Biomedical subjects

K H Kalk

Publications and source records attributed to K H Kalk.

At least 19 recordsLinked to original sources

PubMed2003

Structure and mechanism of a bacterial haloalcohol dehalogenase: a new variation of the short-chain dehydrogenase/reductase fold without an NAD(P)H binding site.

Haloalcohol dehalogenases are bacterial enzymes that catalyze the cofactor-independent dehalogenation of vicinal haloalcohols such as the genotoxic environmental pollutant 1,3-dichloro-2-propanol, thereby producing an epoxide, a chloride ion and a proton. Here we present X-ray structures of the haloalcohol dehalogenase HheC from Agrobacterium radiobacter AD1, and complexes of the enzyme with an epoxide product and chloride ion, and with a bound haloalcohol substrate mimic. These structures support a catalytic mechanism in which Tyr145 of a Ser-Tyr-Arg catalytic triad deprotonates the haloalcohol hydroxyl function to generate an intramolecular nucleophile that substitutes the vicinal halogen. Haloalcohol dehalogenases are related to the widespread family of NAD(P)H-dependent short-chain dehydrogenases/reductases (SDR family), which use a similar Ser-Tyr-Lys/Arg catalytic triad to catalyze reductive or oxidative conversions of various secondary alcohols and ketones. Our results reveal the first structural details of an SDR-related enzyme that catalyzes a substitutive dehalogenation reaction rather than a redox reaction, in which a halide-binding site is found at the location of the NAD(P)H binding site. Structure-based sequence analysis reveals that the various haloalcohol dehalogenases have likely originated from at least two different NAD-binding SDR precursors.

Amino Acid Sequence↗

PubMed2003

Detergent organisation in crystals of monomeric outer membrane phospholipase A.

The structure of the detergent in crystals of outer membrane phospholipase A (OMPLA) has been determined using neutron diffraction contrast variation. Large crystals were soaked in stabilising solutions, each containing a different H(2)O/D(2)O contrast. From the neutron diffraction at five contrasts, the 12 A resolution structure of the detergent micelle around the protein molecule was determined. The hydrophobic beta-barrel surfaces of the protein molecules are covered by rings of detergent. These detergent belts are fused to neighbouring detergent rings forming a continuous three-dimensional network throughout the crystal. The thickness of the detergent layer around the protein varies from 7-20 A. The enzyme's active site is positioned just outside the hydrophobic detergent zone and is thus in a proper location to catalyse the hydrolysis of phospholipids in a natural membrane. Although the dimerisation face of OMPLA is covered with detergent, the detergent density is weak near the exposed polar patch, suggesting that burying this patch in the enzyme's dimer interface may be energetically favourable. Furthermore, these results indicate a crucial role for detergent coalescence during crystal formation and contribute to the understanding of membrane protein crystallisation.

Bacterial Outer Membrane Proteins↗

PubMed2001

Crystallization of quinohaemoprotein alcohol dehydrogenase from Comamonas testosteroni: crystals with unique optical properties.

Quinohaemoprotein alcohol dehydrogenase from Comamonas testosteroni is a functional electron-transfer protein containing both a haem c and a pyrroloquinoline quinone cofactor. The enzyme has been crystallized at 277 K using polyethylene glycol 6000 as precipitant. The crystals belong to space group C2, with unit-cell parameters a = 98.1, b = 74.3, c = 92.2 A, beta = 105.9 degrees. A native data set with a resolution of 2.44 A resolution has been collected. The approximate orientation of the haem group with respect to the unit-cell axes has been determined from the optical properties of the crystals.

Alcohol Oxidoreductases↗

PubMed2001

Structural investigations of calcium binding and its role in activity and activation of outer membrane phospholipase A from Escherichia coli.

