Biomedical subjects

Just Jensen

Publications and source records attributed to Just Jensen.

8 recordsLinked to original sources

PubMed2026

Discovering common and population-specific QTLs for leaf rust resistance in different Barley populations.

Multi-population GWAS lead to identification of common and population-specific QTLs for leaf rust resistance in barley. Genome-wide association studies (GWAS) are a powerful tool for detecting genetic markers associated with traits of interest. However, these studies are typically restricted to a single population, and transferability of identified marker effects across populations is challenged by population differences in linkage, allele frequencies, epistatic effects, and environmental context. When comparing GWAS results between populations, a lack of overlapping signals is often interpreted as a lack of common quantitative trait loci (QTLs), although such discrepancies may result from differences in statistical power to detect signals. In barley (Hordeum vulgare L.), where genetic leaf rust resistance is rapidly overcome by evolving pathogens, identification of cross-population robust and potentially transferable resistance loci is a key task. Here, we present a mixed model approach for multi-population GWAS that estimates correlated marker effects in multiple populations and use this to test for significant effects across and within populations. Applying this model to four barley breeding populations revealed both common and population-specific QTL effects for leaf rust resistance, including loci colocalizing with known Rph genes and novel regions with plausible candidate genes. Multi-population GWAS increased power, revealing signals not detected by GWAS within populations. We categorized the reported QTLs into three groups based on marker-associated allele effects: (1) consistent effect direction across populations, (2) differing effect direction across populations, and (3) present in a single population. The study highlights the transferability and limitations of leaf rust resistance QTLs across different barley populations and provides a general statistical framework to support robust marker-assisted selection across populations.

Quantitative Trait Loci↗

PubMed2026

Deep soil layers show the most pronounced genetic variation in wheat root length.

Wheat is one of the most important cereals worldwide, yet significant gaps remain in our understanding of genetic variability in root traits, especially those associated with deeper rooting that support resource acquisition in challenging environments. Root traits are typically controlled by many genes with small effects and often display low heritability. Our aim was to develop a statistical approach to analyse root variation across soil depth and to determine where genetic differences in root intensity are most detectable. An experiment was conducted at the RadiMax semi-field facility, which is designed to measure deep root systems. Five years of phenotypic data recorded each June produced observations from 1500 rows. Each row captured root intensity across the soil profile from 0.6 m to 2.6 m, enabling detailed analysis of vertical root distribution. Across the five years, 513 winter wheat cultivars were grown in the facility, and among those 409 were genotyped with SNP chips. Depth-resolved regression models with random coefficients were used to quantify genetic and non-genetic variation in root intensity across soil depths, while accounting for spatial variation between rows. Random variation within rows was found to be constant across depths. The models showed that genetic variance for cumulative root intensity increased substantially below 1.1 m, with the deepest layers exhibiting the largest differences between wheat lines. Narrow-sense heritability of point measurements peaked at approximately 1.5 m ([Formula: see text]).

Genetic variability↗

PubMedDate not supplied

Prediction error variance and expected response to selection, when selection is based on the best predictor - for Gaussian and threshold characters, traits following a Poisson mixed model and survival traits.

In this paper, we consider selection based on the best predictor of animal additive genetic values in Gaussian linear mixed models, threshold models, Poisson mixed models, and log normal frailty models for survival data (including models with time-dependent covariates with associated fixed or random effects). In the different models, expressions are given (when these can be found - otherwise unbiased estimates are given) for prediction error variance, accuracy of selection and expected response to selection on the additive genetic scale and on the observed scale. The expressions given for non Gaussian traits are generalisations of the well-known formulas for Gaussian traits - and reflect, for Poisson mixed models and frailty models for survival data, the hierarchal structure of the models. In general the ratio of the additive genetic variance to the total variance in the Gaussian part of the model (heritability on the normally distributed level of the model) or a generalised version of heritability plays a central role in these formulas.

Analysis of Variance↗

PubMedDate not supplied

On the need for a control line in selection experiments: a likelihood analysis.

The question of whether selection experiments ought to include a control line, as opposed to investing all facilities in a single selected line, is addressed using a likelihood perspective. The consequences of using a control line are evaluated under two scenarios. In the first one, environmental trend is modeled and inferred from the data. In this case, a control line is shown to be highly beneficial in terms of the efficiency of inferences about heritability and response to selection. In the second scenario, environmental trend is not modeled. One can imagine that a previous analysis of the experimental data had lent support to this decision. It is shown that in this situation where a control line may seem superfluous, inclusion of a control line can result in minor gains in efficiency if a high selection intensity is practiced in the selected line. Further, if there is a loss, it is moderately small. The results are verified to hold under more complicated data structures via Monte Carlo simulation. For completeness, divergent selection designs are also reviewed, and inferences based on a conditional and full likelihood approach are contrasted.

