha-BSM than in the other two groups. Histomorphometry confirmed an increased trabecular area and volume fraction in this group compared with the other two groups. In both rhBMP-2/alpha-BSM-treated groups, the majority of the trabecular bone was formed by a direct process adjacent to the resorbing alpha-BSM. At eight weeks, complete cortical bridging and regeneration of the marrow space were present in all of the defects treated with 0.166 mg/mL rhBMP-2/alpha-BSM. That group also had reduced residual alpha-BSM and trabecular area and volume, compared with the other two groups, at eight weeks as a result of a rapid remodeling process. CONCLUSIONS: Treatment of a critical-sized defect in a rabbit radius with 0.166 mg/mL rhBMP-2/alpha-BSM injectable cement can result in bridging with cortical bone and a regenerated bone-marrow space by eight weeks. Site-specific remodeling appears to be responsible for corticalization and marrow regeneration. CLINICAL RELEVANCE: RhBMP-2 delivered in a calcium phosphate cement may be useful to achieve bridging of critical-sized defects in patients. Its injectable properties may allow minimally invasive use. Delayed percutaneous administration would also be possible when augmentation is desired following an initial surgical procedure or when soft-tissue injuries preclude adequate initial treatment.

Animals↗
PubMed2005

Observations on healing following endodontic surgery in nonhuman primates (Macaca fascicularis): effects of rhBMP-2.

OBJECTIVES: The potential of recombinant human bone morphogenetic protein-2 (rhBMP-2) to enhance bone healing following endodontic surgery was tested. The pattern and timing of de novo bone formation and cementum regeneration, and the potential for root resorption and ankylosis to accompany bone formation were evaluated. STUDY DESIGN: Pulpal infections were induced in maxillary and mandibular incisor teeth in young adult Cynomolgus monkeys. The teeth received conventional endodontic treatment immediately followed by surgical root resection. In a randomized split-mouth design, contralateral apical bone defects received rhBMP-2 in absorbable collagen sponge (ACS) carrier or served as sham-surgery controls to provide histological and radiographic evaluations following 1 (mandibular incisors) and 4.5 (maxillary incisors) month(s) postsurgery. RESULTS: At 1 month postsurgery trabecular bone filled the apical bone defects. The newly formed bone appeared considerably more mature and had assumed characteristics of the contiguous resident bone at 4.5 months postsurgery. The resected root tips were almost completely covered by new cementum with a maturing functionally oriented periodontal ligament. Localized inflammatory infiltrates were associated with the filled root canals and extruded root-filling material. Root resorption and ankylosis were not observed. There were no apparent differences in healing patterns between sites implanted with rhBMP-2/ACS and those serving as sham-surgery controls. CONCLUSIONS: Under conditions where the influence of infectious elements and irritation caused by root filling material are minimized, bone formation and cementum regeneration appears rapid following endodontic surgery. rhBMP-2/ACS did not offer an obvious benefit above and beyond that of the native osteogenic potential in this animal model.

Alveolar Bone Loss↗
PubMed2005

Dlx5 specifically regulates Runx2 type II expression by binding to homeodomain-response elements in the Runx2 distal promoter.

Two major isoforms of the Runx2 gene are expressed by alternative promoter usage: Runx2 type I (Runx2-I) is derived from the proximal promoter (P2), and Runx2 type II (Runx2-II) is produced by the distal promoter (P1). Our previous results indicate that Dlx5 mediates BMP-2-induced Runx2 expression and osteoblast differentiation (Lee, M.-H., Kim, Y-J., Kim, H-J., Park, H-D., Kang, A-R., Kyung, H.-M., Sung, J-H., Wozney, J. M., Kim, H-J., and Ryoo, H-M. (2003) J. Biol. Chem. 278, 34387-34394). However, little is known of the molecular mechanisms by which Dlx5 up-regulates Runx2 expression in BMP-2 signaling. Here, Runx2-II expression was found to be specifically stimulated by BMP-2 treatment or by Dlx5 overexpression. In addition, BMP-2, Dlx5, and Runx2-II were found to be expressed in osteogenic fronts and parietal bones of the developing cranial vault and Runx2-I and Msx2 in the sutural mesenchyme. Furthermore, Runx2 P1 promoter activity was strongly stimulated by Dlx5 overexpression, whereas Runx2 P2 promoter activity was not. Runx2 P1 promoter deletion analysis indicated that the Dlx5-specific response is due to sequences between -756 and -342 bp of the P1 promoter, where three Dlx5-response elements are located. Dlx5 responsiveness to these elements was confirmed by gel mobility shift assay and site-directed mutagenesis. Moreover, Msx2 specifically suppressed the Runx2 P1 promoter, and the responsible region overlaps with that recognized by Dlx5. In summary, Dlx5 specifically transactivates the Runx2 P1 promoter, and its action on the P1 promoter is antagonized by Msx2.

