Biomedical subjects

Julie E Gough

Publications and source records attributed to Julie E Gough.

6 recordsLinked to original sources

PubMed2006

In vitro studies of annulus fibrosus disc cell attachment, differentiation and matrix production on PDLLA/45S5 Bioglass composite films.

The aim of this study was to investigate the potential of using PDLLA/45S5 (PDLLA--poly(D,L-lactide)) Bioglass composite films for the culture of annulus fibrosus (AF) cells in vitro with a view to a tissue engineering application. PDLLA films incorporated with different percentages (0, 5 and 30 (wt%)) of Bioglass particles were prepared by solvent casting and characterized by scanning electron microscopy (SEM), water contact angle and white-light interferometry. Bovine AF cell morphology and attachment were analysed using SEM. Cytoskeletal organization was determined by actin labelling with FITC-phalloidin using fluorescence microscopy. The amount of sulphated glycosaminoglycan (sGAG) and collagen produced by AF cells were quantified using the 1,9-dimethylmethylene blue (DMMB) and Sircol assays after 4 weeks in culture. Composite films of PDLLA filled with Bioglass are an appropriate substrate for annulus cells and these films promote the production of an extracellular matrix (ECM) containing abundant sGAGs and collagen. These findings provide a basis for the understanding of the production of ECM molecules by cells cultured on 2D PDLLA/45S5 Bioglass composite films. The results will provide new insights into the design and development of composites containing Bioglass and resorbable polymers as scaffolds for intervertebral disc tissue repair.

Animals↗

PubMed2006

Thermoreversible protein hydrogel as cell scaffold.

A thermoreversible fibrillar hydrogel has been formed from an aqueous lysozyme solution in the presence of dithiothreitol (DTT). Its physical properties and potential as a tissue engineering scaffold have been explored. Hydrogels were prepared by dissolving 3 mM protein in a 20 mM DTT/water mixture, heating to 85 degrees C and cooling at room temperature. No gel was observed for the equivalent sample without DTT. The elastic nature of the gel formed was confirmed by rheology, and the storage modulus of our gel was found to be of the same order of magnitude as for other cross-linked biopolymers. Micro differential scanning calorimetry (microDSC) experiments confirmed that the hydrogel was thermally reversible and that gelation and melting occurs through a solid-liquid-like first-order transition. Infrared spectroscopy of the hydrogel and transmission electron microscopy studies of very dilute samples revealed the presence of beta-sheet-rich fibrils that were approximately 4-6 nm in diameter and 1 mum in length. These fibrils are thought to self-assemble along their long axes to form larger fibers that become physically entangled to form the three-dimensional network observed in both cryo-scanning electron microscopy (cryo-SEM) and small-angle neutron scattering (SANS) studies. The hydrogel was subsequently cultured with 3T3 fibroblasts and cells spread extensively after 7 days and stretched actin filaments formed that were roughly parallel to each other, indicating the development of organized actin filaments in the form of stress fibers in cells.

Animals↗

PubMed2004

Genomic structure and cloning of two transcript isoforms of human Sp8.

BACKGROUND: The Specificity proteins (Sp) are a family of transcription factors that have three highly conserved zinc-fingers located towards the carboxy-terminal that bind GC-boxes and assist in the initiation of gene transcription. Human Sp1-7 genes have been characterized. Recently, the phenotype of Sp8 null mice has been described, being tailless and having severe truncation of both fore and hind limbs. They also have malformed brains with defective closure of the anterior and posterior neuropore during brain development. RESULTS: The human Sp8 gene is a three-exon gene that maps to 7p21.3, close to the related Sp4 gene. From an osteosarcoma cell line we cloned two transcript variants that use two different first exons and have a common second exon. One clone encodes a 508-residue protein, Sp8L (isoform 1) and the other a shorter 490-residue protein, Sp8S (isoform 2). These two isoforms are conserved being found also in mice and zebrafish. Analysis of the Sp8L protein sequence reveals an amino-terminal hydrophobic Sp-motif that is disrupted in Sp8S, a buttonhead box and three C2H2 zinc-fingers. Sp8 mRNA expression was detected in a wide range of tissues at a low level, with the highest levels being found in brain. Treatment of the murine pluripotent cell line C3H10T1/2 with 100 ng/mL BMP-2 induced Sp8 mRNA after 24 hours. CONCLUSIONS: There is conservation of the two Sp8 protein isoforms between primates, rodents and fish, suggesting that the isoforms have differing roles in gene regulation. Sp8 may play a role in chondrogenic/osteoblastic differentiation in addition to its role in brain and limb development.

