PubMed Health⌕ Search

Biomedical subjects

Julian D C Jones

Publications and source records attributed to Julian D C Jones.

At least 19 recordsLinked to original sources

Dynamic two-axis curvature measurement using multicore fiber Bragg gratings interrogated by arrayed waveguide gratings.

We describe the use of arrayed waveguide gratings (AWGs) in the interrogation of fiber Bragg gratings (FBGs) for dynamic strain measurement. The ratiometric AWG output was calibrated in a static deflection experiment over a +/-200 microepsilon range. Dynamic strain measurement was demonstrated with a FBG in a conventional single-mode fiber mounted on the surface of a vibrating cantilever and on a piezoelectric actuator, giving a resolution of 0.5 microepsilon at 2.4 kHz. We present results of this technique extended to measure the dynamic differential strain between two FBG pairs within a multicore fiber. An arbitrary cantilever oscillation of the multicore fiber was determined from curvature measurements in two orthogonal axes at 1125 Hz with a resolution of 0.05 m(-1).

Journal Article↗

High-speed phase-stepped digital speckle pattern interferometry using a complementary metal-oxide semiconductor camera.

A digital speckle pattern interferometer based on a complementary metal-oxide semiconductor (CMOS) camera is described. The temporal evolution of dynamic deformation is measured using interframe phase stepping. The flexibility of the CMOS detector is used to identify regions of interest with full-field time-averaged measurements and then to interrogate those regions with time-resolved measurements sampled at up to 70 kHz. A numerical and analytical investigation shows that the maximum surface velocity that can be reliably measured with interframe phase stepping corresponds to +/-0.3 times the surface velocity at which the interferogram is sampled at the Nyquist limit.

Journal Article↗

Laser-machined fibers as Fabry-Perot pressure sensors.

Cavities have been laser ablated in the ends of single-mode optical fibers and sealed by aluminized polycarbonate diaphragms to produce Fabry-Perot pressure sensors. Both conventional fibers and novel, multicore fibers were used, demonstrating the possibility of producing compact arrays of sensors and multiple sensors on an individual fiber 125 microm in diameter. This high spatial resolution can be combined with high temporal resolution by simultaneously interrogating the sensors by using separate laser sources at three wavelengths. Shock tube tests showed a sensor response time of 3 micros to a step increase in pressure.

Journal Article↗

Speckle contrast reduction in a large-core fiber delivering Q-switched pulses for fluid flow measurements.

Due to their capability for supporting high-peak powers, large-core hollow optical fibers may be used to deliver high-peak-power nanosecond pulses for the fluid flow measurement technique of particle image velocimetry [Meas. Sci. Technol. 16, 1119 (2005)]. One drawback of using such fibers for fluid flow measurements is that the output suffers from a speckled interference pattern due to the fiber's multimode nature, which can lead to a loss of spatial information and reduced data quality. Presented here is a technique to reduce the speckle contrast from these fibers when delivering nanosecond pulses. Significant smoothing of the output intensity distribution is demonstrated, giving an improved source of illumination for fluid flow measurements and other imaging techniques requiring pulsed laser illumination.

Journal Article↗

High-speed photogrammetry system for measuring the kinematics of insect wings.

We describe and characterize an experimental system to perform shape measurements on deformable objects using high-speed close-range photogrammetry. The eventual application is to extract the kinematics of several marked points on an insect wing during tethered and hovering flight. We investigate the performance of the system with a small number of views and determine an empirical relation between the mean pixel error of the optimization routine and the position error. Velocity and acceleration are calculated by numerical differencing, and their relation to the position errors is verified. For a field of view of approximately 40 mm x 40 mm, a rms accuracy of 30 mum in position, 150 mm/s in velocity, and 750 m/s2 in acceleration at 5000 frames/s is achieved. This accuracy is sufficient to measure the kinematics of hoverfly flight.

Animals↗

Strain and temperature sensitivity of a single-mode polymer optical fiber.

