PubMed Health⌕ Search

Biomedical subjects

K E Eriksson

Publications and source records attributed to K E Eriksson.

At least 19 recordsLinked to original sources

A standardized spectrophotometric assay of endoglycanase activities using dyed, amorphous polysaccharides.

This is a new technique to assay virtually any endoglycanase activity where enough polysaccharide material is available to allow for production of the amorphous, dyed beads used as substrates. It allows for a direct comparison of endoglycanase activities between laboratories since dyed beads from at least the most common polysaccharides such as cellulose, xylan, mannan, and chitin are now under development and will soon be commercially available; cellulose beads already are. It is a very sensitive technique and enzyme activities can be measured using a nonsophisticated spectrophotometer.

Anthraquinones↗

Cellobiose dehydrogenase from the fungi Phanerochaete chrysosporium and Humicola insolens. A flavohemoprotein from Humicola insolens contains 6-hydroxy-FAD as the dominant active cofactor.

Cellobiose dehydrogenases (CDH) were purified from cellulose-grown cultures of the fungi Phanerochaete chrysosporium and Humicola insolens. The pH optimum of the cellobiose-cytochrome c oxidoreductase activity of P. chrysosporium CDH was acidic, whereas that of H. insolens CDH was neutral. The absorption spectra of the two CDHs showed them to be typical hemoproteins, but there was a small difference in the visible region. Limited proteolysis between the heme and flavin domains was performed to investigate the cofactors. There was no difference in absorption spectrum between the heme domains of P. chrysosporium and H. insolens CDHs. The midpoint potentials of heme at pH 7.0 were almost identical, and no difference in pH dependence was observed over the range of pH 3-9. The pH dependence of cellobiose oxidation by the flavin domains was similar to that of the native CDHs, indicating that the difference in the pH dependence of the catalytic activity between the two CDHs is because of the flavin domains. The absorption spectrum of the flavin domain from H. insolens CDH has absorbance maxima at 343 and 426 and a broad absorption peak at 660 nm, whereas that of P. chrysosporium CDH showed a normal flavoprotein spectrum. Flavin cofactors were extracted from the flavin domains and analyzed by high-performance liquid chromatography. The flavin cofactor from H. insolens was found to be a mixture of 60% 6-hydroxy-FAD and 40% FAD, whereas that from P. chrysosporium CDH was normal FAD. After reconstitution of the deflavo-proteins it was found that flavin domains containing 6-hydroxy-FAD were clearly active but their cellobiose oxidation rates were lower than those of flavin domains containing normal FAD. Reconstitution of flavin cofactor had no effect on the optimum pH. From these results, it is concluded that the pH dependence is not because of the flavin cofactor but is because of the protein molecule.

Carbohydrate Dehydrogenases↗

Production of ligninolytic enzymes and synthetic lignin mineralization by the bird's nest fungus Cyathus stercoreus.

Production of ligninolytic enzymes and degradation of 14C-ring labeled synthetic lignin by the white-rot fungus Cyathus stercoreus ATCC 36910 were determined under a variety of conditions. The highest mineralization rate for 14C dehydrogenative polymerizates (DHP; 38% 14CO2 after 30 days) occurred with 1 mM ammonium tartrate as nitrogen source and 1% glucose as additional carbon source, but levels of extracellular laccase and manganese peroxidase (MnP) were low. In contrast, 10 mM ammonium tartrate with 1% glucose gave low mineralization rates (10% 14CO2 after 30 days) but higher levels of laccase and manganese peroxidase. Lignin peroxidase was not produced by C. stercoreus under any of the studied conditions. Mn(II) at 11 ppm gave a higher rate of 14C DHP mineralization than 0.3 or 40 ppm, but the highest manganese peroxidase level was obtained with Mn(II) at 40 ppm. Cultivation in aerated static flasks gave rise to higher levels of both laccase and manganese peroxidase compared to the levels in shake cultures. 3,4-Dimethoxycinnamic acid at 500 microM concentration was the most effective inducer of laccase of those tested. The purified laccase was a monomeric glycoprotein having an apparent molecular mass of 70 kDa, as determined by calibrated gel filtration chromatography. The pH optimum and isoelectric point of the purified laccase were 4.8 and 3.5, respectively. The N-terminal amino acid sequence of C. stercoreus laccase showed close homology to the N-terminal sequences determined from other basidiomycete laccases. Information on C. stercoreus, whose habitat and physiological requirements for lignin degradation differ from many other white-rot fungi, expands the possibilities for industrial application of biological systems for lignin degradation and removal in biopulping and biobleaching processes.

