Biomedical subjects

Jon Våbenø

Publications and source records attributed to Jon Våbenø.

8 recordsLinked to original sources

PubMed2006

Development of a QSAR model for binding of tripeptides and tripeptidomimetics to the human intestinal di-/tripeptide transporter hPEPT1.

PURPOSE: The aim of this study was to develop a three-dimensional quantitative structure-activity relationship (QSAR) model for binding of tripeptides and tripeptidomimetics to hPEPT1 based on a series of 25 diverse tripeptides. METHODS: VolSurf descriptors were generated and correlated with binding affinities by multivariate data analysis. The affinities for hPEPT1 of the tripeptides and tripeptidomimetics were determined experimentally by use of Caco-2 cell monolayers. RESULTS: The Ki-values of the 25 tripeptides and tripeptidomimetics ranged from 0.15 to 25 mM and the structural diversity of the compounds was described by VolSurf descriptors. A QSAR model that correlated the VolSurf descriptors of the tripeptides with their experimental binding affinity for hPEPT1 was established. CONCLUSION: Structural information on tripeptide properties influencing the binding to hPEPT1 was extracted from the QSAR model. This information may contribute to the drug design process of tripeptides and tripeptidomimetics where hPEPT1 is targeted as an absorptive transporter for improvement of intestinal absorption. To our knowledge, this is the first time a correlation between VolSurf descriptors and binding affinities for hPEPT1 has been reported.

Caco-2 Cells↗

PubMed2006

A minimalistic 3D pharmacophore model for cyclopentapeptide CXCR4 antagonists.

Because of its involvement in HIV entry, the chemokine receptor CXCR4 is an attractive target for antiretroviral drugs. Despite the large number of CXCR4 inhibitors studied, the 3D pharmacophore for binding to CXCR4 remains elusive, mainly as a result of conformational flexibility inherent in the identified ligands. In the present study, an exhaustive systematic exploration of the conformational space for a series of analogs of FC131, a cyclopentapeptide CXCR4 antagonist, has been performed. By comparing the resulting low-energy conformations using different sets of atoms, specific conformational features common only to the high/medium affinity compounds were identified. These features included the spatial arrangement of three pharmacophoric side chains as well as the orientation of a specific backbone amide bond. Together these features represent a minimalistic 3D pharmacophore model for binding of the cyclopentapeptide antagonists to CXCR4. The model enables rationalization of the experimental affinity data for this class of compounds as well as for the peptidomimetic KRH-1636.

Anti-HIV Agents↗

PubMed2006

Insight into the binding mode for cyclopentapeptide antagonists of the CXCR4 receptor.

The finding that the chemokine receptor CXCR4 is involved in T-cell HIV entry has encouraged the development of antiretroviral drugs targeting this receptor. Additional evidence that CXCR4 plays a crucial role in both angiogenesis and metastasis provides further motivation for the development of a CXCR4 inhibitor for therapeutic applications in oncology. To facilitate the design of such ligands, we have investigated the possible binding modes for cyclopentapeptide CXCR4 antagonists by docking 11 high/medium affinity cyclopentapeptides to a developed three-dimensional model of the CXCR4 G-protein-coupled receptor's transmembrane region. These ligands, expected to bind in the same mode to the receptor, were docked in the previously deduced receptor-bound conformation [Våbenøet al., in press; doi 10.1002/bip.20508]. Ligand-receptor complexes were generated using an automated docking procedure that allowed ligand flexibility. By comparing the resulting ligand poses, only two binding modes common for all 11 compounds were identified. Inspection of these two ligand-receptor complexes identified several CXCR4 contact residues shown by mutation to be interaction sites for ligands and important for HIV gp120 binding. Thus, the results provide further insight into the mechanism by which these cyclopentapeptides block HIV entry as well as a basis for rational design of CXCR4 mutants to map potential contacts with small peptide ligands.

Amino Acid Sequence↗

PubMed2005

Conformational restrictions in ligand binding to the human intestinal di-/tripeptide transporter: implications for design of hPEPT1 targeted prodrugs.

The aim of the present study was to develop a computational method aiding the design of dipeptidomimetic pro-moieties targeting the human intestinal di-/tripeptide transporter hPEPT1. First, the conformation in which substrates bind to hPEPT1 (the bioactive conformation) was identified by conformational analysis and 2D dihedral driving analysis of 15 hPEPT1 substrates, which suggested that psi(1) approximately 165 degrees , omega(1) approximately 180 degrees , and phi(2) approximately 280 degrees were descriptive of the bioactive conformation. Subsequently, the conformational energy required to change the peptide backbone conformation (DeltaE(bbone)) from the global energy minimum conformation to the identified bioactive conformation was calculated for 20 hPEPT1 targeted model prodrugs with known K(i) values. Quantitatively, an inverse linear relationship (r(2)=0.81, q(2)=0.80) was obtained between DeltaE(bbone) and log1/K(i), showing that DeltaE(bbone) contributes significantly to the experimentally observed affinity for hPEPT1 ligands. Qualitatively, the results revealed that compounds classified as high affinity ligands (K(i)<0.5 mM) all have a calculated DeltaE(bbone)<1 kcal/mol, whereas medium and low-affinity compounds (0.5 mM<K(i)<15 mM) have DeltaE(bbone) values in the range 1-3 kcal/mol. The findings also shed new light on the basis for the experimentally observed stereoselectivity of hPEPT1.