Animals↗
PubMed2005

Delivery of bone morphogenetic proteins for orthopedic tissue regeneration.

Carriers for bone morphogenetic proteins (BMPs) are used to increase retention of these factors at orthopedic treatment sites for a sufficient period of time to allow regenerative tissue forming cells to migrate to the area of injury and to proliferate and differentiate. Carriers can also serve as a matrix for cell infiltration while maintaining the volume in which repair tissue can form. Carriers have to be biocompatible and are often required to be bioresorbable. Carriers also have to be easily, and cost-effectively, manufactured for large-scale production, conveniently sterilized and have appropriate storage requirements and stability. All of these processes have to be approvable by regulatory agencies. The four major categories of BMP carrier materials include natural polymers, inorganic materials, synthetic polymers, composites of these materials. Autograft or allograft carriers have also used. Carrier configurations range from simple depot delivery systems to more complex systems mimicking the extracellular matrix structure and function. Bone regenerative carriers include depot delivery systems for fracture repair, three-dimensional polymer or ceramic composites for segmental repairs and spine fusion and metal or metal/ceramic composites for augmenting implant integration. Tendon/ligament regenerative carriers range from depot delivery systems to three-dimensional carriers that are either randomly oriented or linearly oriented to improve regenerative tissue alignment. Cartilage regenerative systems generally require three-dimensional matrices and often incorporate cells in addition to factors to augment the repair. Alternative BMP delivery systems include viral vectors, genetically altered cells, conjugated factors and small molecules.

Animals↗
PubMed2005

Evaluation of recombinant human bone morphogenetic protein-2 on the repair of alveolar ridge defects in baboons.

BACKGROUND: The objective of this study was to evaluate alveolar ridge augmentation following surgical implantation of recombinant human bone morphogenetic protein-2 (rhBMP-2) using two novel space-providing carrier technologies in the baboon (Papio anubis) model. METHODS: Standardized alveolar ridge defects ( approximately 15 x 8 x 5 mm) were surgically produced in maxillary and mandibular edentulous areas in four baboons. The defect sites were implanted with rhBMP-2 (0.4 mg/mL) in a tricalcium phosphate/hydroxyapatite/ absorbable collagen sponge composite (TCP/HA/ACS) or calcium phosphate cement (alpha-BSM). Control treatments were TCP/HA/ACS and ?-BSM without rhBMP-2 and sham surgery. Stainless steel pins were placed at the mid-apical and coronal level of the defect sites to provide landmarks for clinical measurements pre- and post-implantation. Impressions were obtained pre- and postimplantation to determine changes in alveolar ridge volume. Radiographic registrations were obtained pre- and post-implantation. Block sections of the defect sites were harvested at week 16 postimplantation and processed for histometric analysis including new bone area and bone density. Statistical comparisons between treatments were made using a mixed effect generalized linear model using least squares estimation. RESULTS: The carrier systems without rhBMP-2 provided a modest ridge augmentation. The addition of rhBMP-2 resulted in an almost 2-fold increase in alveolar ridge width, including a greater percentage of trabecular bone and a higher bone density compared to controls (P < or =0.05) without significant differences between the two rhBMP-2 protocols. CONCLUSIONS: TCP/HA/ACS and alphaBSM appear to be suitable carrier technologies for rhBMP-2. Alveolar augmentation procedures using either technology combined with rhBMP-2, rather than stand-alone therapies, may provide clinically relevant augmentation of alveolar ridge defects for placement of endosseous dental implants.

