PubMed Health⌕ Search

Biomedical subjects

Keith R Fox

Publications and source records attributed to Keith R Fox.

At least 19 recordsLinked to original sources

DNA triple-helix formation at target sites containing duplex mismatches.

We have studied the formation of DNA triple helices at target sites that contain mismatches in the duplex target. Fluorescence melting studies were used to examine a series of parallel triple helices that contain all 64 N.XZ triplet combinations at the centre (where N, X and Z are each of the four natural DNA bases in turn). Similar experiments were also performed with N=bis-amino-U (BAU) (for stable recognition of AT base pairs) and N=S (for recognition of TA inversions). We find that the introduction of a duplex mismatch destabilises the C+.GZ, T.AZ and G.TZ triplets. A similar effect is seen with BAU.AZ triplets. In contrast, other base combinations, based on non-standard triplets such as C.AZ, T.TZ, G.CZ and A.CZ are stabilised by the presence of a duplex mismatch. In each case S binds to sites containing duplex mismatches better than the corresponding Watson-Crick base pairs.

Base Pair Mismatch↗

An extra dimension in nucleic acid sequence recognition.

Watson-Crick base pairing is a natural molecular recognition process that has been exploited in molecular biology and universally adopted in many fields. An additional mode of nucleic acid sequence recognition that could be used in combination with normal base pairing would add an exta dimension to nucleic acid interactions and open up many new applications. In principle the triplex approach could provide this if developed to recognize any DNA sequence. To this end modified nucleosides have been incorporated into triple-helix-forming oligonucleotides (TFOs) and used to recognize mixed sequence DNA with high selectivity and affinity at neutral pH. Continuing developments are directed towards improving TFO affinity at high pH and increasing triplex association kinetics. A number of applications of triplexes are currently being explored.

Base Pairing↗

A polarized-light spectroscopy study of interactions of a hairpin polyamide with DNA.

We here study the interactions of a polyamide with large DNA, and compare to those of minor groove binder distamycin (DST), including high ligand/DNA binding ratios. Specific as well as nonspecific binding is probed using polarized-light spectroscopy combined with singular value decomposition analysis. Circular and linear dichroism data confirm binding geometries consistent with minor groove binding for both of the ligands. Interestingly, at high and intermediate ligand/DNA ratios the polyamide exhibits no significant sequence discrimination between mixed-sequence (calf thymus) and AT DNA as compared to DST. Each ligand is concluded to exhibit two different binding modes depending upon ligand/DNA ratio and nucleo-base sequence. At high binding ratios, distinct differences between the ligands are observed: circular dichroism spectra exciton effects provide evidence of bimolecular interactions of the polyamide when bound to AT-DNA, whereas no effects are seen with DST or mixed-sequence DNA. Also linear dichroism indicates that a change in binding geometry occurs at high polyamide/AT ratios, and that the effect occurs only with polyamide in contrast to DST. Since the effect is insignificant with DST, or with calf thymus DNA, it is concluded that it relates to the sizes of the ligands and the minor grooves, becoming critical in the limit of crowding.

Animals↗

DNA sequence recognition by an imidazole-containing isopropyl-substituted thiazole polyamide (thiazotropsin B).

We have used DNA footprinting and fluorescence melting experiments to study the sequence specific binding of an imidazole-containing isopropyl-substituted thiazole polyamide (thiazotropsin B) to DNA. While the parent compound (thiazotropsin A) binds to the hexanucleotide sequence ACTAGT, changing one of the N-methylpyrrole groups to N-methylimidazole changes the preferred binding sequence to (A/T)CGCG(T/A). Experiments with DNA fragments that contain variants of this sequence suggest that the ligand can also bind, with lower affinity, to sequences which differ from this by 1bp in any position.

Base Sequence↗

A fast algorithm for the construction of universal footprinting templates in DNA.

