Biomedical subjects

Justin Hanes

Publications and source records attributed to Justin Hanes.

17 recordsLinked to original sources

PubMed2010

Sites in the AAV5 capsid tolerant to deletions and tandem duplications.

Gene therapy vectors based on adeno-associated virus (AAV) have shown much promise in clinical trials for the treatment of a variety of diseases. However, the ability to manipulate and engineer the viral surface for enhanced efficiency is necessary to overcome such barriers as pre-existing immunity and transduction of non-target cells that currently limit AAV applications. Although single amino acid changes and peptide insertions at select sites have been explored previously, the tolerance of AAV to small deletions and tandem duplications of sequence has not been globally addressed. Here, we have generated a large, diverse library of >10(5) members containing deletions and tandem duplications throughout the viral capsid of AAV5. Four unique mutants were identified that maintain the ability to form viral particles, with one showing improved transduction on both 293T and BEAS-2B cells. This approach may find potential use for the generation of novel variants with improved and altered properties or in the identification of sites that are tolerant to insertions of targeting ligands.

Amino Acid Sequence↗

PubMed2006

Gene delivery to differentiated neurotypic cells with RGD and HIV Tat peptide functionalized polymeric nanoparticles.

A number of neurodegenerative disorders may potentially be treated by the delivery of therapeutic genes to neurons. Nonviral gene delivery systems, however, typically provide low transfection efficiency in post-mitotic differentiated neurons. To uncover mechanistic reasons for this observation, we compared gene transfer to undifferentiated and differentiated SH-SY5Y cells using polyethylenimine (PEI)/DNA nanocomplexes. Differentiated cells exhibited substantially lower uptake of gene vectors. To overcome this bottleneck, RGD or HIV-1 Tat peptides were attached to PEI/DNA nanocomplexes via poly(ethylene glycol) (PEG) spacer molecules. Both RGD and Tat improved the cellular uptake of gene vectors and enhanced gene transfection efficiency of primary neurons up to 14-fold. RGD functionalization resulted in a statistically significant increase in vector escape from endosomes, suggesting it may improve gene delivery by more than one mechanism.

Biocompatible Materials↗

PubMed2005

Wetting of a particle in a thin film.

When a particle is placed in a thin liquid film on a planar substrate, the liquid either climbs or descends the particle surface to satisfy its wetting boundary condition. Analytical solutions for the film shape, the degree of particle immersion, and the downward force exerted by the wetting meniscus on the particle are presented in the limit of small Bond number. When line tension is significant, multiple solutions for the equilibrium meniscus position emerge. When the substrate is unyielding, a dewetting transition is predicted; that is, it is energetically favorable for the particle to rest on top of the film rather than remain immersed in it. If the substrate can bend, the energy to drive this bending is found in the limits of slow or rapid solid deflection. These results are significant in a wide array of disciplines, including controlled delivery of drugs to pulmonary airways, the probing of liquid film/particle interface properties using particles affixed to AFM tips and the positioning of small particles in thin films to create patterned media.

Models, Theoretical↗

PubMed2005

Enhanced adhesion of ligand-conjugated biodegradable particles to colitic venules.

The expression of certain endothelial cell adhesion molecules (ECAMs) is increased in the vasculature of the inflamed bowel (e.g., colitis), thereby providing an opportunity for targeted drug delivery. We recently demonstrated that biodegradable particles conjugated with ligands to ECAMs exhibit significant selective adhesion to ECAM expressing endothelium. In the present study, we used a murine model of colitis to determine whether poly(lactic acid)-poly(ethylene glycol) particles conjugated with a VCAM-1 ligand (alpha-V) exhibit enhanced adhesion to colitic vasculature. In post-capillary venules of the colon, significantly more alpha-V particles accumulate in colitic mice relative to (i) control mice (i.e., selectivity) and (ii) particles bearing a control ligand (i.e., ligand efficiency). The selectivity and ligand efficiency of alpha-V particles were a function of the total number of particles infused. The highest selectivity observed within our test regime was 3, while ligand efficiency increased linearly with the number of particles injected to a value of 24. This work represents a significant step towards achieving a targeted drug delivery scheme for the treatment of inflammatory bowel disease and indicates that the efficiency of targeting is dependent on the dose regime.

Animals↗

PubMed2005

Real-time multiple-particle tracking: applications to drug and gene delivery.

