PubMed HealthSearch

Biomedical subjects

K Ohki

Publications and source records attributed to K Ohki.

At least 19 recordsLinked to original sources

Effects of poly(L-lysine) on the structural and thermotropic properties of dipalmitoylphosphatidylglycerol bilayers.

The effects of poly(L-lysine) on the structural and thermotropic properties of dipalmitoylphosphatidylglycerol (DPPG) bilayers were studied with differential scanning calorimetry (DSC), X-ray diffraction and freeze-fracture electron microscopy. For thermal behavior, in the DPPG/poly(L-lysine) system the main transition temperature rises to 45.7 degrees C and the pretransition disappears in opposition to pure DPPG vesicles. An additional transition appears approximately at 36 degrees C for the DPPG/poly(L-lysine) system after incubation at 4 degrees C for two months. The incubated sample gives a X-ray diffraction pattern having several additional reflections in the range of 0.2-0.9 nm at 15 degrees C. These results suggest that even in the presence of poly(L-lysine) the DPPG bilayers form the subgel (Lc) phase after the long incubation at a low temperature. The X-ray diffraction measurements indicate that the structure of the Lc phase for DPPG/poly(L-lysine) system is different from that of pure DPPG bilayers. On the other hand, in the gel (L beta') phase, the wide-angle X-ray diffraction pattern suggests that the presence of poly(L-lysine) hardly affects the packing of hydrocarbon chains in the DPPG bilayers. The small-angle X-ray diffraction and freeze-fracture electron microscopy exhibit that the DPPG/poly(L-lysine) system forms a tightly packed multilamellar structure in which the poly(L-lysine) is intercalated between the subsequent DPPG bilayers.

Calorimetry, Differential Scanning

Luminescence quenching by nitroxide spin labels in aqueous solution: studies on the mechanism of quenching.

The mechanism of luminescence quenching by spin labels was investigated in aqueous solution by steady-state and time-resolved luminescence techniques. Water-soluble nitroxide radicals strongly quenched the luminescence emitted by Tb3+ chelates and by fluorescein, either free or conjugated to proteins. The following features of the quenching reaction were established: (I) the rate constant for quenching of triplet-state Tb3+ by nitroxides was about 4 orders of magnitude smaller (ca. 10(5) M-1 s-1) than those of the singlet-state probes; (II) the quenchers reduced the excited-state lifetime of both probes; (III) the rate constants for quenching of both probes were found to be apparently independent of the temperature (between 6 and 42 degrees C) and viscosity (up to 60 mPa.s) of the solutions; (IV) both singlet and triplet quenching rates were sensitive to solvent polarity; (V) there is a small but significant spectral overlap between the absorption band of weekly absorbing nitroxide radicals and the emission spectra of luminophores, the extent of which, however, does not correlate with the extent of quenching; (VI) the quenching rate declines sharply with an increasing luminophore to nitroxide distance. The distance dependence of the quenching rate showed a satisfactory fit to an exponential function. These findings indicate that the quenching reaction is dominated by an electron exchange between the excited singlet- or triplet-state luminophore and the nitroxide radical rather than controlled by diffusional properties of the reactants.(ABSTRACT TRUNCATED AT 250 WORDS)

Cyclic N-Oxides

Monoclonal antibodies to a CD4 peptide derivative which includes the region corresponding to an immunoglobulin CDR3: evidence of the involvement of pre-CDR3-related region in HIV-1 and host cell interaction.

A CD4 peptide of amino acid residues 68-130 [CD4(68-130)], which had the capacities to inhibit HIV-1 replication and HIV-1-induced syncytium formation, was used as an immunogen for the preparation of mAb. The mAbs prepared were classified into at least five types (I-V) in terms of their recognition sites by ELISA using various kinds of smaller CD4 peptides. Among them, the type I mAb no. 35 recognizing amino acid residues 72-84, which lies just before the region corresponding to an immunoglobulin third complementarity-determining region (CDR3), showed the strongest effects in reducing both HIV-1 infection and HIV-1-induced syncytium formation, although a large amount of no. 35 mAb was necessary to reduce such HIV-1 activities compared with those of anti-Leu-3a and OKT4A mAbs which recognize CD4 epitopes near a portion corresponding to an immunoglobulin CDR2. Western blot analysis showed that the reactivities of CD4 molecule in CD4-positive cells or sCD4 molecule with types I-V mAbs were stronger than that with anti-Leu-3a mAb. Flow cytometry showed that no. 35 mAb was faintly reactive with native CD4 molecule on cell surface at the concn showing the inhibitory effects on HIV-1 infection and syncytium formation. In addition, a smaller peptide CD4(66-92), one of the good epitope peptides for no. 35 mAb, also showed strong inhibitory effect on HIV-1 infection as well as a weaker inhibitory effect on syncytium formation. These results suggest that, in addition to the CD4 CDR2-related region, the pre-CDR3-related region is also involved in the early events of the interactions between the host cell and HIV-1.

