PubMed Health⌕ Search

Biomedical subjects

Jun Han

Publications and source records attributed to Jun Han.

At least 37 records · Page 2Linked to original sources

Molecular structures and properties of the complete series of bromophenols: Density functional theory calculations.

The complete series of 19 bromophenols have been studied by density functional theory (DFT) calculations at the B3LYP/6-311G++(d,p) level. The molecular structures and properties of bromophenols are strongly influenced by intramolecular hydrogen bonding of ortho-bromine, steric and inductive effects of substituted bromine, and other intramolecular electrostatic interactions. Systematic trends in several structural parameters and molecular properties of bromophenols have been found with the increasing number of bromine substitutions, including increase in O-H bond length, decrease in C-O bond length, red shift in O-H stretching frequency, and blue shift in O-H torsional frequency. Correlations among several key molecular parameters as well as those with available aqueous pKa values are examined. Comparisons with chlorophenols have indicated that the inductive effect of substituted bromine appears larger and bromophenols are slightly stronger acids than chlorophenols.

Bromine↗

Adsorption of a cationic dye molecule on polystyrene microspheres in colloids: effect of surface charge and composition probed by second harmonic generation.

Nonlinear optical probe, second harmonic generation (SHG), of the adsorption of the dye molecule malachite green (MG), in cationic form at pH < or = 5, on polystyrene microspheres in aqueous solution is used to study the effect of surface charge and composition on molecular adsorption. Three types of polystyrene microspheres with different surface composition are investigated: (1) a sulfate terminated, anionic surface, (2) a neutral surface without any functional group termination, and (3) an amine terminated, cationic surface. The cationic dye was found to adsorb at all three surfaces, regardless of surface charge. The adsorption free energies, DeltaG's, measured for the three surfaces are -12.67, -12.39, and -10.46 kcal/mol, respectively, with the trend as expected from the charge interactions. The adsorption density on the anionic surface, where attractive charge-charge interaction dominates, is determined by the surface negative charge density. The adsorption densities on the neutral and cationic surfaces are on the other hand higher, perhaps as a result of a balance between minimizing repulsive charge interaction and maximizing attractive molecule-substrate and intermolecular interactions. The relative strength of the SH intensity per molecule, in combination of a model calculation, reveals that the C(2) axis of the MG molecule is nearly perpendicular to the surface on the anionic surface and tilts away from the surface norm when the surface is neutral and further away when cationic. Changing the pH of the solution may alter the surface charge and subsequently affect the adsorption configuration and SH intensity.

Adsorption↗

Theoretical study of hydrogen-bonded complexes of chlorophenols with water or ammonia: Correlations and predictions of pKa values.

A simple practical method for predicting the acidity constants (as pKa values) of chlorophenols is proposed based on density functional theory calculations of a series of hydrogen-bonded complexes of phenol and 19 different congeners of chlorophenol, with a single probe molecule, either water or ammonia. Relevant structural parameters and molecular properties of these complexes, primarily involving the acidic hydroxyl group, are examined and plotted against the known pKa values of 14 chlorophenols and phenol. Strong linear correlations are found for these compounds. Such correlations are used to determine the pKa values of five chlorophenols whose experimental acidities have large uncertainties. Similar predicted pKa values are obtained by using different structural parameters and molecular properties for the complexes with either probe molecule. The study may be extended to determine the acidity of other compounds with a single acidic functional group.

Algorithms↗

LEF1 is a critical epithelial survival factor during tooth morphogenesis.