Complex biological environments, such as the cell cytoplasm or the mucus lining the airways of the lungs, can pose significant barriers to efficient therapeutic drug and gene delivery. Biological barriers are particularly important in controlled drug delivery applications that utilize a large carrier particle, such as a liposome or a polymer micro- or nanosphere. The dynamic transport of particulate drug and gene delivery vehicles through these barriers is poorly understood, having been primarily studied with static methods in the past. Recently, the transport of synthetic drug and gene carriers has been investigated quantitatively with real-time particle tracking technology, providing new insight into particle behavior in complex biological environments that is guiding rational improvements in particle design. This review briefly highlights basic principles of particle tracking and its application to elucidate important phenomena that limit effective particulate drug and gene delivery.

Biological Transport, Active↗

PubMed2004

Poly(ether-anhydride) dry powder aerosols for sustained drug delivery in the lungs.

A new family of biodegradable ether-anhydride polymers was used to develop microparticles capable of controlled drug release and inhalation as a dry powder. The polymers are composed of various ratios of sebacic acid (SA) (to render the polymer insoluble in water) and poly(ethylene glycol) (PEG) (to reduce particle clearance by macrophages and improve aerosolization). Particle aerodynamic diameter was controlled within the respirable range by producing geometrically large, but low density particles as a first step toward reducing particle adhesion forces that limit efficient aerosolization of dry powders. Particles made from a variety of polymer compositions possessed high emitted doses (>80%) from a Spinhaler dry powder inhaler (DPI). Control over particle surface and bulk properties (surface roughness, surface charge, density and water retention) was achieved by varying the percentage of PEG in the polymer backbone. The addition of 10% PEG into the polymer backbone significantly enhanced deposition in the lower stages of an in vitro lung model following aerosolization from the DPI (fine particle fractions [FPF] reached 30%). Efficient aerosolization from an obsolete DPI combined with the ability to evade phagocytic clearance and provide controlled release of various drug molecules make these particles promising for prolonged drug delivery in the lung.

Aerosols↗

PubMed2004

Model development and numerical simulation of electric-stimulus-responsive hydrogels subject to an externally applied electric field.

Based on a multi-phasic mixture theory with consideration of ionic diffusion and convection, a multi-physic model, called the multi-effect-coupling electric-stimulus (MECe) model, is developed for simulation of responsive behavior of the electric-sensitive hydrogels when they are immersed into a bathing solution subject to an externally applied electric field. In the developed model, with chemo-electro-mechanical coupling effects, the convection-diffusion equations for concentration distribution of diffusive ions incorporate the influence of electric potential. The electroneutrality condition is replaced by the Poisson equation for distribution of electric potential. The steady and transient analyses of hydrogel deformation are easily carried out by the continuity and momentum equations of the mixture phase. Further, the computational domain of the present model covers both the hydrogel and the surrounding solution. In order to solve the present mathematical model consisting of multi-field coupled nonlinear partial differential governing equations, a hierarchical iteration technique is proposed and a meshless Hermite-Cloud method (HCM) is employed. The steady-state simulation of the electric-stimulus responsive hydrogel is numerically conducted when it is subjected to an externally applied electric field. The hydrogel deformation and the ionic concentrations as well as electric potentials of both the hydrogel and external solution are investigated. The parameter influences on the swelling behaviors of the hydrogel are also discussed in detail. The simulating results are in good agreement with the experimental data and they validate the presently developed model.

Biosensing Techniques↗

PubMed2003

Leukocyte-inspired biodegradable particles that selectively and avidly adhere to inflamed endothelium in vitro and in vivo.

We exploited leukocyte-endothelial cell adhesion chemistry to generate biodegradable particles that exhibit highly selective accumulation on inflamed endothelium in vitro and in vivo. Leukocyte-endothelial cell adhesive particles exhibit up to 15-fold higher adhesion to inflamed endothelium, relative to noninflamed endothelium, under in vitro flow conditions similar to that present in blood vessels, a 6-fold higher adhesion to cytokine inflamed endothelium relative to non-cytokine-treated endothelium in vivo, and a 10-fold enhancement in adhesion to trauma-induced inflamed endothelium in vivo due to the addition of a targeting ligand. The leukocyte-inspired particles have adhesion efficiencies similar to that of leukocytes and were shown to target each of the major inducible endothelial cell adhesion molecules (E-selectin, P-selectin, vascular cell adhesion molecule 1, and intercellular adhesion molecule 1) that are up-regulated at sites of pathological inflammation. The potential for targeted drug delivery to inflamed endothelium has significant implications for the improved treatment of an array of pathologies, including cardiovascular disease, arthritis, inflammatory bowel disease, and cancer.