Amino Acid Sequence

Major core proteins, p24s, of human, simian, and feline immunodeficiency viruses are partly expressed on the surface of the virus-infected cells.

We have previously shown the expression of human immunodeficiency virus type 1 (HIV-1) major gag protein, p24, on the surface of persistently HIV-1-infected cells by using murine monoclonal antibodies (mAb). We now report that the cell surface gag p24 antigen expression is a universal phenomenon among HIV-1, simian immunodeficiency virus (SIV), and feline immunodeficiency virus (FIV). The mAbs prepared by immunization with purified HIV-1 particles were used as antibodies cross-reactive to HIV-1 and SIVagmp24 antigens. The mAbs to FIV p24 were raised against the gag precursor 50 kDa protein of FIV, which was expressed by Baculovirus vector. The p24 antigen expression on the cell surface was detectable in certain combinations of virus-host cell systems in all of these viruses. Since these p24 regions of the animal viruses seem to play as important a role in cell-mediated immunity as that of HIV-1, the p24 applicability as a candidate epitope for vaccine development could be evaluated in those animals.

Animals

Cells surviving infection by human immunodeficiency virus type 1: vif or vpu mutants produce non-infectious or markedly less cytopathic viruses.

Under conditions in which a clonal cell line (M10) isolated from a human T cell lymphotrophic virus type I-transformed MT-4 cell line was completely killed by infection with wild-type human immunodeficiency virus type 1 (HIV-1), equivalent M10 cells survived infection with HIV-1 vif, vpr or vpu mutant virus after transient cytopathic effects. Several cell clones, which were isolated from the proliferating M10 cells after infection with vif and vpu mutant viruses (M10/vif- and M10/vpu-), had heterogeneous HIV-1 phenotypes in terms of HIV-1 antigen expression, their syncytium forming capacity, reverse transcriptase activity and the infectivity of HIV-1 particles produced. When the replication kinetics of the HIV-1 particles produced were assayed in M10 cells, the clones could be classified into three types, i.e. type I producing non-infectious HIV-1, type II producing infectious HIV-1 with low replicative ability and type III producing infectious HIV-1 with a replicative ability similar to that of wild-type HIV-1. HIV-1 major viral cell proteins and virus particle fractions were almost typical in types II and III but not in type I. Electron microscopic examination of particles released by I, II and III clones revealed rare defective, predominantly defective and essentially normal virions, respectively. Northern and Southern blot analyses revealed no apparent deletion in the proviral DNA and mRNA prepared from these clones, except in the case of type I and II clones isolated from M10/vpu- which contained large deletions in the mRNAs for gag and gag-pol proteins. Thus, M10 cells surviving infection with HIV-1 vif or vpu mutants are heterogeneous, persistently expressing HIV-1 antigens and producing non-infectious or less cytopathic virus.

Blotting, Northern

Human immunodeficiency virus type 1 (HIV-1) superinfection of a cell clone converting it from production of defective to infectious HIV-1 is mediated predominantly by CD4 regions other than the major binding site for HIV-1 glycoproteins.

A cell clone, L-2, which produces non-infectious doughnut-shaped human immunodeficiency virus type 1 (HIV-1) particles, was permissive for HIV-1 superinfection, which resulted in the production of infectious particles. The superinfection showed slow kinetics compared with primary HIV-1 infection of M10 cells, the parent of the L-2 cell clone. Inhibition studies on the superinfection of L-2 cells using several CD4-related reagents showed that the CD4 molecule was an essential component of the receptor for superinfection. Strong inhibitory effects were obtained using CD4 peptides such as CD4(68-130), which includes a portion homologous to the immunoglobulin third complementarity-determining region (CDR3), as well as recombinant soluble CD4. In contrast, a CD4(45-60) peptide, which includes most of the CDR2-related region, was not effective, although the Leu-3a monoclonal antibody (MAb), which recognizes a site near the CDR2-related region, did slightly, but significantly, delay the superinfection kinetics. Comparative flow cytometry of L-2 and M10 cells revealed that the cell surface of L-2 cells despite expressing HIV-1 env protein, reacted slightly with OKT4 or anti-CD4(68-130) MAb, but not with Leu-3a or OKT4A MAb. In contrast, no reaction was detected with any of these anti-CD4 MAbs on the surface of another HIV-1 superinfection-resistant cell clone, MOLT-#8IIIB-14, which expresses HIV-1 env proteins but does not produce infectious HIV-1 particles. These results strongly suggest that expression of the CD4 major receptor site for primary HIV-1 infection is preferentially decreased on the surface of L-2 cells, but that the OKT4 epitope and the nearby region corresponding to immunoglobulin CDR3 remain exposed on the cell surface. Consequently, the CD4 CDR3-related region could play a major role as the receptor for the superinfection reported here.