Absorbable Implants↗
PubMed2004

Bone morphogenetic protein-2-induced alkaline phosphatase expression is stimulated by Dlx5 and repressed by Msx2.

Alkaline phosphatase (ALP) is a widely accepted bone marker. Its expression is stimulated by bone morphogenetic protein (BMP)-2 treatment, the activation of BMP receptors and R-Smads, and the expression of Dlx5 and Runx2. However, how BMP-2 induces ALP expression is not clearly understood. We dissected the murine ALP promoter and found within it a Dlx5-binding cis-acting element by electrophoretic mobility shift assays and site-directed mutagenesis of the element. Dlx5 and the product of its target gene, Runx2, stimulated ALP promoter activity in an additive manner. However, because Dlx5 continued to stimulate ALP expression in Runx2(-/-) cells, the ALP stimulatory activity of Dlx5 is independent of Runx2. We also found that overexpression of Msx2 suppressed the mRNA level and enzyme activity of ALP that were induced by BMP-2 stimulation, and suppressed the Dlx5-stimulated ALP promoter activity by competing with Dlx5 for the cis-acting element in the ALP promoter. Moreover, Msx2 levels are constitutively high in C2C12 myogenic cells but decrease over time after BMP-2 treatment. This may explain why BMP-2 treatment of these cells results in immediate Dlx5 expression yet ALP expression commences only 1-2 days later. In other words, Msx2 in high levels counteracts initially the transcriptional activity of Dlx5 in low levels until a threshold Dlx5:Msx2 ratio is reached to the levels that allow the ALP stimulatory activity of Dlx5 to prevail. Thus, Dlx5 transactivates ALP expression, directly by binding to its cognate response element and/or indirectly by stimulating Runx2 expression, and Msx2 counteracts the direct transactivation of Dlx5.

Alkaline Phosphatase↗
PubMed2004

Protein-based tissue engineering in bone and cartilage repair.

Bioactive proteins signal host or transplanted cells to form the desired tissue type. Matrix systems are utilized to locally deliver the proteins and to maintain effective protein concentrations. For some indications, a matrix is required to define the physical form of the regenerated tissue. Substantial progress has been made in bone tissue engineering in recent years, based on the results of controlled clinical studies using bone morphogenetic proteins. Ongoing research in this area centers on the design of additional delivery matrices to expand the clinical indications, using synthetic delivery systems that mimic biological qualities of the natural materials currently in use. Although a similar rationale exists for the regeneration of articular cartilage with bioactive factors, advancement in this area has not been as substantial.

Animals↗
PubMed2004

rhBMP-2 significantly enhances guided bone regeneration.