Antibodies, Monoclonal↗

PubMed2003

Enhanced viscoelasticity of human cystic fibrotic sputum correlates with increasing microheterogeneity in particle transport.

Current biochemical characterizations of cystic fibrosis (CF) sputum do not address the high degree of microheterogeneity in the rheological properties of the mucosal matrix and only provide bulk-average particle diffusion coefficients. The viscoelasticity of CF sputum greatly reduces the diffusion rates of colloidal particles, limiting the effectiveness of gene delivery to underlying lung cells. We determine diffusion coefficients of hundreds of individual amine-modified and carboxylated polystyrene particles (diameter 100-500 nm) embedded in human CF sputum with 5 nm and 33 ms of spatiotemporal resolution. High resolution multiple particle tracking is used to calculate the effective viscoelastic properties of CF sputum at the micron scale, which we relate to its macroscopic viscoelasticity. CF sputum microviscosity, as probed by 100- and 200-nm particles, is an order of magnitude lower than its macroviscosity, suggesting that nanoparticles dispersed in CF sputum are transported primarily through lower viscosity pores within a highly elastic matrix. Multiple particle tracking provides a non-destructive, highly sensitive method to quantify the high heterogeneity of the mucus pore network. The mean diffusion coefficient becomes dominated by relatively few but fast-moving particles as particle size is reduced from 500 to 100 nm. Neutrally charged particles with a diameter <200 nm undergo more rapid transport in CF sputum than charged particles. Treatment with recombinant human DNase (Pulmozyme) reduces macroviscoelastic properties of CF sputum by up to 50% and dramatically narrows the distribution of individual particle diffusion rates but surprisingly does not significantly alter the ensemble-average particle diffusion rate.

Adolescent↗

PubMed2003

Efficient active transport of gene nanocarriers to the cell nucleus.

The intracellular transport of therapeutic gene carriers is poorly understood, limiting the rational design of efficient new vectors. We used live-cell real-time multiple particle tracking to quantify the intracellular transport of hundreds of individual nonviral DNA nanocarriers with 5-nm and 33-ms resolution. Unexpected parallels between several of nature's most efficient DNA viruses and nonviral polyethylenimine/DNA nanocomplexes were revealed to include motor protein-driven transport through the cytoplasm toward the nucleus on microtubules. Active gene carrier transport led to efficient perinuclear accumulation within minutes. The results provide direct evidence to dispute the common belief that the efficiency of nonviral gene carriers is dramatically reduced because of the need for their relatively slow random diffusion through the cell cytoplasm to the nucleus and, instead, focuses the attention of rational carrier design on overcoming barriers downstream of perinuclear accumulation.

Active Transport, Cell Nucleus↗

PubMed2003

Large porous particle impingement on lung epithelial cell monolayers--toward improved particle characterization in the lung.

PURPOSE: The ability to optimize new formulations for pulmonary delivery has been limited by inadequate in vitro models used to mimic conditions particles encounter in the lungs. The aim is to develop a physiologically-relevant model of the pulmonary epithelial barrier that would allow for quantitative characterization of therapeutic aerosols in vitro. METHODS: Calu-3 human bronchial epithelial cells were cultured on permeable filter inserts under air-interfaced culture (AIC) and liquid-covered culture (LCC) conditions. Calu-3 cells grown under both conditions formed tight monolayers and appeared physiologically similar by SEM and immunocytochemical staining against cell junctional proteins and prosurfactant protein-C. RESULTS: Aerosolized large porous particles (LPP) deposited homogeneously and reproducibly on the cell surface and caused no apparent damage to cell monolayers by SEM and light microscopy. However, monolayers initially grown under LCC conditions showed a significant decrease in barrier properties within the first 90 min after impingement with microparticles, as determined by transepithelial electrical resistance (TEER) measurements and fluorescein-sodium transport. Conversely, AIC grown monolayers showed no significant change in barrier properties within the first 90 min following particle application. A dense mucus coating was found on AIC grown Calu-3 monolayers, but not on LCC grown monolayers, which may protect the cell surface during particle impinging. CONCLUSION: This in vitro model, based on AIC grown Calu-3 cells, should allow a more relevant and quantitative characterization of therapeutic aerosol particles intended for delivery to the tracheobronchial region of the lung or to the nasal passages. Such characterization is likely to be particularly important with therapeutic aerosol particles designed to provide sustained drug release in the lung.

