PubMed Health⌕ Search

Biomedical subjects

K Weston-Hafer

Publications and source records attributed to K Weston-Hafer.

9 recordsLinked to original sources

AmpG, a signal transducer in chromosomal beta-lactamase induction.

The chromosomal ampC beta-lactamase in Citrobacter freundii and Enterobacter cloacae is inducible by beta-lactam antibiotics. When an inducible ampC gene is introduced on a plasmid into Escherichia coli together with its transcriptional regulator ampR, the plasmid-borne beta-lactamase is still inducible. We have isolated mutants, containing alterations in a novel E. coli gene, ampG, in which a cloned C. freundii ampC gene is unable to respond to beta-lactam inducers. The ampG gene was cloned, sequenced and mapped to minute 9.6 on the E. coli chromosome. The deduced amino acid sequence predicted AmpG to be a 53 kDa, transmembrane protein, which we propose acts as a signal transducer or permease in the beta-lactamase induction system. Immediately upstream of ampG there is another 579-base-pair-long open reading frame (ORF) encoding a putative lipoprotein shown to be non-essential for beta-lactamase induction. We have found that ampG and this ORF form an operon, whose promoter is located in front of the ORF. Located closely upstream of the putative promoter is the morphogene bolA, which is transcribed in the opposite orientation. However, using transcription fusions, we have found that the ampG transcription is not regulated by bolA. In addition, we show that transcription is probably not regulated by either the starvation specific sigma factor RpoS, which controls bolA, or by AmpD the negative regulator for ampC transcription.

Amino Acid Sequence↗

Tn5 insertion specificity is not influenced by IS50 end sequences in target DNA.

The bacterial transposon Tn5 inserts into dozens of sites in a gene, some of which are used preferentially (hotspots). Features of certain sites and precedents provided by several other transposons had suggested that sequences in target DNA corresponding to the ends of Tn5 or of its component IS50 elements might facilitate transposition to these sites. We tested this possibility using derivatives of plasmid pBR322 carrying IS50 I or O end sequences. Tn5 inserted frequently into an IS50 I end at the major hotspot in pBR322, but not into either an I end or an O end 230 bp away from this hotspot. Adenine (dam) methylation at GATC sequences in the I end segment interferes with its use as the end of a transposon, but a dam- mutation did not affect Tn5 insertion relative to an I end sequence in target DNA. These results support models in which the ability of Tn5 to find its preferred sites depends on several features of DNA sequence and conformation, and in which target selection is distinct from recognition of the element ends during transposition.

Base Sequence↗

Deletions in plasmid pBR322: replication slippage involving leading and lagging strands.

We test here whether a class of deletions likely to result from errors during DNA replication arise preferentially during synthesis of either the leading or the lagging DNA strand. Deletions were obtained by reversion of particular insertion mutant alleles of the pBR322 amp gene. The alleles contain insertions of palindromic DNAs bracketed by 9-bp direct repeats of amp sequence; in addition, bp 2 to 5 in one arm of the palindrome form a direct repeat with 4 bp of adjoining amp sequence. Prior work had shown that reversion to Ampr results from deletions with endpoints in the 8- or 4-bp repeat, and that the 4-bp repeats are used preferentially because one of them is in the palindrome. To test the role of leading and lagging strand synthesis in deletion formation, we reversed the direction of replication of the amp gene by inverting the pBR322 replication origin, and also constructed new mutant alleles with a 4-bp repeat starting counterclockwise rather than clockwise of the insertion. In both cases the 4-bp repeats were used preferentially as deletion endpoints. A model is presented in which deletions arise during elongation of the strand that copies the palindrome before the adjoining 4-bp repeat, and in which preferential use of the 4-bp repeats independent of the overall direction of replication implies that deletions arise during syntheses of both leading and lagging strands.

Alleles↗

Limits to the role of palindromy in deletion formation.