LEF1 is a cell-type-specific transcription factor and mediates Wnt signaling pathway by association with its co-activator beta-catenin. Wnt signaling is known to be critical for the specification of cranial neural crest (CNC) cells and may regulate the fate diversity of the CNC during craniofacial morphogenesis. Loss of Lef1 results in arrested tooth development at the late bud stage and LEF1 is required for a relay of a Wnt signaling to a cascade of FGF signaling activities to mediate the epithelial-mesenchymal interaction during tooth morphogenesis. It remains unclear, however, what is the cellular mechanism of LEF1 signaling in regulating tooth morphogenesis. To test the hypothesis that LEF1 signaling regulates the fate of the dental epithelial and the CNC-derived mesenchymal cells during tooth morphogenesis, we investigated and compared the cellular migration, proliferation, and apoptotic activity within the tooth germ between the wild-type and Lef1 null mutant mice. Using the Wnt1-Cre/R26R transgenic system for indelibly marking the progenies of CNC cells, we show that there is no CNC migration defect in the Lef1 null mutant mice, indicating that the arrest in tooth development is not the result of shortage of the CNC contribution into the first branchial arch in the Lef1 mutant. Furthermore, there is no alteration in cell proliferation or condensation of the CNC-derived dental mesenchyme in the Lef1 null mutant, suggesting that LEF1 may not affect the cell cycle progression of the multipotential CNC cells during tooth morphogenesis. Importantly, apoptotic activity is significantly increased within the dental epithelium in the Lef1 null mutant mice. As the result of this increased cell death, the bud stage tooth germ fails to advance to the cap stage in the absence of Lef1. Inhibition of apoptotic activity by FGF4 rescues the tooth development in the Lef1 null mutant. Our studies suggest that LEF1 is a critical survival factor for the dental epithelial cells during tooth morphogenesis.

Animals↗

Suspended sediment removal by vegetative filter strip treating highway runoff.

Structural best management practices (BMPs) are often used to mitigate the impact of storm water runoff on receiving waters. Vegetative filter strips (VFS) are an example of a structural BMP that has been used to treat storm water and highway runoff. Physical factors affecting the performance of VFS include pollutant characteristics, vegetation composition and density, soil properties, and the physical dimensions of the filter strip. In this study, field-suspended sediment data were collected from an experimental VFS treating highway runoff in eastern North Carolina. Field data were used to test the design concepts of the VFS treatment train and to validate a simulation model for evaluating the impact of these physical factors on sediment removal as a function of filter strip length. It was concluded that the experimental filter strip was effective in removing more than 85% of the incoming total suspended sediment (TSS). Simulation results support field observations that a 10-m or longer filter strip can retain most of the medium and large particles (> 8 microm) transported in runoff. Simulations also indicate infiltration loss is largely responsible for the retention of small-size sediment particles (< 8 microm). Saturated hydraulic conductivity and initial water contents have little effects on TSS removal. The condition of vegetative coverage, in particular vegetation density, is another factor affecting the performance of filter strip.

Biodegradation, Environmental↗

Efficient and quick inactivation of SARS coronavirus and other microbes exposed to the surfaces of some metal catalysts.

OBJECTIVE: To study the two metal catalysts Ag/Al2O3 and Cu/Al2O3 that interdict the transmission pathway for SARS and other respiratory infectious diseases. METHODS: Two metal catalysts Ag/Al2O3 and Cu/Al2O3 were pressed into wafers. One hundred microL 10(6) TCID50/mL SARS-CoV, 100 microL 10(6) PFU/mL recombinant baculovirus expressing hamster's prion protein (haPrP) protein and roughly 10(6) E. coli were slowly dropped onto the surfaces of the catalyst wafers and exposed for 5 and 20 min, respectively. After eluted from the surfaces of wafers, the infectivity of viruses and propagation of bacteria were measured. The expression of PrP protein was determined by Western blot. The morphological changes of bacteria were observed by electronic microscopy. RESULTS: After exposure to the catalysts surfaces for 5 and 20 min, the infectivity of SARS-CoV in Vero cells and baculovirus in Sf9 cells dropped down to a very low and undetectable level, and no colony was detected using bacteria culture method. The expression of haPrP protein reduced to 21.8% in the preparation of Sf9 cells infected with recombinant baculovirus exposed for 5 min and was undetectable exposed for 20 min. Bacterial membranes seemed to be cracked and the cytoplasm seemed to be effluent from cell bodies. CONCLUSION: Exposures to the surfaces of Ag/Al2O3 and Cu/Al2O3 destroy the replication and propagation abilities of SARS-CoV, baculovirus and E. coli. Inactivation ability of metal catalysts needs to interact with air, utilizing oxygen molecules in air. Efficiently killing viruses and bacteria on the surfaces of the two metal catalysts has a promising potential for air-disinfection in hospitals, communities, and households.