We have measured the optical phase sensitivity of fiber based on poly(methyl methacrylate) under near-single-mode conditions at 632.8 nm wavelength. The elongation sensitivity is 131 +/- 3 x 10(5) rad m(-1) and the temperature sensitivity is -212 +/- 26 rad m(-1) K(-1). These values are somewhat larger than those for silica fiber and are consistent with the values expected on the basis of the bulk polymer properties.

Journal Article↗

Process control of laser conduction welding by thermal imaging measurement with a color camera.

Conduction welding offers an alternative to keyhole welding. Compared with keyhole welding, it is an intrinsically stable process because vaporization phenomena are minimal. However, as with keyhole welding, an on-line process-monitoring system is advantageous for quality assurance to maintain the required penetration depth, which in conduction welding is more sensitive to changes in heat sinking. The maximum penetration is obtained when the surface temperature is just below the boiling point, and so we normally wish to maintain the temperature at this level. We describe a two-color optical system that we have developed for real-time temperature profile measurement of the conduction weld pool. The key feature of the system is the use of a complementary metal-oxide semiconductor standard color camera leading to a simplified low-cost optical setup. We present and discuss the real-time temperature measurement and control performance of the system when a defocused beam from a high power Nd:YAG laser is used on 5 mm thick stainless steel workpieces.

Journal Article↗

Transverse load and orientation measurement with multicore fiber Bragg gratings.

We demonstrate the sensitivity of Bragg gratings in a multicore fiber to transverse load. The Bragg peaks are split because of stress-induced birefringence, the magnitude of which depends upon the load and grating position relative to the load axis. Experiments show that a set of gratings in a four-core fiber can measure a load axis angle to +/- 5 degrees and a load magnitude to +/- 15 N m(-1) up to 2500 N m(-1). We consider alternative designs of multicore fiber for optimal load sensing and compare experimental and modeled data.

Journal Article↗

Improved hollow-core photonic crystal fiber design for delivery of nanosecond pulses in laser micromachining applications.

We report the delivery of high-energy nanosecond pulses (approximately 65 ns pulse width) from a high-repetition-rate (up to 100 kHz) Q-switched Nd:YAG laser through the fundamental mode of a hollow-core photonic crystal fiber (HC-PCF) at 1064 nm. The guided mode in the HC-PCF has a low overlap with the glass, allowing delivery of pulses with energies above those attainable with other fibers. Energies greater than 0.5 mJ were delivered in a single spatial mode through the hollow-core fiber, providing the pulse energy and high beam quality required for micromachining of metals. Practical micromachining of a metal sheet by fiber delivery has been demonstrated.

Crystallization↗

Optical techniques for real-time penetration monitoring for laser welding.

Optical techniques for real-time full-penetration monitoring for Nd:YAG laser welding have been investigated. Coaxial light emission from the keyhole is imaged onto three photodiodes and a camera. We describe the spectral and statistical analyses from photodiode signals, which indicate the presence of a full penetration. Two image processing techniques based on the keyhole shape recognition and the keyhole image intensity profile along the welding path are presented. An intensity ratio parameter is used to determine the extent of opening at the rear of a fully opened keyhole. We show that this parameter clearly interprets a hole in formation or a lack of penetration when welding is performed on workpieces with variable thicknesses at constant laser power.

Journal Article↗

Closed-loop power and focus control of laser welding for full-penetration monitoring.

We describe a closed-loop control system ensuring full penetration in welding by controlling the focus position and power of a 4-kW Nd:YAG laser. A focus position monitoring system was developed based on the chromatic aberration of the focusing optics. With the laser power control system we can determine the degree of penetration by analyzing the keyhole image intensity profile. We demonstrate performance in bead-on-plate welding of Inconel 718 and titanium. The focus control system maintained a focal position on tilted and nonflat workpieces, and the penetration monitoring technique successfully controlled the laser power to maintain the full-penetration regime in the presence of linear and step changes of thickness. Finally we discuss the performances and the limits of the systems when applied to a realistic complex aerospace component.

Journal Article↗

Fiber interferometer for simultaneous multiwavelength phase measurement with a broadband femtosecond laser.