Outer membrane phospholipase A (OMPLA) is an integral membrane enzyme that catalyses the hydrolysis of phospholipids. Enzymatic activity is regulated by reversible dimerisation and calcium-binding. We have investigated the role of calcium by X-ray crystallography. In monomeric OMPLA, one calcium ion binds between two external loops (L3L4 site) at 10 A from the active site. After dimerisation, a new calcium-binding site (catalytic site) is formed at the dimer interface in the active site of each molecule at 6 A from the L3L4 calcium site. The close spacing and the difference in calcium affinity of both sites suggests that the L3L4 site may function as a storage site for a calcium ion, which relocates to the catalytic site upon dimerisation. A sequence alignment demonstrates conservation of the catalytic calcium site but evolutionary variation of the L3L4 site. The residues in the dimer interface are conserved as well, suggesting that all outer membrane phospholipases require dimerisation and calcium in the catalytic site for activity. For this family of phospholipases, we have characterised a consensus sequence motif (YTQ-X(n)-G-X(2)-H-X-SNG) that contains conserved residues involved in dimerisation and catalysis.

Amino Acid Motifs↗

PubMed2001

X-ray structure of bovine pancreatic phospholipase A2 at atomic resolution.

Using synchrotron radiation and a CCD camera, X-ray data have been collected from wild-type bovine pancreatic phospholipase A(2) at 100 K to 0.97 A resolution allowing full anisotropic refinement. The final model has a conventional R factor of 9.44% for all reflections, with a mean standard uncertainty for the positional parameters of 0.031 A as calculated from inversion of the full positional least-squares matrix. At 0.97 A resolution, bovine pancreatic phospholipase A(2) reveals for the first time that its rigid scaffolding does not preclude flexibility, which probably plays an important role in the catalytic process. Functionally important regions (the interfacial binding site and calcium-binding loop) are located at the molecular surface, where conformational variability is more pronounced. A cluster of 2-methyl-2,4-pentanediol molecules is present at the entrance of the hydrophobic channel that leads to the catalytic site and mimics the fatty-acid chains of a substrate analogue. Bovine pancreatic phospholipase A(2) at atomic resolution is compared with previous crystallographic structures and with models derived from nuclear magnetic resonance studies. Given the high structural similarity among extracellular phospholipases A(2) observed so far at lower resolution, the results arising from this structural analysis are expected to be of general validity for this class of enzymes.

Animals↗

PubMed2001

Structural investigations of the active-site mutant Asn156Ala of outer membrane phospholipase A: function of the Asn-His interaction in the catalytic triad.

Outer membrane phospholipase A (OMPLA) from Escherichia coli is an integral-membrane enzyme with a unique His-Ser-Asn catalytic triad. In serine proteases and serine esterases usually an Asp occurs in the catalytic triad; its role has been the subject of much debate. Here the role of the uncharged asparagine in the active site of OMPLA is investigated by structural characterization of the Asn156Ala mutant. Asparagine 156 is not involved in maintaining the overall active-site configuration and does not contribute significantly to the thermal stability of OMPLA. The active-site histidine retains an active conformation in the mutant notwithstanding the loss of the hydrogen bond to the asparagine side chain. Instead, stabilization of the correct tautomeric form of the histidine can account for the observed decrease in activity of the Asn156Ala mutant.

Alanine↗

PubMed2000

Crystallographic studies of the interactions of Escherichia coli lytic transglycosylase Slt35 with peptidoglycan.

Lytic transglycosylases catalyze the cleavage of the beta-1, 4-glycosidic bond between N-acetylmuramic acid (MurNAc) and N-acetylglucosamine (GlcNAc) in peptidoglycan with concomitant formation of a 1,6-anhydro bond in the MurNAc residue. To understand the reaction mechanism of Escherichia coli lytic transglycosylase Slt35, three crystal structures have been determined of Slt35 in complex with two different peptidoglycan fragments and with the lytic transglycosylase inhibitor bulgecin A. The complexes define four sugar-binding subsites (-2, -1, +1, and +2) and two peptide-binding sites in a large cleft close to Glu162. The Glu162 side chain is between the -1 and +1 sugar-binding sites, in agreement with a function as catalytic acid/base. The complexes suggest additional contributions to catalysis from Ser216 and Asn339, residues which are conserved among the MltB/Slt35 lytic transglycosylases.