Binding Sites

Bactericidal activities of rat defensins and synthetic rabbit defensins on Staphylococci, Klebsiella pneumoniae (Chedid, 277, and 8N3), Pseudomonas aeruginosa (mucoid and nonmucoid strains), Salmonella typhimurium (Ra, Rc, Rd, and Re of LPS mutants) and Escherichia coli.

Rat defensins were purified and tested for in vitro bactericidal assay against gram-positive and gram-negative bacteria. Staphylococcus aureus (209P, Cowan I, Smith diffuse and Smith compact) were resistant to defensins, whereas Staphylococcus epidermidis, Staphylococcus saprophyticus, Micrococcus lysodeikticus and Bacillus subtilis were less sensitive. Gram-negative bacteria, such as Pseudomonas aeruginosa (mucoid and K) and Klebsiella pneumoniae (Chedid, 277, and 8N3 which were heavily capsulated, moderately capsulated and noncapsulated, respectively) were all very sensitive to defensins and killed within 20 min. Escherichia coli was moderately sensitive and the rough mutants of lipopolysaccharide (LPS) of Salmonella typhimurium LT2, such as Ra, Rc, Rd, and Re were equally sensitive to defensins, being killed within 40 min. Lysozyme did not show any bactericidal activity except against M. lysodeikticus and B. subtilis, whereas it enhanced the bactericidal activity of defensins against P. aeruginosa, E. coli, and K. pneumoniae and suppressed the killing activity of defensins against S. typhimurium and S. aureus. With regard to the three synthetic rabbit defensins, NP1, NP4, and NP5, NP1 showed strong bactericidal activity against K. pneumoniae 277, comparable to that of rat defensins. Neither NP4 nor NP5 showed any bactericidal activity, while NP5 rather enhanced the bactericidal activity of NP1 against K. pneumoniae 277.

Animals

Lung traction causes an increase in plasma prostacyclin concentration and decrease in mean arterial blood pressure.

The effects of lung traction on arterial blood pressure and plasma prostacyclin concentrations were studied in five patients undergoing partial pneumonectomy or lobectomy. After manual traction of a lung segment, mean arterial blood pressure decreased from 77 +/- 5 mm Hg (mean +/- SEM, before lung traction) to 59 +/- 5 mm Hg. The concentrations of 6-keto prostaglandin F1 alpha (a stable breakdown product of prostacyclin) increased significantly from 46 +/- 6 pg/mL (mean +/- SEM, before thoracotomy) to 593 +/- 91 pg/mL. Four of five patients showed facial flushing and palmar erythema. Arterial blood pressure returned to pretraction value, and both the facial flushing and palmar erythema disappeared within 30 min after lung traction. These results suggest that traction of the lung stimulates release and/or production of prostacyclin, which results in facial flushing, palmar erythema, and decrease in arterial blood pressure.

Adolescent

Differential effects of bacterial lipopolysaccharide and interferon-gamma on proliferation of two factor-dependent macrophage cell lines.

We examined the responsiveness of two factor-dependent macrophage cell lines, BDM-1 and its subclone, BDM-1W3, to bacterial lipopolysaccharide (LPS), interferon-gamma (IFN-gamma), and tumor necrosis factor-alpha (TNF-alpha) for their growth. LPS inhibited the M-CSF-dependent proliferation of BDM-1 cells but it had no effect on the proliferation of BDM-1W3 cells. LPS promoted DNA synthesis and supported the cell viability in the absence of CSFs in BDM-1 and BDM-1W3 cells, suggesting that the intracellular signals are transduced from the interaction of LPS with LPS-binding sites in BDM-1W3 cells as well as in BDM-1 cells. IFN-gamma inhibited the proliferation of BDM-1 and BDM-1W3 cells. However, BDM-1 cells were more susceptible to the inhibitory effect of IFN-gamma than BDM-1W3 cells. In contrast to LPS and IFN-gamma, TNF-alpha did not inhibit the proliferation of BDM-1 and BDM-1W3 cells. These cell lines should be useful for studying the regulatory mechanisms in CSF-dependent macrophage proliferation.