Computer Simulation↗

PubMedDate not supplied

Multivariate Bayesian analysis of Gaussian, right censored Gaussian, ordered categorical and binary traits using Gibbs sampling.

A fully Bayesian analysis using Gibbs sampling and data augmentation in a multivariate model of Gaussian, right censored, and grouped Gaussian traits is described. The grouped Gaussian traits are either ordered categorical traits (with more than two categories) or binary traits, where the grouping is determined via thresholds on the underlying Gaussian scale, the liability scale. Allowances are made for unequal models, unknown covariance matrices and missing data. Having outlined the theory, strategies for implementation are reviewed. These include joint sampling of location parameters; efficient sampling from the fully conditional posterior distribution of augmented data, a multivariate truncated normal distribution; and sampling from the conditional inverse Wishart distribution, the fully conditional posterior distribution of the residual covariance matrix. Finally, a simulated dataset was analysed to illustrate the methodology. This paper concentrates on a model where residuals associated with liabilities of the binary traits are assumed to be independent. A Bayesian analysis using Gibbs sampling is outlined for the model where this assumption is relaxed.

Bayes Theorem↗

PubMedDate not supplied

A comparison of bivariate and univariate QTL mapping in livestock populations.

This study presents a multivariate, variance component-based QTL mapping model implemented via restricted maximum likelihood (REML). The method was applied to investigate bivariate and univariate QTL mapping analyses, using simulated data. Specifically, we report results on the statistical power to detect a QTL and on the precision of parameter estimates using univariate and bivariate approaches. The model and methodology were also applied to study the effectiveness of partitioning the overall genetic correlation between two traits into a component due to many genes of small effect, and one due to the QTL. It is shown that when the QTL has a pleiotropic effect on two traits, a bivariate analysis leads to a higher statistical power of detecting the QTL and to a more precise estimate of the QTL's map position, in particular in the case when the QTL has a small effect on the trait. The increase in power is most marked in cases where the contributions of the QTL and of the polygenic components to the genetic correlation have opposite signs. The bivariate REML analysis can successfully partition the two components contributing to the genetic correlation between traits.

Animals↗

PubMedDate not supplied

Mixture model for inferring susceptibility to mastitis in dairy cattle: a procedure for likelihood-based inference.

A Gaussian mixture model with a finite number of components and correlated random effects is described. The ultimate objective is to model somatic cell count information in dairy cattle and to develop criteria for genetic selection against mastitis, an important udder disease. Parameter estimation is by maximum likelihood or by an extension of restricted maximum likelihood. A Monte Carlo expectation-maximization algorithm is used for this purpose. The expectation step is carried out using Gibbs sampling, whereas the maximization step is deterministic. Ranking rules based on the conditional probability of membership in a putative group of uninfected animals, given the somatic cell information, are discussed. Several extensions of the model are suggested.

Algorithms↗

PubMedDate not supplied

Relationship between sperm viability as determined by flow cytometry and nonreturn rate of dairy bulls.

A newly developed flow cytometric method for determination of sperm concentration and viability was tested in an insemination trial with cryopreserved bull sperm to establish the relationship between sperm viability and nonreturn rates. Semen for experimental inseminations was produced from 157 young sires (114 Holstein and 43 Jersey), each contributing 4 experimental semen collections. Straws containing approximately 15 x 10(6) motile sperm before freezing were used in 118,680 experimental inseminations performed by 254 artificial insemination technicians in 6352 Danish herds. Statistical analysis based on 44,946 experimental first inseminations showed that the major part (95.4%) of variation in the 56-day nonreturn rate (NRR56) was residual. Only 0.38% of the total variation in NRR56 was due to bulls and differences between ejaculate within bull. However, bulls were preselected, and a relatively high insemination dose was used. Correlations between sperm viability as assessed by flow cytometry and NRR56 was slightly lower than observed for microscopic assessment of sperm motility. However, flow cytometry makes it possible to achieve an objective and precise determination of sperm viability. It was therefore possible to calculate the effect on NRR56 provided selection of semen is based on the flow cytometric method. Three freezing extenders were used in this experiment, but a significant difference in NRR56 was not observed. Flow cytometric results for 1 extender (Biociphos Plus) indicated poorer sperm survival during postthaw incubation compared with Triladyl extender with whole and with clarified egg yolk.

Animals↗