We introduce and give a complete description of a new graph to be used for DNA sequencing questions. This graph has the advantage over the classical de Bruijn graph that it fully accounts for the double stranded nature of DNA, rather than dealing with single strands. Technically, our graph may be thought of as the quotient of the de Bruijn graph under the natural involution of sending a DNA strand to its complementary strand. However, this involution has fixed points, and this complicates the structure of the quotient graph which we have therefore modified herein. As an application and motivating example, we give an efficient algorithm for constructing universal footprinting templates for n-mers. This problem may be formulated as the task of finding a shortest possible segment of DNA which contains every possible sequence of base pairs of some fixed length n. Previous work by Kwan et al has attacked this problem from a numerical point of view and generated minimal length universal footprinting templates for n = 2, 3, 5, 7, together with unsubstantiated candidates for the case n = 4. We show that their candidates for n = 4 are indeed minimal length universal footprinting templates.

Algorithms↗

Combining nucleoside analogues to achieve recognition of oligopurine tracts by triplex-forming oligonucleotides at physiological pH.

We have used DNase I footprinting to examine DNA triple helix formation at a 12 base pair oligopurine.oligopyrimidine sequence, using oligonucleotides that contain combinations of 2'-aminoethoxy-5-(3-aminoprop-1-ynyl)uridine (bis-amino-U, BAU) and 3-methyl-2-aminopyridine (MeP) in place of T and C, respectively. This combination acts cooperatively to enable high affinity triple helix formation at physiological pH. The affinity depends on the number of substitutions and their arrangement; oligonucleotides in which these analogues are evenly distributed throughout the third strand bind much better than those in which they are clustered together.

Aminopyridines↗

Exceptionally slow kinetics of the intramolecular quadruplex formed by the Oxytricha telomeric repeat.

We examined the stability and kinetics of folding of the Oxytricha telomeric repeat sequence (G4T4)4. Fluorescence melting experiments show that this intramolecular quadruplex, which is more stable in potassium- than sodium-containing buffers, shows considerable hysteresis between the melting and annealing profiles, even when heated at a rate of 0.05 degrees C min(-1). Quantitative analysis of this hysteresis, together with temperature-jump relaxation experiments show that the dissociation is exceptionally slow with a half-life of about 10 years at 37 degrees C in the presence of 50 mM K+. The association reaction has a half-life of a few seconds at 37 degrees C, but becomes slower at elevated temperatures consistent with the suggestion that association occurs by a nucleation-zipper mechanism.

Animals↗

Efficient solid-phase-based total synthesis of the bisintercalator TANDEM.

[reaction: see text] In this article, the first solid-phase-based total synthesis of TANDEM, a synthetic analogue of triostin A, is described. In initial studies, the synthesis incorporated depsipeptide formation, introduction of chromophores, and disulfide bond formation on the solid phase, prior to a final solution-phase macrolactamization, to give the target molecule. Although pure TANDEM was obtained in an overall yield comparable to those for all syntheses to date, the yield of the final cyclization was low (11%). A more efficient approach involved removal from the solid phase prior to disulfide bond formation. The resulting linear peptide underwent macrolactamization under mild conditions and high dilution. Final disulfide bond formation was essentially quantitative and gave the target molecule, TANDEM, in an overall yield of 18%. The final compound was assessed for its ability to bind to 5'-TpA sequences on DNA by DNase I footprinting. This efficient synthesis sets the stage for a study of the structure-activity relationship of TANDEM and the natural product triostin A, with analogues containing "point mutations" at every site within the cyclic compounds.

Anti-Bacterial Agents↗

Four base recognition by triplex-forming oligonucleotides at physiological pH.

We have achieved recognition of all 4 bp by triple helix formation at physiological pH, using triplex-forming oligonucleotides that contain four different synthetic nucleotides. BAU [2'-aminoethoxy-5-(3-aminoprop-1-ynyl)uridine] recognizes AT base pairs with high affinity, (Me)P (3-methyl-2 aminopyridine) binds to GC at higher pHs than cytosine, while (A)PP (6-(3-aminopropyl)-7-methyl-3H-pyrrolo[2,3-d]pyrimidin-2(7H)-one) and S [N-(4-(3-acetamidophenyl)thiazol-2-yl-acetamide)] bind to CG and TA base pairs, respectively. Fluorescence melting and DNase I footprinting demonstrate successful triplex formation at a 19mer oligopurine sequence that contains two CG and two TA interruptions. The complexes are pH dependent, but are still stable at pH 7.0. BAU, (Me)P and (A)PP retain considerable selectivity, and single base pair changes opposite these residues cause a large reduction in affinity. In contrast, S is less selective and tolerates CG pairs as well as TA.