We tested the effect of palindromy on deletion formation. This involved a study of reversion of insertion mutations in the pBR322 amp gene at a site where deletions end either in 9-bp direct repeats or in adjoining 4-bp direct repeats. Inserts of palindromic DNAs ranging from 10 to more than 26 bp and related nonpalindromic DNAs were compared. The frequency of deletions (selected as Ampr revertants) was stimulated by palindromy only at lengths greater than 26 bp. The 4-bp direct repeats, one component of which is located in the palindromic insert, were used preferentially as deletion endpoints with palindromes of at least 18 bp but not of 16 or 10 bp. We interpret these results with a model of slippage during DNA replication. Because deletion frequency and deletion endpoint location depend differently on palindrome length, we propose that different factors commit a molecule to undergo deletion and determine exactly where deletion endpoints will be.

Alleles↗

Specificity of deletion events in pBR322.

The reversion of mutations due to inserts of identical palindromic DNAs just 1-bp apart in the amp gene of plasmid pBR322 varied up to 3000-fold (U. DasGupta, K. Weston-Hafer, and D.E. Berg (1987) Genetics 115, 41-49). The experiments reported here show that the intrinsic frequencies of deletion from these sites are truly very different. Deletions were selected by the joint loss of sacB (sucrose sensitivity) and lacZ alpa genes cloned together at these sites, without requiring restoration of the ampr allele. We found that greater than 90% of deletions at each of these sites do restore the ampr allele. This result reinforces the view that the probability of forming a particular deletion depends strongly on the DNA sequence at its prospective endpoints.

Base Sequence↗

Palindromy and the location of deletion endpoints in Escherichia coli.

The contributions of direct and inverted repeats to deletion formation were studied by characterizing Ampr revertants of plasmids with a series of insertion mutations at a specific site in the pBR322 ampicillin resistance (amp) gene. The inserts at this site are palindromic, variable in length, and bracketed by 9- or 10-bp direct repeats of amp sequence. There is an additional direct repeat composed of 4 bp within the insert and 4 bp of adjoining amp sequence. DNA sequencing and colony hybridization of Ampr revertants showed that they contained either the parental amp sequence, implying deletion endpoints in the flanking 9- or 10-bp repeats, or a specific 1-bp substitution, implying endpoints in the 4-bp repeats. Although generally direct repeats seem to be used as deletion endpoints with a frequency proportional to their lengths, we found that with uninterrupted palindromes longer than 32 bp, the majority of deletions ended in the 4 bp, not the 9- or 10-bp repeats. This preferential use of the shorter direct repeats associated with palindromes is interpreted according to a DNA synthesis-error model in which hairpin structures formed by intrastrand pairing foster the slippage of nascent strands during DNA synthesis.

Alleles↗

Transposon Tn5 target specificity: preference for insertion at G/C pairs.

The procaryotic transposon Tn5 inserts into many different sites within a single gene, but some sites (hotspots) are targeted repeatedly. Hotspots are not closely related in sequence, but most have G/C pairs at the ends of the nine base pairs duplicated by Tn5 insertion. In pBR322, the major hotspot coincides with the "-10 region" of the tet promoter. We mutated the G/C pairs at this hotspot and assayed for insertion into hotspot I, resistance to tetracycline, and plasmid supercoiling. We found that changing the G/C pairs to A/T pairs reduced the frequency of insertion into the hotspot by at least fivefold. The reduction in hotspot use caused by these G/C to A/T changes was not attributable to changes in plasmid supercoiling or tet promoter strength.

Base Composition↗

Local DNA sequence control of deletion formation in Escherichia coli plasmid pBR322.

The specificity of deletion formation was studied using tests involving reversion of palindromic insertion mutations. Insertions of a Tn5-related transposon at 13 sites in the ampicillin-resistance (amp) gene of plasmid pBR322 were shortened to a nested set of perfect palindromes, 22, 32 and 90 bp long. We monitored frequencies of reversion to Ampr, which is the result of deletion of the palindrome plus one copy of the flanking 9 bp direct repeats (which had been formed by transposition). Revertant frequencies were found to depend on the location and the sequence of the palindromic insert. Changing a 45-kb interrupted palindrome to a 22-bp perfect palindrome stimulated deletion formation by factors of from fourfold to 545-fold among the 13 sites, while elongation of the perfect palindrome from 22 to 90 bp stimulated deletion formation by factors of from eight- to 18,000-fold. We conclude that deletion formation is strongly affected by subtle features of DNA sequence or conformation, both inside and outside the deleted segment, and that these effects may reflect specific interactions of DNA processing proteins with template DNAs.

Base Sequence↗