PubMed Health⌕ Search

Biomedical subjects

Karen Köhler

Publications and source records attributed to Karen Köhler.

10 recordsLinked to original sources
PubMed2006

Thermal behavior of polyelectrolyte multilayer microcapsules: 2. Insight into molecular mechanisms for the PDADMAC/PSS system.

Polyelectrolyte multilayer capsules consisting of poly(diallyldimethylammonium chloride) (PDADMAC) and poly(styrene sulfonate) (PSS) were used as a model system to study the temperature-dependent behavior of polyelectrolyte multilayer films in aqueous media. Shells terminated with PSS shrink upon heating, whereas PDADMAC-terminated ones swell, independent of the nature of the first layer, as measured by means of confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM). Elemental analysis shows that the initial exponential layer growth of the film leads to a nearly neutral overall charge in the first case or a high positive excess charge in the latter. Depending on this overall charge either surface tension, due to an unfavorable polymer-solvent interaction, or electrostatics dominates, resulting in a shrinkage or expansion of capsules, respectively. Thus, it is possible to swell temperature-shrunk capsules by coating them with an additional PDADMAC layer. Micro-DSC measurements prove that polyelectrolyte multilayers undergo a glass transition in water at which the wall material softens, allowing the rearrangements to occur. It is found that the thermal history has an influence on the temperature behavior of capsules, especially on those ones terminated with PDADMAC. Also, the molecular weight of the polyelectrolytes affects the rearrangement of capsules. The lower the molecular weight and thus the smaller the entanglement of chains, the easier polyelectrolytes can rearrange.

Journal Article↗
PubMed2006

Salt-induced swelling-to-shrinking transition in polyelectrolyte multilayer capsules.

We study the size of polyelectrolyte multilayer capsules as a function of ionic strength, temperature, and time. A dynamic micromechanical model is developed which successfully describes the experiments. The model includes the polymer-solvent surface tension, an electrostatic force which is strongly ionic strength dependent, and a temperature-dependent mobility parameter. The activation of >50 kT suggests that multiple ion pairs must be broken simultaneously in the process of chain rearrangement. In support of our physical model capsules can repeatedly swell and shrink by varying ionic strength.

Journal Article↗
PubMed2006

Microcontainers with electrochemically reversible permeability.

The present study demonstrates a novel application of polyelectrolyte microcapsules as microcontainers with electrochemically reversible flux of redox active materials into and out of the capsule volume. Incorporation of the capsules inside the conducting polymer (polypyrrole) film results in a new composite electrode combining electrocatalytic and conducting properties of the polypyrrole with the storage and release properties of the capsules. This electrode, if loaded with electrochemical fuels, can possess electrochemically controlled switching between "open/closed" states of the capsule shell and be of practical interest for a new type of chemically rechargeable batteries or fuel cells. A special explanation for the potential depending loading and unloading of the capsule inner volume may be related to the fact that the polyelectrolyte capsules experience a potential gradient in the polypyrrole matrix within which the polyions of the shell can be moved.

Journal Article↗
PubMed2006

Temperature-dependent aggregation behavior of symmetric long-chain bolaamphiphiles at the air-water interface.

The behavior of the symmetric long-chain bolaamphiphiles dotriacontane-1,32-diyl bis[2-(trimethylammonio)ethyl phosphate] (PC-C32-PC), and dotriacontane-1,32-diyl bis[2-(dimethylammonio)ethyl phosphate] (Me(2)PE-C32-Me(2)PE) at the air-water interface was investigated by means of temperature-dependent film-balance measurements and Brewster angle microscopy. Upon compression of the monolayer the isotherms show a strong surface pressure increase. We assume that at high pressure the monolayer consists of molecules in a reversed U-shaped conformation. At an area of 0.9-1.1 nm(2) per molecule a plateau is reached for both bolaamphiphiles, which marks the beginning of an aggregate formation on the water surface. The plateau pressure increases with increasing temperature. For PC-C32-PC at 6.7 degrees C curved shorter fibrous domains with a diameter of 20-30 mum are seen on the water surface, whereas at 29.2 degrees C stripelike domains with a thickness of 200-500 mum are observed. Isotherms recorded within this temperature range show a characteristic break within the steep slope marking a region where a mixture or a hybrid form of both structures exists. Me(2)PE-C32-Me(2)PE in its zwitterionic state at low pH forms microcrystals on the water surface, whose formation is kinetically retarded. Depending on the temperature, the aqueous subphase is more or less homogeneously covered with a crystalline-like film. In contrast, no aggregates are observed at pH 10 when the bolaamphiphile is negatively charged.