Animals

Metabolic fate of [14C]triglyceride-entrapped lactosylceramide-bearing liposomes after intravenous injection into mouse.

We investigated the distribution and fate of liposomes after their intravenous injection into a mouse. Liposomes were composed of dimyristoylphosphatidylcholine, cholesterol and dicetylphosphate (7:2:1, molar ratio) with or without lactosylceramide. They were characterized as small unilamellar vesicles, approximately 100 nm in diameter, using gel-exclusion chromatography on a Sephacryl S-1000, freeze-fracture electron microscope and dynamic light scattering method. Liposomes were very stable in serum as seen by the results of leakage of the entrapped marker and electrophoresis experiments. We demonstrated that liposomes were internalized by way of an endocytotic process via coated vesicles detected in the electron microscope. The increase in liver uptake of lactosylceramide-bearing liposomes was mostly accounted for by enhanced uptake in the parenchymal cells, while uptake by non-parenchymal cells was only slightly increased. This observation supported the notion that a galactose-specific receptor was involved in liver uptake of lactosylceramide liposomes. The lactosylceramide-bearing liposomes were preferentially recovered in the liver and were found to first be predominantly localized in the mitochondria-lysosomal fraction. They were then decomposed by lysosomal enzymes, and the hydrolyzed components were reincorporated into membrane phospholipids in the microsomal fraction. At the same time, a rapid and reversible exchange of phosphatidylcholine between microsomes and mitochondria was demonstrated.

Absorption

Wear of denture teeth by use of metal plates. Part 2: Abrasive wear of posterior teeth.

An in vitro study was conducted to evaluate the abrasive wear resistance of high-strength denture teeth (HS teeth). Eight types of specimen were used in the experiments; 3 types of HS teeth, 3 types of conventional plastic denture teeth (PL teeth), porcelain teeth and metal teeth. Sliding-induced wear tests were conducted by sliding the samples on a metal plate. The abrasive wear resistance of the samples was evaluated in terms of wear depth, weight loss and SEM observation. Comparison of wear depth showed that abrasive wear resistance of HS teeth was 4.7 times that of PL teeth, 0.7 times that of porcelain teeth and 8.3 times that of metal teeth. In terms of weight loss, the corresponding values were 3.3-fold, 0.2-fold and 11.4-fold, respectively.

Dental Porcelain

Wear of denture teeth by use of metal plates. Part 3: Abrasive wear of posterior teeth and wear of opposing metal plates.

An in vitro evaluation of abrasive wear resistance of high-strength denture (HS) teeth and wear of metal plates (Pd alloy) on the opposing side was conducted. A total of 8 types of teeth were used in the experiments including 3 types of HS teeth, 3 types of conventional plastic denture (PL) teeth, porcelain teeth and metal teeth (Pd alloy). Sliding-induced wear tests were conducted by sliding these teeth over the metal plates. Abrasive wear resistance of the teeth was evaluated in terms of wear depth and weight loss. A comparison of wear depth showed that the abrasive wear resistance of HS teeth was 4.7 times that of PL teeth, 0.7 times that of porcelain teeth and 8.3 times that of metal teeth. Weight loss showed that the abrasive wear resistance of HS teeth was 3.3 times that of PL teeth, 0.2 times that of porcelain teeth and 11.4 times that of metal teeth. The weight loss of the metal plates was minimal when they slid over HS teeth, but increased in the order PL teeth, porcelain teeth and metal teeth.

Dental Alloys

Effects and distribution of intravitreally or subretinally injected silicone oil identified in rabbit retina using osmium tetroxide method.

Silicone oil was injected into the eyes of 28 rabbits. Utilizing the specific affinity of osmium tetroxide for lipids, the pathological features and histochemical localization of silicone oil within the retina were studied. This osmium tetroxide technique makes it possible to identify the presence of silicone oil particles in the ocular tissues. It was demonstrated that in eyes with silicone oil injected into the vitreous cavity or subretinal space, silicone oil was detected in the inner retinal layer and in phagocytes in the vitreous cavity but not in the outer retinal layer, retinal pigment epithelium and choroid. In addition, prominent subretinal and epiretinal proliferation with abundant phagocytes containing silicone oil particles were noted in the eyes with subretinal injection of silicone oil through an artificial retinal break. This study suggests that when injected subretinally silicone oil induces excessive subretinal and epiretinal proliferation.

Animals

[An experimental study of the surgical trauma on the rabbit's lens suspensory apparatus after cataract surgery].

