PubMed Health⌕ Search

Biomedical subjects

Jorge Navaza

Publications and source records attributed to Jorge Navaza.

13 recordsLinked to original sources

SCA: symmetry-based center assignment of 2D projections of symmetric 3D objects.

A method for finding the center of cryo-EM images which correspond to the projections of a symmetric 3D structure, based on mathematical properties of symmetry adapted functions and the Fourier-Bessel transform, is presented. It is a model independent one-step procedure with no parameters to be chosen by the user. The proposed method is tested in one synthetic tetrahedral case with different noise levels and in two real cases with D7 and icosahedral symmetries.

Chaperonin 60↗

NORMA: a tool for flexible fitting of high-resolution protein structures into low-resolution electron-microscopy-derived density maps.

This paper describes a freely available software suite that allows the modelling of large conformational changes of high-resolution three-dimensional protein structures under the constraint of a low-resolution electron-density map. Typical applications are the interpretation of electron-microscopy data using atomic scale X-ray structural models. The software package provided should enable the interested user to perform flexible fitting on new cases without encountering major technical difficulties. The NORMA software suite including three fully executable reference cases and extensive user instructions are available at http://www.elnemo.org/NORMA/.

Algorithms↗

Calculation of spherical harmonics and Wigner d functions by FFT. Applications to fast rotational matching in molecular replacement and implementation into AMoRe.

The FFT calculation of spherical harmonics, Wigner D matrices and rotation function has been extended to all angular variables in the AMoRe molecular replacement software. The resulting code avoids singularity issues arising from recursive formulas, performs faster and produces results with at least the same accuracy as the original code. The new code aims at permitting accurate and more rapid computations at high angular resolution of the rotation function of large particles. Test calculations on the icosahedral IBDV VP2 subviral particle showed that the new code performs on the average 1.5 times faster than the original code.

Algorithms↗

Combining experimental data for structure determination of flexible multimeric macromolecules by molecular replacement.

A major effort has been made by the structural biology community to develop user-friendly software for the use of biologists. However, structural projects become more and more challenging and their solution often relies on a combination of information from various sources. Here, it is described how X-ray data, normal-mode analysis (NMA) and electron-microscopy (EM) data can be successfully combined in order to obtain a molecular-replacement (MR) solution for crystal structures containing multimeric molecules. NMA is used to simulate computationally the inherent internal flexibility of the monomer and thus enhance, together with the crystal noncrystallographic symmetry (NCS), the MR capabilities. NCS is also used to obtain a reliable EM reconstruction, which is then employed as a filter to construct oligomers starting from monomers. The feasibility of the direct use of EM reconstructions as a template for MR when the X-ray and EM data resolutions overlap is also discussed.

Agrobacterium tumefaciens↗

The birnavirus crystal structure reveals structural relationships among icosahedral viruses.

Double-stranded RNA virions are transcriptionally competent icosahedral particles that must translocate across a lipid bilayer to function within the cytoplasm of the target cell. Birnaviruses are unique among dsRNA viruses as they have a single T = 13 icosahedral shell, lacking the characteristic inner capsid observed in the others. We determined the crystal structures of the T = 1 subviral particle (260 angstroms in diameter) and of the T = 13 intact virus particle (700 angstroms in diameter) of an avian birnavirus to 3 angstroms and 7 angstroms resolution, respectively. Our results show that VP2, the only component of the virus icosahedral capsid, is homologous both to the capsid protein of positive-strand RNA viruses, like the T = 3 nodaviruses, and to the T = 13 capsid protein of members of the Reoviridae family of dsRNA viruses. Together, these results provide important insights into the multiple functions of the birnavirus capsid and reveal unexpected structural relationships among icosahedral viruses.

Amino Acid Sequence↗

Structure of birnavirus-like particles determined by combined electron cryomicroscopy and X-ray crystallography.

