PubMed Health⌕ Search

Biomedical subjects

Jong-Dal Rhee

Publications and source records attributed to Jong-Dal Rhee.

12 recordsLinked to original sources

Retarded dissolution of ibuprofen in gelatin microcapsule by cross-linking with glutaradehyde.

Ibuprofen-loaded gelatin microcapsule, a solid form of microcapsules simultaneously containing ethanol and ibuprofen in water-soluble gelatin shell was previously reported to improve the dissolution of drug. In this study, to retard the initial high dissolution of ibuprofen from gelatin microcapsule, the ibuprofen-loaded cross-linked gelatin microcapsule was prepared by treating an ibuprofen-loaded gelatin microcapsule with glutaraldehyde and its dissolution was evaluated compared to ibuprofen powder and gelatin microcapsule. The ibuprofen-loaded cross-linked microcapsule treated with glutaraldehyde for 10 and 60 sec gave significantly higher dissolution rates than did ibuprofen powder. Furthermore, the dissolution rate of ibuprofen from the cross-linked microcapsule treated for 10 sec was similar to that from gelatin microcapsule. However, the dissolution rate of ibuprofen from the cross-linked microcapsule treated for 60 sec decreased significantly compared to gelatin microcapsule, suggesting that the treatment of gelatin microcapsule with glutaraldehyde for 60 sec could cross-link the gelatin microcapsule. Furthermore, the cross-linking of gelatin microcapsule markedly retarded the release rate of ibuprofen in pH 1.2 simulated gastric fluid compared to gelatin microcapsule. However, the cross-linking of gelatin microcapsule with glutaraldehyde hardly changed the size of gelatin microcapsules, ethanol and ibuprofen contents encapsulated in gelatin microcapsule. Thus, the ibuprofen-loaded cross-linked gelatin microcapsule could retard the initial high dissolution of poorly water-soluble ibuprofen.

Anti-Inflammatory Agents, Non-Steroidal↗

Trials of novel 13C-urea-containing capsule for more economic and sensitive diagnosis of Helicobacter pylori infection in human subjects.

To develop a 13C-urea-containing capsule for more economic and sensitive diagnosis of Helicobacter pylori infection, the 13C-urea-containing capsules were prepared with various additives such as polyethylene glycol, microcrystalline cellulose, sodium lauryl sulfate and citric acid. Their dissolution test and 13C-urea Breath Test in human volunteers were then performed. Polyethylene glycol increased the initial dissolution rates of urea and difference delta 13C values from 13C-urea, while microcrystalline cellulose and sodium lauryl sulfate decreased them. Irrespective of addition of citric acid, the compositions with polyethylene glycol showed higher values from 13C-urea compared to a commercial 76 mg 13C-urea-containing capsule due to higher initial dissolution rate. The capsules with 38 mg 13C-urea and 1.9 mg polyethylene glycol, which showed higher Helicobacter pylori-positive value of about 8 per thousand at 10 min, improved the sensitivity of 13C-urea in human volunteers. Thus, the 13C-urea-containing capsule with polyethylene glycol would be a more economical and sensitive preparation for diagnosis of Helicobacter pylori infection.

Adult↗

Trials of clear aceclofenac-loaded soft capsules with accelerated oral absorption in human subjects.

To develop an effective oral drug delivery system with accelerated absorption in human subjects for a poorly water-soluble acelofenac, five aceclofenac-loaded soft capsule preparations containing various ratios of different solubilizers were prepared and their dissolution tests were carried out. Among five preparations tested, a preparation with ethanolamine was selected as a formula of aceclofenac soft capsule (Korea United Pharm. Co. Ltd., Clanza S, since it was clear in appearance and showed the fastest dissolution rate due to the solubility-enhancing effect of aceclofenac. To evaluate and compare the pharmacokinetics of acelofenac-loaded soft capsules with the conventional aceclofenac tablets (Dae-Woong Pharm. Co. Ltd., Airtal) in human subjects; 14 normal healthy male volunteers (age 20-25 years old) were divided into two groups and a randomized 2 x 2 cross-over study was performed. Following oral administration of one tablet or capsule, each containing 100mg of aceclofenac, blood samples were collected at the predetermined time intervals and the concentration of aceclofenac in plasma was determined by HPLC method using UV detector. The AUC, Cmax, MRT, t1/2 and Kel of aceclofenac delivered from soft capsule were not significantly different from those from aceclofenac-loaded conventional tablet. However, soft capsule gave significantly higher initial concentration and significantly faster Tmax of aceclofenac than did conventional tablet, suggesting that the soft capsule with ethanolamine showed the faster absorption of aceclofenac in human subjects. Thus, the clear aceclofenac-loaded soft capsule with ethanolamine was a more effective oral dosage form with fast absorption for poorly water-soluble aceclofenac.

