PubMed Health⌕ Search

Biomedical subjects

Junming Sun

Publications and source records attributed to Junming Sun.

6 recordsLinked to original sources
PubMed2006

Engineered complex emulsion system: toward modulating the pore length and morphological architecture of mesoporous silicas.

In the complex alkane/P123/TEOS/H2O emulsion system, an emulsion engineering method to modulate pore length and morphological architecture of mesoporous materials has been built. With fine tuning of the synthetic parameters (e.g., the composition of the synthetic mixtures, temperature, stirring, etc.), a series of chemically significant mesostructures (i.e., short-pore SBA-15 materials) with tunable pore length and morphological architecture have been successfully constructed. The effects of alkane solubilizates on pore length and particle morphology are discussed. The resulting short-pore materials would have potential applications in the fields of adsorption/separation of biomolecules and inclusion chemistry of guest species, etc.

Journal Article↗
PubMed2006

Toward monodispersed silver nanoparticles with unusual thermal stability.

A novel in situ autoreduction route has been developed, by which monodispersed silver nanoparticles with tunable sizes could be easily fabricated on silica-based materials, especially inside the channels of mesoporous silica (MPS). 13C CP/MAS NMR spectroscopy was employed to monitor the whole assembly process. It was demonstrated that the amino groups of APTS (aminopropyltriethoxyl silane)-modified MPS can be used to anchor formaldehyde to form novel reducing species (NHCH2OH), on which Ag(NH3)2NO3 could be in situ reduced. Monodispersed silver nanoparticles were thus obtained. In situ XRD and in situ TEM experiments were used to investigate and compare the thermal stabilities of silver nanoparticles on the external surface of silica gels (unconfined) and those located inside the channels of SBA-15 (confined). It was observed that unconfined silver nanoparticles tended to agglomerate at low temperatures (i.e., lower than 773 K). The aggregation of silver nanoparticles became more serious at 773 K. However, for those confined silver nanoparticles, no coarsening process was observed at 773 K, much higher than its Tammann temperature (i.e., 617 K). Only when the treating temperature was higher than 873 K could the agglomeration of those confined silver nanoparticles happen with time-varying via the Ostwald ripening process. The confinement of mesopores played a key role in improving the thermal stabilities of silver nanoparticles (stable up to 773 K without any observable coarsening), which is essential to the further investigations on their chemical (e.g., catalytic) properties.

Journal Article↗
PubMed2006

Ultrafast enzyme immobilization over large-pore nanoscale mesoporous silica particles.

By finely tuning the TEOS/P123 molar ratio of the octane/water/P123/TEOS quadruple emulsion system and by controlling the synthesis conditions, an ultrafine emulsion system was isolated, under the confinement of which, nanoscale silica particles with ordered large mesopores (approximately 13 nm) have been successfully constructed; the obtained mesoporous silica particles have an unusual ultrafast enzyme adsorption speed and the amount of enzyme that can be immobilized is larger than that of conventional mesoporous silica, which has potential applications in the fast separation of biomolecules.

Adsorption↗
PubMed2006

Large-pore mesoporous SBA-15 silica particles with submicrometer size as stationary phases for high-speed CEC separation.

A new mesoporous sphere-like SBA-15 silica was synthesized and evaluated in terms of its suitability as stationary phases for CEC. The unique and attractive properties of the silica particle are its submicrometer particle size of 400 nm and highly ordered cylindrical mesopores with uniform pore size of 12 nm running along the same direction. The bare silica particles with submicrometer size have been successfully employed for the normal-phase electrochromatographic separation of polar compounds with high efficiency (e.g., 210,000 for thiourea), which is matched well with its submicrometer particle size. The Van Deemeter plot showed the hindrance to mass transfer because of the existence of pore structure. The lowest plate height of 2.0 microm was obtained at the linear velocity of 1.1 mm/s. On the other hand, because of the relatively high linear velocity (e.g., 4.0 mm/s) can be generated, high-speed separation of neutral compounds, anilines, and basic pharmaceuticals in CEC with C18-modified SBA-15 silica as stationary phases was achieved within 36, 60, and 34 s, respectively.

Chromatography↗
PubMed2004

Unusual mesoporous SBA-15 with parallel channels running along the short axis.

Submicrometer-sized mesoporous silica SBA-15 with cuboidlike morphology has been prepared by using excess amounts of decane as cosolvent in the presence of NH4F. The channels of the resulting material run parallel to the short axis of the cuboid-like SBA-15. It has also been found that the materials have a well-ordered channel structure with pore size ca. 12 nm.

Journal Article↗