Birnaviruses possess a capsid with a single protein layer in contrast to most double-stranded RNA viruses infecting multicellular eukaryotes. Using freeze-drying and heavy metal shadowing, the capsids of two birnaviruses, infectious bursal disease virus (IBDV) and infectious pancreatic necrosis virus, as well as of an IBDV virus-like particle (VLP) are shown to follow the same T=13 laevo icosahedral geometry. The structure of the VLP was determined at a resolution of approximately 15 A (1.5 nm) by a combination of electron cryomicroscopy and a recently developed three-dimensional reconstruction method, where the scattering density is expressed in terms of symmetry-adapted functions. This reconstruction methodology is well adapted to the icosahedral symmetry of viruses and only requires a small number of images to analyse. The atomic model of the external capsid protein, VP2, recently determined by X-ray crystallography, fits well into the VLP reconstruction and occupies all the electron densities present in the map. Thus, similarly to the IBDV virion, only VP2 forms the icosahedral layer of the VLP. The other components of both VLP and IBDV particles that play a crucial role in the capsid assembly, VP1, VP3 and the peptides arising from the processing of pVP2, do not follow the icosahedral symmetry, allowing them to be involved in other processes such as RNA packaging.

Birnaviridae↗

The crystal structure of a bacterial class II ketol-acid reductoisomerase: domain conservation and evolution.

Ketol-acid reductoisomerase (KARI; EC 1.1.1.86) catalyzes two steps in the biosynthesis of branched-chain amino acids. Amino acid sequence comparisons across species reveal that there are two types of this enzyme: a short form (Class I) found in fungi and most bacteria, and a long form (Class II) typical of plants. Crystal structures of each have been reported previously. However, some bacteria such as Escherichia coli possess a long form, where the amino acid sequence differs appreciably from that found in plants. Here, we report the crystal structure of the E. coli enzyme at 2.6 A resolution, the first three-dimensional structure of any bacterial Class II KARI. The enzyme consists of two domains, one with mixed alpha/beta structure, which is similar to that found in other pyridine nucleotide-dependent dehydrogenases. The second domain is mainly alpha-helical and shows strong evidence of internal duplication. Comparison of the active sites between KARI of E. coli, Pseudomonas aeruginosa, and spinach shows that most residues occupy conserved positions in the active site. E. coli KARI was crystallized as a tetramer, the likely biologically active unit. This contrasts with P. aeruginosa KARI, which forms a dodecamer, and spinach KARI, a dimer. In the E. coli KARI tetramer, a novel subunit-to-subunit interacting surface is formed by a symmetrical pair of bulbous protrusions.

Amino Acid Sequence↗

Structural peptides of a nonenveloped virus are involved in assembly and membrane translocation.

The capsid of infectious bursal disease virus (IBDV), a nonenveloped virus of the family Birnaviridae, has a T=13l icosahedral shell constituted by a single protein, VP2, and several disordered peptides, all derived from the precursor pVP2. In this study, we show that two of the peptides, pep11 and pep46, control virus assembly and cell entry. Deletion of pep11 or even simple substitution of most of its residues blocks the capsid morphogenesis. Removal of pep46 also prevents capsid assembly but leads to the formation of subviral particles formed by unprocessed VP2 species. Fitting with the VP2 atomic model into three-dimensional reconstructions of these particles demonstrates that the presence of uncleaved pep46 causes a steric hindrance at the vertices, blocking fivefold axis formation. Mutagenesis of the pVP2 maturation sites confirms that C terminus processing is necessary for VP2 to acquire the correct icosahedral architecture. All peptides present on virions are accessible to proteases or biochemical labeling. One of them, pep46, is shown to induce large structural rearrangements in liposomes and to destabilize target membranes, demonstrating its implication in cell entry.

Amino Acid Substitution↗

Normal mode-based fitting of atomic structure into electron density maps: application to sarcoplasmic reticulum Ca-ATPase.

