Biomedical subjects

K Abremski

Publications and source records attributed to K Abremski.

At least 19 recordsLinked to original sources

PubMed2000

Human immunodeficiency virus type 1 mutations selected in patients failing efavirenz combination therapy.

Efavirenz is a potent and selective nonnucleoside inhibitor of human immunodeficiency virus type 1 (HIV-1) reverse transcriptase (RT). Nucleotide sequence analyses of the protease and RT genes (coding region for amino acids 1 to 229) of multiple cloned HIV-1 genomes from virus found in the plasma of patients in phase II clinical studies of efavirenz combination therapy were undertaken in order to identify the spectrum of mutations in plasma-borne HIV-1 associated with virological treatment failure. A K103N substitution was the HIV-1 RT gene mutation most frequently observed among plasma samples from patients for whom combination therapy including efavirenz failed, occurring in at least 90% of cases of efavirenz-indinavir or efavirenz-zidovudine (ZDV)-lamivudine (3TC) treatment failure. V108I and P225H mutations were observed frequently, predominantly in viral genomes that also contained other nonnucleoside RT inhibitor (NNRTI) resistance mutations. L100I, K101E, K101Q, Y188H, Y188L, G190S, G190A, and G190E mutations were also observed. V106A, Y181C, and Y188C mutations, which have been associated with high levels of resistance to other NNRTIs, were rare in the patient samples in this study, both before and after exposure to efavirenz. The spectrum of mutations observed in cases of virological treatment failure was similar for patients initially dosed with efavirenz at 200, 400, or 600 mg once a day and for patients treated with efavirenz in combination with indinavir, stavudine, or ZDV-3TC. The proportion of patients carrying NNRTI resistance mutations, usually K103N, increased dramatically at the time of initial viral load rebound in cases of treatment failure after exposure to efavirenz. Viruses with multiple, linked NNRTI mutations, especially K103N-V108I and K103N-P225H double mutants, accumulated more slowly following the emergence of K103N mutant viruses.

Alkynes↗

PubMed1992

Stoichiometry of the Cre recombinase bound to the lox recombining site.

The site-specific recombinase Cre from bacteriophage P1 binds and carries out recombination at a 34 bp lox site. The lox site consists of two 13 bp inverted repeats, separated by an 8 bp spacer region. Both the palindromic nature of the site and the results of footprinting and band shift experiments suggest that a minimum of two Cre molecules bind to a lox site. We report here experiments that demonstrate the absolute stoichiometry of the Cre-lox complex to be one molecule of Cre bound per inverted repeat, or two molecules per lox site.

Base Sequence↗

PubMed1990

DNA specificity of the Cre recombinase resides in the 25 kDa carboxyl domain of the protein.

The Cre protein of bacteriophage P1 is a 38.5 kDa site-specific recombinase that belongs to the Int family of recombination proteins. Cre acts by binding specifically to a 34 base-pair sequence, lox, where it carries out recombination. A limited chymotryptic digest of Cre resulted in two fragments of sizes 25 and 13.5 kDa, respectively. The sequence of the amino terminus of the purified 25 kDa peptide demonstrates that this peptide represents the carboxyl-terminal portion of the Cre protein. A truncated version of the cre gene was constructed which produces only the 25 kDa peptide. The 25 kDa peptide is capable of specific binding to the lox site, but binds at lower affinity than does wild-type Cre. Footprinting with Fe-EDTA indicates that the 25 kDa peptide protects the inverted repeats of the lox site but shows only partial protection of the spacer region. This is in contrast to the footprint obtained with wild-type Cre which protects the entire spacer region.

Amino Acid Sequence↗

PubMed1988

Properties of a mutant Cre protein that alters the topological linkage of recombination products.

The bacteriophage P1 Cre-loxP site-specific recombination system consists of two components: the Cre recombinase protein and the loxP DNA sequence where recombination takes place. We report here on the analysis of a mutation in the cre structural gene that produces a mutant protein with altered recombination properties. The mutant protein, Cre111, carries out recombination at a much slower rate than the wild-type Cre protein. To determine why the reaction is slow, we have examined a number of activities associated with Cre-mediated recombination. Our results indicate that the binding of Cre111 to the loxP site is comparable to wild-type Cre. Furthermore, the rate at which Cre111 resolves Holliday structures, an intermediate in this recombination reaction, is also comparable to wild-type Cre. Thus, DNA binding and resolution of the intermediate are not affected, suggesting that either synapsis, the process of bringing two lox sites together, or the first strand exchange event, could be affected in the mutant protein. The types of DNA products formed following recombination of a supercoiled substrate can reflect mechanisms of synapsis. Wild-type Cre generates mainly topologically unlinked and unknotted circular products. This suggests that the wild-type protein brings two lox sites together in a way that excludes the entanglement of supercoils present in the substrate DNA. In contrast, when Cre111 recombines a supercoiled molecule it generates many complicated catenanes and knotted DNA products. Presumably, the supercoils present in the DNA substrate are being trapped in the reaction products.(ABSTRACT TRUNCATED AT 250 WORDS)

Coliphages↗

PubMed1987

A mutational analysis of the bacteriophage P1 recombinase Cre.

