PubMed Health⌕ Search

Biomedical subjects

K M Stephens

Publications and source records attributed to K M Stephens.

11 recordsLinked to original sources

I-PpoI and I-CreI homing site sequence degeneracy determined by random mutagenesis and sequential in vitro enrichment.

Plasmid libraries containing partially randomized cleavage sites for the eukaryotic homing endonucleases I-PpoI and I-CreI were constructed, and sites that could be cleaved by I-PpoI or I-CreI were selectively recovered by successive cycles of cleavage and gel separation followed by religation and growth in Escherichia coli. Twenty-one different I-PpoI-sensitive homing sites, including the native homing site, were isolated. These sites were identical at four nucleotide positions within the 15 bp homing site, had a restricted pattern of base substitutions at the remaining 11 positions and displayed a preference for purines flanking the top strand of the homing site sequence. Twenty-one different I-CreI-sensitive homing sites, including the native site, were isolated. Ten nucleotide positions were identical in homing site variants that were I-CreI-sensitive and required the addition of SDS for efficient cleavage product release. Four of these ten positions were identical in homing sites that did not require SDS for product release. There was a preference for pyrimidines flanking the top strand of the homing site sequence. Three of the 24 I-CreI homing site nucleotide positions apparently lacked informational content, i. e. were permissive of cleavage when occupied by any nucleotide. These results suggest that I-PpoI and I-CreI make a large number of DNA-protein contacts across their homing site sequences, and that different subsets of these contacts may be sufficient to maintain a high degree of sequence-specific homing site recognition and cleavage. The sequential enrichment protocol we used should be useful for defining the sequence degeneracy and informational content of other homing endonuclease target sites.

Base Sequence↗

Functional properties of replication fork assemblies established by the bacteriophage lambda O and P replication proteins.

We have used a set of bacteriophage lambda and Escherichia coli replication proteins to establish rolling circle DNA replication in vitro to permit characterization of the functional properties of lambda replication forks. We demonstrate that the lambda replication fork assembly synthesizes leading strand DNA chains at a physiological rate of 650-750 nucleotides/s at 30 degrees C. This rate is identical to the fork movement rate we obtained using a minimal protein system, composed solely of E. coli DnaB helicase and DNA polymerase III holoenzyme. Our data are consistent with the conclusion that these two key bacterial replication proteins constitute the basic functional unit of a lambda replication fork. A comparison of rolling circle DNA replication in the minimal and lambda replication systems indicated that DNA synthesis proceeded for more extensive periods in the lambda system and produced longer DNA chains, which averaged nearly 200 kilobases in length. The higher potency of the lambda replication system is believed to result from its capacity to mediate efficient reloading of DnaB helicase onto rolling circle replication products, thereby permitting reinitiation of DNA chain elongation following spontaneous termination events. E. coli single-stranded DNA-binding protein and primase individually stimulated rolling circle DNA replication, but they apparently act indirectly by blocking accumulation of inhibitory free single-stranded DNA product. Finally, in the course of this work, we discovered that E. coli DNA polymerase III holoenzyme is itself capable of carrying out significant strand displacement DNA synthesis at about 50 nucleotides/s when it is supplemented with E. coli single-stranded DNA-binding protein.

Bacterial Proteins↗

Crystallization and preliminary X-ray studies of I-CreI: a group I intron-encoded endonuclease from C. reinhardtii.

Group I intron endonuclease I-CreI is encoded by an open reading frame contained within a self-splicing intron in the Chlamydomonas reinhardtii chloroplast 23S rRNA gene. I-CreI initiates the lateral transfer or homing of this intron by specifically recognizing and cleaving a pseudopalindromic 19-24 bp homing site in chloroplast 23S rRNA genes that lack the intron. The gene encoding this enzyme has been subcloned, and the protein product has been purified and crystallized. The crystals belong to space group P321, with unit cell dimensions a = b = 78.2 A, c = 67.4 A. The crystal unit cell is consistent with an asymmetric unit consisting of the enzyme monomer. The specific volume of this unit cell is 3.3 A3/Da. The crystals diffract to at least 3.0 A resolution after flash-cooling, when using a rotating anode x-ray source and an RAXIS image plate detector.

