Biomedical subjects

Judy Yeh

Publications and source records attributed to Judy Yeh.

12 recordsLinked to original sources

PubMed2007

Microfluidic patterning for fabrication of contractile cardiac organoids.

The development of in vitro methods of engineering three-dimensional cardiac tissues can be useful for tissue replacement, diagnostics and drug discovery. Here, we introduce the use of patterned hyaluronic acid (HA) substrates generated using microfluidic patterning as a method of fabricating 3D cardiac organoids. HA micropatterns served as inductive templates for organoid assembly. Upon seeding, cardiomyocytes elongated and aligned along the pattern direction attaching preferentially to the glass substrate and the interface between HA patterns and glass substrate. After 3 days in culture, the linearly aligned myocytes detached from the surface and formed contractile cardiac organoids. The procedure can be utilized to simply, rapidly and inexpensively create in vitro cardiac tissue models.

Animals↗

PubMed2006

Micromolding of photocrosslinkable hyaluronic acid for cell encapsulation and entrapment.

Micropatterning of hydrogels is potentially useful for a variety of applications, including tissue engineering, fundamental biological studies, diagnostics, and high-throughput screening. Although synthetic polymers have been developed for these applications, natural polymers such as polysaccharides may have advantages for biological samples and cell-based devices because they are natural components of the in vivo microenvironment. In this study, we synthesized and used hyaluronic acid (HA) modified with photoreactive methacrylates to fabricate microstructures as functional components of microfabricated devices. To demonstrate the universality of this approach, two types of microstructures were formed. In the first approach, HA microstructures were fabricated and used as docking templates to enable the subsequent formation of cell microarrays within low shear stress regions of the patterns. Cells within these microwells remained viable, could generate spheroids, and could be retrieved using mechanical disruption. In the second approach, cells were encapsulated directly within the HA hydrogels. Arrays of viable embryonic stem (ES) cells or fibroblasts were encapsulated within HA hydrogels and could later be recovered using enzymatic digestion of the microstructures. These results demonstrate that it is possible to incorporate photocrosslinkable HA, a natural, versatile, degradable, and biocompatible biopolymer, into micro-electromechanical systems.

Animals↗

PubMed2006

Co-culture of human embryonic stem cells with murine embryonic fibroblasts on microwell-patterned substrates.

Human embryonic stem (hES) cells are generally cultured as cell clusters on top of a feeder layer formed by mitotically inactivated murine embryonic fibroblasts (MEFs) to maintain their undifferentiated state. This co-culture system, which is typically used to expand the population of undifferentiated hES cells, presents several challenges since it is difficult to control cell cluster size. Large cell clusters tend to differentiate at the borders, and clusters with different sizes may lead to heterogeneous differentiation patterns within embryoid bodies. In this work, we develop a new approach to culture hES cells with controlled cluster size and number through merging microfabrication, and biomaterials technologies. Polymeric microwells were fabricated and used to control the size and uniformity of hES cell clusters in co-culture with MEFs. The results show that it is possible to culture hES cells homogeneously while keeping their undifferentiated state as confirmed by the expression of stem cell markers octamer binding protein 4 (Oct-4) and alkaline phosphatase (ALP). In addition, these clusters can be recovered from the microwells to generate nearly homogeneous cell aggregates for differentiation experiments.

Animals↗

PubMed2006

Micromolding of shape-controlled, harvestable cell-laden hydrogels.

Encapsulation of mammalian cells within hydrogels has great utility for a variety of applications ranging from tissue engineering to cell-based assays. In this work, we present a technique to encapsulate live cells in three-dimensional (3D) microscale hydrogels (microgels) of controlled shapes and sizes in the form of harvestable free standing units. Cells were suspended in methacrylated hyaluronic acid (MeHA) or poly(ethylene glycol) diacrylate (PEGDA) hydrogel precursor solution containing photoinitiator, micromolded using a hydrophilic poly(dimethylsiloxane) (PDMS) stamp, and crosslinked using ultraviolet (UV) radiation. By controlling the features on the PDMS stamp, the size and shape of the molded hydrogels were controlled. Cells within microgels were well distributed and remained viable. These shape-specific microgels could be easily retrieved, cultured and potentially assembled to generate structures with controlled spatial distribution of multiple cell types. Further development of this technique may lead to applications in 3D co-cultures for tissue/organ regeneration and cell-based assays in which it is important to mimic the architectural intricacies of physiological cell-cell interactions.

