Biomedical subjects
Publications and source records attributed to K J Edwards.
A biprobe assay utilizing LightCycler technology was developed to detect rifampin resistance-associated gene mutations in the Mycobacterium tuberculosis rpoB gene. Three biprobes detected all mutations present in the 46 rifampin-resistant isolates. Wild-type sequences were correctly identified in each case. The method was reproducible, accurate, and easy to use.
A new species of Archaea grows at pH approximately 0.5 and approximately 40 degrees C in slime streamers and attached to pyrite surfaces at a sulfide ore body, Iron Mountain, California. This iron-oxidizing Archaeon is capable of growth at pH 0. This species represents a dominant prokaryote in the environment studied (slimes and sediments) and constituted up to 85% of the microbial community when solution concentrations were high (conductivity of 100 to 160 millisiemens per centimeter). The presence of this and other closely related Thermoplasmales suggests that these acidophiles are important contributors to acid mine drainage and may substantially impact iron and sulfur cycles.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
We have used a universal adaptor amplification procedure to isolate random Mutator-tagged fragments from Mutator-active maize plants. Direct sequence characterization of 761 Mutator-tagged fragments indicated that a significant number were homologous to sequences within the public databases. The ability of Mutator-tagged fragments to detect homology was not related to the length of the sequence within the range 100-400 bp. However, fragments above this size did show an increased chance of detecting homology to either expressed sequence tags or genes. Characterization of the insertion sites of the Mutator elements suggested that while it does target transcribed regions, Mutator does not appear to have any site preference within the transcription unit. Hybridization of previously unidentified Mutator-tagged fragments to arrayed cDNA libraries confirmed that many of these also showed homology to transcribed regions of the genome. Examination of back-crossed progeny confirmed that all the insertions examined were germinal; however, in all but one case, selfing five individual Mutator-tagged lines failed to reveal an obvious phenotype. This study suggests that the random sequencing of Mutator-tagged fragments is capable of producing both a significant number of interesting transposon tagged genes and mutant plant lines, all of which could be extremely valuable in future gene discovery and functional genomics programmes.
To further our understanding of the ecological role of sulphur-oxidizing microorganisms in the generation of acid mine drainage (AMD), growth and attachment of the chemoautotrophic sulphur-oxidizing bacterium, Thiobacillus caldus, on the sulphide minerals pyrite, marcasite and arsenopyrite was studied. Growth curves were estimated based on total cells detected in the system (in suspension and attached to mineral surfaces). In general, higher cell numbers were detected on surfaces than in suspension. Fluorescent in situ hybridizations to cells on surfaces at mid-log growth confirmed that cells on surfaces were metabolically active. Total cell (both surface and solution phase) generation times on pyrite and marcasite (both FeS2) were calculated to be approximately equals 7 and 6 h respectively. When grown on pyrite (not marcasite), the number of T. caldus cells in the solution phase decreased, while the total number of cells (both surface and solution) increased. Additionally, marcasite supported about three times more total cells (approximately equals 3 x 10(9)) than pyrite (approximately equals 8 x 10(8)). This may be attributed to the dissolution rate of marcasite, which is twice that of pyrite. Epifluorescent and scanning electron microscopy (SEM) were used to analyse the cell orientation on surfaces. Results of Fourier transform analysis of fluorescent images confirmed that attachment to all three sulphides occurred in an oriented manner. Results from high-resolution SEM imaging showed that cell orientation coincides with dissolution pit edges and secondary sulphur minerals that develop during dissolution. Preferential colonization of surfaces relative to solution and oriented cell attachment on these sulphide surfaces suggest that T. caldus may chemotactically select the optimal site for chemoautotrophic growth on sulphur (i.e. the mineral surface).