A method for the flexible docking of high-resolution atomic structures into lower resolution densities derived from electron microscopy is presented. The atomic structure is deformed by an iterative process using combinations of normal modes to obtain the best fit of the electron microscopical density. The quality of the computed structures has been evaluated by several techniques borrowed from crystallography. Two atomic structures of the SERCA1 Ca-ATPase corresponding to different conformations were used as a starting point to fit the electron density corresponding to a different conformation. The fitted models have been compared to published models obtained by rigid domain docking, and their relation to the known crystallographic structures are explored by normal mode analysis. We find that only a few number of modes contribute significantly to the transition. The associated motions involve almost exclusively rotation and translation of the cytoplasmic domains as well as displacement of cytoplasmic loops. We suggest that the movements of the cytoplasmic domains are driven by the conformational change that occurs between nonphosphorylated and phosphorylated intermediate, the latter being mimicked by the presence of vanadate at the phosphorylation site in the electron microscopy structure.

Calcium-Transporting ATPases↗

Purification, crystallization and preliminary X-ray analysis of Triatoma virus (TrV) from Triatoma infestans.

Triatoma virus (TrV) is a viral pathogen of the blood-sucking reduviid bug Triatoma infestans, the most important vector of American human trypanosomiasis (Chagas' disease). TrV has been putatively classified as a member of the Cripavirus genus (type cricket paralysis virus) in the Dicistroviridae family. This work describes the purification of TrV particles from infected T. infestans and their crystallization and preliminary crystallographic analyses. Two different crystal forms, rhombohedral and orthorhombic, were obtained at room temperature by the hanging-drop vapour-diffusion technique using polyethylene glycol and polyethylene glycol monomethylether as precipitants. The rhombohedral crystals have unit-cell parameters a = b = 306.6, c = 788.4 A (hexagonal setting), diffract to 3.2 A resolution and contain one-third of the viral particle per asymmetric unit. The orthorhombic crystals have cell parameters a = 336, b = 351, c = 332 A, diffract to about 2.5 A resolution, and contain one-half of a virus particle in the asymmetric unit. A complete diffraction data set has been collected to 3.2 A resolution, using synchrotron radiation, from a single rhombohedral crystal under cryogenic conditions.

Animals↗

Visualization of the target-membrane-inserted fusion protein of Semliki Forest virus by combined electron microscopy and crystallography.

Semliki Forest virus enters cells by receptor-mediated endocytosis. The acidic environment of the endosome triggers a membrane fusion reaction that is mediated by the E1 glycoprotein. During fusion, E1 rearranges from an E1/E2 heterodimer to a highly stable, membrane-inserted E1 homotrimer (E1HT). In this study, we analyzed E1HT by a combination of electron cryomicroscopy, electron crystallography of negatively stained 2D crystals, and fitting of the available X-ray structure of the monomeric E1 ectodomain into the resulting 3D reconstruction. The visualized E1HT reveals that the ectodomain has reoriented vertically and inserted the distal tip of domain II into the lipid bilayer. Our data allow the visualization of a viral fusion protein inserted in its target membrane and demonstrate that insertion is a cooperative process, resulting in rings composed of five to six homotrimers.

Animals↗

On the computation of structure factors by FFT techniques.

The method of structure-factor calculation by fast Fourier transform techniques [Ten Eyck (1977). Acta Cryst. A33, 486-492] is here reviewed. It is found that the recommended sampling of three times the highest index in each direction [Lipson & Cochran (1966). The Determination of Crystal Structures, 3rd ed., pp. 94-102. Ithaca: Cornell University Press] is appropriate for any resolution, provided an adequate Gaussian dampening factor is used. A rule is given to determine this factor.

Journal Article↗

On the three-dimensional reconstruction of icosahedral particles.

The problem of reconstructing an isolated particle from its projections, using spherical harmonics to represent the scattering density, is reformulated. A technique that makes explicit and efficient use of the symmetry to describe the angular part of the scattering density is developed in full detail for the particular case of icosahedral symmetry. It provides a very concise method, where the effort is concentrated in the determination of the radial part of the Fourier transform of the particle scattering density. The method allows individual-image model-independent view determination. An illustrative numerical example is given.

Algorithms↗