Acetylglucosamine↗

PubMed1999

The cyclization mechanism of cyclodextrin glycosyltransferase (CGTase) as revealed by a gamma-cyclodextrin-CGTase complex at 1.8-A resolution.

The enzyme cyclodextrin glycosyltransferase is closely related to alpha-amylases but has the unique ability to produce cyclodextrins (circular alpha(1-->4)-linked glucoses) from starch. To characterize this specificity we determined a 1.8-A structure of an E257Q/D229N mutant cyclodextrin glycosyltransferase in complex with its product gamma-cyclodextrin, which reveals for the first time how cyclodextrin is competently bound. Across subsites -2, -1, and +1, the cyclodextrin ring binds in a twisted mode similar to linear sugars, giving rise to deformation of its circular symmetry. At subsites -3 and +2, the cyclodextrin binds in a manner different from linear sugars. Sequence comparisons and site-directed mutagenesis experiments support the conclusion that subsites -3 and +2 confer the cyclization activity in addition to subsite -6 and Tyr-195. On this basis, a role of the individual residues during the cyclization reaction cycle is proposed.

Bacillus↗

PubMed1999

1.68-A crystal structure of endopolygalacturonase II from Aspergillus niger and identification of active site residues by site-directed mutagenesis.

Polygalacturonases specifically hydrolyze polygalacturonate, a major constituent of plant cell wall pectin. To understand the catalytic mechanism and substrate and product specificity of these enzymes, we have solved the x-ray structure of endopolygalacturonase II of Aspergillus niger and we have carried out site-directed mutagenesis studies. The enzyme folds into a right-handed parallel beta-helix with 10 complete turns. The beta-helix is composed of four parallel beta-sheets, and has one very small alpha-helix near the N terminus, which shields the enzyme's hydrophobic core. Loop regions form a cleft on the exterior of the beta-helix. Site-directed mutagenesis of Asp(180), Asp(201), Asp(202), His(223), Arg(256), and Lys(258), which are located in this cleft, results in a severe reduction of activity, demonstrating that these residues are important for substrate binding and/or catalysis. The juxtaposition of the catalytic residues differs from that normally encountered in inverting glycosyl hydrolases. A comparison of the endopolygalacturonase II active site with that of the P22 tailspike rhamnosidase suggests that Asp(180) and Asp(202) activate the attacking nucleophilic water molecule, while Asp(201) protonates the glycosidic oxygen of the scissile bond.

Amino Acid Sequence↗

PubMed1999

Crystal structures of intermediates in the dehalogenation of haloalkanoates by L-2-haloacid dehalogenase.

The L-2-haloacid dehalogenase from the 1,2-dichloroethane-degrading bacterium Xanthobacter autotrophicus GJ10 catalyzes the hydrolytic dehalogenation of small L-2-haloalkanoates to their corresponding D-2-hydroxyalkanoates, with inversion of the configuration at the C(2) atom. The structure of the apoenzyme at pH 8 was refined at 1.5-A resolution. By lowering the pH, the catalytic activity of the enzyme was considerably reduced, allowing the crystal structure determination of the complexes with L-2-monochloropropionate and monochloroacetate at 1.7 and 2.1 A resolution, respectively. Both complexes showed unambiguous electron density extending from the nucleophile Asp(8) to the C(2) atom of the dechlorinated substrates corresponding to a covalent enzyme-ester reaction intermediate. The halide ion that is cleaved off is found in line with the Asp(8) Odelta1-C(2) bond in a halide-stabilizing cradle made up of Arg(39), Asn(115), and Phe(175). In both complexes, the Asp(8) Odelta2 carbonyl oxygen atom interacts with Thr(12), Ser(171), and Asn(173), which possibly constitute the oxyanion hole in the hydrolysis of the ester bond. The carboxyl moiety of the substrate is held in position by interactions with Ser(114), Lys(147), and main chain NH groups. The L-2-monochloropropionate CH(3) group is located in a small pocket formed by side chain atoms of Lys(147), Asn(173), Phe(175), and Asp(176). The size and position of the pocket explain the stereospecificity and the limited substrate specificity of the enzyme. These crystallographic results demonstrate that the reaction of the enzyme proceeds via the formation of a covalent enzyme-ester intermediate at the nucleophile Asp(8).

