Biomedical subjects

K B Mogensen

Publications and source records attributed to K B Mogensen.

3 recordsLinked to original sources

PubMed2005

Lab-on-a-chip with integrated optical transducers.

Taking the next step from individual functional components to higher integrated devices, we present a feasibility study of a lab-on-a-chip system with five different components monolithically integrated on one substrate. These five components represent three main domains of microchip technology: optics, fluidics and electronics. In particular, this device includes an on-chip optically pumped liquid dye laser, waveguides and fluidic channels with passive diffusive mixers, all defined in one layer of SU-8 polymer, as well as embedded photodiodes in the silicon substrate. The dye laser emits light at 576 nm, which is directly coupled into five waveguides that bring the light to five different locations along a fluidic channel for absorbance measurements. The transmitted portion of the light is collected at the other side of this cuvette, again by waveguides, and finally detected by the photodiodes. Electrical read-out is accomplished by integrated metal connectors. To our knowledge, this is the first time that integration of all these components has been demonstrated.

Equipment Design↗

PubMed2004

Measurements of scattered light on a microchip flow cytometer with integrated polymer based optical elements.

Flow cytometry is widely used for analyzing microparticles, such as cells and bacteria. In this paper, we report an innovative microsystem, in which several different optical elements (waveguides, lens and fiber-to-waveguide couplers) are integrated with microfluidic channels to form a complete microchip flow cytometer. All the optical elements, the microfluidic system, and the fiber-to-waveguide couplers were defined in one layer of polymer (SU-8, negative photoresist) by standard photolithography. With only a single mask procedure required, all the fabrication and packaging processes can be finished in one day. Polystyrene beads were measured in the microchip flow cytometer, and three signals (forward scattering, large angle scattering and extinction) were measured simultaneously for each bead. To our knowledge this is the first time forward scattered light and incident light extinction were measured in a microsystem using integrated optics. The microsystem can be applied for analyzing different kinds of particles and cells, and can easily be integrated with other microfluidic components.

Equipment Design↗

PubMed2001

Monolithic integration of optical waveguides for absorbance detection in microfabricated electrophoresis devices.

The fabrication and performance of an electrophoretic separation chip with integrated optical waveguides for absorption detection is presented. The device was fabricated on a silicon substrate by standard microfabrication techniques with the use of two photolithographic mask steps. The waveguides on the device were connected to optical fibers, which enabled alignment free operation due to the absence of free-space optics. A 750 microm long U-shaped detection cell was used to facilitate longitudinal absorption detection. To minimize geometrically induced band broadening at the turn in the U-cell, tapering of the separation channel from a width of 120 down to 30 microm was employed. Electrical insulation was achieved by a 13 microm thermally grown silicon dioxide between the silicon substrate and the channels. The breakdown voltage during operation of the chip was measured to 10.6 kV. A separation of 3.2 microM rhodamine 110, 8 microM 2,7-dichlorofluorescein, 10 microM fluorescein and 18 microM 5-carboxyfluorescein was demonstrated on the device using the detection cell for absorption measurements at 488 nm.

Electrophoresis, Capillary↗