Absorption↗

Physicochemical characterization and in vivo evaluation of poloxamer-based solid suppository containing diclofenac sodium in rats.

To develop a poloxamer-based solid suppository with poloxamer mixtures, the melting point of various formulations composed of poloxamer 124 (P 124) and poloxamer 188 (P 188) were investigated. The dissolution and pharmacokinetic study of diclofenac sodium delivered by the poloxamer-based suppository were performed. Furthermore, the identification test in the rectum and morphology test of rectal tissues were carried out after its rectal administration in rats. The poloxamer mixtures composed of P 124 and P 188 were homogeneous phases. Very small amounts of P 188 affected the melting point of poloxamer mixtures. In particular, the poloxamer mixture [P 124/P 188 (97/3%)] with the melting point of about 32 degrees C was a solid form at room temperature and instantly melted at physiological temperature. Very small amounts of P 188 hardly affected the dissolution rates of diclofenac sodium from the suppository. Dissolution mechanism analysis showed the dissolution of diclofenac sodium was proportional to the time. The poloxamer-based suppository gave significantly higher initial plasma concentrations and faster T(max) of diclofenac sodium than did conventional PEG-based suppository, indicating that the drug from poloxamer-based suppository could be absorbed faster than that from PEG-based one in rats. It retained in the rectum for at least 4 h and could not irritate or damage the rectal tissues of rats. Thus, the poloxamer-based solid suppository with P 124 and P 188 was a mucoadhesive, safe and effective rectal dosage form for diclofenac sodium.

Adhesives↗

Enhanced oral bioavailability of ibuprofen in rats by poloxamer gel using poloxamer 188 and menthol.

To improve the oral bioavailability of poorly water-soluble ibuprofen with poloxamer and menthol, the effects of menthol and poloxamer 188 on the aqueous solubility of ibuprofen were investigated. The dissolution and pharmacokinetic study of ibuprofen delivered by the ibuprofen-loaded preparations composed of poloxamer 188 and menthol were then performed. In the absence of poloxamer, the solubility of ibuprofen increased until the ratio of menthol to ibuprofen increased from 0:10 to 4:6 followed by an abrupt decrease in solubility above the ratio of 4:6, indicating that four parts menthol formed eutectic mixture with six parts ibuprofen. In the presence of poloxamer, the solutions with the same ratio of menthol to ibuprofen showed an abrupt increase in the solubility of ibuprofen. The poloxamer gel with menthol/ibuprofen ratio of 1:9 and higher than 15% poloxamer 188 showed the maximum solubility of ibuprofen, 1.2 mg/mL. The simultaneous addition of menthol and poloxamer 188 significantly improved the dissolution rates of ibuprofen from aqueous solution due to the ibuprofen solubility-improving effect of menthol in the presence of poloxamer. Furthermore, the ibuprofen-loaded preparation with menthol and poloxamer 188 gave significantly higher initial plasma concentrations, Cmax, and AUC of ibuprofen than did the preparation without menthol and poloxamer 188, indicating that the simultaneous addition of menthol and poloxamer 188 could improve the oral bioavailability of ibuprofen in rats. In modern pain management it is always desirable for the ibuprofen-loaded preparation with poloxamer 188 and menthol to show a rapid onset of action with a minimal phase of lag time to feel the decreased pain. From an industry point of view, it is more desirable for a formulation to be fast acting, easy to use, and cost effective. Thus, the ibuprofen-loaded preparation with poloxamer 188 and menthol was a more effective oral dosage form for poorly water-soluble ibuprofen.

Administration, Oral↗

Physicochemical characterization of rutaecarpine-loaded microemulsion system.

To develop an o/w microemulsion system containing poorly water-soluble rutaecarpine, the solubility of rutaecarpine in water, ethanol, various oils, and surfactants were investigated. Among the surfactants and oils tested, Tween 20/PEG 400 and castor oil were chosen as the surfactant system and oil phase of the microemulsion, as rutaecarpine was most soluble in them, respectively. Pseudoternary phase diagrams were constructed to obtain the concentration range of oil, surfactant, and cosurfactant for microemulsion formation, and the stability test of rutaecarpine delivered by microemulsion formation was then evaluated. Pseudoternary phase diagrams show that the areas of microemulsion appeared at those with 0-20% Smix (PEG 400/Tween80 = 60/40), 64-81% water, and 10-20% oil. The rutaecarpine (300 microg/g)-loaded microemulsion composed of 10.8% PEG 400, 7.2% Tween 80, 20% caster oil, and 72% water was physically and chemically stable for at least 6 months. Thus, the microemulsion system composed of castor oil, PEG 400, Tween 80, and water could be a stable dosage form for rutaecarpine.

Alkaloids↗

Enhanced rectal bioavailability of ibuprofen in rats by poloxamer 188 and menthol.

