PubMed Health⌕ Search

Biomedical subjects

Joseph Cappello

Publications and source records attributed to Joseph Cappello.

9 recordsLinked to original sources
PubMed2004

In vitro and in vivo evaluation of recombinant silk-elastinlike hydrogels for cancer gene therapy.

The objectives of this study were to evaluate: (i). the influences of hydrogel geometry, DNA molecular weight, and DNA conformation on DNA release from a silk-elastinlike protein polymer (SELP) hydrogel, (ii). the bioactivity and transfection efficiency of encapsulated DNA over time in vitro, (iii). the delivery and transfection of a reporter gene in a murine model of human breast cancer in vivo, and (iv). the in vitro release and bioactivity of adenovirus containing the green fluorescent protein (gfp) gene as a marker of gene transfer. Plasmid DNA was released from SELP hydrogels in a size-dependent manner, with the average effective diffusivity ranging from 1.70+/-0.52 x 10(-12) cm(2)/s for a larger plasmid (11 kbp) to 2.55+/-0.51 x 10(-10) cm(2)/s for a smaller plasmid (2.6 kbp). Plasmid conformation also influenced the rate of release, with the rank order linear>supercoiled>open-circular. DNA retained bioactivity in vitro, after encapsulation in a SELP hydrogel for up to 28 days. Delivery of pRL-CMV from a SELP hydrogel resulted in increased transfection in a murine model of human breast cancer by 1-3 orders of magnitude, as compared to naked DNA. The release of a bioactive adenoviral vector was related to the concentration of the polymer in the hydrogel. These studies indicate that genetically engineered SELP hydrogels have potential as matrices for controlled nonviral and viral gene delivery.

Amino Acid Sequence↗
PubMed2002

Genetically engineered silk-elastinlike protein polymers for controlled drug delivery.

The silk-elastinlike class of genetically engineered protein polymers is composed of tandemly repeated silk-like (Gly-Ala-Gly-Ala-Gly-Ser) and elastin-like (Gly-Val-Gly-Val-Pro) amino acid blocks. The precision with which these polymers can be synthesized, as well as the ability to incorporate motifs that allow for gel-formation, stimuli-sensitivity, biodegradation, and biorecognition have stimulated interest in their use for controlled drug and gene delivery. This review will focus on the synthesis and characterization of silk-elastinlike polymers as related to controlled drug delivery. The design and biological synthesis of the copolymers, by recombinant DNA techniques, are reviewed. The characterization of the polymers is discussed. Finally, biocompatibility of the polymers and recent studies to determine their potential utility for controlled drug and gene delivery are reviewed.

Bacterial Proteins↗
PubMed2002

Solute diffusion in genetically engineered silk-elastinlike protein polymer hydrogels.

The partitioning and diffusion behavior of theophylline, vitamin B(12), and cytochrome c in physically crosslinked networks of a genetically engineered silk-elastinlike protein-based (SELP) copolymer with an amino acid sequence of [(GVGVP)(4)GKGVP(GVGVP)(3)(GAGAGS)(4)](12) was investigated. The effect of gelation kinetics on the equilibrium swelling ratio and normalized dimensions of loaded SELP hydrogel disks before and after release studies was also examined. Size dependent release behavior was quantified by diffusion studies with equilibrium loaded SELP hydrogels. Direct loading diffusion studies confirmed that hydrogels produced by direct incorporation of cytochrome c with the aqueous SELP solution did not significantly influence the release behavior compared to equilibrium loaded hydrogels. An overall increase in the equilibrium swelling ratio after the release studies was observed. Analysis of the hydrogel disk dimensions after the release studies revealed no expansion of the disk dimensions. The apparent increase in the equilibrium swelling ratio was most likely due to a decrease in the hydrogel crosslinking density following the removal of the polymer soluble fraction over the course of the release study.

Amino Acid Sequence↗
PubMed2002

Genetic synthesis and characterization of pH- and temperature-sensitive silk-elastinlike protein block copolymers.

The purpose of this work was to synthesize and characterize a pH- and temperature-sensitive block copolymer containing repeating sequences from silk (Gly-Ala-Gly-Ala-Gly-Ser) and elastin (Gly-Val-Gly-Val-Pro) protein. The monomer contained one repeat of silk and eight repeat units of elastin, with the first valine in one of the elastin repeats being replaced by glutamic acid. The copolymer was synthesized using genetic engineering techniques. The sensitivity of the copolymer to pH and temperature was examined at various polymer concentrations and ionic strengths. Turbidity measurements were carried out over a temperature range of 20 to 100 degrees C at various pH, concentration, and ionic strength values. The introduction of an ionizable residue (glutamic acid) rendered the copolymer sensitive to changes in pH. The transition termperature (T(t)), the temperature at which the polymer became insoluble upon increase in temperature, was modulated by changing the pH. In general, the T(t) value, was found: (1) to increase with an increase in pH, (2) to decrease with increasing ionic strength, and (3) to decrease with increasing concentration. Results of these studies suggest that by strategic placement of charged amino acids in genetically engineered silk-elastinlike protein block copolymers it is possible to precisely control sensitivity to stimuli such as pH and temperature.

Amino Acid Sequence↗
PubMed2002

Swelling behavior of a genetically engineered silk-elastinlike protein polymer hydrogel.

