PubMed Health⌕ Search

Biomedical subjects

Justin E Molloy

Publications and source records attributed to Justin E Molloy.

18 recordsLinked to original sources

Calcium regulates scallop muscle by changing myosin flexibility.

Muscle myosins are molecular motors that convert the chemical free energy available from ATP hydrolysis into mechanical displacement of actin filaments, bringing about muscle contraction. Myosin cross-bridges exert force on actin filaments during a cycle of attached and detached states that are coupled to each round of ATP hydrolysis. Contraction and ATPase activity of the striated adductor muscle of scallop is controlled by calcium ion binding to myosin. This mechanism of the so-called "thick filament regulation" is quite different to vertebrate striated muscle which is switched on and off via "thin filament regulation" whereby calcium ions bind to regulatory proteins associated with the actin filaments. We have used an optically based single molecule technique to measure the angular disposition adopted by the two myosin heads whilst bound to actin in the presence and absence of calcium ions. This has allowed us to directly observe the movement of individual myosin heads in aqueous solution at room temperature in real time. We address the issue of how scallop striated muscle myosin might be regulated by calcium and have interpreted our results in terms of the structures of smooth muscle myosin that also exhibit thick filament regulation.

Actins↗

The MTIP-myosin A complex in blood stage malaria parasites.

Parasites of the Apicomplexa phylum use an actomyosin motor to drive invasion of host cells. The motor complex is located at the parasite's periphery between the plasma membrane and an inner membrane complex. A crucial component of this complex is myosin tail domain interacting protein (MTIP) identified in the murine malaria parasite Plasmodium yoelii. Here, we show that MTIP is expressed in Plasmodium falciparum merozoites, localises to the periphery of the cell and is present in a complex with myosin A. The MTIP-myosin A tail interaction has a Kd of 235 nM and calcium ions do not play a role in modulating the binding affinity of the two molecules, despite reports of a predicted EF-hand in MTIP. Antibodies to MTIP were used to immobilise the MTIP-myosin A complex, allowing actin binding and motility to be examined. Measurement of actin filament velocities powered by myosin A revealed a velocity of 3.51 microm s(-1), a speed comparable to fast muscle myosins. A short peptide derived from the tail of myosin A (C-MyoA) bound to MTIP and was able to disrupt the association of MTIP and myosin A in parasite lysates. C-MyoA peptidomimetic compounds that disrupt the MTIP-myosin A interaction are predicted to inhibit parasite motility and host cell invasion, which may be targets for new therapeutic approaches.

Animals↗

Single molecule measurements and biological motors.

Recent technological advances in lasers and optical detectors have enabled a variety of new, single molecule technologies to be developed. Using intense and highly collimated laser light sources in addition to super-sensitive cameras, the fluorescence of single fluorophores can now be imaged in aqueous solution. Also, laser optical tweezers have enabled the piconewton forces produced by pair of interacting biomolecules to be measured directly. However, for a researcher new to the field to begin to use such techniques in their own research might seem a daunting prospect. Most of the equipment that is in use is custom-built. However, most of the equipment is essence fairly simple and the aim of this article is to provide an entry point to the field for a newcomer. It focuses mainly on those practical aspects which are not particularly well covered in the literature, and aims to provide an overview of the field as a whole with references and web links to more detailed sources elsewhere. Indeed, the opportunity to publish an article such as this on the Internet affords many new opportunities (and more space!) for presenting scientific ideas and information. For example, we have illustrated the nature of optical trap data with an interactive Java simulation; provided links to relevant web sites and technical documents, and included a large number of colour figures and plots. Our group's research focuses on molecular motors, and the bias of this article reflects this. It turns out that molecular motors have been a paradigm (or prototype) for single molecule research and the field has seen a rapid development in the techniques. It is hoped that the methods described here will be broadly applicable to other biological systems.

Actomyosin↗

A model of stereocilia adaptation based on single molecule mechanical studies of myosin I.