Aerosols↗

PubMed2003

Constitutive model development and micro-structural topology optimisation for nafion hydrogel membranes with ionic clustering.

The deployment of electroactive ionic polymer hydrogel-metal composites in artificial muscle and BioMEMS applications has recently been intensively investigated. In order to analyse their electromechanical responses to externally applied electrical fields, it is critical to develop a constitutive model linking the macro-mechanical moduli with the micro-mechanical characteristics, and to determine the geometric size and shape of the micro-structural cluster and investigate the effect of cluster morphology on the effective electro-elastic moduli of the polymer hydrogels. As a typical ionic polymer-based hydrogel, the Nafion membrane is studied in this work. Based on the Biot poroelasticity theory, a multi-scale constitutive model which includes both macro and micro characteristics is developed using an asymptotic homogenisation method. The effect of water-volume fraction on the effective elastic moduli of the hydrogel membrane is examined for different equivalent weights. Numerical investigations show that the simulated effective constitutive moduli agree well with experimental data. The presently developed constitutive model is thus validated. In order to determine the micro-structural shape of the polymer skeleton subject to fluid pressure, a representative volume element (RVE) is designed by topology optimisation of the periodic microstructures of the Nafion hydrogels, through the minimisation of the electro-elastic interaction energy between the polymer-based fluorocarbon matrix and the surrounding fluid. This optimal RVE correctly predicts the geometric shapes of the clusters.

Compressive Strength↗

PubMed2003

Local immunotherapy with interleukin-2 delivered from biodegradable polymer microspheres combined with interstitial chemotherapy: a novel treatment for experimental malignant glioma.

OBJECTIVE: Local delivery of carmustine (BCNU) from biodegradable polymers prolongs survival against experimental brain tumors. Moreover, paracrine administration of interleukin-2 (IL-2) has been shown to elicit a potent antitumor immune response and to improve survival in animal brain tumor models. We report the use of a novel polymeric microsphere delivery vehicle to release IL-2. We demonstrate both in vitro release of cytokine from the microspheres and histological evidence of the inflammatory response elicited by IL-2 released from the microspheres in the rat brain. These microspheres are used to deliver IL-2, and biodegradable polymer wafers are used to deliver BCNU, directly at the site of an intracranially implanted glioma in the rat. The two agents administered locally show a synergistic effect. METHODS: Fischer 344 rats challenged intracranially with 9L gliosarcoma received an intracranial implant of either empty microspheres or microspheres containing IL-2 (IL-2 MS). Five days later, animals in each group were randomized to receive polymer implants loaded with 0, 3.8, or 10% BCNU at the tumor site. RESULTS: Animals that received the combination of IL-2 MS and 3.8% BCNU polymer (median survival, 28.5 d) or IL-2 MS and 10% BCNU polymer (median survival, 45.5 d) showed significantly improved survival compared with animals that received monotherapy with IL-2 microspheres (median survival, 24 d), 3.8% BCNU polymer (median survival, 24 d), or 10% BCNU polymer (median survival, 32.5 d). Control animals had a median survival of 18 days. The combination of either 3.8 or 10% BCNU polymer with IL-2 MS resulted in 7 and 25% long-term survivors, respectively. CONCLUSION: By showing synergy of IL-2 and BCNU in an animal glioma model and using a reproducible synthetic delivery system for each agent (i.e., one that did not rely on genetically engineered cells or viruses), we hope that the combination of local immunotherapy and chemotherapy can take an important step closer to clinical application in patients with malignant brain tumors.

Animals↗

PubMed2002

Influence of apical fluid volume on the development of functional intercellular junctions in the human epithelial cell line 16HBE14o-: implications for the use of this cell line as an in vitro model for bronchial drug absorption studies.