BACKGROUND: Previous studies have shown a limited potential for bone augmentation following guided bone regeneration (GBR) in horizontal alveolar defects. Surgical implantation of recombinant human bone morphogenetic protein-2 (rhBMP-2) in an absorbable collagen sponge carrier (ACS) significantly enhances bone regeneration in such defects; however, sufficient quantities of bone for implant dentistry are not routinely obtained. The objective of this study was to evaluate the potential of rhBMP-2/ACS to enhance GBR using a space-providing, macro-porous expanded polytetrafluoroethylene (ePTFE) device. METHODS: Bilateral, critical size, supra-alveolar, peri-implant defects were surgically created in four Hound Labrador mongrel dogs. Two turned and one surface-etched 10-mm titanium dental implant were placed 5 mm into the surgically reduced alveolar ridge creating 5-mm supra-alveolar defects. rhBMP-2/ACS (rhBMP-2 at 0.2 mg/ml) or buffer/ACS was randomly assigned to left and right jaw quadrants in subsequent animals. The space-providing, macro-porous ePTFE device was placed to cover rhBMP-2/ACS and control constructs and dental implants. Gingival flaps were advanced for primary wound closure. The animals were euthanized at 8 weeks postsurgery for histologic and histometric analysis. RESULTS: Bone formation was significantly enhanced in defects receiving rhBMP-2/ACS compared to control. Vertical bone gain averaged (+/- SD) 4.7 +/- 0.3 and 4.8 +/- 0.1 mm, and new bone area 10.3 +/- 2.0 and 8.0 +/- 2.5 mm2 at turned and surface-etched dental implants, respectively. Corresponding values for the control were 1.8 +/- 2.0 and 1.3 +/- 1.3 mm, and 1.8 +/- 1.3 and 1.2 +/- 0.6 mm2. Bone-implant contact in rhBMP-2-induced bone averaged 6.4 +/- 1.4% and 9.6 +/- 7.5% for turned and surface-etched dental implants, respectively (P=0.399). Corresponding values for the control were 14.6 +/- 19.4% and 23.7 +/- 9.7% (P=0.473). Bone-implant contact in resident bone ranged between 43% and 58% without significant differences between dental implant surfaces. CONCLUSIONS: rhBMP-2/ACS significantly enhances GBR at turned and surface-etched dental implants. The dental implant surface technology does not appear to substantially influence bone formation.

Absorbable Implants↗
PubMed2004

Effect of recombinant human bone morphogenetic protein-12 (rhBMP-12) on regeneration of periodontal attachment following tooth replantation in dogs.

OBJECTIVES: Subcutaneous and intramuscular implants of bone morphogenetic protein-12 (BMP-12) have been shown to induce formation of tendon and ligament tissue. BMP-12 induced a new attachment with a distinct fibrocartilaginous zone at the tendon-bone interface in the rat tendon-bone attachment model. Surgical controls showed poor healing and failure to reform the appropriate tendon-bone attachment morphologically. Application of recombinant human BMP-12 (rhBMP-12) to periodontal defects suggests that rhBMP-12 has the potential to support regeneration of the periodontal ligament (PDL). The objective of this pilot study was to evaluate this effect of rhBMP-12 in a tooth replantation model. METHODS: Six, young adult, male Hound Labrador mongrel dogs were used. Maxillary and/or mandibular incisor and premolar teeth were extracted and the PDL was either left "intact" or removed by root planing. rhBMP-12 (1.0 mg/ml) or a buffer control was topically applied to teeth with "intact" PDL in contralateral jaw quadrants in each of 3 animals. The teeth were immersed in 1.0 ml of the rhBMP-12 or the buffer solution for 10 min and then replanted. The remaining three animals received rhBMP-12 (1.0 mg/ml) and the buffer control in a similar fashion applied to teeth instrumented to remove the PDL and cementum, and surface demineralized with citric acid. The animals were euthanized at 8 weeks postsurgery and block sections were collected and processed for histopathologic analysis. RESULTS: No dramatic differences were found between teeth receiving topical rhBMP-12 and the buffer control. Application of rhBMP-12 did not have an apparent effect on new cementum and PDL formation in the tooth replantation model. Moreover, application of rhBMP-12 did not increase nor did it decrease the apparent presence and extent of ankylosis along the root surface compared to the control. CONCLUSIONS: The observations from this study do not support the use of topical rhBMP-12 to support the reestablishment of the PDL including regeneration of cementum and functionally oriented fibers, and to prevent ankylosis and root resorption following replantation of teeth.

Animals↗
PubMed2004

Periodontal repair in dogs: effect of recombinant human bone morphogenetic protein-12 (rhBMP-12) on regeneration of alveolar bone and periodontal attachment.

