PubMed Health⌕ Search

Biomedical subjects

John R P Webster

Publications and source records attributed to John R P Webster.

11 recordsLinked to original sources
PubMed2006

Structural studies of the phase, aggregation and surface behaviour of 1-alkyl-3-methylimidazolium halide + water mixtures.

The surface, phase and aggregation behaviour of mixtures of 1-alkyl-3-methylimidazolium halide, [C(n)mim]X, where n is the alkyl chain length, with water has been explored using a variety of methods. Critical micelle concentrations (cmc) and micelle structures have been determined for aqueous [C(n)mim]Br solutions for n=2, 4, 6, 8, and 10. Small-angle neutron scattering (SANS) measurements reveal that for the n=8 and 10 systems, at concentrations just above the cmc, small near-spherical aggregates exist, which, after initial growth, possess core radii (aggregation numbers) at intermediate concentrations of 10.5+/-0.5 Angstrom (22+/-2) and 13.2+/-0.5 Angstrom (40+/-3), respectively, for n=8 and n=10. Towards higher concentrations, the aggregates appear to grow, with the aggregates in the [C(10)mim]Br system becoming increasingly elongated (prolate) with increasing concentration. No evident aggregates are formed in the systems with n=2 and 4. In the n=6 system, it appears that oblate aggregates with radius approximately 9 Angstrom form at the cmc and that the radius increases with increasing concentration. For longer alkyl chain lengths, at high concentrations lyotropic mesophases form in some systems. The mesophase region for the [C(8)mim]Cl system has been explored across the composition range using X-ray diffraction and (2)H NMR spectroscopy. Both techniques suggest that a major hexagonal phase with lattice parameter of 29.5+/-0.5 Angstrom coexists with a minor lamellar phase (23.5+/-0.3 Angstrom) or possibly a second hexagonal phase (27.1+/-0.4 Angstrom). The area per adsorbed molecule at the surface of [C(8)mim]Br solutions has been measured as a function of concentration using neutron reflectometry. A minimum in the area per molecule behaviour is coincident with a minimum identified in the surface tension isotherm occurring close to the cmc. The data suggest depletion of [C(8)mim]Br from the surface region occurs at concentrations immediately above the cmc.

Journal Article↗
PubMed2006

Fluorosurfactants at structural extremes: adsorption and aggregation.

Fluorosurfactants with several structural modifications have been synthesized, and the air/water interface and bulk aggregation properties investigated. The compounds were fluorinated ethylene oxide (EO) nonionics where the number and position of the hydrophilic group(s) has been radically altered to generate linear, bolaform, and Y-shaped analogues. A noticeable structure-interfacial packing relationship was observed via both tensiometric measurements and neutron reflection studies: the limiting molecular areas, a(cmc), and surface excesses, gamma(cmc), are strongly dependent on the number and position of the EO headgroups. Differing bulk aqueous properties were also observed. Small-angle neutron scattering shows an evolution of micelle structure from cylindrical to disk-like aggregates on changing from Y-shaped to bolaform molecular structure.

Journal Article↗
PubMed2005

Neutron reflection from the liquid-liquid interface: adsorption of hexadecylphosphorylcholine to the hexadecane-aqueous solution interface.

Adsorption of water-soluble, zwitterionic n-hexadecylphosphorylcholine (C(16)PC) amphiphiles has been examined at the hexadecane-aqueous solution interface using neutron reflectivity (NR) and interfacial tension measurements. The results of both methods indicate that the limiting area per surfactant molecule at the interface at the critical micelle concentration (cmc) is 40 +/- 5 Angstroms(2). In the NR measurements, two isotopic contrasts have been employed to determine the adsorption isotherm and to explore the structure of the interfacial region. Single-layer model fitting to both isotopic contrasts was only possible for the single sub-cmc concentration studied, where a film thickness of 60 +/- 5 Angstroms was obtained; consistent single-layer model fits to both contrasts for concentrations greater than the cmc were not possible, leading to the requirement of a two-layer model with an overall film thickness close to 60 +/- 2 Angstroms. This film thickness is appreciably greater than the fully extended C(16)PC molecular length and cannot be explained purely in terms of thermal broadening. A further result is that the reflectivity data indicate that, as the C(16)PC concentration increases, the amount of water on the hexadecane side of the interfacial region increases, in contrast to intuitive expectation. These findings are interpreted by conjecturing a structural model in which a trilayer of C(16)PC molecules is formed at the interface with the water concentrated in the region occupied by the headgroups.

Journal Article↗
PubMed2005

Width of the hexadecane-water interface: a discrepancy resolved.

An existing discrepancy in the determined values of the width of the hexadecane-water interface as determined from X-ray reflection (XR) and recent neutron reflection (NR) measurements has been resolved. The NR-determined width reported here is 6.0 +/- 1.0 Angstroms, which compares extremely well with the XR-determined value of 6.0 +/- 0.2 Angstroms. The origin of the discrepancy has been attributed to the thermal history of the interface rather than sample purity or other technique-dependent reasons.