We have used an optical tweezers-based apparatus to perform single molecule mechanical experiments using the unconventional myosins, Myo1b and Myo1c. The single-headed nature and slow ATPase kinetics of these myosins make them ideal for detailed studies of the molecular mechanism of force generation by acto-myosin. Myo1c exhibits several features that have not been seen using fast skeletal muscle myosin II. (i) The working stroke occurs in two, distinct phases, producing an initial 3 nm and then a further 1.5 nm of movement. (ii) Two types of binding interaction were observed: short-lived ATP-independent binding events that produced no movement and longer-lived, ATP-dependent events that produced a full working stroke. The stiffness of both types of interaction was similar. (iii) In a new type of experiment, using feedback to apply controlled displacements to a single acto-myosin cross-bridge, we found abrupt changes in force during attachment of the acto-Myo1b cross-bridge, a result that is consistent with the classical 'T2' behaviour of single muscle fibres. Given that these myosins might exhibit the classical T2 behaviour, we propose a new model to explain the slow phase of sensory adaptation of the hair cells of the inner ear.

Actins↗

Myo1c is designed for the adaptation response in the inner ear.

The molecular motor, Myo1c, a member of the myosin family, is widely expressed in vertebrate tissues. Its presence at strategic places in the stereocilia of the hair cells in the inner ear and studies using transgenic mice expressing a mutant Myo1c that can be selectively inhibited implicate it as the mediator of slow adaptation of mechanoelectrical transduction, which is required for balance. Here, we have studied the structural, mechanical and biochemical properties of Myo1c to gain an insight into how this molecular motor works. Our results support a model in which Myo1c possesses a strain-sensing ADP-release mechanism, which allows it to adapt to mechanical load.

Adaptation, Biological↗

The spatial and temporal dynamics of pleckstrin homology domain binding at the plasma membrane measured by imaging single molecules in live mouse myoblasts.

Pleckstrin homology (PH) domains act to target proteins to the plasma membrane and intracellular vesicles by binding to specific phosphoinositol phospholipids. We have investigated the binding kinetics of PH domains found in the tail region of the molecular motor, myosin X. Using total internal reflection fluorescence microscopy, we observed binding and release of individual PH domains fused to green fluorescent protein at the plasma membrane of living cells. Individual spots of light corresponding to single fluorescently tagged molecules were imaged onto a sensitive camera system, and digital image processing was then used to identify each fluorophore and store its trajectory in time and space. The PH domains bound with an apparent on-rate of 0.03 microm(-1) microm(-2) s(-1) and a detachment rate constant of 0.05 s(-1). The average residency time of the domains at the plasma membrane was about 20s. We found very limited movement of the membrane-bound PH domains in the mouse myoblast cells that we studied. This implies that the PH domains must either be attached to the cytoskeleton or corralled in a lipid compartment. Localization of the PH domains together with their rapid detachment rate is probably important in controlling the response of myosin X to signaling events and in regulating its cellular function.

Animals↗

Promoter binding, initiation, and elongation by bacteriophage T7 RNA polymerase. A single-molecule view of the transcription cycle.

A single-molecule transcription assay has been developed that allows, for the first time, the direct observation of promoter binding, initiation, and elongation by a single RNA polymerase (RNAP) molecule in real-time. To promote DNA binding and transcription initiation, a DNA molecule tethered between two optically trapped beads was held near a third immobile surface bead sparsely coated with RNAP. By driving the optical trap holding the upstream bead with a triangular oscillation while measuring the position of both trapped beads, we observed the onset of promoter binding, promoter escape (productive initiation), and processive elongation by individual RNAP molecules. After DNA template release, transcription re-initiation on the same DNA template is possible; thus, multiple enzymatic turnovers by an individual RNAP molecule can be observed. Using bacteriophage T7 RNAP, a commonly used RNAP paradigm, we observed the association and dissociation (k(off)= 2.9 s(-1)) of T7 RNAP and promoter DNA, the transition to the elongation mode (k(for) = 0.36 s(-1)), and the processive synthesis (k(pol) = 43 nt s(-1)) and release of a gene-length RNA transcript ( approximately 1200 nt). The transition from initiation to elongation is much longer than the mean lifetime of the binary T7 RNAP-promoter DNA complex (k(off) > k(for)), identifying a rate-limiting step between promoter DNA binding and promoter escape.

DNA↗

Load-dependent kinetics of force production by smooth muscle myosin measured with optical tweezers.

