Biomedical subjects

K J Lilley

Publications and source records attributed to K J Lilley.

4 recordsLinked to original sources

PubMed2005

Cement from nanocrystalline hydroxyapatite: effect of calcium phosphate ratio.

Nanocrystalline hydroxyapatite (nHA) can be mixed with phosphoric acid to form a brushite cement; a degradable inorganic bone filling material. nHA was precipitated from reactants of calcium to phosphate (Ca/P) ratio 0.8 to 2.0 and mixed with phosphoric acid, which resulted in the formation of a brushite cement. Cement was also formed by mixing microcrystalline calcium phosphates, beta-tricalcium phosphate, hydroxyapatite and tetracalcium phosphate with phosphoric acid solution. Cement produced with nHA was stronger in compression than that formed with crystalline calcium phosphate phases. Setting time, strength and composition of cement produced with nHA was dependant on both the Ca/P ratio of nHA and the concentration of phosphoric acid in cement slurry. Increasing phosphoric acid concentration increased compressive strength whilst reducing the initial setting time of cement. Reducing the Ca/P ratio of nHA precipitation reactants retarded the setting and increased the extent of reaction of cements. This finding was unexpected and suggests that Ca/P ratio may strongly affect dissolution behaviour and this parameter is more important than stoichiometry in determining extent of reaction in this system. This study demonstrated that the wide variation in stoichiometry that may be attained in nanocrystalline apatite may be utilised to change cement performance and setting behaviour.

Bone Cements↗

PubMed2005

Cement from magnesium substituted hydroxyapatite.

Brushite cement may be used as a bone graft material and is more soluble than apatite in physiological conditions. Consequently it is considerably more resorbable in vivo than apatite forming cements. Brushite cement formation has previously been reported by our group following the mixture of nanocrystalline hydroxyapatite and phosphoric acid. In this study, brushite cement was formed from the reaction of nanocrystalline magnesium-substituted hydroxyapatite with phosphoric acid in an attempt to produce a magnesium substituted brushite cement. The presence of magnesium was shown to have a strong effect on cement composition and strength. Additionally the presence of magnesium in brushite cement was found to reduce the extent of brushite hydrolysis resulting in the formation of HA. By incorporating magnesium ions in the apatite reactant structure the concentration of magnesium ions in the liquid phase of the cement was controlled by the dissolution rate of the apatite. This approach may be used to supply other ions to cement systems during setting as a means to manipulate the clinical performance and characteristics of brushite cements.

Bone Cements↗

PubMed2004

Cements from nanocrystalline hydroxyapatite.

Calcium phosphate cements are used as bone substitute materials because they may be moulded to fill a void or defect in bone and are osteoconductive. Although apatite cements are stronger than brushite cements, they are potentially less resorbable in vivo. Brushite cements are three-component systems whereby phosphate ions and water react with a soluble calcium phosphate to form brushite (CaHPO4 x 2H2O). Previously reported brushite cement formulations set following the mixture of a calcium phosphate, such as beta-tricalcium phosphate (beta-TCP), with an acidic component such as H3PO4 or monocalcium phosphate monohydrate (MCPM). Due to its low solubility, hydroxyapatite (HA) is yet to be reported as a reactive component in calcium phosphate cement systems. Here we report a new cement system setting to form a matrix consisting predominantly of brushite following the mixture of phosphoric acid with nanocrystalline HA. As a result of the relative ease with which ionic substitutions may be made in apatite this route may offer a novel way to control cement composition or setting characteristics. Since kinetic solubility is dependent on particle size and precipitation temperature is known to affect precipitated HA crystal size, the phase composition and mechanical properties of cements made from HA precipitated at temperatures between 4 and 60 degrees C were investigated.

Bone Cements↗

PubMed1992

In vivo conversion of [3H]myoinositol to [3H]chiroinositol in rat tissues.

We report here the in vivo conversion of [3H]myoinositol to [3H]chiroinositol. After labeling intraperitoneally with [3H]myoinositol for 3 days to reach radioisotope equilibrium in urine, [3H]chiroinositol was isolated from tissues and purified after 6 N HCl hydrolysis by two sequential paper chromatographies and high performance liquid chromatography (HPLC). Percent conversion of [3H]myoinositol to [3H]chiroinositol was highest in urine (36%), liver (8.8%), muscle (8.8%), and blood (7.6%) with intestine, brain, kidney, spleen, and heart decreasing in percentage from 2.8 to 0.7%. Labeling of other inositol isomers including scyllo-, neo-, and epi-, and mucoinositol was minimal, approximately 0.06% of [3H]myoinositol. Glucose was unlabeled, but glucuronate, the product of myoinositol oxidation, was labeled up to 1.5% of the [3H] myoinositol. Acid hydrolysates of combined inositol-containing phospholipids contain significant labeled chiroinositol. [3H]Phosphatidylinositols and [3H]glycosylphosphatidylinositols were extracted from liver, muscle, and blood, isolated by thin layer chromatography, and inositols purified by HPLC after acid hydrolysis. Percent conversion of [3H]myoinositol to [3H] chiroinositol was highest in blood (60.4%) followed by muscle (7.7%) and liver (2.2%).

Animals↗