OBJECTIVES: Recombinant human bone morphogenetic protein-2 (rhBMP-2) has been shown to stimulate alveolar bone and cementum formation in periodontal defects but not a functionally oriented periodontal ligament (PDL). Subcutaneous and intramuscular implants of BMP-12 have been shown to induce tendon formation and ligament-like tissue. The objective of this study was to evaluate rhBMP-12 for periodontal regeneration, in particular PDL formation. METHODS: Six young adult Hound Labrador mongrel dogs were used. Routine supraalveolar periodontal defects were created around the mandibular premolar teeth. Three animals received rhBMP-12(0.04 mg/ml) in an absorbable collagen sponge (ACS) carrier vs. rhBMP-12(0.2 mg/mL)/ACS in contralateral defects. Three animals received rhBMP-12(1.0 mg/ml)/ACS vs. rhBMP-2(0.2 mg/ml)/ACS (total implant volume/defect approximately 1 ml). The animals were euthanized 8 weeks postsurgery and block biopsies were processed for histometric analysis. RESULTS: Bone regeneration appeared increased in sites receiving rhBMP-2/ACS compared to sites receiving rhBMP-12/ACS. Cementum regeneration was similar comparing sites implanted with rhBMP-2/ACS to sites implanted with rhBMP-12/ACS. In contrast, sites receiving rhBMP-12/ACS exhibited a functionally oriented PDL bridging the gap between newly formed bone and cementum whereas this was a rare observation in sites receiving rhBMP-2/ACS. Ankylosis appeared increased in sites receiving rhBMP-2/ACS compared to those receiving rhBMP-12/ACS. CONCLUSIONS: The outcomes of this study suggest that rhBMP-12 may have significant effects on regeneration of the PDL. Additional preclinical evaluation is needed to confirm these initial observations prior to clinical application.

Alveolar Bone Loss↗
PubMed2004

Periodontal repair in dogs: evaluation of a bioresorbable calcium phosphate cement (Ceredex) as a carrier for rhBMP-2.

BACKGROUND: Recombinant human bone morphogenetic protein-2 (rhBMP-2) has been shown to induce clinically relevant bone formation for orthopedic, craniofacial, and oral indications. It appears critical, in particular for onlay indications, that the associated carrier technology exhibits structural integrity to offset compressive forces in support of rhBMP-2-induced bone formation. The objective of this study was to evaluate a calcium phosphate (CP) cement, Ceredex, as a candidate carrier for rhBMP-2 in a defect model with limited osteogenic potential. MATERIALS: Bilateral, critical size, 6-mm, supra-alveolar, periodontal defects were created in six, adult, male, Hound Labrador mongrels. Three animals received rhBMP-2/Ceredex (rhBMP-2 at 0.20 and 0.40 mg/ml) in contralateral defect sites (implant volume/defect approximately 1 ml). One defect site in each of the three remaining animals received Ceredex without rhBMP-2 (control). The animals were euthanized at 12 weeks postsurgery for histologic and histometric analysis. RESULTS: Mean induced bone height exceeded 80% of the defect height for supra-alveolar periodontal defects receiving rhBMP-2/Ceredex without major differences between rhBMP-2 concentrations compared with approximately 40% for the control. The newly formed bone, a mixture of lamellar and woven bone in fibrovascular tissue, circumscribed relatively large portions of the residual Ceredex biomaterial. Inflammatory lesions were associated with limited bone formation in some sites. From a periodontal perspective, sites receiving rhBMP-2/Ceredex exhibited increased cementum formation compared with control, but without a functionally oriented periodontal ligament, and increased ankylosis and root resorption. Control sites exhibited early wound failure and exposure, loss of the Ceredex biomaterial, and limited bone formation. CONCLUSIONS: The Ceredex CP cement appears a potentially promising carrier technology for rhBMP-2 onlay indications. However, a slow resorption rate may prevent its wider use. This study does not support use of the rhBMP-2/Ceredex combination for periodontal indications.

Absorbable Implants↗
PubMed2004

Recombinant human bone morphogenetic protein-2 delivered in an injectable calcium phosphate paste accelerates osteotomy-site healing in a nonhuman primate model.