Muscle contraction is driven by the cyclical interaction of myosin with actin, coupled with ATP hydrolysis. Myosin attaches to actin, forming a crossbridge that produces force and movement as it tilts or rocks into subsequent bound states before finally detaching. It has been hypothesized that the kinetics of one or more of these mechanical transitions are dependent on load, allowing muscle to shorten quickly under low load, but to sustain tension economically, with slowly cycling crossbridges under high load conditions. The idea that muscle biochemistry depends on mechanical output is termed the 'Fenn effect'. However, the molecular details of how load affects the kinetics of a single crossbridge are unknown. Here, we describe a new technique based on optical tweezers to rapidly apply force to a single smooth muscle myosin crossbridge. The crossbridge produced movement in two phases that contribute 4 nm + 2 nm of displacement. Duration of the first phase depended in an exponential manner on the amplitude of applied load. Duration of the second phase was much less affected by load, but was significantly shorter at high ATP concentration. The effect of load on the lifetime of the bound crossbridge is to prolong binding when load is high, but to accelerate release when load is low or negative.

Adenosine Triphosphate↗

Neck length and processivity of myosin V.

Myosin V is an unconventional myosin that transports cargo such as vesicles, melanosomes, or mRNA on actin filaments. It is a two-headed myosin with an unusually long neck that has six IQ motifs complexed with calmodulin. In vitro studies have shown that myosin V moves processively on actin, taking multiple 36-nm steps that coincide with the helical repeat of actin. This allows the molecule to "walk" across the top of an actin filament, a feature necessary for moving large vesicles along an actin filament bound to the cytoskeleton. The extended neck length of the two heads is thought to be critical for taking 36-nm steps for processive movements. To test this hypothesis we have expressed myosin V heavy meromyosin-like fragments containing 6IQ motifs, as well as ones that shorten (2IQ, 4IQ) or lengthen (8IQ) the neck region or alter the spacing between 3rd and 4th IQ motifs. The step size was proportional to neck length for the 2IQ, 4IQ, 6IQ, and 8IQ molecules, but the molecule with the altered spacing took shorter than expected steps. Total internal reflection fluorescence microscopy was used to determine whether the heavy meromyosin IQ molecules were capable of processive movements on actin. At saturating ATP concentrations, all molecules except for the 2IQ mutant moved processively on actin. When the ATP concentration was lowered to 10 microm or less, the 2IQ mutant demonstrated some processive movements but with reduced run lengths compared with the other mutants. Its weak processivity was also confirmed by actin landing assays.

Actins↗

Combined single-molecule force and fluorescence measurements for biology.

Recent advances in single-molecule techniques allow the application of force to an individual biomolecule whilst simultaneously monitoring its response using fluorescent probes. The effects of applied mechanical load on single-enzyme turnovers, biomolecular interactions and conformational changes can now be studied with nanometer precision and millisecond time resolution.

Biology↗

Visualizing single molecules inside living cells using total internal reflection fluorescence microscopy.

Over the past 10 years, advances in laser and detector technologies have enabled single fluorophores to be visualized in aqueous solution. Here, we describe methods based on total internal reflection fluorescence microscopy (TIRFM) that we have developed to study the behavior of individual protein molecules within living mammalian cells. We have used cultured myoblasts that were transiently transfected with DNA plasmids encoding a target protein fused to green fluorescent protein (GFP). Expression levels were quantified from confocal images of control dilutions of GFP and cells with 1-100 nM GFP were then examined using TIRFM. An evanescent field was produced by a totally internally reflected, argon ion laser beam that illuminated a shallow region (50-100 nm deep) at the glass-water interface. Individual GFP-tagged proteins that entered the evanescent field appeared as individual, diffraction-limited spots of light, which were clearly resolved from background fluorescence. Molecules that bound to the basal cell membrane remained fixed in position for many seconds, whereas those diffusing freely in the cytoplasm disappeared within a few milliseconds. We developed automated detection and tracking methods to recognize and characterize the behavior of single molecules in recorded video sequences. This enabled us to measure the kinetics of photobleaching and lateral diffusion of membrane-bound molecules.

Animals↗

Characterization of three regulatory states of the striated muscle thin filament.