Bacteriophage P1 encodes a 38,600 Mr site-specific recombinase, Cre, that is responsible for reciprocal recombination between sites on the P1 DNA called loxP. Using in vitro mutagenesis 67 cre mutants representing a total of 37 unique changes have been characterized. The mutations result in a wide variety of phenotypes as judged by the varying ability of each mutant Cre protein to excise a lacZ gene located between two loxP sites in vivo. Although the mutations are found throughout the entire cre gene, almost half are located near the carboxyl terminus of the protein, suggesting a region critical for recombinase function. DNA binding assays using partially purified mutant proteins indicate that mutations in two widely separated regions of the protein each result in loss of heparin-resistant complexes between Cre and a loxP site. These results suggest that Cre may contain two separate domains, both of which are involved in binding to loxP.

Amino Acid Sequence↗

PubMed1987

Isolation and characterization of intermediates in site-specific recombination.

Cre, the site-specific recombinase from bacteriophage P1, catalyzes a recombination reaction between specific DNA sequences designated as lox sites. The breakage and rejoining of partners during this recombination process must be highly concerted because it has not been possible to detect intermediates of the reaction with wild-type Cre. Several mutant Cre proteins have been isolated that produce significant amounts of a possible intermediate product of the recombination reaction. The product has been identified as a Holliday structure in which one set of the DNA strands of the recombining partners has been exchanged. Wild-type Cre protein is capable of acting on this structure to form recombinant products, which is consistent with this being an intermediate in the recombination reaction. Characterization of the Holliday structure indicated that one set of strands in the recombining partners was always exchanged preferentially before the other set. In addition, it has been found that certain Cre mutants that are unable to carry out recombination in vitro are able to resolve the intermediate. This suggests that these mutants are defective in a step in the reaction that precedes the formation of the Holliday intermediate.

Coliphages↗

PubMed1986

Linking-number changes in the DNA substrate during Cre-mediated loxP site-specific recombination.

We have examined the linking-number changes that occur during phage P1 Cre-mediated recombination in vitro between two loxP sites. Such recombination reactions can be divided into three types: intramolecular inversion, in which recombination occurs between two loxP sites in opposite orientations on the same DNA substrate; intramolecular excision, where recombination occurs between two loxP sites that are in the same orientation on the DNA substrate; and intermolecular recombination, which occurs between two loxP sites on separate DNA molecules. Our results indicate that inversion changes the linking number of the substrate DNA by two topological turns. With a negatively supercoiled substrate, the product is changed by +2 turns. A relaxed substrate yields products that have been changed by either +2 or -2 turns. For intermolecular reactions, the sum of the linking numbers of each of the two starting circles is equal to the linking number of the dimer circle generated by recombination, and no change occurs in linking number. For intramolecular excision reactions, the data are most consistent, with no change in linking number during recombination. These results are discussed in terms of models for alignment and synapsis of the recombining sites and the mechanism of strand exchange.

Bacteriophages↗

PubMed1986

The role of the loxP spacer region in P1 site-specific recombination.

The lox-Cre site-specific recombination system of bacteriophage P1 is comprised of a site on the DNA where recombination occurs called loxP, and a protein, Cre, which mediates the reaction. The loxP site is 34 base pairs (bp) in length and consists of two 13 bp inverted repeats separated by an 8 bp spacer region. Previously it has been shown that the cleavage and strand exchange of recombining loxP sites occurs within this spacer region. We report here an analysis of various base substitution mutations within the spacer region of loxP, and conclude the following: Homology is a requirement for efficient recombination between recombining loxP sites. There is at least one position within the spacer where a base change drastically reduces recombination even when there is homology between the two recombining loxP sites. When two loxP sites containing symmetric spacer regions undergo Cre-mediated recombination in vitro, the DNA between the sites undergoes both excision and inversion with equal frequency.

Bacterial Proteins↗

PubMed1986

Bacteriophage P1 cre gene and its regulatory region. Evidence for multiple promoters and for regulation by DNA methylation.