A total of 568 new simple sequence repeat (SSR)-based markers for barley have been developed from a combination of database sequences and small insert genomic libraries enriched for a range of short simple sequence repeats. Analysis of the SSRs on 16 barley cultivars revealed variable levels of informativeness but no obvious correlation was found with SSR repeat length, motif type, or map position. Of the 568 SSRs developed, 242 were genetically mapped, 216 with 37 previously published SSRs in a single doubled-haploid population derived from the F(1) of an interspecific cross between the cultivar Lina and Hordeum spontaneum Canada Park and 26 SSRs in two other mapping populations. A total of 27 SSRs amplified multiple loci. Centromeric clustering of markers was observed in the main mapping population; however, the clustering severity was reduced in intraspecific crosses, supporting the notion that the observed marker distribution was largely a genetical effect. The mapped SSRs provide a framework for rapidly assigning chromosomal designations and polarity in future mapping programs in barley and a convenient alternative to RFLP for aligning information derived from different populations. A list of the 242 primer pairs that amplify mapped SSRs from total barley genomic DNA is presented.
The structure of DLH (C123S) with PMS bound was solved to 2.5 A resolution (R factor = 15.1%). PMSF in 2-propanol was delivered directly to crystals in drops and unexpectedly caused the crystals to dissolve. New crystals displaying a different morphology emerged within 2 h in situ, a phenomenon that appears to be described for the first time. The changed crystal form reflected altered crystal-packing arrangements elicited by structural changes to the DLH (C123S) molecule on binding inhibitor. The new unit cell remained in the P2(1)2(1)2(1) space group but possessed different dimensions. The structure showed that PMS binding in DLH (C123S) caused conformational changes in the active site and in four regions of the polypeptide chain that contain reverse turns. In the active site, residues with aromatic side chains were repositioned in an edge-to-face cluster around the PMS phenyl ring. Their redistribution prevented restabilization of the triad His202 side chain, which was disordered in electron-density maps. Movements of other residues in the active site were shown to be related to the four displaced regions of the polypeptide chain. Their implied synergy suggests that DLH may be able to accommodate and catalyse a range of compounds unrelated to the natural substrate owing to an inherent coordinated flexibility in its overall structure. Implications for mechanism and further engineering studies are discussed.
Bacterial artificial chromosome (BAC) libraries are an important tool for positional cloning, gene analysis and physical mapping. During studies using BAC clones, it is often necessary to organize them into contiguous sequences (contigs). To finalize, join and extend the contigs, both cloning and sequencing of the ends of the inserts are required. Here, we describe a low-cost, accessible, fast and powerful method for the routine isolation of BAC ends. This method allows the isolation of 20 BAC clone ends in one day. The analysis of the ends reveals fragment sizes compatible with sequencing, and the structure of these clones allows the sequencing of both ends using the same plasmid. Moreover, long end fragments can be sequenced in both directions.
Explore the source record for details and available documents.
The acetan biosynthetic pathway in Acetobacter xylinum is an ideal model system for engineering novel bacterial polysaccharides. To genetically manipulate this pathway, an Acetobacter strain (CKE5), more susceptible to gene-transfer methodologies, was developed. A new gene, aceP, involved in acetan biosynthesis was identified, sequenced and shown to have homology at the amino acid level with beta-D-glucosyl transferases from a number of different organisms. Disruption of aceP in strain CKE5 confirmed the function assigned above and was used to engineer a novel polysaccharide with a pentasaccharide repeat unit.
Microbial populations, their distributions, and their aquatic environments were studied over a year (1997) at an acid mine drainage (AMD) site at Iron Mountain, Calif. Populations were quantified by fluorescence in situ hybridizations with group-specific probes. Probes were used for the domains Eucarya, Bacteria, and Archaea and the two species most widely studied and implicated for their role in AMD production, Thiobacillus ferrooxidans and Leptospirillum ferrooxidans. Results show that microbial populations, in relative proportions and absolute numbers, vary spatially and seasonally and correlate with geochemical and physical conditions (pH, temperature, conductivity, and rainfall). Bacterial populations were in the highest proportion (>95%) in January. Conversely, archaeal populations were in the highest proportion in July and September ( approximately 50%) and were virtually absent in the winter. Bacterial and archaeal populations correlated with conductivity and rainfall. High concentrations of dissolved solids, as reflected by high conductivity values (up to 125 mS/cm), occurred in the summer and correlated with high archaeal populations and proportionally lower bacterial populations. Eukaryotes were not detected in January, when total microbial cell numbers were lowest (<10(5) cells/ml), but eukaryotes increased at low-pH sites ( approximately 0.5) during the remainder of the year. This correlated with decreasing water temperatures (50 to 30 degrees C; January to November) and increasing numbers of prokaryotes (10(8) to 10(9) cells/ml). T. ferrooxidans was in highest abundance (>30%) at moderate pHs and temperatures ( approximately 2.5 and 20 degrees C) in sites that were peripheral to primary acid-generating sites and lowest (0 to 5%) at low-pH sites (pH approximately 0.5) that were in contact with the ore body. L. ferrooxidans was more widely distributed with respect to geochemical conditions (pH = 0 to 3; 20 to 50 degrees C) but was more abundant at higher temperatures and lower pHs ( approximately 40 degrees C; pH approximately 0.5) than T. ferrooxidans.