Aluminum Oxide↗

[Management of intractable epistaxis and bleeding points localization].

OBJECTIVE: To investigate the common nasal bleeding points and the management of intractable epistaxis. METHODS: The bleeding points and its correlation with age distribution, surgical techniques as well as its effects were studied retrospectively in 92 patients, in whom the bleeding points were not found by routine nasal endoscopy and the hemorrhage was not controlled with standard nasal packing. RESULTS: The bleeding points were found in the following different sites: superior wall of inferior nasal meatus (56.5%, 52/92), olfactory cleft of nasal septum (27.2%, 25/92), posterosuperior wall of middle nasal meatus (8.7%, 8/92) and uncertain (7.6%, 7/92). The results showed that the bleeding points had correlation with age. Epistaxis was well controlled by electrocoagulation in 83 cases, gelfoam packing in 8 cases, and transcatheter maxillary artery embolization in 1 case. There were no complications during a followed-up for 1 - 3 months after management. Among the 92 cases, the numbers of treatment needed to stop bleeding were 82 cases (89.1%) after 1 time of treatment, 9 cases (9.8%) after 2 times and in one case (1.1%) after 4 times. CONCLUSIONS: Endoscopy combined with displacement of the middle and inferior turbinate gives good visualization and direct management of the deeply-sited bleeding points, which were difficult in localization. The combined method provides an effective and safe way to control intractable epistaxis.

Adolescent↗

Preparation of monoclonal antibodies against prion proteins with full-length hamster PrP.

OBJECTIVE: To prepare the PrP specific monoclonal antibodies (mAbs) that can be used for the detection of mammalian prions and study of pathogenesis of prion diseases. METHODS: Several BALB/c mice were immunized with recombinant hamster prion protein (HaPrP). Three hybridoma cell lines designated as B7, B9, and B10, secreting monoclonal antibodies against HaPrP, were established by hybridoma technique. The mAbs reactivities were evaluated with ELISA, Western blot, and immunohistochemistry. RESULTS: The mAbs produced by these cell lines reacted well with different recombinant hamster PrP proteins. Western blot analyses showed that mAbs B7 and B9 reacted with PrPSc from the scrapie-infected animals after proteinase K digestion with three glycosylated forms. The mAbs exhibited cross-reactivity with various PrPC from several other mammalian species, including humans and cattles. Immunohistochemistry assays confirmed that mAbs B7 and B9 could recognize not only extracellular but also intracellular PrPsSc. CONCLUSION: The mAbs of prion protein are successfully generated by hybridoma technique and can be applied for the diagnosis of prion associated diseases.

Animals↗

Sequence and peptide map of guinea pig aquaporin 0.

PURPOSE: Hyperbaric oxygen-treated guinea pigs serve as a useful animal model of nuclear cataract. To understand the structure and function of major intrinsic proteins in this model, the primary sequence and major posttranslational modifications to guinea pig aquaporin 0 (AQP0) were determined. METHODS: The cDNA encoding guinea pig AQP0 was amplified by PCR, cloned and sequenced. After protein enrichment from guinea pig lens tissue, the protein sequence and the posttranslational modifications to AQP0 were determined by using combined chemical cleavage, trypsin and pepsin digestion with matrix assisted laser desorption/ionization mass spectrometry or capillary liquid chromatography tandem mass spectrometry. RESULTS: The primary structure of AQP0 was determined from the DNA sequence and the translated sequence confirmed by mass spectrometry. Serine 235 was identified to be the major phosphorylation site. CONCLUSIONS: Significant sequence homology was observed between species including putative regulatory sites of phosphorylation and pH regulation. These data form a foundation of information from which to begin assessing posttranslational modifications in cataract models.