Amino Acid Sequence↗

PubMed1999

Crystal structure of Escherichia coli lytic transglycosylase Slt35 reveals a lysozyme-like catalytic domain with an EF-hand.

BACKGROUND: Lytic transglycosylases are bacterial muramidases that catalyse the cleavage of the beta- 1,4-glycosidic bond between N-acetylmuramic acid (MurNAc) and N-acetylglucosamine (GlcNAc) in peptidoglycan with concomitant formation of a 1,6-anhydrobond in the MurNAc residue. These muramidases play an important role in the metabolism of the bacterial cell wall and might therefore be potential targets for the rational design of antibacterial drugs. One of the lytic transglycosylases is Slt35, a naturally occurring soluble fragment of the outer membrane bound lytic transglycosylase B (MltB) from Escherichia coli. RESULTS: The crystal structure of Slt35 has been determined at 1.7 A resolution. The structure reveals an ellipsoid molecule with three domains called the alpha, beta and core domains. The core domain is sandwiched between the alpha and beta domains. Its fold resembles that of lysozyme, but it contains a single metal ion binding site in a helix-loop-helix module that is surprisingly similar to the eukaryotic EF-hand calcium-binding fold. Interestingly, the Slt35 EF-hand loop consists of 15 residues instead of the usual 12 residues. The only other prokaryotic proteins with an EF-hand motif identified so far are the D-galactose-binding proteins. Residues from the alpha and core domains form a deep groove where the substrate fragment GlcNAc can be bound. CONCLUSIONS: The three-domain structure of Slt35 is completely different from the Slt70 structure, the only other lytic transglycosylase of known structure. Nevertheless, the core domain of Slt35 closely resembles the fold of the catalytic domain of Slt70, despite the absence of any obvious sequence similarity. Residue Glu162 of Slt35 is in an equivalent position to Glu478, the catalytic acid/base of Slt70. GlcNAc binds close to Glu162 in the deep groove. Moreover, mutation of Glu162 into a glutamine residue yielded a completely inactive enzyme. These observations indicate the location of the active site and strongly support a catalytic role for Glu162.

Amino Acid Motifs↗

PubMed1999

Structural evidence for dimerization-regulated activation of an integral membrane phospholipase.

Dimerization is a biological regulatory mechanism employed by both soluble and membrane proteins. However, there are few structural data on the factors that govern dimerization of membrane proteins. Outer membrane phospholipase A (OMPLA) is an integral membrane enzyme which participates in secretion of colicins in Escherichia coli. In Campilobacter and Helicobacter pylori strains, OMPLA is implied in virulence. Its activity is regulated by reversible dimerization. Here we report X-ray structures of monomeric and dimeric OMPLA from E. coli. Dimer interactions occur almost exclusively in the apolar membrane-embedded parts, with two hydrogen bonds within the hydrophobic membrane area being key interactions. Dimerization results in functional oxyanion holes and substrate-binding pockets, which are absent in monomeric OMPLA. These results provide a detailed view of activation by dimerization of a membrane protein.

Bacterial Outer Membrane Proteins↗

PubMed1999

Structure and mechanism of soluble quinoprotein glucose dehydrogenase.