Neutrons↗
PubMed2005

Neutron reflectivity studies of critical adsorption: behavior of the surface scaling function.

Neutron reflectometry has been employed to examine the nature of the critical adsorption surface scaling function for a near-critical mixture of hexane-d14+perfluorohexane adsorbing to a solid substrate from the liquid one-phase region. The analysis method of Dietrich and Schack has been applied to examine the nature of the power-law part of the critical adsorption surface scaling function, which has been found to behave as m(z) approximately P0z(-mu) as the critical point is approached. Values of mu = 0.514+/-0.018 and P0 = 0.90+/-0.04 have been obtained. These values are consistent with theoretical expectations (mu(th) = 0.516+/-0.004; P0(th) = 0.94+/-0.05), the value determined from Monte Carlo simulations (P(MC)0 = 0.866, and other experimental determinations (P(ex)0 = 0.955=/-0.08).

Journal Article↗
PubMed2005

Evaluating the influence of deposition conditions on solvation of reactive conducting polymers with neutron reflectivity.

We describe in situ neutron reflectivity (NR) and RAIRS studies of the chemical modification of films of a polypyrrole-based conducting polymer derived from the pentafluorophenyl ester of poly(pyrrole-N-propanoic acid) (PFP) electrodeposited on electrode surfaces. We explore the role of the solvent in controlling the rate of reaction with solution-based nucleophiles (amines, which react with the ester to form amides). By varying the identity of the solvent (water vs acetonitrile) and the neutron contrast (deuteration), we find that both the identity of the solvent and its population within the film are paramount in determining chemical reactivity and electroactivity. IR signatures allow monitoring of the reaction of solution-based amine-tagged species such as amino-terminated poly(propylene glycol), ferrocene ethylamine, and lysine with film-based ester functionalities: the carbonyl bands show ester/amide interconversion and some hydrolysis to acid. Time-dependent spectral analysis shows marked variations in reaction rate with (i) (co-)polymer composition (replacement of some fluorinated ester-functionalized pyrrole with unfunctionalized pyrrole), (ii) the solvent to which the polymer film is exposed, and (iii) the rate of polymer deposition. NR data provide solvent profiles as a function of distance perpendicular to the interface, the variations of which provide an explanation for film reactivity patterns. Homopolymer films are relatively hydrophobic, thus hindering reaction with species present in water solutions. Incorporating pyrrole groups raises the solvent population-dramatically for water-thereby facilitating entry and reaction of aqueous-based lysine. Changing film deposition rate yields films with different absolute levels of solvent and reactivity patterns that are dependent on the size of the reactant molecules: more rapid deposition of polymer gives films with a more open structure leading to a higher solvent content and thence increased reactivity. These results, supported by XPS and AFM data, allow assembly of composition-structure-reactivity correlations, in which the controlling feature is film solvation.

Electrochemistry↗
PubMed2005

Surface and aggregation behavior of aqueous solutions of Ru(II) metallosurfactants. 3. Effect of chain number and orientation on the structure of adsorbed films of [Ru(bipy)2(bipy')]Cl2 complexes.

The surface behavior of a range of surfactant [Ru(bipy)(2)(p,p'-dialkyl-2,2'-bipy)]Cl(2) complexes, which we express as Ru(q)(p)C(n) where n is the alkyl chain length, p refers to the substitution position on the bipyridine ligand (=4 or 5), and q (=1 or 2) is the number of substituted alkyl chains, has been examined using neutron reflectometry. The adsorption of the single-chain Ru(1)(4)C(19) and Ru(1)(5)C(19) surfactants is strongly time-dependent, taking in excess of 10 h to form an equilibrium film. It is suggested that the slow adsorption rate is related to the alkyl chain length rather than the low monomer concentration present in the solutions. At concentrations below the critical micelle concentration (cmc) of Ru(1)(4)C(19), the film of Ru(1)(5)C(19) is denser than that of Ru(1)(4)C(19) at comparable concentration, consistent with the mass densities of the bulk solids, whereas at concentrations close to and greater than this cmc the converse pertains. Close to the cmc, the adsorbed films possess an average area per molecule significantly less than the nominal headgroup area of the surfactants (approximately 30 angstroms(2) compared with approximately 100 angstroms(2)). This fact together with consideration of the thickness and density of the adsorbed films leads to the conjecture that surface aggregates may be the adsorbing units. The adsorption of the double-chain surfactant Ru(1)(p)C(19), in contrast to the behavior of the Ru(1)(p)C(19) surfactants, is weak and independent of time. This behavior is attributed to the alkyl chain orientation. The adsorption behavior of a racemic mixture of the Delta and Lambda isomers of Ru(2)(4)C(19) has been compared with that of the Delta isomer. It is found that the film of racemic material is more closely packed than that of the resolved complex.