Amination↗

PubMed2004

Dipeptidomimetic ketomethylene isosteres as pro-moieties for drug transport via the human intestinal di-/tripeptide transporter hPEPT1: design, synthesis, stability, and biological investigations.

Five dipeptidomimetic-based model prodrugs containing ketomethylene amide bond replacements were synthesized from readily available alpha,beta-unsaturated gamma-ketoesters. The model drug (BnOH) was attached to the C-terminus or to one of the side chain positions of the dipeptidomimetic. The stability, the affinity for the di-/tripeptide transporter hPEPT1, and the transepithelial transport properties of the model prodrugs were investigated. ValPsi[COCH(2)]Asp(OBn) was the compound with highest chemical stability in buffers at pH 6.0 and 7.4, with half-lives of 190 and 43 h, respectively. All five compounds showed high affinity for hPEPT1 (K(i) values < 1 mM), and PhePsi[COCH(2)]Asp(OBn) and ValPsi[COCH(2)]Asp(OBn) had the highest affinities with K(i) values of 68 and 19 microM, respectively. An hPEPT1-mediated transport component was demonstrated for the transepithelial transport of three compounds, a finding that was corroborated by hPEPT1-mediated intracellular uptake. The results indicate that the stabilized Phe-Asp and Val-Asp derivatives are promising pro-moieties in a prodrug approach targeting hPEPT1.

Biological Transport↗

PubMed2004

Phe-Gly dipeptidomimetics designed for the di-/tripeptide transporters PEPT1 and PEPT2: synthesis and biological investigations.

A series of five Phe-Gly dipeptidomimetics containing different amide bond replacements have been synthesized in a facile way from the readily available unsaturated ketoester 1, and their affinities for the di-/tripeptide transporters hPEPT1 (Caco-2 cells) and rPEPT2 (SKPT cells) were tested. The compounds contained the amide bond isosteres ketomethylene (2a), (R)- and (S)-hydroxyethylidene (3a and 4a), and (R)- and (S)-hydroxyethylene (5a and 6a) to provide information on the conformational and stereochemical requirements for hPEPT1 and rPEPT2 affinity. The affinity studies showed that for rPEPT2 there is no significant difference in affinity between the ketomethylene isostere 2a and the natural substrate Phe-Gly (K(i) values of 18.8 and 14.6 microM, respectively). Also the affinities for hPEPT1 are in the same range (K(i) values of 0.40 and 0.20 mM, respectively). This corroborates earlier findings that the amide bond as such is not essential for binding to PEPTX, but the results also reveal possible differences in the binding of ketomethylene isosteres to hPEPT1 and rPEPT2. The trans-hydroxyethylidene and hydroxyethylene isosteres proved to be poor substrates for PEPTX. These results provide new information about the importance of flexibility and of the stereochemistry at the C(4)-position for this class of compounds. Furthermore, the intracellular uptake of 2a-4a in Caco-2 cells was investigated, showing a 3-fold reduction of the uptake of 2a in the presence of the competetive inhibitor Gly-Pro, indicating contribution from an active transport component. No active uptake of 3a and 4a was observed. Transepithelial transport studies also indicated active transport of 2a across Caco-2 monolayers.

Animals↗

PubMed2003

Structure-activity relationship for alkylating dipeptide nitrogen mustard derivatives.

The strategy of using small peptides for effective targeting of tumor cells in chemotherapy has proven beneficial. Recently we showed that J1 (L-melphalanyl-p-L-fluorophenylalanine ethyl ester), an alkylating nitrogen mustard-containing dipeptide, exhibited strong cytotoxic activity in fresh human tumor samples in addition to rapid and pronounced inhibition of macromolecular syntheses and cellular respiration in the human tumor lymphoma cell line U-937 GTB. In this study, an additional series of 17 nitrogen mustard-containing dipeptides has been synthesized and analyzed for cytotoxic activity in a panel of 10 human tumor cell lines. The results were compared to the single amino acid mustard derivative melphalan and its ethyl and isopropyl esters. Also P2 (L-prolyl-m-L-sarcolysyl-p-L-fluorophenylalanine ethyl ester), a tripeptide that previously has shown impressive effects in human tumor cells, was used as reference. The tested compounds displayed various activities in the different cell lines but also showed a high correlation, indicating a similar mechanism of action. Factors like amino acid composition, amino acid sequence, modifications of the C- and N-termini, and to a minor extent the lipophilicity of the dipeptide derivatives appear to influence the in vitro activity. The results indicate that the activity of these compounds not only relies on their chemical reactivity, but also on active biological interactions such as transport across membranes and/or enzymatic liberation of reactive molecular entities.

Alkylation↗

PubMed2002

Diastereoselective reduction of a chiral N-Boc-protected delta-amino-alpha,beta-unsaturated gamma-keto ester Phe-Gly dipeptidomimetic.

The readily available N-Boc-protected delta-amino alpha,beta-unsaturated gamma-keto ester 1 was diastereoselectively reduced to the corresponding alcohols 2 and 3, using boron- and aluminum-based reducing reagents. Reduction reactions were successful and resulted in anti/syn ratios of alcohols of >95:5 (80% yield), using LiAlH(O-t-Bu)(3) in EtOH at -78 degrees C under chelation control, and 5:95 (98% yield), using NB-Enantride in THF at -78 degrees C under Felkin-Anh control.

Aluminum↗