PubMed Health⌕ Search

Biomedical subjects

Karen A Law

Publications and source records attributed to Karen A Law.

4 recordsLinked to original sources
PubMed2005

Sonochemically fabricated acetylcholinesterase micro-electrode arrays within a flow injection analyser for the determination of organophosphate pesticides.

This report describes the development of novel sonochemically fabricated, bioengineered acetylcholinesterase and polyaniline carbon/cobalt phthalocyanine biosensors for the ultra-sensitive determination of a number of different pesticides. Arrays of this type typically have population micro-electrode densities of up to approximately 2 x 10(5) cm(-2); these represent the highest micro-electrode population densities reported to date by any fabrication means. The enzymatic response of the sensors is inhibited upon incubation with the pesticide, and we have shown that Dichlorvos, Parathion and Azinphos may be determined down to concentrations of approximately 1 x 10(-17) M, approximately 1 x 10(-16) M and approximately 1 x 10(-16) M, respectively. These lower limits of detection are lower than otherwise achievable by any other analytical approach. Measurements were performed within a custom built flow injection system that operates at a constant flow of 1 ml min(-1). Sensor stability studies were also performed whereby a stabilizer mixture of sucrose and polygalacturonic acid was added to the immobilised enzyme matrix at the working electrode and left to dry. Sixty-five percent of the initial enzyme activity was found to remain after a period of 92 days to allow storage of these electrodes and facilitating transportation if required.

Acetylcholinesterase↗
PubMed2004

Sonochemically fabricated microelectrode arrays for biosensors offering widespread applicability: Part I.

A novel and patented procedure is described for the sonochemical fabrication of a new class of microelectrode array based sensor with electrode element populations of up to 2 x 10(5) cm(-2). For some years it has been accepted that microelectrode arrays offer an attractive route for lowering minimum limits of detection and imparting stir (convectional mass transport) independence to sensor responses; despite this no commercial biosensors, to date, have employed microelectrode arrays, largely due to the cost of conventional fabrication routes that have not proved commercially viable for disposable devices. Biosensors formed by our sonochemical approach offer unrivalled sensitivity and impart stir independence to sensor responses. This format lends itself for mass fabrication due to the simplicity and inexpensiveness of the approach; in the first instance impedimetric and amperometric sensors are reported for glucose as model systems. Sensors already developed for ethanol, oxalate and a number of pesticide determinations will be reported in subsequent publications.

Biosensing Techniques↗
PubMed2003

A novel electro-optical sensor format with generic applicability for exploitation with NAD(P) dependent enzymes.

This paper describes the development of a novel optically interrogated enzyme electrode with generic applicability for NAD(P) dependent enzymes. The example reported here employs a multi-enzyme pathway comprising the enzymes pyruvate kinase, hexokinase, glucose-6-phosphate dehydrogenase and diaphorase. The final substrate of this pathway, dichlorophenol indophenol (DCPIP), was immobilised within an ultra-thin polymer film of o-phenylenediamine, itself electrochemically polymerised onto a conductive gold coating on the surface of a support polyethylene sheet. Dichlorophenol indophenol (DCPIP) absorbs within the visible region of the spectrum with a lambda(max) approximately 600 nm. When reduced, the molar absorption coefficient at this wavelength decreases significantly and DCPIP effectively becomes colourless (DCPIPH(3)). Ultra-thin layers of gold (<10 nm thickness) exhibit an optical absorption minimum at wavelengths of approximately 520 nm and therefore light within this region of the spectrum may be transmitted with relative ease through the polymer/gold/polyethylene optrode. Results presented within this paper show how this electro-optical sensor may be used to determine concentrations of adenosine triphosphate (ATP) within a sample. In the presence of ATP a colour change from blue to colourless was observed for DCPIP when the assay was performed in solution. However, when DCPIP was immobilised within a polymeric film onto the surface of gold coated electrodes, a colour change from blue to red was observed corresponding to a third redox state of DCPIP (DCPIPH).

2,6-Dichloroindophenol↗