Animals↗

Crystallization and preliminary X-ray studies of I-PpoI: a nuclear, intron-encoded homing endonuclease from Physarum polycephalum.

The homing endonuclease I-PpoI is encoded by an optional third intron, Pp LSU 3, found in nuclear, extrachromosomal copies of the Physarum polycephalum 26S rRNA gene. This endonuclease promotes the lateral transfer or "homing" of its encoding intron by recognizing and cleaving a partially symmetric, 15 bp homing site in 26S rDNA alleles that lack the Pp LSU 3 intron. The open reading frame encoding I-PpoI has been subcloned, and the endonuclease has been overproduced in E. coli. Purified recombinant I-PpoI has been co-crystallized with a 21 bp homing site DNA duplex. The crystals belong to space group P3(1)21, with unit cell dimensions a = b = 114 A, c = 89 A. The results of initial X-ray diffraction experiments indicate that the asymmetric unit contains an enzyme homodimer and one duplex DNA molecule, and that the unit cell has a specific volume of 3.4 A3/dalton. These experiments also provide strong evidence that I-PpoI contains several bound zinc ions as part of its structure.

Animals↗

The structure of I-Crel, a group I intron-encoded homing endonuclease.

The structure of I-Crel provides the first view of a protein encoded by a gene within an intron. This endonuclease recognizes a long DNA site approximately 20 base pairs in length and facilitates the lateral transfer of that intron. The protein exhibits a DNA-binding surface consisting of four antiparallel beta-strands that form a 20 A wide groove which is over 70 A long. The architecture of this fold is different from that of the TATA binding protein, TBP, which also contains an antiparallel beta-saddle. The conserved LAGLIDADG motif, which is found in many mobile intron endonucleases, maturases and inteins, forms a novel helical interface and contributes essential residues to the active site.

Amino Acid Sequence↗

Genetic analysis of the Chlamydomonas reinhardtii I-CreI mobile intron homing system in Escherichia coli.

We have developed and used a genetic selection system in Escherichia coli to study functional requirements for homing site recognition and cleavage by a representative eukaryotic mobile intron endonuclease. The homing endonuclease, I-CreI, was originally isolated from the chloroplast of the unicellular green alga Chlamydomonas reinhardtii. I-CreI homing site mutants contained base pair substitutions or single base deletions that altered the rate of homing site cleavage and/or product release. I-CreI endonuclease mutants fell into six phenotypic classes that differed in in vivo activity, toxicity or genetic dominance. Inactivating mutations clustered in the N-terminal 60% of the I-CreI amino acid sequence, and two frameshift mutations were isolated that resulted in premature translation termination though retained partial activity. These mutations indicate that the N-terminal two-thirds of the I-CreI endonuclease is sufficient for homing site recognition and cleavage. Substitution mutations altered in four potential active site residues were examined: D20N, Q47H or R70A substitutions inactivated endonuclease activity, whereas S22A did not. The genetic approach we have taken complements phylogenetic and structural studies of mobile intron endonucleases and has provided new information on the mechanistic basis of I-CreI homing site recognition and cleavage.

Animals↗

Agrobacterium tumefaciens-mediated transformation of yeast.

Agrobacterium tumefaciens transfers a piece of its Ti plasmid DNA (transferred DNA or T-DNA) into plant cells during crown gall tumorigenesis. A. tumefaciens can transfer its T-DNA to a wide variety of hosts, including both dicotyledonous and monocotyledonous plants. We show that the host range of A. tumefaciens can be extended to include Saccharomyces cerevisiae. Additionally, we demonstrate that while T-DNA transfer into S. cerevisiae is very similar to T-DNA transfer into plants, the requirements are not entirely conserved. The Ti plasmid-encoded vir genes of A. tumefaciens that are required for T-DNA transfer into plants are also required for T-DNA transfer into S. cerevisiae, as is vir gene induction. However, mutations in the chromosomal virulence genes of A. tumefaciens involved in attachment to plant cells have no effect on the efficiency of T-DNA transfer into S. cerevisiae. We also demonstrate that transformation efficiency is improved 500-fold by the addition of yeast telomeric sequences within the T-DNA sequence.