Amino Acid Sequence↗

Characterization and heterologous expression of laccase cDNAs from xylem tissues of yellow-poplar (Liriodendron tulipifera).

Four closely related cDNA clones encoding laccase isoenzymes from xylem tissues of yellow-poplar (Ltlacc2.1-4) were identified and sequenced. The inferred yellow-poplar laccase gene products were highly related to one another (79-91% at the amino acid level) and showed significant similarity to other blue copper oxidases, especially with respect to the copper-binding domains. The encoded proteins had N-terminal signal sequences and 17-19 potential N-linked glycosylation sites. The mature proteins were predicted to have molecular masses of ca. 61 kDa (unglycosylated) and high isoelectric points (pI 9.3-9.5). The canonical copper ligands were conserved, with the exception of a Leu residue associated with the axial position of the Type-1 cupric ion. The residue at this position has been proposed to influence the redox potential of Type-1 cupric ions. Northern blot analysis revealed that the yellow-poplar laccase genes are differentially expressed in xylem tissues. The genes were verified as encoding active laccases by heterologous expression in tobacco cells and demonstration of laccase activity in extracts from transformed tobacco cell lines.

Amino Acid Sequence↗

Comparison of fungal laccases and redox mediators in oxidation of a nonphenolic lignin model compound.

Several fungal laccases have been compared for the oxidation of a nonphenolic lignin dimer, 1-(3, 4-dimethoxyphenyl)-2-(2-methoxyphenoxy)propan-1,3-diol (I), and a phenolic lignin model compound, phenol red, in the presence of the redox mediators 1-hydroxybenzotriazole (1-HBT) or violuric acid. The oxidation rates of dimer I by the laccases were in the following order: Trametes villosa laccase (TvL) > Pycnoporus cinnabarinus laccase (PcL) > Botrytis cinerea laccase (BcL) > Myceliophthora thermophila laccase (MtL) in the presence of either 1-HBT or violuric acid. The order is the same if the laccases are used at the same molar concentration or added to the same activity (with ABTS [2, 2'-azinobis (3-ethylbenzothiazoline-6-sulfonic acid)] as a substrate). During the oxidation of dimer I, both 1-HBT and violuric acid were to some extent consumed. Their consumption rates also follow the above order of laccases, i.e., TvL > PcL > BcL > MtL. Violuric acid allowed TvL and PcL to oxidize dimer I much faster than 1-HBT, while BcL and violuric acid oxidized dimer I more slowly than BcL and 1-HBT. The oxidation rate of dimer I is dependent upon both kcat and the stability of the laccase. Both 1-HBT and violuric acid inactivated the laccases, violuric acid to a greater extent than 1-HBT. The presence of dimer I or phenol red in the reaction mixture slowed down this inactivation. The inactivation is mainly due to the reaction of the redox mediator free radical with the laccases. We did not find any relationship between the carbohydrate content of the laccases and their inactivation. When the redox potential of the laccases is in the range of 750 to 800 mV, i.e., above that of the redox mediator, it does not affect kcat and the oxidation rate of dimer I.

Barbiturates↗

Cellobiose dehydrogenase enhances Phanerochaete chrysosporium cellobiohydrolase I activity by relieving product inhibition.