Animals↗

PubMed2006

Micromolding of photocrosslinkable chitosan hydrogel for spheroid microarray and co-cultures.

Bioengineering approaches, such as co-cultures of multiple cell types, that aim to mimic the physiological microenvironment may be beneficial for optimizing cell function and for engineering tissues in vitro. This study describes a novel method for preparing a spheroid microarray on microfabricated hydrogels, alone or in co-cultures. Photocrosslinkable chitosan was synthesized and utilized for fabricating hydrogel microstructures through a micromolding process. The chitosan surface was initially cell repellent but became increasingly cell adhesive over time. By using this unique property of chitosan hydrogels, it was possible to generate patterned co-cultures of spheroids and support cells. In this scheme, cells were initially microarrayed within low shear stress regions of microwells. Human hepatoblastoma cells, Hep G2, seeded in these wells formed spheroids with controlled sizes and shapes and stably secreted albumin during the culture period. The change of cell adhesive properties in the chitosan surface facilitated the adhesion and growth of a second cell type, NIH-3T3 fibroblast, and therefore enabled co-cultures of hepatocyte spheroids and fibroblast monolayers. This co-culture system could be a useful platform for studying heterotypic cell-cell interactions, for drug screening, and for developing implantable bioartificial organs.

Animals↗

PubMed2006

Interplay of biomaterials and micro-scale technologies for advancing biomedical applications.

Micro-scale technologies have already dramatically changed our society through their use in the microelectronics and telecommunications industries. Today these engineering tools are also useful for many biological applications ranging from drug delivery to DNA sequencing, since they can be used to fabricate small features at a low cost and in a reproducible manner. The discovery and development of new biomaterials aid in the advancement of these micro-scale technologies, which in turn contribute to the engineering and generation of new, custom-designed biomaterials with desired properties. This review aims to present an overview of the merger of micro-scale technologies and biomaterials in two-dimensional (2D) surface patterning, device fabrication and three-dimensional (3D) tissue-engineering applications.

Base Sequence↗

PubMed2005

Cultivation of human embryonic stem cells without the embryoid body step enhances osteogenesis in vitro.

Osteogenic cultures of embryonic stem cells (ESCs) are predominately derived from three-dimensional cell spheroids called embryoid bodies (EBs). An alternative method that has been attempted and merits further attention avoids EBs through the immediate separation of ESC colonies into single cells. However, this method has not been well characterized and the effect of omitting the EB step is unknown. Herein, we report that culturing human embryonic stem cells (hESCs) without the EB stage leads to a sevenfold greater number of osteogenic cells and to spontaneous bone nodule formation after 10-12 days. In contrast, when hESCs were differentiated as EBs for 5 days followed by plating of single cells, bone nodules formed after 4 weeks only in the presence of dexamethasone. Furthermore, regardless of the inclusion of EBs, bone matrix formed, including cement line matrix and mineralized collagen, which displayed apatitic mineral (PO4) with calcium-to-phosphorous ratios similar to those of hydroxyapatite and human bone. Together these results demonstrate that culturing hESCs without an EB step can be used to derive large quantities of functional osteogenic cells for bone tissue engineering.

Alkaline Phosphatase↗

PubMed2005

Micropatterned cell co-cultures using layer-by-layer deposition of extracellular matrix components.

Micropatterned cellular co-cultures were fabricated using three major extracellular matrix components: hyaluronic acid (HA), fibronectin (FN) and collagen. To fabricate co-cultures with these components, HA was micropatterned on a glass substrate by capillary force lithography, and the regions of exposed glass were coated with FN to generate cell adhesive islands. Once the first cell type was immobilized on the adhesive islands, the subsequent electrostatic adsorption of collagen to HA patterns switched the non-adherent HA surfaces to adherent, thereby facilitating the adhesion of a second cell type. This technique utilized native extracellular matrix components and therefore affords high biological affinity and no cytotoxicity. This biocompatible co-culture system could potentially provide a new tool to study cell behavior such as cell-cell communication and cell-matrix interactions, as well as tissue-engineering applications.