Air-interfaced culture (AIC) versus liquid-covered culture (LCC) conditions are known to have different effects on the differentiated phenotype of several cell types, including lung epithelial cells. We report the influence of culture conditions such as apical medium volume on the development of intercellular junctions in the human epithelial cell line 16HBE14o-. Immunofluorescence staining of the tight-junctional protein, ZO-1, has revealed its presence in cells grown in both AIC and LCC. However, only LCC-grown cells exhibit protein ZO-1 localized as a zonula-occludens-like regular belt connecting neighboring cells. The presence of typical tight junctions has been confirmed by electron microscopy. Immunostaining for occludin, claudin-1, connexin43, and E-cadherin has demonstrated intercellular junction structures only in the cells in LCC. These morphological findings have been paralleled by higher transepithelial electrical resistance values and similar fluxes of the hydrophilic permeability marker, fluorescein-Na, under LCC compared with AIC conditions. We conclude that the formation of functional 16HBE14o- cell layers requires the presence of an apical fluid volume, in contrast to other culture conditions for airway epithelial cells.

Actins↗

PubMed2002

New polymeric carriers for controlled drug delivery following inhalation or injection.

Inhalation is gaining increasing acceptance as a convenient, reproducible, and non-invasive method of drug delivery to the lung tissue and/or the systemic circulation. However, sustained drug release following inhalation remains elusive, due in part to the lack of appropriate materials designed specifically for use in the lungs to control the release of bioactive compounds. To address this problem, we have synthesized a new family of ether-anhydride copolymers composed entirely of FDA-approved monomers, including polyethylene glycol (PEG). Sebacic acid, a hydrophobic monomer, was copolymerized with PEG in order to produce water-insoluble polymers capable of providing continuous drug release kinetics following immersion in an aqueous environment. Various amounts of PEG (5-50% by mass) were incorporated into the backbone of the new polymers to allow tuning of particle surface properties for potentially enhanced aerosolization efficiency and to decrease particle clearance rates by phagocytosis in the deep lung. The preparation of large porous particles with these new polymers was systematically approached, utilizing central composite design, to develop improved particle physical properties for deep lung delivery. Microparticles containing model drugs were made with sizes suitable for deposition in various regions of the lung following inhalation as a dry powder. Due to such properties as surface erosion (leading to continuous drug release profiles), erosion times ranging from hours to days (allowing control over drug delivery duration), and ability to incorporate up to 50% PEG in their backbone, these new systems may also find application as "stealth" carriers for therapeutic compounds following intravenous injection.

Administration, Inhalation↗

PubMedDate not supplied

Real-time intracellular transport of gene nanocarriers studied by multiple particle tracking.

We used real-time multiple particle tracking to quantitatively characterize the type and rates of transport of gene nanocarriers within live cells. The heterogeneous cytoplasmic transport of polyethylenimine (PEI)/DNA gene carriers was quantified by tracking their mean-square displacements over time and classified into active and nonactive transport populations on the basis of their effective diffusivities versus time. Nonactive gene carriers frequently displayed hop-diffusion trajectories, suggesting a porous cytoplasmic network of flexible biopolymers or sequential attachment and detachment events. Microtubule-dependent active transport of gene carriers resulted in an effective diffusivity 30-fold greater than that of nonactive carriers (at a time scale of 3 s). Compared to nonactive carriers in control cells with intact microtubules, microtubule depolymerization enhanced short-range motion of gene carriers but resulted in similar long-range transport. Multiple particle tracking characterizes gene carrier transport in complex biological environments and, therefore, may be a useful tool in quantifying rate-limiting steps in gene delivery within cells and other biological media.

Animals↗

PubMedDate not supplied

Transport of polymeric nanoparticle gene carriers in gastric mucus.

Nanoparticle transport through mucosal barriers is often restricted owing to mucoadhesion and the highly viscoelastic nature of mucus gels, which may limit efficient drug and gene delivery. We formulated sub-200 nm particulates from poly(d,l-lactic-co-glycolic) acid (PLGA) and the cationic surfactant dimethyldioctadecylammonium bromide (DDAB). Subsequently, anionic DNA was condensed to the surface to obtain gene carriers with transfection rates 50-fold higher than those of naked DNA in vitro. Using the method of multiple particle tracking (MPT), we measured the transport rates of dozens of individual PLGA-DDAB/DNA nanoparticles in real time in reconstituted pig gastric mucus (PGM) that possessed physiologically relevant rheological properties. The average transport rate of PLGA-DDAB/DNA nanoparticles was 10-fold higher than those of similar size polystyrene nanoparticles. Improved transport rates, stability in mucus, and ability to transfect cells make PLGA-DDAB/DNA nanoparticles candidates for mucosal DNA vaccines and gene therapy.

Animals↗