Soluble glucose dehydrogenase (s-GDH; EC 1.1.99.17) is a classical quinoprotein which requires the cofactor pyrroloquinoline quinone (PQQ) to oxidize glucose to gluconolactone. The reaction mechanism of PQQ-dependent enzymes has remained controversial due to the absence of comprehensive structural data. We have determined the X-ray structure of s-GDH with the cofactor at 2.2 A resolution, and of a complex with reduced PQQ and glucose at 1.9 A resolution. These structures reveal the active site of s-GDH, and show for the first time how a functionally bound substrate interacts with the cofactor in a PQQ-dependent enzyme. Twenty years after the discovery of PQQ, our results finally provide conclusive evidence for a reaction mechanism comprising general base-catalyzed hydride transfer, rather than the generally accepted covalent addition-elimination mechanism. Thus, PQQ-dependent enzymes use a mechanism similar to that of nicotinamide- and flavin-dependent oxidoreductases.

Binding Sites↗

PubMed1999

Crystallographic and kinetic evidence of a collision complex formed during halide import in haloalkane dehalogenase.

Haloalkane dehalogenase (DhlA) converts haloalkanes to their corresponding alcohols and halide ions. The rate-limiting step in the reaction of DhlA is the release of the halide ion. The kinetics of halide release have been analyzed by measuring halide binding with stopped-flow fluorescence experiments. At high halide concentrations, halide import occurs predominantly via the rapid formation of a weak initial collision complex, followed by transport of the ion to the active site. To obtain more insight in this collision complex, we determined the X-ray structure of DhlA in the presence of bromide and investigated the kinetics of mutants that were constructed on the basis of this structure. The X-ray structure revealed one bromide ion firmly bound in the active site and two bromide ions weakly bound on the surface of the enzyme. One of the weakly bound ions is close to Thr197 and Phe294, near the entrance of the earlier proposed tunnel for substrate import. Kinetic analysis of bromide import by the Thr197Ala and Phe294Ala mutants of DhlA at high halide concentration showed that the rate constants for halide binding no longer displayed a wild-type-like parabolic increase with increasing bromide concentrations. This is in agreement with an elimination or a decrease in affinity of the surface-located halide-binding site. Likewise, chloride binding kinetics of the mutants indicated significant differences with wild-type enzyme. The results indicate that Thr197 and Phe294 are involved in the formation of an initial collision complex for halide import in DhlA and provide experimental evidence for the role of the tunnel in substrate and product transport.

Binding Sites↗

PubMed1999

The 1.7 A crystal structure of the apo form of the soluble quinoprotein glucose dehydrogenase from Acinetobacter calcoaceticus reveals a novel internal conserved sequence repeat.

The crystal structure of a dimeric apo form of the soluble quinoprotein glucose dehydrogenase (s-GDH) from Acinetobacter calcoaceticus has been solved by multiple isomorphous replacement followed by density modification, and was subsequently refined at 1. 72 A resolution to a final crystallographic R-factor of 16.5% and free R-factor of 20.8% [corrected]. The s-GDH monomer has a beta-propeller fold consisting of six four-stranded anti-parallel beta-sheets aligned around a pseudo 6-fold symmetry axis. The enzyme binds three calcium ions per monomer, two of which are located in the dimer interface. The third is bound in the putative active site, where it may bind and functionalize the pyrroloquinoline quinone (PQQ) cofactor. A data base search unexpectedly showed that four uncharacterized protein sequences are homologous to s-GDH with many residues in the putative active site absolutely conserved. This indicates that these homologs may have a similar structure and that they may catalyze similar PQQ-dependent reactions.A structure-based sequence alignment of the six four-stranded beta-sheets in s-GDH's beta-propeller fold shows an internally conserved sequence repeat that gives rise to two distinct conserved structural motifs. The first structural motif is found at the corner of the short beta-turn between the inner two beta-strands of the beta-sheets, where an Asp side-chain points back into the beta-sheet to form a hydrogen-bond with the OH/NH of a Tyr/Trp side-chain in the same beta-sheet. The second motif involves an Arg/Lys side-chain in the C beta-strand of one beta-sheet, which forms a bidentate salt-bridge with an Asp/Glu in the CD loop of the next beta-sheet. These intra and inter-beta-sheet hydrogen-bonds are likely to contribute to the stability of the s-GDH beta-propeller fold.