Journal Article↗
PubMed2005

Thermal behavior of polyelectrolyte multilayer microcapsules. 1. The effect of odd and even layer number.

The temperature-dependent behavior of hollow polyelectrolyte multilayer capsules consisting of poly(diallyldimethylammonium chloride) (PDADMAC) and poly(styrene sulfonate) (PSS) with a different number of layers was investigated in aqueous media using confocal laser scanning microscopy, scanning and transmission electron microscopy, atomic force microscopy, and elemental analysis. Capsules with an even number of layers exhibited a pronounced shrinking at elevated temperature resulting in a transition to a dense sphere, whereas capsules with an odd number of layers swelled during heating to 5-fold of their initial size followed by their rupture. This effect increases for odd layer numbers and decreases for even layer numbers with increasing layer number. According to elemental analysis, an excess of PDADMAC monomers exists within the multilayers of capsules with an odd number of layers leading to a repulsion between the positive charges, whereas shells with an even number of layers have a balanced ratio between the oppositely charged polyions, so that the temperature-dependent behavior is controlled by the different interactions between polyelectrolytes and the bulk water. At a certain temperature, the polyelectrolyte material softens thus facilitating any rearrangement. Besides incubation temperature, the duration of heating has an influence on the restructuring of the multilayers.

Electrolytes↗
PubMed2005

Nanoengineered polymer capsules: tools for detection, controlled delivery, and site-specific manipulation.

We present the concept of multifunctional nanoengineered polymer capsules and outline their applications as new drug delivery systems or supramolecular toolboxes containing, for example, enzymes capable of converting nontoxic prodrugs into toxic drugs at a designated location. Such functionalized nanocontainers offer a wide range of applications including enzymatic catalysis, controlled release, and directed drug delivery in medicine due to their multifunctionality. The unique advantage of capsules in comparison to other systems is that they can be functionalized or loaded simultaneously with the above-mentioned components, thus permitting multifunctional processes in single cells.

Animals↗
PubMed2004

Temperature-dependent behavior of a symmetric long-chain bolaamphiphile with phosphocholine headgroups in water: from hydrogel to nanoparticles.

The temperature-dependent self-assembly of the single-chain bolaamphiphile dotriacontan-1,1'-diyl-bis[2-(trimethylammonio)ethyl phosphate] (PC-C32-PC) was investigated by transmission electron microscopy (TEM), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FT-IR), X-ray scattering, rheological measurements, and dynamic light scattering (DLS). At room temperature this compound, in which two phosphocholine headgroups are connected by a C(32) alkyl chain, proved to be capable of gelling water very efficiently by forming a dense network of nanofibers (Kohler et al. Angew. Chem., Int. Ed. 2004, 43, 245). A specific feature of this self-assembly process is that it is not driven by hydrogen bonds but solely by hydrophobic interactions of the long alkyl chains. The nanofibers have a thickness of roughly the molecular length and show a helical superstructure. A model for the molecular structure of the fibrils which considers the extreme constitution of the bolaamphiphile is proposed. Upon heating the suspensions three different phase transitions can be detected. Above 49 degrees C, the temperature of the main transition where the alkyl chains become "fluid", a clear low-viscosity solution is obtained due to a breakdown of the fibrils into smaller aggregates. Through mechanical stress the gel structure can be destroyed as well, indicating a low stability of these fibers. The gel formation is reversible, but as a drastic rearrangement of the molecules takes place, metastable states occur.

Antifungal Agents↗