The interaction of cellobiose dehydrogenase (CDH) with cellobiohydrolase I (CBH I) in cellulose-grown cultures of Phanerochaete chrysosporium was investigated to clarify the role of CDH in cellulose degradation. Decomposition of bacterial microcrystalline cellulose by CBH I was enhanced significantly in the presence of the CDH/ferricyanide redox-system compared with CBH I alone. To explain this phenomenon, a model system, using p-nitrophenyl-beta-D-cellobioside as a substrate, was elaborated for measurement of CBH I activity with and without the CDH redox-system. The activity of CBH I for hydrolysis of p-nitrophenyl-beta-D-cellobioside was also enhanced in the presence of the redox system. It was found that Km for hydrolysis of p-nitrophenyl-beta-D-cellobioside by CBH I was lower in the presence than in the absence of the CDH/ferricyanide redox-system, 142 microM and 384 microM, respectively, while no significant difference was observed between the k(cat) values. These results indicate that cellulase activity is enhanced by an increased affinity for p-nitrophenyl-beta-D-cellobioside, rather than by an increased hydrolysis rate. This shows that cellobiose, the hydrolysis product, acts as a competitive inhibitor of the interaction between CBH I and p-nitrophenyl-beta-D-cellobioside. This was confirmed by addition of cellobiose, which was found to competitively inhibit hydrolysis of p-nitrophenyl-beta-D-cellobioside by CBH I in the absence of the CDH redox system, and the Ki value for cellobiose inhibition was estimated to be 65 microM. However, this inhibition did not occur if cellobiose was incubated with CDH before addition of CBH I. It was concluded from these results that the reason for the enhancement of CBH I activity in the presence of the CDH redox system was that it relieves competitive inhibition of cellobiose by its oxidation to cellobionolactone.

Basidiomycota↗

A small-scale method for screening of lignin-degrading microorganisms.

A new method to facilitate rapid screening of lignin-degrading microorganisms was developed. Fungal strains are cultivated in tissue culture plates containing C-ring-labeled dehydrogenation polymerizate (DHP) (synthetic lignin). Evolved CO(2) is trapped in barium-saturated filter paper and is detected by exposing the paper to X-ray film. Analysis of the autoradiograms, carried out by density measurement with an image analysis program, allows for a semiquantitative estimation of the amount of CO(2) evolved. The method is especially useful for screening for new, powerful lignin-degrading strains in both man-made and natural environments. It eliminates the need for special equipment for their cultivation and trapping of CO(2) as well as laborious sample analysis. The method has in this study been used to test three novel fungal isolates and a laccaseless mutant of the basidiomycete Pycnoporus cinnabarinus. Their ligninolytic capacities were compared with those of the potent lignin degrader Ceriporiopsis subvermispora.

Journal Article↗

Molecular analysis of a laccase gene from the white rot fungus Pycnoporus cinnabarinus.

It was recently shown that the white rot basidiomycete Pycnoporus cinnabarinus secretes an unusual set of phenoloxidases when it is grown under conditions that stimulate ligninolysis (C. Eggert, U. Temp, and K.-E. L. Eriksson, Appl. Environ. Microbiol. 62:1151-1158, 1996). In this report we describe the results of a cloning and structural analysis of the laccase-encoding gene (lcc3-1) expressed by P. cinnabarinus during growth under xylidine-induced conditions. The coding region of the genomic laccase sequence, which is preceded by the eukaryotic promoter elements TATA and CAATA, spans more than 2,390 bp. The corresponding laccase cDNA was identical to the genomic sequence except for 10 introns that were 50 to 60 bp long. A sequence analysis indicated that the P. cinnabarinus lcc3-1 product has a Phe residue at a position likely to influence the reduction-oxidation potential of the enzyme's type 1 copper center. The P. cinnabarinus lcc3-1 sequence was most similar to the sequence encoding a laccase from Coriolus hirsutus (level of similarity, 84%).

Amino Acid Sequence↗

Laccase is essential for lignin degradation by the white-rot fungus Pycnoporus cinnabarinus.

The white-rot fungus, Pycnoporus cinnabarinus, provides an excellent model organism to elucidate the controversial role of laccase in lignin degradation. P. cinnabarinus produces laccase in one isoform as the predominant phenoloxidase in ligninolytic cultures, and neither LiP nor MnP are secreted. Yet, P. cinnabarinus degrades lignin very efficiently. In the present work, we show that laccase-less mutants of P. cinnabarinus were greatly reduced in their ability to metabolize 14C ring-labeled DHP. However, 14CO2 evolution in these mutant cultures could be restored to levels comparable to those of the wild-type cultures by addition of purified P. cinnabarinus laccase. This clearly indicates that laccase is absolutely essential for lignin degradation by P. cinnabarinus.

Laccase↗

Localization of cellobiose dehydrogenase in cellulose-grown cultures of Phanerochaete chrysosporium.