Agrobacterium tumefaciens↗

Agrobacterium tumefaciens VirB11 protein requires a consensus nucleotide-binding site for function in virulence.

virB11, one of the 11 genes of the virB operon, is absolutely required for transport of T-DNA from Agrobacterium tumefaciens into plant cells. Previous studies reported that VirB11 is an ATPase with autophosphorylation activity and localizes to the inner membrane even though the protein does not contain the consensus N-terminal export sequence. In this report, we show that VirB11 localizes to the inner membrane even in the absence of other tumor-inducing (Ti) plasmid-encoded proteins. To facilitate the further characterization of VirB11, we purified this protein from the soluble fraction of an Escherichia coli extract by fusing VirB11 to the maltose-binding protein. The maltose-binding protein-VirB11 fusion was able to complement a virB11 deletion mutant of A. tumefaciens for tumor formation and also localized properly to the inner membrane of A. tumefaciens. The 72-kDa protein, purified from E. coli, exhibited no autophosphorylation, ATPase activity, or ATP-binding activity. To study the importance of the Walker nucleotide-binding site present in VirB11, mutations were generated to replace the conserved lysine residue with either alanine or arginine. Expression of the virB11K175A mutant gene resulted in an avirulent phenotype, and expression of the virB11K175R mutant gene gave rise to an attenuated virulence phenotype. Both mutant proteins were present at levels three to four times higher than that of VirB11 in the wild-type strain. The mutant genes did not exhibit a transdominant phenotype on tumor formation in bacteria that were expressing wild-type virB11. The mutant proteins also localized properly to the inner membrane of A. tumefaciens, but the VirB11K175R protein appeared to be unstable after lysis of the cells.

ATP-Binding Cassette Transporters↗

An essential virulence protein of Agrobacterium tumefaciens, VirB4, requires an intact mononucleotide binding domain to function in transfer of T-DNA.

The 11 gene products of the Agrobacterium tumefaciens virB operon, together with the VirD4 protein, are proposed to form a membrane complex which mediates the transfer of T-DNA to plant cells. This study examined one putative component of that complex, VirB4. A deletion of the virB4 gene on the Ti plasmid pTiA6NC was constructed by replacing the virB4 gene with the kanamycin resistance-conferring nptII gene. The virB4 gene was found to be necessary for virulence on plants and for the transfer of IncQ plasmids to recipient cells of A. tumefaciens. Genetic complementation of the deletion strain by the virB4 gene under control of the virB promoter confirmed that the deletion was nonpolar on downstream virB genes. Genetic complementation was also achieved with the virB4 gene placed under control of the lac promoter, even though synthesis of the VirB4 protein from this promoter is far below wild-type levels. Having shown a role for the VirB4 protein in DNA transfer, lysine-439, found within the conserved mononucleotide binding domain of VirB4, was changed to a glutamic acid, methionine, or arginine by oligonucleotide-directed mutagenesis. virB4 genes bearing these mutations were unable to complement the virB4 deletion for either virulence or for IncQ transfer, showing that an intact mononucleotide binding site is necessary for the function of VirB4 in DNA transfer. The necessity of the VirB4 protein with an intact mononucleotide binding site for extracellular complementation of virE2 mutants was also shown. In merodiploid studies, lysine-439 mutations present in trans decreased IncQ plasmid transfer frequencies, suggesting that VirB4 functions within a complex to facilitate DNA transfer.

Agrobacterium tumefaciens↗

Penetrating missile injuries in the Gulf war 1991.

During the recent Gulf war 63 patients with penetrating missile injuries (including 29 Iraqi prisoners of war) underwent operation in a British Army Field Hospital. Their injuries and initial operative management are reported. Fifty-one casualties (81 per cent) suffered an average of nine wounds (range 1-45) due to fragmentation weapons, and 12 casualties sustained bullet wounds. All wounds were explored following the established principles of war surgery. The extremities were involved in 48 patients (76 per cent). Eight compound long bone fractures were managed with external skeletal fixators applied at the time of initial operation. Laparotomy was performed on seven patients, one of whom died. The average duration of operation was 77 min for shrapnel wounds and 85 min for bullet wounds.

Abdominal Injuries↗