Journal Article↗
PubMed2005

Structural studies of amphiphiles adsorbed at liquid-liquid interfaces using neutron reflectometry.

We report the application and refinement of a recently developed method for structural studies at a liquid liquid interface using neutron reflectometry. The technique involves the entrapment of a thin oil layer between a silicon substrate and an aqueous subphase. The thin oil film is prepared by spin-coating an oil film on to an oleophilically treated silicon substrate. During the reflectivity measurement the sample is maintained in a horizontal position, and the angle of incidence of the neutron beam is varied using a supermirror. Attenuation of neutron reflectivity at the lowest angle of incidence is used to determine the oil-layer thickness. We report information regarding the structure at the interface between hexadecane and a 0.1% w/v aqueous solution of the triblock copolymer Pluronic L64 with EO13PO30EO13 (EO = ethylene oxide; PO = propylene oxide) and the interface between hexadecane and a 3.7 mmol dm(-3) (approximately critical micelle concentration) aqueous solution of the cationic surfactant tetradecyltrimethylammonium bromide (C14TAB). For the C14TAB system, the reflectivity data unambiguously reveal the presence of a region highly concentrated in C14TAB on the oil side of the interface. For the Pluronic L64 system, the data suggest that the polymer adsorbs at the interface occupying both oil and water sides of the interface. Model scattering length density profiles that capture these features are presented and further models that better fit the data are discussed.

Journal Article↗
PubMed2004

Interfacial nano-structuring of designed peptides regulated by solution pH.

The in-situ conformations of peptide layers formed from the adsorption of two different synthetic 15-mer peptides at the hydrophilic silicon oxide/aqueous solution interface have been determined using neutron reflectivity (NR). The first peptide is based on the native sequence of a protein-binding domain within a heteromeric transcriptional activator, HAP2, identified from yeast Saccharomyces cerevisiae, with tyrosine (Y) present at the 1st, 8th and 15th amino acid positions, hence we denote this YYY15. Substitution of tryptophan (W) at the same locations gives WWW15. Both peptides have alpha-helical structure in phosphate buffer, as determined by circular dichroism (CD) spectra. D(2)O was used as solvent in the NR experiments to highlight structural heterogeneity across the hydrogenated peptide layers. At pH 7, YYY15 was found to form a weakly adsorbed interfacial monolayer. However, the mutant WWW15 showed strong interfacial adsorption, with the interfacial layer characterized by a middle hydrophobic sublayer of 7-8 A with lower scattering length density and two almost symmetrical hydrophilic outer sublayers of 6-8 A with higher scattering length density, suggesting the formation of a "sideways-on" helical conformation. An increase in pH to 9 resulted in the improved packing within the interfacial layer with similar structure. However, decrease in pH to 5 reduced the interfacial adsorption, mainly due to the enhanced solubility of the peptides associated with the protonation of arginine (R) and lysine (K) groups and the decreasing concentration of divalent HPO(4)(2-) in the phosphate buffer. Subsequent assessment of the reversibility of adsorption showed that once the peptide layers were formed they did not desorb. These interfacial structures may provide feasible routes to interfacial nano-templating.

Amino Acid Sequence↗
PubMed2003

Adsorption of beta-hairpin peptides on the surface of water: a neutron reflection study.

Neutron reflectivity has been used to determine the thickness and surface coverage of monolayers of two 14-residue beta-hairpin peptides adsorbed at the air/water interface. The peptides differed only in that one was labeled with a fluorophore, while the other was not. The neutron reflection measurements were mainly made in null reflecting water, NRW, containing 8.1% D(2)O. Under this isotopic contrast the water is invisible to neutrons and the specular signal was then only from the peptide layer. At the highest concentration of ca. 4 microg/mL studied, the area per peptide molecule (A) was found to be 230 +/- 10 and 210 +/- 10 A(2) for the peptides with and without a BODIPY-based fluorophore, respectively. The thickness of the peptide layers was about 10 A for a Gaussian distribution. With decreasing bulk peptide concentration, both surface excess and layer thickness showed a steady trend of decrease. While the neutron results clearly indicate structural changes within the peptide monolayers with increasing bulk concentration, the outstanding structural feature is the formation of rather uniform peptide layers, consistent with the structural characteristics typical of beta-strand peptide conformations. These structural features are well supported by the parallel measurements of the adsorbed layers in D(2)O. With this isotopic contrast the neutron reflectivity provides an estimate about the extent of immersion of the peptide layers into water. The results strongly suggest that the 14-mer peptide monolayers were fully afloat on the surface of water, with only the carboxy groups on Glu residues hydrated.

Adsorption↗