Amino Acid Sequence↗

PubMed2004

Bioactive evaluation of 45S5 bioactive glass fibres and preliminary study of human osteoblast attachment.

Bioactive glass fibres can be used as tissue engineering scaffolds. In this investigation, the bioactive response of 45S5 glass fibres was assessed in simulated body fluid (SBF). Preliminary attachment of osteoblasts to the fibre surface was assessed, as were the fibre tensile strength and fracture toughness. Fourier transform infrared spectroscopy (FTIR) analysis revealed that hydroxyapatite (HA) was formed on the fibres' surface after 2-4 days in SBF. Raman micro-spectroscopic analysis was used to monitor development of the HA layer during immersion. A correlation was found between increase in intensity of the PO4(3-) peak near 964cm(-1) and appearance of crystalline HA (P-O bending peaks) using FTIR. Such results are encouraging for in situ bioactivity monitoring, as Raman spectra are insensitive to the presence of water, unlike FTIR. Average tensile strength of 45S5 fibres (79 microm diameter) was 340+/-140 MPa. Fracture toughness, determined using fracture surface analysis, was 0.7+/-0.1 MPa m1/2. Confocal microscopy revealed osteoblasts attached and spread along the fibres after 15-90 min culture. Scanning electron microscopy analysis showed that cells with filopodia and dorsal ruffles remained attached after 14 days in culture. These results are encouraging, as cell adhesion is an important first step prior to proliferation and differentiation.

Biocompatible Materials↗

PubMed2003

Expression of alternatively spliced isoforms of human Sp7 in osteoblast-like cells.

BACKGROUND: Osteogenic and chondrocytic differentiation involves a cascade of coordinated transcription factor gene expression that regulates proliferation and matrix protein formation in a defined temporo-spatial manner. Bone morphogenetic protein-2 induces expression of the murine Osterix/Specificity protein-7 (Sp7) transcription factor that is required for osteoblast differentiation and bone formation. Regulation of its expression may prove useful for mediating skeletal repair. RESULTS: Sp7, the human homologue of the mouse Osterix gene, maps to 12q13.13, close to Sp1 and homeobox gene cluster-C. The first two exons of the 3-exon gene are alternatively spliced, encoding a 431-residue long protein isoform and an amino-terminus truncated 413-residue short protein isoform. The human Sp7 protein is a member of the Sp family having 78% identity with Sp1 in the three, Cys2-His2 type, DNA-binding zinc-fingers, but there is little homology elsewhere. The Sp7 mRNA was expressed in human foetal osteoblasts and craniofacial osteoblasts, chondrocytes and the osteosarcoma cell lines HOS and MG63, but was not detected in adult femoral osteoblasts. Generally, the expression of the short (or beta) protein isoform of Sp7 was much higher than the long (or alpha) protein isoform. No expression of either isoform was found in a panel of other cell types. However, in tissues, low levels of Sp7 were detected in testis, heart, brain, placenta, lung, pancreas, ovary and spleen. CONCLUSIONS: Sp7 expression in humans is largely confined to osteoblasts and chondrocytes, both of which differentiate from the mesenchymal lineage. Of the two protein isoforms, the short isoform is most abundant.

Alternative Splicing↗

PubMed2002

Cytotoxicity of glutaraldehyde crosslinked collagen/poly(vinyl alcohol) films is by the mechanism of apoptosis.

Collagen has been investigated as a potential natural biomaterial, because of its occurrence in the extracellular matrix. Collagen requires crosslinking in this context, by reagents that are often cytotoxic. Glutaraldehyde is one such agent that is potentially cytotoxic. The aim of this study was to determine the cause of poor cell attachment and growth on collagen/poly(vinyl alcohol) bioartificial composite films, when crosslinked with glutaraldehyde. Dehydrothermal crosslinking was used as a comparison. Human osteoblasts were observed to undergo apoptosis on glutaraldehyde crosslinked films dependent on concentration of collagen present. Higher collagen content resulted in higher levels of apoptosis with poor cell attachment and spreading of remaining cells. Post-treatment of films with 8% L-glutamic acid prevented the apoptotic response of osteoblasts and allowed attachment and spreading. The addition of 100 nM insulin-like growth factor-1 to the culture medium also prevented apoptosis. Glutaraldehyde toxicity of crosslinked collagen has been demonstrated in this study, the mechanism of which is apoptosis. This study indicates that poor biocompatibility and induction of apoptosis on collagen/poly(vinyl alcohol) films crosslinked by glutaraldehyde are attributed to glutaraldehyde components on the surface of the films (not residual glutaraldehyde), whose effects can be quenched by glutamic acid, and prevented by insulin-like growth factor-1.

Apoptosis↗