To elucidate the function of cellobiose dehydrogenase (CDH) in cellulose degradation by Phanerochaete chrysosporium, production and localization of CDH were investigated and compared with those in shaking and aerated static cultures grown on cellulose. Substantial CDH activity was detected in the medium of the shake cultures after 8 days of incubation, while no CDH activity was detected in the medium of static cultures at any point during the incubation period. Light microscopy clearly showed that many cellulose particles were adsorbed on the surface of the hypha in static cultures, whereas no cellulose particles were absorbed to the hypha is shake cultures. The addition of laminarinase to static cultures was very effective in detaching cellulose particles from the hypha surfaces. Using a potentiometric assay performed with an oxidation-reduction potential electrode, some CDH activity could be detected on the hypha/cellulose complexes in static cultures. Thus, CDH is produced also in static cultures, albeit in lower amounts that in shake cultures, but the enzyme is not released into the medium. It seem likely that the beta-1,3-glucan layer plays an important role in CDH localization and cellulose degradation. Immunocytochemical confocal laser scanning microscopy for the static cultures demonstrated that most CDH was adsorbed on the surface of the cellulose, especially around the cracks, which were formed by the action of cellulases during the course of incubation. From these observations, we conclude a direct participation of CDH in the degradation of cellulose in cooperation with cellulases.

Basidiomycota↗

Forest tree biotechnology.

The forest products industry has traditionally viewed trees as merely a raw, and more or less immutable, natural resource. However, unlike such inanimate resources as metallic ores, trees have the potential to be modified genetically, essentially transmuting lead into gold. Increasingly, modern alchemists are applying the tools of biotechnology in efforts to reduce the biological constraints on forest productivity. Several new methodologies being used to address problems in forest biology are described with respect to their potential impact on forest tree improvement. In addition to addressing problems inherent to the current use of trees for production of pulp and paper or solid wood products, genetic manipulation of trees brings with it the potential to create new industries based on the novel characteristics of transgenic trees, e.g. trees containing transgenes to detoxify specific pollutants could be used in the remediation of sites contaminated with hazardous wastes. Efforts to modify trees through biotechnology are in their infancy, and this review seeks to outline the underpinnings of what will undoubtedly be an area of increased emphasis in the next millennium.

Biotechnology↗

Microorganisms and enzymes involved in the degradation of plant fiber cell walls.

One of natures most important biological processes is the degradation of lignocellulosic materials to carbon dioxide, water and humic substances. This implies possibilities to use biotechnology in the pulp and paper industry and consequently, the use of microorganisms and their enzymes to replace or supplement chemical methods is gaining interest. This chapter describes the structure of wood and the main wood components, cellulose, hemicelluloses and lignins. The enzyme and enzyme mechanisms used by fungi and bacteria to modify and degrade these components are described in detail. Techniques for how to assay for these enzyme activities are also described. The possibilities for biotechnology in the pulp and paper industry and other fiber utilizing industries based on these enzymes are discussed.

Bacteria↗

Microorganisms as an alternative source of protein.

Demand for human food and animal feed proteins from nonconventional sources has increased, particularly in developing countries. Microbial protein is one such source. It is desirable because it is amenable to controlled intensive cultivation and is less dependent on variations in climate, weather, and soil. Microbial proteins must be evaluated for nutritive value, safety, and economic considerations before mass production is undertaken.

Animals↗

Enhanced production of cellobiose dehydrogenase in cultures of Phanerochaete chrysosporium supplemented with bovine calf serum.

The enzyme cellobiose dehydrogenase (CDH), produced by many wood-degrading fungi has, in recent years, attracted considerable interest for its possible role in both cellulose and lignin degradation. To characterize the enzyme better and to identify its role in the degradation of wood and wood components, it is desirable to produce it in higher amounts. We report here that the addition of bovine calf serum to cellulose-grown cultures of Phanerochaete chrysosporium enhances the production of certain enzymes, CDH in particular. The highest CDH production was obtained with 45 ml of serum/litre of medium added on day 3 or 4. The resultant CDH yield was approx. 700-800 units/litre, which was 3.5-4 times higher than that in cultures without serum. Serum addition also enhanced the production of beta-glucosidase. However, the impact on CDH production was the most dramatic. The enhanced enzyme production cannot be explained by increased rates of spore germination, simple nutrient effects or cofactor effects. Fractionation of serum by Cohn's fractionation technique showed that the albumin (BSA) fraction had almost the same effect as whole serum. However, purified BSA had less effect than crude BSA (fraction V of Cohn's fractions), suggesting that an additional factor, probably a protease inhibitor in serum, also contributed to the effect of serum.

