Biomedical subjects

Kangning Ren

Publications and source records attributed to Kangning Ren.

3 recordsLinked to original sources

PubMed2006

High-speed, whole-column fluorescence imaging detection for isoelectric focusing on a microchip using an organic light emitting diode as light source.

An integrated and simplified microfluidic device using a 250 microm x 1-4 cm of organic light emitting diode (OLED) array as a two-dimensional light source for single-channel and multichannel whole-column imaging detection was developed. This fluorescence detection system was used for isoelectric focusing (IEF) of R-phycoerythrin in a microchip. The IEF conditions were optimized, and the total analysis time was extremely reduced to 30 s for 2-cm-long microchannels at 700 V/cm of electric field strength without the presence of electroosmotic flow. The compression of pH gradient caused by electrolytes drawing into the microchannels was efficiently restrained when 1% hydroxylpropylmethyl cellulose in 2% ampholyte was used as the carrier for IEF. Under optimized IEF conditions, the detection limit of this system was approximately 0.6 microg/mL or 45 pg at 75 nL/column injection of R-phycoerythrin. This OLED-induced fluorescence detection system for WCID provides a high-speed IEF technique with quantitative ability and the potential for high integration and throughput microchip systems.

Fluorescence↗

PubMed2006

Off-line comprehensive two-dimensional high-performance liquid chromatography system with size exclusion column and reverse phase column for separation of complex traditional Chinese medicine Qingkailing injection.

A comprehensive two-dimensional liquid chromatography system was constructed on the combination of size exclusion chromatography (SEC) and reverse phase liquid chromatography (RPLC). The first dimension used a SEC column with 300 mm x 8mm i.d., packed with Toyopearl HW-40S. The column was eluted with 0.05 mol/l Tris-HCl (pH 6.9) at a flow rate of 0.4 ml/min. The second dimension used a RPLC column with 100 mm x 4.6mm i.d., which was operated in gradient form at a flow rate of 1.0 ml/min. An automatic switching valve was used to collect the effluent of the SEC column every 3 min, and the effluent was automatically injected into the RPLC column. Mass spectrometer was used for peak identification. This system was used to separate Qingkailing injection, a traditional Chinese medicine (TCM). The result showed that the total peak capacity of this system could reach 1134 and the qualitative analysis of seven chemical components of the Qingkailing injection was accomplished by this system. The results show that comprehensive two-dimensional liquid chromatography system is of great importance and high value in the separation of complex TCM.

Chromatography, High Pressure Liquid↗

PubMed2005

A microfluidic device using a green organic light emitting diode as an integrated excitation source.

A simply fabricated microfluidic device using a green organic light emitting diode (OLED) and thin film interference filter as integrated excitation source is presented and applied to fluorescence detection of proteins. A layer-by-layer compact system consisting of glass/PDMS microchip, pinhole, excitation filter and OLED is designed and equipped with a coaxial optical fiber and for fluorescence detection a 300 microm thick excitation filter is employed for eliminating nearly 80% of the unwanted light emitted by OLEDs which has overlaped with the fluorescence spectrum of the dyes. The distance between OLED illuminant and microchannels is limited to approximately 1 mm for sensitive detection. The achieved fluorescence signal of 300 microM Rhodamine 6G is about 13 times as high as that without the excitation filter and 3.5 times the result of a perpendicular detection structure. This system has been used for fluorescence detection of Rhodamine 6G, Alexa 532 and BSA conjugates in 4% linear polyacrymide (LPA) buffer (in 1 x TBE, pH 8.3) and 1.4 fmol and 35 fmol mass detection limits at 0.7 nl injection volume for Alexa and Rhodamine dye have been obtained, respectively.

Acrylic Resins↗