The troponin-tropomyosin-linked regulation of striated muscle contraction occurs through allosteric control by both Ca(2+) and myosin. The thin filament fluctuates between two extreme states: the inactive "off" state and the active "on" state. Intermediate states have been proposed from structural studies and transient kinetic measurements. However, in contrast to the well-characterised, on and off states, the mechanochemical properties of the intermediate states are much less well understood because of the instability of those states. In the present study, we have characterized a myosin-induced intermediate that is stabilized by cross-linking myosin motor domains (S1) to actin filaments (with a maximum of one S1 molecule for 50 actin monomers). A single S1 molecule is known to interact with two adjacent actin monomers. A detailed analysis revealed that thin filaments containing S1 molecules cross-linked to just one actin monomer (actin(1)-S1 complexes) are regulated with a 79% inhibition of the ATPase in the absence of Ca(2+). In contrast, filaments containing S1 molecules cross-linked at two positions, to two adjacent actin monomers (actin(2)-S1 complexes) totally lose their regulation in a highly cooperative manner. This loss of regulation was due both to an enhancement of the ATPase activity without calcium and an inhibition of the ATPase with calcium. Filaments containing actin(2)-S1 complexes, with significant ATPase activity in the absence of calcium (about 50%), did not move on a myosin-coated surface unless calcium was present. This partial uncoupling between the ATPase activity and in vitro motility in the absence of calcium demonstrates that the mechanical steps require actin-myosin contacts, which take place only in the on state and not in the off or intermediate states. These data provide new insights concerning the difference in cooperativity of Ca(2+) regulation that exists between the biochemical and mechanical cycles of the actin-myosin motor.

Actin Cytoskeleton↗

Contractility of single human dermal myofibroblasts and fibroblasts.

Human dermal myofibroblasts, characterised by the expression of alpha-smooth muscle actin, are part of the granulation tissue and implicated in the generation of contractile forces during normal wound healing and pathological contractures. We have compared the contractile properties of single human dermal fibroblasts and human dermal myofibroblasts by culturing them on flexible silicone elastomers. The flexibility of the silicone substratum permits the contractile forces exerted by the cells to be measured [Fray et al., 1998: Tissue Eng. 4:273-283], without changing their expression of alpha-smooth muscle actin. The mean contractile force produced by myofibroblasts (2.2 microN per cell) was not significantly different from that generated by fibroblasts (2.0 microN per cell) when cultured on a substrata with a low elastomer stiffness. Forces produced by fibroblasts were unaffected by increases in elastomer stiffness, but forces measured for myofibroblasts increased to a mean value of 4.1 microN/cell. This was associated with a higher proportion of myofibroblasts being able to produce wrinkles on elastomers of high stiffness compared to fibroblasts. We discuss the force measurements at the single cell level, for both fibroblast and myofibroblasts, in relation to the proposed role of myofibroblasts in wound healing and pathological contractures.

Adult↗

The gated gait of the processive molecular motor, myosin V.

Class V myosins are actin-based molecular motors involved in vesicular and organellar transport. Single myosin V molecules move processively along F-actin, taking several 36-nm steps for each diffusional encounter. Here we have measured the mechanical interactions between mouse brain myosin V and rabbit skeletal F-actin. The working stroke produced by a myosin V head is approximately 25 nm, consisting of two separate mechanical phases (20 + 5 nm). We show that there are preferred myosin binding positions (target zones) every 36 nm along the actin filament, and propose that the 36-nm steps of the double-headed motor are a combination of the working stroke (25 nm) of the bound head and a biased, thermally driven diffusive movement (11 nm) of the free head onto the next target zone. The second phase of the working stroke (5 nm) acts as a gate - like an escapement in a clock, coordinating the ATPase cycles of the two myosin V heads. This mechanism increases processivity and enables a single myosin V molecule to travel distances of several hundred nanometres along the actin filament.

Actins↗

Molecular motors: force and movement generated by single myosin II molecules.

Muscle myosin II is an ATP-driven, actin-based molecular motor. Recent developments in optical tweezers technology have made it possible to study movement and force production on the single-molecule level and to find out how different myosin isoforms may have adapted to their specific physiological roles.

Adenosine Triphosphate↗