The influence of environmental conditions such as pH, temperature, and ionic strength on the equilibrium swelling ratio of physically crosslinked networks of a genetically engineered silk-elastinlike protein-based copolymer (SELP) with an amino acid repeat sequence of [(GVGVP)4GKGVP(GVGVP)3(GAGAGS)4]12 was investigated. The effects of gelation cure time and initial polymer concentration on the equilibrium swelling ratio and soluble fraction of the hydrogels were also studied. It was found that the soluble fraction linearly correlated with the initial polymer concentration at higher gelation times. Soluble fraction results suggest that final hydrogel water content may be controlled by both initial polymer concentration and gelation time. Equilibrium swelling studies demonstrated that these hydrogels are relatively insensitive to environmental changes such as pH, temperature, and ionic strength. Over the concentration range studied, it was found that an increase in gelation time at 37 degrees C resulted in lower hydrogel weight equilibrium swelling ratios, which corresponds to less soluble polymer released post-gelation. Together, these results have implications for the controlled delivery of bioactive agents from silk-elastinlike hydrogels.

Amino Acid Sequence↗
PubMed2002

Controlled release of plasmid DNA from a genetically engineered silk-elastinlike hydrogel.

PURPOSE: The purpose of this study was to evaluate the potential of a genetically engineered silk-elastinlike polymer (SELP) as a matrix for the controlled release of plasmid DNA. METHODS: The influences of SELP concentration, DNA concentration, SELP cure time, and buffer ionic strength on the release of DNA from SELP hydrogels were investigated. To calculate the average effective diffusivity of DNA within the hydrogels, the release data were fitted to a known equation. RESULTS: DNA was released from SELP hydrogels by an ion-exchange mechanism. Under the conditions studied, the release rate was influenced by buffer ionic strength, SELP concentration, and SELP cure time but not DNA concentration. The apparent diffusivity of pRL-CMV plasmid DNA in SELP hydrogels ranged from 3.78 +/- 0.37 x 10(-10) cm2/s (for hydrogels containing 12% w/w SELP and cured for 4 h) to 4.69 +/- 2.81 x 10(-9) cm2/s (for hydrogels containing 8% w/w SELP and cured for 1 h). CONCLUSIONS: The ability to precisely customize the structure and physicochemical properties of SELPs using recombinant techniques, coupled with their ability to form injectable, in situ hydrogel depots that release DNA, renders this class of polymers an interesting candidate for further evaluation in controlled gene delivery.

Amino Acid Sequence↗
PubMedDate not supplied

Genetic engineering of stimuli-sensitive silkelastin-like protein block copolymers.

Differentially charged analogues of block copolymers containing repeating sequences from silk (GAGAGS) and elastin (GVGVP) were synthesized using genetic engineering techniques by replacing a valine residue with glutamic acid. The sensitivity to pH and temperature was examined at various polymer concentrations, ionic strengths, and polymer lengths. The polymers transitioned from soluble to precipitate state over narrow temperature ranges. The transition temperature T(t) (the temperature at which half-maximal spectrophotometric absorption was observed) increased with increasing pH up to pH 7.0 and leveled off above this value for the Glu-containing polymer (17E)(11). T(t) was independent of pH for the Val-containing polymer (17V)(11). It decreased with increasing ionic strength, polymer concentration, and polymer length for both polymers. These results suggest that by substituting charged amino acids for neutral amino acids at strategic locations in the polymer backbone and by control of the length of silkelastin-like block copolymers using genetic engineering techniques, it is possible to precisely control sensitivity to pH, temperature, and ionic strength.

Amino Acid Sequence↗
PubMedDate not supplied

Molecular engineering of silk-elastinlike polymers for matrix-mediated gene delivery: biosynthesis and characterization.

The unique advantage of genetic engineering techniques for the design and development of polymers for controlled gene delivery lies in exquisite control over polymer structure. In this article we report the biosynthesis and characterization of a series of new silk-elastinlike protein polymers (SELPs), namely, SELP415K, with larger elastin blocks per monomer unit than SELP47K previously studied for matrix-mediated gene delivery. A new cloning strategy was used, where a block of eight elastin units (8E) was integrated into the existing DNA sequence of SELP47K monomer genes using appropriate restriction endonuclease recognition sites. Following random multimerization, multimer gene segments of desired size were selected, expressed, and purified on Ni-agarose columns. The molecular weight and sequence composition of the purified SELPs were determined by MALDI-TOF and amino acid analysis, respectively. The influence of structural changes on the rheological properties of the polymers was investigated. In addition, hydrogel disks were prepared from 47K and 415K-8mer polymer solutions, and the effects of cure time and environmental conditions on the hydrogel equilibrium swelling ratio as a function of polymer composition were studied. DNA sequencing and agarose gel electrophoresis confirmed the successful cloning of the monomer gene segment of SELP415K consisting of 312 bp. Random concatemerization of SELP415K monomer gene segments resulted in a library of SELP415K multimer sequences of 6, 8, and 10 repeats respectively, each yielding a polymer with exact molecular weight and sequence. Rheometric measurements showed that both complex shear modulus (G*) and gelation point were influenced by polymer composition. Equilibrium swelling studies on hydrogel disks prepared from 47K and 415K-8mer polymer solutions showed that changes in polymer composition resulted in different gelation patterns and increased sensitivity toward changes in temperature and ionic strength but not pH. Together these results demonstrate the potential of recombinant techniques in engineering polymers with defined structures which allows the study of the structural parameters affecting matrix-mediated delivery of genes and bioactive agents.

Amino Acid Sequence↗