Animals↗

PubMed2005

Cell docking inside microwells within reversibly sealed microfluidic channels for fabricating multiphenotype cell arrays.

We present a soft lithographic method to fabricate multiphenotype cell arrays by capturing cells within an array of reversibly sealed microfluidic channels. The technique uses reversible sealing of elastomeric polydimethylsiloxane (PDMS) molds on surfaces to sequentially deliver various fluids or cells onto specific locations on a substrate. Microwells on the substrate were used to capture and immobilize cells within low shear stress regions inside channels. By using an array of channels it was possible to deposit multiple cell types, such as hepatocytes, fibroblasts, and embryonic stem cells, on the substrates. Upon formation of the cell arrays on the substrate, the PDMS mold could be removed, generating a multiphenotype array of cells. In addition, the orthogonal alignment and subsequent attachment of a secondary array of channels on the patterned substrates could be used to deliver fluids to the patterned cells. The ability to position many cell types on particular regions within a two dimensional substrate could potentially lead to improved high-throughput methods applicable to drug screening and tissue engineering.

Cell Adhesion↗

PubMed2004

Molded polyethylene glycol microstructures for capturing cells within microfluidic channels.

The ability to control the deposition and location of adherent and non-adherent cells within microfluidic devices is beneficial for the development of micro-scale bioanalytical tools and high-throughput screening systems. Here, we introduce a simple technique to fabricate poly(ethylene glycol)(PEG) microstructures within microfluidic channels that can be used to dock cells within pre-defined locations. Microstructures of various shapes were used to capture and shear-protect cells despite medium flow in the channel. Using this approach, PEG microwells were fabricated either with exposed or non-exposed substrates. Proteins and cells adhered within microwells with exposed substrates, while non-exposed substrates prevented protein and cell adhesion (although the cells were captured inside the features). Furthermore, immobilized cells remained viable and were stained for cell surface receptors by sequential flow of antibodies and secondary fluorescent probes. With its unique strengths in utility and control, this approach is potentially beneficial for the development of cell-based analytical devices and microreactors that enable the capture and real-time analysis of cells within microchannels, irrespective of cell anchorage properties.

Animals↗

PubMed2004

A soft lithographic approach to fabricate patterned microfluidic channels.

The control of surface properties and spatial presentation of functional molecules within a microfluidic channel is important for the development of diagnostic assays and microreactors and for performing fundamental studies of cell biology and fluid mechanics. Here, we present a simple technique, applicable to many soft lithographic methods, to fabricate robust microchannels with precise control over the spatial properties of the substrate. In this approach, the patterned regions were protected from oxygen plasma by controlling the dimensions of the poly(dimethylsiloxane) (PDMS) stamp and by leaving the stamp in place during the plasma treatment process. The PDMS stamp was then removed, and the microfluidic mold was irreversibly bonded to the substrate. The approach was used to pattern a nonbiofouling poly(ethylene glycol)-based copolymer or the polysaccharide hyaluronic acid within microfluidic channels. These nonbiofouling patterns were then used to fabricate arrays of fibronectin and bovine serum albumin as well as mammalian cells. In addition, further control over the deposition of multiple proteins onto multiple or individual patterns was achieved using laminar flow. Also, cells that were patterned within channels remained viable and capable of performing intracellular reactions and could be potentially lysed for analysis.

Animals↗

PubMed2004

Layer-by-layer deposition of hyaluronic acid and poly-L-lysine for patterned cell co-cultures.

A novel method for patterning cellular co-cultures that uses the layer-by-layer deposition of ionic biopolymers is described. Non-biofouling hyaluronic acid (HA) micropatterns were used to immobilize cells and proteins to glass substrates. Subsequent ionic adsorption of poly-L-lysine (PLL) to HA patterns was used to switch the HA surfaces from cell repulsive to adherent thereby facilitating the adhesion of a second cell type. The utility of this approach to pattern co-cultures of hepatocytes or embryonic stem cells with fibroblasts was demonstrated. In addition, the versatility of this approach to generate patterned co-cultures irrespective of the primary cell seeding and relative adhesion of the seeded cells was demonstrated. Thus, the proposed method may be a useful tool for fabricating controlled cellular co-cultures for cell-cell interaction studies and tissue engineering applications.

Adsorption↗