Microsatellites or simple sequence repeats (SSRs) were isolated from coconut (Cocos nucifera) and tested for polymorphism on restricted germplasm. Sequencing of 197 clones from a cv. Tagnanan Tall-enriched genomic library showed that 75% contained a microsatellite, of which 64% were dinucleotide (GA/CT, CA/GT and GC/CG), 6% were trinucleotide, and 30% were compound repeats. Of 41 primer pairs tested on Tagnanan Tall genomic DNA, 38 gave the expected size product, two amplified two loci, and another gave a multilocus pattern. On 20 coconut samples, the 38 SSRs detected 198 alleles (average: 5.2 alleles per microsatellite). Genetic diversity (D = 1 - sigma pi2) values ranged from 0.141 to 0.809. Heterozygotes were present at high frequencies among some dwarf samples. Analysis of similarity matrices based either on shared alleles at each locus (simple matching coefficient) or on allele bands across all loci (Jaccard coefficient) showed similar results. Dwarfs grouped separately from talls and showed less genetic diversity. In a wider test on 40 samples, 8 SSRs detected 64 alleles (average: eight alleles per microsatellite). These results indicate the high potential of microsatellites to detect genetic diversity in coconut germplasm.
The genus Salix (willow) contains a number of species which have great potential value as biomass crops in short rotation coppice (SRC). Efforts to improve biomass willows by breeding are currently hampered by the limited information available on genetic diversity and on genetic relationships within and among species, clones, and hybrids in the gene pool. Hybridisation occurs commonly in nature and the relatedness of many clones is unclear. Molecular markers were used to assess genetic diversity in a reference set of willows maintained within the U.K. National Collection and 16 elite clones currently being evaluated in field trials at several European sites. The two marker systems tested, RAPDs and AFLPs, were equally informative for revealing relationships within the reference set of clones. No differences were observed when alternative similarity coefficients were compared or when analysis was restricted to the use of polymorphic bands only. Good agreement with available knowledge of the clonal origins was obtained and one instance of duplicate clones was identified. AFLPs revealed more genetic diversity and discriminated between closely related clones. A difference in the relationships revealed was observed with one AFLP primer combination. RAPDs were more problematic, both in terms of reproducibility and scorability.
Explore the source record for details and available documents.
The structure of the unliganded form of the Escherichia coli cytoplasmic peptidyl-prolyl isomerase (ppiB gene product) in a new crystal form was determined by the molecular replacement method and refined to an R-factor of 16.1% at 2.1 A resolution. The enzyme crystallized in the orthorhombic C2221 space group with unit cell dimensions of a=44.7 A, b=68.2 A and c=102.0 A. Comparison with the reported structure of the enzyme complexed with the tripeptide substrate succinyl-Ala-Pro-Ala-p-nitroanilide revealed subtle changes that occur upon complex formation. There is evidence to suggest that two surface loops have significantly reduced mobility in the complexed structure.
Explore the source record for details and available documents.
The relative organization of genes and repetitive DNAs in complex eukaryotic genomes is not well understood. Diagnostic sequencing indicated that a 280-kilobase region containing the maize Adh1-F and u22 genes is composed primarily of retrotransposons inserted within each other. Ten retroelement families were discovered, with reiteration frequencies ranging from 10 to 30,000 copies per haploid genome. These retrotransposons accounted for more than 60 percent of the Adh1-F region and at least 50 percent of the nuclear DNA of maize. These elements were largely intact and are dispersed throughout the gene-containing regions of the maize genome.