To improve the bioavailability of poorly water-soluble ibuprofen in the rectum with poloxamer and menthol, the effects of menthol and poloxamer 188 on the aqueous solubility of ibuprofen were investigated. The dissolution and pharmacokinetic study of ibuprofen delivered by the poloxamer gels composed of poloxamer 188 and menthol were then performed. In the absence of poloxamer, the solubility of ibuprofen increased until the ratio of menthol to ibuprofen increased from 0:10 to 4:6 followed by an abrupt decrease in solubility above the ratio of 4:6, indicating that four parts menthol formed eutectic mixture with six parts ibuprofen. In the presence of poloxamer, the solutions with the same ratio of menthol to ibuprofen showed abrupt increase in the solubility of ibuprofen. The poloxamer gel with menthol/ibuprofen ratio of 1:9 and higher than 15% poloxamer 188 showed the maximum solubility of ibuprofen, 1.2mg/ml. Menthol improved the dissolution rates of ibuprofen from poloxamer gels. Release mechanism showed that the release rate of ibuprofen from the poloxamer gels without menthol was independent of the time but the drug might be released from the poloxamer gels with menthol by Fickian diffusion. Furthermore, the poloxamer gel with menthol (poloxamer/menthol/ibuprofen (15%/0.25%/2.5%)) gave significantly higher initial plasma concentrations, C(max) and AUC of ibuprofen than did solid suppository, indicating that the drug from poloxamer gel could be more absorbed than that from solid one in rats. Thus, the poloxamer gel with poloxamer 188 and menthol was a more effective rectal dosage form for ibuprofen.

Administration, Rectal↗

Preparation of ibuprofen-loaded liquid suppository using eutectic mixture system with menthol.

To prepare an ibuprofen-loaded liquid suppository using eutectic mixture with menthol, the effects of menthol and poloxamer 188 (P 188) on the aqueous solubility of ibuprofen were investigated. The physicochemical properties such as gelation temperature, gel strength and bioadhesive force of various formulations composed of ibuprofen, menthol and P 188 were investigated. Then, the pharmacokinetic study of ibuprofen delivered by the liquid suppositories composed of P 188 and menthol were then performed. In the absence of P 188, the solubility of ibuprofen increased until the ratio of menthol to ibuprofen increased from 0:10 to 4:6 followed by an abrupt decrease in solubility above the ratio of 4:6, indicating that four parts of ibuprofen formed eutectic mixture with six parts of menthol. In the presence of P 188, the solutions with the same ratio showed abrupt increase in the solubility of ibuprofen. Furthermore, the solution with ratio of 4:6 showed more than 2.5- and 6-fold increase in the solubility of ibuprofen compared with that without additives and that without menthol, respectively. The poloxamer gel with menthol/ibuprofen ratio of 1:9 and higher than 15% poloxamer 188 showed the maximum solubility of ibuprofen, 1.2mg/ml. Ibuprofen increased the gelation temperature and weakened the gel strength and bioadhesive force of liquid suppositories. However, menthol did the opposite due to forming the eutectic mixture with ibuprofen. The ibuprofen-loaded liquid suppository [P 188/menthol/ibuprofen (15/0.25/2.5%)] with the maximum ibuprofen solubility of 1.2mg/ml was administered easily to the anus and to remain at the administered site without leakage after the dose. Furthermore, it gave significantly higher initial plasma concentrations, Cmax and AUC of ibuprofen than did solid suppository, indicating that the drug from poloxamer gel could be more absorbed than that from solid one in rats. Thus, the liquid suppository system with P 188 and menthol, a more convenient and effective rectal dosage form for ibuprofen will be expected to enhance the rectal bioavailability of ibuprofen.

Animals↗

Effect of sodium chloride on the release, absorption and safety of diclofenac sodium delivered by poloxamer gel.

Poloxamer solutions prepared with poloxamers and sodium chloride were previously reported to undergo a phase transition to bioadhesive gels at body temperature. For the development of a thermosensitive diclofenac sodium-loaded poloxamer gel, here we investigated the effect of sodium chloride on the release, safety and rectal absorption in rats of diclofenac sodium delivered by the poloxamer gels. P 188 delayed the release rates of diclofenac sodium from poloxamer gels. However, sodium chloride showed no significant effect on the release rates of diclofenac sodium from poloxamer gels. Release mechanism analysis showed the release of diclofenac sodium was proportional to the time. The initial plasma concentrations of diclofenac sodium in the rectal formulation [diclofenac sodium/poloxamer 407 (P 407)/poloxamer 188 (P 188)/sodium chloride (2.5/15/17/0.8%)] were significantly higher compared with those in semi-solid suppository. Furthermore, it gave significantly faster Tmax of diclofenac sodium than did semi-solid suppository, indicating that the diclofenac sodium from poloxamer gel could be absorbed faster than that from semi-solid one in rats. It did not cause any morphological damage to the rectal tissues. These results suggested that poloxamer gel with sodium chloride could be a more effective and safe rectal delivery system of diclofenac sodium.