The bacteriophage P1 site-specific recombination system consists of two components, a site, loxP, at which recombination occurs, and a recombinase protein, Cre. In this paper, we present the DNA sequence of the cre structural gene and its upstream regulatory region. Analysis of the sequence indicates: (1) that cre encodes a protein of 343 amino acids; (2) that cre and loxP are separated by a 434 base-pair region that contains a 73 amino acid open reading frame, orf1; and (3) that cre and orf1 are oriented with their amino-terminal ends proximal to loxP. We have identified three promoters that are located upstream of the cre structural gene. Their activities range from 7 to 10% of the activity of the galactose operon promoter. The promoter furthest from cre, pR1, contains two Dam methylation sites (5'-G-A-T-C-3') in its -35 region, and is sensitive to Dam methylation. Its transcription is three- to fourfold higher in a dam- host than it is in a dam+ host. The promoter closest to cre, pR3, signals the production of an RNA transcript that functions inefficiently for Cre protein synthesis because it lacks a ribosome recognition site. None of the three cre promoters is sensitive to proteins expressed by the P1 prophage, including the c1 repressor protein. To assess the role of cre in the P1 life-cycle, we isolated cre mutants and studied their behavior in recA+ and recA- hosts. Those studies indicate that Cre is dispensable for viral vegetative growth and lysogeny in a recA+ host, but is required for both processes in a recA- host. The cre requirement for lysogeny suggests that the protein is essential for the cyclization of newly injected terminally redundant virion DNA. The requirement for vegetative growth suggests that Cre also has a role to play in the viral lytic cycle after the viral DNA has been cyclized.

Base Sequence↗

PubMed1986

Bacteriophage P1 Cre-loxP site-specific recombination. Site-specific DNA topoisomerase activity of the Cre recombination protein.

Site-specific recombination in bacteriophage P1 occurs between two loxP sites in the presence of the Cre recombination protein. The structure of the 34-base pair loxP site consists of two 13-base pair inverted repeats separated by an 8-base pair spacer region. A mutation in the loxP site has been constructed which deletes one of the internal bases of the spacer region at the axis of dyad symmetry. This mutant loxP site shows a 10-fold reduction in recombination activity with a wild-type site both in vivo and in vitro. This low level of intramolecular recombination between a wild-type loxP site and the mutant loxP501 site is observed in vitro only when the DNA substrate is supercoiled. The majority of the supercoiled substrate is relaxed by the Cre protein, and on longer incubations, single-stranded nicks accumulate in the DNA. We have determined that these nicks occur in both the wild-type and the mutant sites. The positions of these nicks correspond to the positions of cleavage found during recombination of two wild-type sites, suggesting that the Cre protein is attempting to carry out recombination with the mutant site but most of the time this reaction is abortive. We have determined that the Cre protein relaxes a supercoiled topoisomer of a DNA substrate containing one wild-type site and one mutant site to yield a distribution of topoisomers whose linking numbers differ by steps of one, indicating that Cre can act as a type I topoisomerase.

Base Sequence↗

PubMed1986

The integrase family of site-specific recombinases: regional similarities and global diversity.

A combination of two methods for detecting distant relationships in protein primary sequences was used to compare the site-specific recombination proteins encoded by bacteriophage lambda, phi 80, P22, P2, 186, P4 and P1. This group of proteins exhibits an unexpectedly large diversity of sequences. Despite this diversity, all of the recombinases can be aligned in their C-terminal halves. A 40-residue region near the C terminus is particularly well conserved in all the proteins and is homologous to a region near the C terminus of the yeast 2 mu plasmid Flp protein. This family of recombinases does not appear to be related to any other site-specific recombinases. Three positions are perfectly conserved within this family: histidine, arginine and tyrosine are found at respective alignment positions 396, 399 and 433 within the well-conserved C-terminal region. We speculate that these residues contribute to the active site of this family of recombinases, and suggest that tyrosine-433 forms a transient covalent linkage to DNA during strand cleavage and rejoining.

Amino Acid Sequence↗

PubMed1986

Plasmid map: a microcomputer program for display and storage of plasmid data.

We describe a plasmid map program which runs on an IBM PC microcomputer and facilitates the drawing of circular plasmid maps. The user enters information from the keyboard in the form of restriction enzyme sites, genes and their locations, and other plasmid markers such as promoters, origins, or other sites. This information can then be stored in a file for future reference. The plasmid map can be displayed on the screen, printed on a dot-matrix printer, or plotted on a Hewlett Packard HP7475A plotter.

Base Sequence↗

PubMed1985

Phage P1 Cre-loxP site-specific recombination. Effects of DNA supercoiling on catenation and knotting of recombinant products.

Bacteriophage P1 contains a site-specific recombination system consisting of a site, loxP, and a recombinase protein Cre. We have shown that with purified Cre protein we can carry out recombination between two loxP sites in vitro. When that recombination occurs between two sites in direct orientation on the same DNA molecule, we observed the production of free and catenated circular molecules. In this paper we show that recombination between sites in opposite orientation leads to both knotted and unknotted circular products. We also demonstrate that the production of catenanes and knots is influenced by two factors: (1) supercoiling in the DNA substrate, supercoiled DNA substrates yield significantly more catenated and knotted products than nicked circular substrates; and (2) mutations in the loxP site, a class of mutations have been isolated that carry out recombination but result in a distribution of products in which the ratio of catenanes to free circles is increased over that observed with a wild-type site. A more detailed analysis of the products from recombination between wild-type sites indicates: (1) that the catenanes or knots produced by recombination are both simple and complex; (2) that the ratio of free products to catenanes is independent of the distance between the two directly repeated loxP sites; and (3) that for DNA substrates with four loxP sites significant recombination between non-adjacent sites occurs to give free circular products. These observations provide insights into how two loxP sites are brought together during recombination.