BACKGROUND: In recent clinical trials demonstrating the efficacy of recombinant human bone morphogenetic protein-2 (rhBMP-2) for the acceleration of bone-healing, investigators used carriers requiring open surgery for administration. In this study, we used a nonhuman primate fibular osteotomy model to evaluate injectable rhBMP-2/carrier formulations that can be administered in closed fractures. METHODS: The fibular osteotomy model was first characterized by evaluating surgically harvested fibular segments containing untreated osteotomy sites (controls) from seventy adult male Cynomolgus monkeys at eight weeks (twenty-four monkeys), ten weeks (thirty-four), twelve weeks (six), and fourteen weeks (six). Fibular segments, from twenty-four animals, in which an osteotomy had not been performed served as normal controls (intact). The contralateral limb of twenty-four of the animals was then used to evaluate the effect of rhBMP-2 administered, three hours after the osteotomy, in eight carrier formulations (buffer, calcium phosphate paste, and hyaluronan gel, hyaluronan paste, and gelatin foam formulated with and without tricalcium phosphate granules). Each carrier was used in three monkeys. At ten weeks, the fibulae with the treated osteotomy sites were harvested and were compared with the contralateral, untreated osteotomized fibulae (paired control). The most promising carrier, calcium phosphate paste (alpha bone substitute material, or alpha-BSM), was then evaluated in eleven additional animals. The outcomes included the findings on radiographs made weekly until the time of fibular harvest, the callus area, the biomechanical properties, and the histologic findings. RESULTS: Radiographic and histologic studies confirmed complete bridging of the control osteotomy sites in most animals by fourteen weeks. The mean torsional stiffness and maximum torque of the control osteotomy sites were 42.7% and 53.7%, 55.2% and 60.4%, 66.7% and 66.4% of the mean torsional stiffness and maximum torque of the intact fibulae at eight, ten, and twelve weeks, respectively, but they were not substantially different from the mean torsional stiffness and maximum torque of the intact fibulae at fourteen weeks (82.3% and 79.8%). In the carrier screening study, outcome measures of healing were more consistently enhanced in the rhBMP-2/alpha-BSM-treated osteotomy sites. In the confirmatory study, the mean callus area, torsional stiffness, and maximum torque were 86%, 72%, and 68% greater in the rhBMP-2/alpha-BSM-treated osteotomy sites than in the paired-control osteotomy sites at ten weeks (p < 0.001). The torsional stiffness and maximum torque in the rhBMP-2/alpha-BSM-treated osteotomy sites were equal to those in the intact fibulae, whereas those parameters in the paired-control osteotomy sites were only 55% and 58%, respectively, of the torsional stiffness and maximum torque of the intact fibulae. Histologic analysis confirmed complete osseous bridging of the rhBMP-2/alpha-BSM-treated osteotomy sites but incomplete bridging of the paired-control osteotomy sites at ten weeks. CONCLUSIONS: A single percutaneous injection of rhBMP-2/alpha-BSM accelerates the healing of fibular osteotomy sites in nonhuman primates by approximately 40% compared with the healing of untreated osteotomy sites.

Animals↗
PubMed2003

BMP-2-induced Osterix expression is mediated by Dlx5 but is independent of Runx2.

BMP-2 stimulates the expression of three osteogenic master transcription factors: Runx2, Dlx5, and Osterix (Osx). However, the hierarchical regulatory relationships among them are not yet clearly understood. Osx was commonly stimulated in osteogenic and non-osteogenic cells in response to BMP-signaling, as Dlx5 was in our previous report. A cycloheximide experiment indicated that Osx expression by BMP-2 requires new protein synthesis. Even if Osx has been suggested as a downstream target of Runx2, the results of this study indicated that Osx expression was still induced by BMP-2 treatment in Runx2 null cells, but not induced by Runx2 overexpression in myogenic C2C12 cells. Instead, Osx expression by BMP-2 was completely abrogated by the antisense blocking of Dlx5. Depending upon the coincident expression pattern of Osx and Dlx5, and the blocking of Osx expression by the antisense Dlx5, BMP-2-induced Osx expression is mainly mediated not by Runx2, but by Dlx5.

Animals↗
PubMed2003

BMP-2-induced Runx2 expression is mediated by Dlx5, and TGF-beta 1 opposes the BMP-2-induced osteoblast differentiation by suppression of Dlx5 expression.