Amino Acid Sequence↗

Preformulation studies to meet the challenges in the manufacture of betaine solid dosage form.

The objectives were (1). to perform solid-state characterization of anhydrous betaine (A) and betaine monohydrate (M), (2). to develop a pressure differential scanning calorimetric (DSC) technique for the quantification of M when present as a minor component in a mixture with A and, (3). to study the effect of annealing of A on the kinetics of A --> M transition. X-ray powder diffractometer (XRD), DSC, thermogravimetric analyzer (TGA), and an automated moisture sorption apparatus were used to characterize the phases. DSC at an elevated pressure of 200 psi enabled quantification of M in mixtures of A and M. Humidity-controlled TGA allowed study of the kinetics of A --> M transition. Automated moisture studies showed that A has a strong tendency to sorb water (at RH >or= 20%, 25 degrees C) and convert to M. When M was subjected to DSC at ambient pressure, the endotherms due to dehydration and vaporization of water overlapped. Pressure DSC enabled separation of these two thermal events. In mixtures of A and M, the enthalpy of dehydration (deltaH(d)) of M could be used for its quantification. A linear relationship was obtained when deltaH(d) was plotted as a function of the weight fraction of M in the mixture. The limits of detection and quantification of M in A were 0.15% and 1.5% w/w, respectively. The kinetics of water uptake by the annealed as well as the unannealed A, could be best described by the Avrami-Erofeev model (three-dimensional nucleation and growth). The calculated rate constant (k) of unannealed A (0.075 +/- 0.002 min(-1)) was significantly higher than that of annealed A (0.052 +/- 0.004 min(-1)). DSC at elevated pressure was a sensitive technique for quantification of M when present as a mixture with A. Annealing of A decelerated the A --> M phase transition reaction, possibly by increasing the degree of crystallinity of A.

Betaine↗

Identification of diesel front sound source based on continuous wavelet transform.

Acoustic signals from diesel engines contain useful information but also include considerable noise components. To extract information for condition monitoring purposes, continuous wavelet transform (CWT) is used for the characterization of engine acoustics. This paper first reviews CWT characteristics represented by short duration transient signals. Wavelet selection and CWT are then implemented and wavelet transform is used to analyze the major sources of the engine front's exterior radiation sound. The research provides a reliable basis for engineering practice to reduce vehicle sound level. Comparison of the identification results of the measured acoustic signals with the identification results of the measured surface vibration showed good agreement.

Algorithms↗

Dynamic analyses of PrP and PrP(Sc) in brain tissues of golden hamsters infected with scrapie strain 263K revealed various PrP forms.

OBJECTIVE: To expatiate dynamic changes in hamsters infected with scrapie strain 263K, to observe the presence and aggravation of various forms of PrP and PrP(Sc) during incubation period, and to probe primarily the relationship between the onset of clinic manifestations and the presence of different PrP(Sc) forms. METHODS: Hamster-adapted scrapie strain 263K was intracerebrally inoculated into hamsters. Different forms of PrP and PrP(Sc) were monitored dynamically by Western blot and immuno-histochemical assays. The presence of scrapie-associated fibril (SAF) was assayed by electron microscopy analysis (EM) and immuno-golden EM. RESULTS: PrP(Sc) was initially detected in the brain tissues of the animals in 20 days post-inoculation by immunohistochemistry and 40 days with Western blot. Quantitative evaluations revealed that the amounts of PrP and PrP(Sc) in brain tissues increased along with the incubation. Several high and low molecular masses of PrP were seen in the brains of the long-life span infected animals. Deglycosylation assays identified that the truncated PrP in the infected brains showed similar glycosylation patterns as the full-length PrP. The presence of short fragments was seemed to relate with the onset of clinical conditions. CONCLUSION: These results indicate that infectious agents exist and accumulate in central nerve system prior to the onset of the illness. Various molecular patterns of PrP(Sc) may indwell in brain tissues during the infection.

Animals↗

Comparison study on clinical and neuropathological characteristics of hamsters inoculated with scrapie strain 263K in different challenging pathways.