Bacteriophages↗

PubMed1985

Mechanism of strand cleavage and exchange in the Cre-lox site-specific recombination system.

The bacteriophage P1 recombinase Cre mediates site-specific recombination between loxP sites. The loxP site consists of two 13 base-pair inverted repeats separated by an eight base-pair spacer region. When DNA containing the loxP site is incubated with Cre, specific cleavages occur within the spacer region, creating a six base-pair staggered cut. The cuts are centered on the axis of dyad symmetry of the loxP site, resulting in a 5' protruding terminus: 5' A decreases T-G-T-A-T-G C 3' T A-C-A-T-A-C increases G. At the point of cleavage, Cre becomes covalently attached to a 3' PO4, and produces a free 5' OH. A series of experiments were carried out in which a radioactively labeled loxP site is recombined with an unlabeled loxP site to locate the point at which strand exchange takes place during recombination. The points of strand exchange coincide with the sites at which Cre cleavage of the DNA backbone had been detected.

Bacteriophages↗

PubMed1985

Formation of small circular DNA molecules via an in vitro site-specific recombination system.

The Cre-lox site-specific recombination system of bacteriophage P1 has been used to investigate the role of DNA flexibility in recombination. We have determined that a minimal distance of 82 bp must separate two loxP sites located on the same DNA molecule to allow these sites to undergo intramolecular recombination with one another. As a result of recombination, DNA circles as small as 116 bp have been produced. IN addition, we have demonstrated that the nuclease BAL 31 recognizes distortions in the DNA helix resulting from the formation of small DNA circles whose length is not a multiple of the helical repeat.

Base Composition↗

PubMed1984

Site-specific recombination by the bacteriophage P1 lox-Cre system. Cre-mediated synapsis of two lox sites.

The bacteriophage P1-encoded recombinase Cre forms a simple DNA-protein complex at the specific recognition site loxP. Furthermore, Cre is able to mediate a synaptic union of two loxP sites. When two loxP sites are on the same linear DNA molecule, Cre binds the two sites together to form a circular protein-DNA complex. These complexes can be resolved into a linear DNA molecule and a closed circular DNA molecule, the end products of site-specific recombination.

Base Sequence↗

PubMed1984

Bacteriophage P1 site-specific recombination. Purification and properties of the Cre recombinase protein.

Bacteriophage P1 encodes a site-specific recombination system that consists of a site (loxP) at which recombination occurs and a gene, cre, whose protein product is essential for recombination. The loxP-Cre recombination event can be studied in greater detail by the use of an in vitro system that efficiently carries out recombination between two loxP sites. This paper presents a purification and characterization of the Cre protein (Mr = 35,000), which is the only protein required for the in vitro reaction. No high energy cofactors are needed. The purified Cre protein binds to loxP-containing DNA and makes complexes that are resistant to heparin. Cre efficiently converts 70% of the DNA substrate to products and appears to act stoichiometrically. The action of Cre on a loxP2 supercoiled substrate containing two directly repeated loxP sites results in product molecules that are topologically unlinked. Several models to account for the ability of Cre to produce free supercoiled products are discussed.

Amino Acids↗

PubMed1984

Interaction of the bacteriophage P1 recombinase Cre with the recombining site loxP.

The interaction between the P1 recombinase protein Cre and the DNA site at which it acts, loxP, has been studied by using nuclease protection techniques. The region of DNA protected by Cre against nuclease attack by DNase I or neocarzinostatin is a 34-base-pair (bp) region containing two 13-bp inverted repeats separated by an 8-bp spacer region. These protected sequences have previously been shown to be required for efficient Cre-mediated recombination at loxP. The results of the above protection experiments suggest (i) that no more than 34 bp may be required for loxP recombination and (ii) that the asymmetry of loxP recombination is due to the 8-bp spacer sequence. With neocarzinostatin, a specific nucleotide within the 8-bp spacer region is not protected. This nucleotide is located in a 2-bp sequence shown to be involved in a loxP crossover event, suggesting that this region remains exposed after Cre binding. Protection experiments have also been done with loxP sites that have either the left or right inverted repeat deleted. The nuclease protection pattern of these sites reveals that each loxP site consists of two binding domains for Cre, each being composed of one 13-bp inverted repeat and the contiguous 4 bp of the 8-bp spacer region.

Base Sequence↗