Absorption↗

Physicochemical characterization and in vivo evaluation of thermosensitive diclofenac liquid suppository.

Liquid suppository systems composed of poloxamers and bioadhesive polymers were easy to administer to the anus and mucoadhesive to the rectal tissues without leakage after the dose. However, a liquid suppository containing diclofenac sodium could not be developed using bioadhesive polymers, since the drug was precipitated in this preparation. To develop a liquid suppository system using sodium chloride instead of bioadhesive polymers, the physicochemical properties such as gelation temperature, gel strength and bioadhesive force of various formulations composed of diclofenac sodium, poloxamers and sodium chloride were investigated. Furthermore, the pharmacokinetic study of diclofenac sodium delivered by the liquid suppository was performed. Diclofenac sodium significantly increased the gelation temperature and weakened the gel strength and bioadhesive force, while sodium chloride did the opposite. The liquid suppositories with less than 1.0% of sodium chloride, in which the drug was not precipitated, were inserted into the rectum without difficulty and leakage. Furthermore, liquid suppository gave significantly higher initial plasma concentrations and faster Tmax of diclofenac sodium than did solid suppository, indicating that drug from liquid suppository could be absorbed faster than that from solid one in rats. Our results suggested that a thermosensitive liquid suppository system with sodium chloride and poloxamers was a more physically stable, convenient and effective rectal dosage form for diclofenac sodium.

Adhesiveness↗

Physicochemical characterization of diclofenac sodium-loaded poloxamer gel as a rectal delivery system with fast absorption.

Rectal poloxamer gel systems composed of poloxamers and bioadhesive polymers were easy to administer to the anus and were mucoadhesive to the rectal tissues without leakage after the dose. However, a poloxamer gel containing diclofenac sodium could not be developed using bioadhesive polymers, since the drug was precipitated in this preparation. To develop a poloxamer gel using sodium chloride instead of bioadhesive polymers, the physicochemical properties such as gelation temperature, gel strength, and bioadhesive force of various formulations composed of diclofenac sodium, poloxamers, and sodium chloride were investigated. Furthermore, the pharmacokinetic study of diclofenac sodium delivered by the poloxamer gel was performed. Diclofenac sodium significantly increased the gelation temperature and weakened the gel strength and bioadhesive force, while sodium chloride did the opposite. The poloxamer gels with less than 1.0% sodium chloride, in which the drug was not precipitated, were inserted into the rectum without difficulty and leakage, and were retained in the rectum of rats for at least 6 hr. Furthermore, poloxamer gel gave significantly higher initial plasma concentrations and faster Tmax of diclofenac sodium than did solid suppository, indicating that drug from poloxamer gel could be absorbed faster than that from the solid one in rats. Our results suggested that a rectal poloxamer gel system with sodium chloride and poloxamers was a more physically stable, convenient, and effective rectal dosage form for diclofenac sodium.

Adhesiveness↗

Improved solubility and in vitro dissolution of Ibuprofen from poloxamer gel using eutectic mixture with menthol.

To improve the solubility and in vitro dissolution of poorly water-soluble ibuprofen with poloxamer and menthol, the effects of menthol and poloxamer 188 on the aqueous solubility of ibuprofen were investigated. The dissolution study of ibuprofen delivered by poloxamer gels composed of poloxamer 188 and menthol were performed. In the absence of poloxamer, the solubility of ibuprofen increased until the ratio of menthol to ibuprofen increased from 0:10 to 4:6, followed by an abrupt decrease in solubility above the ratio of 4:6, indicating that 4 parts of ibuprofen formed eutectic mixture with 6 parts of menthol. In the presence of poloxamer 188, the solutions with the same ratio of menthol to ibuprofen showed abrupt increase in the solubility of ibuprofen. Furthermore, the solution with ratio of 4:6 showed more than 2.5- and 6-fold increase in the solubility of ibuprofen compared with that without poloxamer and that without menthol, respectively. The poloxamer gel with menthol/ibuprofen ratio of 1:9 and higher than 15% poloxamer 188 showed the maximum solubility of ibuprofen, 1.2 mg/ml. Menthol improved the dissolution rates of ibuprofen from poloxamer gels. Dissolution mechanism showed that the dissolution rate of ibuprofen from the poloxamer gels without menthol was independent of the time, but the drug might be dissolved from the poloxamer gels with menthol by Fickian diffusion. Thus, the poloxamer gels developed using eutectic mixture with menthol, which gave the improved solubility and dissolution of drug, are potential candidates for ibuprofen-loaded transdermal and rectal delivery system.

Anti-Inflammatory Agents, Non-Steroidal↗