OBJECTIVE: To understand the infectious characteristics of a hamster-adapted scrapie strain 263K with five different routes of infection including intracerebral (i.c.), intraperitoneal (i.p.), intragastrical (i.g.), intracardiac and intramuscular (i.m.) approaches. METHODS: Hamsters were infected with crude- or fine-prepared brain extracts. The neuropathological changes, PrP(Sc) deposits, and patterns of PK-resistant PrP were analyzed by HE stain, immnunohistochemistry (IHC) assay and Western blot. Reactive gliosis and neuron loss were evaluated by glial fibrillary acidic protein (GFAP) and neuron specific enolase (NSE) specific IHC. RESULTS: The animals inoculated in i.m. and i.p. ways with crude PrP(Sc) extracts showed clinical signs at the average incubation of 69.2 +/- 2.8 and 65.5 +/- 3.9 days. Inoculation in i.c. and intracardiac ways with fine PrP(Sc) extracts (0.00035 g) caused similar, but relative long incubation of around 90 days. Only one out of eight hamsters challenged in i.g. way with low dosage (0.01 g) became ill after a much longer incubation (185 d), while all animals (4/4) with high dosage (0.04 g) developed clinical signs 105 days postinfection. The most remarkable spongiform degeneration and PrP(Sc) deposits were found in brain stem among the five challenge groups generally. The number of GFAP-positive astrocytes increased distinctly in brain stems in all infection groups, while the number of NSE-positive cells decreased significantly in cerebrum, except i.c. group. The patterns of PK-resistant PrP in brains were basically identical among the five infection routes. CONCLUSION: Typical TSE could be induced in hamsters by inoculating strain 263K in the five infection ways. The incubation periods in bioassays depend on infective dosage, administrating pathway and preparation of PrP(Sc). The neuropathological changes and PrP(Sc) deposits seem to be related with regions and inoculating pathways.

Administration, Oral↗

Cranial neural crest-derived mesenchymal proliferation is regulated by Msx1-mediated p19(INK4d) expression during odontogenesis.

Neural crest cells are multipotential progenitors that contribute to various cell and tissue types during embryogenesis. Here, we have investigated the molecular and cellular mechanism by which the fate of neural crest cell is regulated during tooth development. Using a two- component genetic system for indelibly marking the progeny of neural crest cells, we provide in vivo evidence of a deficiency of CNC-derived dental mesenchyme in Msx1 null mutant mouse embryos. The deficiency of the CNC results from an elevated CDK inhibitor p19(INK4d) activity and the disruption of cell proliferation. Interestingly, in the absence of Msx1, the CNC-derived dental mesenchyme misdifferentiates and possesses properties consistent with a neuronal fate, possibly through a default mechanism. Attenuation of p19(INK4d) in Msx1 null mutant mandibular explants restores mitotic activity in the dental mesenchyme, demonstrating the functional significance of Msx1-mediated p19(INK4d) expression in regulating CNC cell proliferation during odontogenesis. Collectively, our results demonstrate that homeobox gene Msx1 regulates the fate of CNC cells by controlling the progression of the cell cycle. Genetic mutation of Msx1 may alternatively instruct the fate of these progenitor cells during craniofacial development.

Animals↗

Timing of odontogenic neural crest cell migration and tooth-forming capability in mice.

The mammalian tooth develops through sequential and reciprocal interactions between cranial neural crest (CNC)- derived ectomesenchymal cells and the stomadial epithelium. Classic tissue recombination studies demonstrated that premigratory CNC cells and CNC-derived ectomesenchymal cells possess odontogenic capacity and can respond to oral epithelial signals to form a tooth, suggesting that the CNC cells contributing to odontogenic tissue are not prespecified. Here we show that, in mice, CNC cells have populated the forming first branchial arch before the 9-somite stage and continue to migrate into the arch by the 13-somite stage. Grafts of the first arch from the 10-somite embryo or earlier yielded membranous bone and cysts but no teeth after subrenal culture. However, grafts of the first arch with its dorsally adjacent tissue containing migrating neural crest cells from the same age embryos gave rise to teeth. In contrast, teeth formed in first arch grafts that do not contain migrating neural crest cells from embryos with 12 or more somites. Interestingly, the acquisition of tooth forming capability in the first arch coincides with the onset of Fgf8 expression in the oral epithelium. These results suggest that there exists a population of odontogenic neural crest cells that migrates into the first arch between the 10- and 12-somite stages. These cells either possess odontogenic potential and are able to initiate tooth development, or can respond to odontogenic signals derived from the oral epithelium to support tooth formation.