Extracapsular cataract extraction (ECCE) and posterior chamber intraocular lens (PC-IOL) implantation requires that the posterior capsule and the zonules remain sufficiently intact. To assess the surgical trauma on the lens suspensory apparatus of the enucleated rabbit eye, we developed a new fine pressure gauge that could quantitate its strength. The cornea and the iris of enucleated eyes were removed to allow clear visualization of the anterior surface of the lens to the equator. Afterwards several types of anterior capsulotomy were performed for ECCE and PC-IOL implantation. And then the lens of the pseudophakic eye was vertically pressed with the plastic rod of the fine pressure transducer, and the strength of the lens suspensory apparatus was simultaneously measured. The strength of the lens suspensory apparatus of the pseudophakic eye decreased approximately 35% compared with that of the phakic eye. Moreover the integrity of the lens capsule of animals with circular capsulorhexis with tears or linear capsulotomy decreased approximately 43% compared with that of continuous circular capsulorhexis (CCC) and also zonular rupture and vitreous loss occurred as a result of the expansion of radial tears in the anterior capsule. The present study indicates that the strength of the lens suspensory apparatus decreases with cataract surgery, suggesting that much more attention to cataract surgery is needed if the anterior capsule had radial tears. It is also suggested that CCC is the best type of anterior capsulectomy procedure.

Animals

Electrostatic interaction of poly(L-lysine) with dipalmitoylphosphatidic acid studied by X-ray diffraction.

Structure of dipalmitoylphosphatidic acid (DPPA) bilayers in the presence of poly(L-lysine) is proposed from the results of X-ray diffraction obtained by a storage phosphor detector with a high resolution called an imaging plate. The small-angle X-ray diffraction pattern exhibits that DPPA/poly(L-lysine) complex forms a highly ordered multilamellar structure. The electron density profile of the DPPA/poly(L-lysine) complex draws that only one poly(L-lysine) layer is intercalated between the neighboring DPPA bilayers. The wide-angle X-ray diffraction pattern suggests that the presence of poly(L-lysine) hardly affects the nature of hydrocarbon chain packing in the DPPA bilayers. The X-ray reflection from the DPPA/poly(L-lysine) complex indicates that the poly(L-lysine) molecules adopt a beta-sheet conformation on the surface of the DPPA bilayers. The both surface areas occupied by a headgroup of the DPPA and by a lysine residue in poly(L-lysine) are estimated from the observed spacings. The number ratio of lysine residues to DPPA headgroups per unit area is greater than unity. Therefore, one DPPA headgroup interacts with more than one lysine residue electrostatically, i.e., the electric charge distributions in both the surface of a DPPA bilayer and the poly(L-lysine) beta-sheet are incommensurate.

Electrons

Effect of substitution of hydrogen oxide by deuterium oxide on thermotropic transition between the interdigitated gel phase and the ripple phase of dihexadecylphosphatidylcholine.

Thermotropic transitions of dihexadecylphosphatidylcholine (DHPC) dispersions in hydrogen oxide (1H2O) and deuterium oxide (2H2O) were investigated by differential scanning calorimetry (DSC). In DHPC dispersions, transition temperature between interdigitated gel phase (L beta I) and ripple phase (P beta') is lower in 2H2O than in 1H2O, and transition between the ripple phase (P beta') and fluid phase (L alpha) in 2H2O occurs at a temperature slightly higher than in 1H2O. In dipalmitoylphosphatidylcholine (DPPC) dispersions, on the other hand, transition temperature between lamellar gel phase (L beta') and ripple phase is higher in 2H2O than in 1H2O. These results suggest that the interdigitated gel phase is more stable in 1H2O than in 2H2O. To account for the shift of transition temperature by the water substitution, difference of interfacial energies between these aqueous environments is discussed.

Calorimetry, Differential Scanning

Arrangement of nitrogenase structural genes in an aerobic filamentous nonheterocystous cyanobacterium.

Members of the marine filamentous, nonheterocystous cyanobacterial genus Trichodesmium not only are capable of fixing nitrogen aerobically in the light but when grown under a light-dark cycle will fix nitrogen only during the light phase. In this study, we constructed a restriction map of the structural nitrogen fixation genes (nifHDK) in Trichodesmium sp. strain NIBB 1067. We found that the organization of the nif genes in Trichodesmium sp. strain NIBB 1067 is contiguous, as found in other nonheterocystous cyanobacteria and in heterocysts. Furthermore, the nif gene arrangement was identical when the cultures were grown with combined nitrogen or under nitrogen-fixing conditions. Therefore, no gene rearrangements occur, such as those that occur during the development of heterocysts in heterocystous species.

Blotting, Southern