We present a fiber interferometer for the simultaneous measurement of phase at multiple wavelengths from a single broadband femtosecond laser. Narrow-bandwidth fiber Bragg gratings isolate a particular frequency from the broad-bandwidth laser pulse produced. The multiwavelength phase data permit the unambiguous measurement range to be significantly increased compared with the wavelengths used in the interferometer. Preliminary experimental results are presented for a two-frequency sensor with an absolute range of 0.13 mm and associated dynamic range of 43,000:1.

Journal Article↗

Bend sensors with direction recognition based on long-period gratings written in D-shaped fiber.

The curvature- or bend-sensing response of long-period gratings (LPGs) UV inscribed in D-shaped fiber has been investigated experimentally. Strong fiber-orientation dependence of the spectral response when such LPGs are subjected to bending at different directions has been observed and is shown to form the basis for a new class of single-device sensor with vector-sensing capability. Potential applications utilizing the linear response and unique bend-orientation characteristics of the devices are discussed.

Journal Article↗

Differential birefringence in Bragg gratings in multicore fiber under transverse stress.

We present experimental measurements of the peak splitting of the reflection spectra of fiber Bragg gratings as a result of birefringence induced by transverse loading of a multicore fiber. Measurements show that the splitting is a function of the applied load and the direction of the load relative to the azimuth of the fiber. A model for calculating the stress in the fiber that is due to an applied load is in good agreement with our experimental observations.

Journal Article↗

Generalized frequency selection in multifrequency interferometry.

We present a generalized frequency selection method for N-frequency interferometry to form an optimum geometric series at synthetic wavelengths. The absolute range that is measurable is bounded by the number of beat frequency operations, phase noise, and the number of wavelengths used to form the geometric series of synthetic wavelengths. Theoretical predictions are compared with experimental results from a full-field fringe projector. A comparison of this technique with the method of excess fractions shows orders-of-magnitude faster processing with similar measurement reliability.

Journal Article↗

Quadratic behavior of fiber Bragg grating temperature coefficients.

We describe the characterization of the temperature and strain responses of fiber Bragg grating sensors by use of an interferometric interrogation technique to provide an absolute measurement of the grating wavelength. The fiber Bragg grating temperature response was found to be nonlinear over the temperature range -70 degrees C to 80 degrees C. The nonlinearity was observed to be a quadratic function of temperature, arising from the linear dependence on temperature of the thermo-optic coefficient of silica glass over this range, and is in good agreement with a theoretical model.

Journal Article↗

Compact effector optics for processing in limited physical access situations.

A major advantage of fiber-optic beam delivery in laser materials processing is the ability to guide the laser power to the location where it is needed, leaving the laser itself remote and protected from the process. This is of special importance if the processing is to be performed in a hazardous environment. Particular problems are faced by the nuclear industry where weld repair and surface treatment work are required inside radioactive installations. By use of fiber beam delivery, only part of the delivery system and effector optics become contaminated, but the expensive laser system does not. However, in many cases the region where repair is required is not only radioactive but has only limited physical access, e.g., inside tubes or into corners, which prevents use of standard effector optics. We present a new design to deal with such constraints of a 2-mm outer diameter employing a hollow waveguide and gas shielding. This design is optically characterized and its performance assessed in welding and surface treatment applications. The potential of this compact effector optics in limited physical access situations is clearly demonstrated.

Journal Article↗

Fiber-optic delivery of high-peak-power Q-switched laser pulses for in-cylinder flow measurement.

A bundle of optical fibers was constructed to deliver Q-switched frequency-doubled Nd:YAG laser pulses for the purpose of particle image velocimetry. Data loss that is due to fiber speckle was reduced by ensuring that each fiber was different in length by more than the coherence length of the laser being delivered. Hence, their speckle patterns will overlap but not interfere, producing more even illumination that is shown to reduce data loss. A custom-made diffractive optical element and careful endface preparation help to reduce damage to the fibers by the required high peak powers. With this method, pulse energies in excess of 25 mJ were delivered for a series of experimental trials within the cylinder head of an optically accessed internal combustion engine. Results from these trials are presented along with a comparison of measurements generated by conventionally delivered beams.

Journal Article↗