Animals↗

Conditional inactivation of Tgfbr2 in cranial neural crest causes cleft palate and calvaria defects.

Cleft palate and skull malformations represent some of the most frequent congenital birth defects in the human population. Previous studies have shown that TGFbeta signaling regulates the fate of the medial edge epithelium during palatal fusion and postnatal cranial suture closure during skull development. It is not understood, however, what the functional significance of TGFbeta signaling is in regulating the fate of cranial neural crest (CNC) cells during craniofacial development. We show that mice with Tgfbr2 conditional gene ablation in the CNC have complete cleft secondary palate, calvaria agenesis, and other skull defects with complete phenotype penetrance. Significantly, disruption of the TGFbeta signaling does not adversely affect CNC migration. Cleft palate in Tgfbr2 mutant mice results from a cell proliferation defect within the CNC-derived palatal mesenchyme. The midline epithelium of the mutant palatal shelf remains functionally competent to mediate palatal fusion once the palatal shelves are placed in close contact in vitro. Our data suggests that TGFbeta IIR plays a crucial, cell-autonomous role in regulating the fate of CNC cells during palatogenesis. During skull development, disruption of TGFbeta signaling in the CNC severely impairs cell proliferation in the dura mater, consequently resulting in calvaria agenesis. We provide in vivo evidence that TGFbeta signaling within the CNC-derived dura mater provides essential inductive instruction for both the CNC- and mesoderm-derived calvarial bone development. This study demonstrates that TGFbeta IIR plays an essential role in the development of the CNC and provides a model for the study of abnormal CNC development.

Animals↗

Developmental expression of Smad1-7 suggests critical function of TGF-beta/BMP signaling in regulating epithelial-mesenchymal interaction during tooth morphogenesis.

Members of the transforming growth factor-beta family (e.g. TGF-beta, BMP and activin) are critical regulators of tooth morphogenesis. The basic TGF-beta signaling engine consists of a receptor complex that activates Smads and a Smad-containing complex that controls transcription of the downstream target genes. Little is known about the expression of endogenous Smads during tooth morphogenesis. Using a cRNA probe or antibody which specifically recognizes the expression of each Smad molecule, we provide a comprehensive endogenous Smad expression analysis during tooth morphogenesis. BMP signaling is transmitted through Smad1 and 5 which are first expressed within the dental lamina and later expand into condensed dental mesenchyme at the bud stage. As tooth development advances into the cap and bell stage, BMP signaling Smads are strongly localized within the inner enamel epithelium (IEE) and cranial neural crest derived dental mesenchyme (DM), indicating their critical role in regulating epithelial-mesenchyme interaction during tooth morphogenesis. Smad2 and 3 are responsible for transmitting TGF-beta/activin signaling and show unique expression patterns during tooth morphogenesis. They are localized within the nuclei of both IEE and DM, suggesting that TGF-beta-activated Smads are critical for regulating tooth development. Smad4, the common Smad, is expressed in both dental epithelium and mesenchyme throughout all stages of tooth morphogenesis. The expression of inhibitory Smads (Smad6 and 7) largely overlaps with receptor regulated Smads, indicating that negative feedback on BMP/TGF-beta signaling is critical throughout all stages of tooth morphogenesis. Our results suggest that both receptor-regulated and inhibitory Smads are important regulators of tooth morphogenesis. The selective activation of Smad, as indicated by nucleartranslocation, may suggest selective activation of different members of the TGF-beta superfamily during tooth development.

Animals↗