Animals↗

A fungal metabolite mediates degradation of non-phenolic lignin structures and synthetic lignin by laccase.

Lignin peroxidase is generally considered to be a primary catalyst for oxidative depolymerization of lignin by white-rot fungi. However, some white-rot fungi lack lignin peroxidase. Instead, many produce laccase, even though the redox potentials of known laccases are too low to directly oxidize the non-phenolic components of lignin. Pycnoporus cinnabarinus is one example of a laccase-producing fungus that degrades lignin very efficiently. To overcome the redox potential barrier, P. cinnabarinus produces a metabolite, 3-hydroxyanthranilate that can mediate the oxidation of how non-phenolic substrates by laccase. This is the first description of how laccase might function in a biological system for the complete depolymerization of lignin.

Benzyl Alcohols↗

The ligninolytic system of the white rot fungus Pycnoporus cinnabarinus: purification and characterization of the laccase.

The white rot fungus Pycnoporus cinnabarinus was characterized with respect to its set of extracellular phenoloxidases. Laccase was produced as the predominant extracellular phenoloxidase in conjunction with low amounts of an unusual peroxidase. Neither lignin peroxidase nor manganese peroxidase was detected. Laccase was produced constitutively during primary metabolism. Addition of the most effective inducer, 2,5-xylidine, enhanced laccase production ninefold without altering the isoenzyme pattern of the enzyme. Laccase purified to apparent homogeneity was a single polypeptide having a molecular mass of approximately 81,000 Da, as determined by calibrated gel filtration chromatography, and a carbohydrate content of 9%. The enzyme displayed an unusual behavior on isoelectric focusing gels; the activity was split into one major band (pI, 3.7) and several minor bands of decreasing intensity which appeared at regular, closely spaced intervals toward the alkaline end of the gel. Repeated electrophoresis of the major band under identical conditions produced the same pattern, suggesting that the laccase was secreted as a single acidic isoform with a pI of about 3.7 and that the multiband pattern was an artifact produced by electrophoresis. This appeared to be confirmed by N-terminal amino acid sequencing of the purified enzyme, which yielded a single sequence for the first 21 residues. Spectroscopic analysis indicated a typical laccase active site in the P. cinnabarinus enzyme since all three typical Cu(II)-type centers were identified. Substrate specificity and inhibitor studies also indicated the enzyme to be a typical fungal laccase. The N-terminal amino acid sequence of the P. cinnabarinus laccase showed close homology to the N-terminal sequences determined for laccases from Trametes versicolor, Coriolus hirsutus, and an unidentified basidiomycete, PM1. The principal features of the P. cinnabarinus enzyme system, a single predominant laccase and a lack of lignin- or manganese-type peroxidase, make this organism an interesting model for further studies of possible alternative pathways of lignin degradation by white rot fungi.

Amino Acid Sequence↗

Laccase-mediated formation of the phenoxazinone derivative, cinnabarinic acid.

The phenoxazinone chromophore occurs in a variety of biological systems, including numerous pigments and certain antibiotics. It also appears to form as part of a mechanism to protect mammalian tissue from oxidative damage. During cultivation of the basidiomycete, Pycnoporus cinnabarinus, a red pigment was observed to accumulate in the culture medium. It was identified as the phenoxazinone derivative, cinnabarinic acid (CA). Laccase was the predominant extracellular phenoloxidase activity in P. cinnabarinus cultures. In vitro studies showed that CA was formed after oxidation of the precursor, 3-hydroxyanthranilic acid (3-HAA), by laccases. Moreover, oxidative coupling of 3-HAA to form CA was also demonstrated for the mammalian counterpart of laccase, the blue copper oxidase, ceruloplasmin.

3-Hydroxyanthranilic Acid↗