Intramuscular injection of BMP-2 induces ectopic bone formation in vivo. Similarly, BMP-2 treatment blocks myogenic differentiation and induces osteoblastic transdifferentiation of premyoblastic C2C12 cells. Previous reports suggested that BMP-2-stimulated Runx2 expression could play a pivotal role in transdifferentiation. However, increased Runx2 expression by TGF-beta 1 did not support osteoblast differentiation in vitro. These results indicate that the induction of Runx2 is not sufficient to explain the BMP-induced transdifferentiation. We found that Dlx5 is specifically expressed in osteogenic cells, and is specifically induced by BMP-2 or -4 signaling but not by other osteotrophic signals or other TGF-beta superfamily members. Cycloheximide treatment indicated that Dlx5 was immediately induced by BMP signaling, while Runx2 required de novo protein synthesis. In addition, blocking or overexpressing each transcription factor indicated that Dlx5 is an indispensable mediator of BMP-2-induced Runx2 expression but is not involved in TGF-beta 1-induced Runx2 expression. Moreover, TGF-beta 1 opposed BMP-2-induced osteogenic transdifferentiation through Dlx5 suppression by de novo induction of AP-1. Taken together, these results indicate that Dlx5 is an indispensable regulator of BMP-2-induced osteoblast differentiation as well as the counteraction point of the opposing TGF-beta 1 action.

Alkaline Phosphatase↗
PubMed2003

Long-term functional loading of dental implants in rhBMP-2 induced bone. A histologic study in the canine ridge augmentation model.

Osseointegration [direct bone-implant contact (BIC)] is a primary goal following installation of endosseous dental implants. Such bone contact provides stability for the dental implant over time. The objective of this study was to evaluate bone formation and BIC at long-term, functionally loaded, endosseous dental implants placed into bone induced by recombinant human bone morphogenetic protein-2 (rhBMP-2) in an absorbable collagen sponge (ACS) carrier. Mandibular, saddle-type, alveolar ridge defects (approximately 15 x 10 x 10 mm), two per jaw quadrant, were surgically induced in each of six young adult American fox hounds. The defects were immediately implanted with rhBMP-2/ACS. Two defects per animal additionally received a nonresorbable expanded polytetrafluoroethylene (ePTFE) membrane or a bioresorbable polyglycolide fiber membrane. Healing was allowed to progress for 3 months, when the ePTFE membrane was removed, and machined, threaded, titanium dental implants were installed into the rhBMP-2/ACS induced bone and into the adjacent resident bone. At 4 months of osseointegration, the implants were exposed to receive abutments and prosthetic treatment (two- or three-unit bridges). Some implants were removed for histologic analysis. The remainder of implants were exposed to functional loading for 12 months at which time the animals were killed for histometric analysis. One animal died prematurely due to kidney failure unrelated to the experimental protocol and was not included in the analysis. The 12-month block sections from a second animal were lost in the histological processing. Four sites receiving rhBMP-2/ACS and ePTFE or resorbable membranes experienced wound failure and membrane exposure, and subsequently exhibited limited bone formation. Defects without wound failure filled to contour with the adjacent alveolar bone. The newly formed bone exhibited features of the resident bone with a re-established cortex; however, it commonly included radiolucent areas that resolved over time. Dental implants block biopsied at 4 months exhibited limited, if any, crestal resorption, whereas those exposed to functional loading for 12 months exhibited some crestal resorption. Implants biopsied at 4 months exhibited a mean (+/- SD) BIC of 40.6 +/- 8.2% in rhBMP-2/ACS induced bone vs. 52.7 +/- 11.4% in resident bone. Dental implants exposed to 12 months of functional loading exhibited a mean BIC of 51.7 +/- 7.1% in rhBMP-2/ACS induced bone vs. 74.7 +/- 7.0% in resident bone. There were no significant differences between dental implants placed into rhBMP-2/ACS induced bone and resident bone for any parameter at any observation interval. In conclusion, rhBMP-2/ACS-induced bone allows installation, osseointegration, and long-term functional loading of machined, threaded, titanium dental implants in dogs.

Alveolar Bone Loss↗