Acinetobacter calcoaceticus↗

PubMed1999

The x-ray structure of epoxide hydrolase from Agrobacterium radiobacter AD1. An enzyme to detoxify harmful epoxides.

Epoxide hydrolases catalyze the cofactor-independent hydrolysis of reactive and toxic epoxides. They play an essential role in the detoxification of various xenobiotics in higher organisms and in the bacterial degradation of several environmental pollutants. The first x-ray structure of one of these, from Agrobacterium radiobacter AD1, has been determined by isomorphous replacement at 2.1-A resolution. The enzyme shows a two-domain structure with the core having the alpha/beta hydrolase-fold topology. The catalytic residues, Asp107 and His275, are located in a predominantly hydrophobic environment between the two domains. A tunnel connects the back of the active-site cavity with the surface of the enzyme and provides access to the active site for the catalytic water molecule, which in the crystal structure, has been found at hydrogen bond distance to His275. Because of a crystallographic contact, the active site has become accessible for the Gln134 side chain, which occupies a position mimicking a bound substrate. The structure suggests Tyr152/Tyr215 as the residues involved in substrate binding, stabilization of the transition state, and possibly protonation of the epoxide oxygen.

Amino Acid Sequence↗

PubMed1999

X-ray structures along the reaction pathway of cyclodextrin glycosyltransferase elucidate catalysis in the alpha-amylase family.

Cyclodextrin glycosyltransferase (CGTase) is an enzyme of the alpha-amylase family, which uses a double displacement mechanism to process alpha-linked glucose polymers. We have determined two X-ray structures of CGTase complexes, one with an intact substrate at 2.1 A resolution, and the other with a covalently bound reaction intermediate at 1.8 A resolution. These structures give evidence for substrate distortion and the covalent character of the intermediate and for the first time show, in atomic detail, how catalysis in the alpha-amylase family proceeds by the concerted action of all active site residues.

Bacillus↗

PubMed1998

Kinetic analysis and X-ray structure of haloalkane dehalogenase with a modified halide-binding site.

Haloalkane dehalogenase (DhlA) catalyzes the hydrolysis of haloalkanes via an alkyl-enzyme intermediate. Trp175 forms a halogen/halide-binding site in the active-site cavity together with Trp125. To get more insight in the role of Trp175 in DhlA, we mutated residue 175 and explored the kinetics and X-ray structure of the Trp175Tyr enzyme. The mutagenesis study indicated that an aromatic residue at position 175 is important for the catalytic performance of DhlA. Pre-steady-state kinetic analysis of Trp175Tyr-DhlA showed that the observed 6-fold increase of the Km for 1,2-dibromoethane (DBE) results from reduced rates of both DBE binding and cleavage of the carbon-bromine bond. Furthermore, the enzyme isomerization preceding bromide release became 4-fold faster in the mutant enzyme. As a result, the rate of hydrolysis of the alkyl-enzyme intermediate became the main determinant of the kcat for DBE, which was 2-fold higher than the wild-type kcat. The X-ray structure of the mutant enzyme at pH 6 showed that the backbone structure of the enzyme remains intact and that the tyrosine side chain lies in the same plane as Trp175 in the wild-type enzyme. The Clalpha-stabilizing aromatic rings of Tyr175 and Trp125 are 0.7 A further apart and due to the smaller size of the mutated residue, the volume of the cavity has increased by one-fifth. X-ray structures of mutant and wild-type enzyme at pH 5 demonstrated that the Tyr175 side chain rotated away upon binding of an acetic acid molecule, leaving one of its oxygen atoms hydrogen bonded to the indole nitrogen of Trp125 only. These structural changes indicate a weakened interaction between residue 175 and the halogen atom or halide ion in the active site and help to explain the kinetic changes induced by the Trp175Tyr mutation.

Acetic Acid↗