Base Pairing↗

Kinetic stability of intermolecular DNA quadruplexes.

Fluorescently labeled oligodeoxyribonucleotides containing a single tract of four successive guanines have been used to study the thermodynamic and kinetic properties of short intermolecular DNA quadruplexes. When these assemble to form intermolecular quadruplexes the fluorophores are in close proximity and the fluorescence is quenched. On raising the temperature these complexes dissociate and there is a large increase in fluorescence. These complexes are exceptionally stable in potassium-containing buffers, and possess Tm values that are too high to measure. Tm values were determined in sodium-containing buffers for which the rate of reannealing is extremely slow; the melting profiles are effectively irreversible, and the apparent melting temperatures are dependent on the rates of heating. The dissociation kinetics of these complexes was estimated by rapidly increasing the temperature and following the time-dependent changes in fluorescence. From these data we have estimated the half-lives of these quadruplexes at 37 degrees C. Addition of a T to the unlabeled end of the oligonucleotide increases quadruplex stability. In contrast, addition of a T between the fluorophore and the oligonucleotide leads to a decrease in stability.

Buffers↗

Stable recognition of TA interruptions by triplex forming oligonucleotides containing a novel nucleoside.

We have prepared the 2'-aminoethoxy derivative of the S nucleoside ((2AE)S) and incorporated it into triplex-forming oligonucleotides for recognition of TA interruptions within a target oligopurine tract. Fluorescence melting, UV melting, and DNase I footprinting experiments show that (2AE)S has greater affinity than G or S for a single TA interruption. Stable triplexes are formed at pH 6.0 at an 18-mer target site containing two TA interruptions, even though this contains eight C(+).GC triplets. Although (2AE)S and S produce stable triplexes at TA interruptions, they also interact with other base pairs, in particular, CG, although the selectivity for TA improves with increased pH.( 2AE)S is the best nucleoside described so far for recognition of TA within a triple-helix target.

Base Sequence↗

Inosine substitutions demonstrate that intramolecular DNA quadruplexes adopt different conformations in the presence of sodium and potassium.

We have examined the stability of fluorescently-labelled oligonucleotides that are based on the human telomeric repeat [(GGGTTA)(3)GGG], in which one of the guanines in turn is substituted with inosine. We show that the relative stability of the substitutions is different in the presence of sodium and potassium. The data for potassium suggest a parallel arrangement of the strands, while the sodium form is mixed parallel and antiparallel.

Animals↗

Effects of a hairpin polyamide on DNA melting: comparison with distamycin and Hoechst 33258.

We have used DNase I footprinting and fluorescence melting studies to study the interaction of the hairpin polyamide Im-Py-Py-Py-(R)H2Ngamma-Im-Py-Py-Py-beta-Dp with its preferred binding sites (5'-WGWWCW; W=A or T) and other sequences. DNase I footprinting confirmed that the ligand binds to the sequence AGAACA at nanomolar concentrations and that changing the terminal A to G causes a dramatic decrease in affinity, while there was no interaction with the reverse sequence WCWWGW. Fluorescence melting studies with 11-mer duplexes showed that the polyamide had very different effects on the forward (TGWWCT) and reverse (TCTAGT) sequences. At low concentrations, the polyamide produced biphasic melting curves with TGATCT, TGTACT and TGAACT, suggesting a strong interaction. In contrast, the melting profiles with TCTAGT were always monophasic and showed much smaller concentration dependent changes in Tm. The polyamide also showed weak binding to the sequence TGATCT when one of the central AT pairs was replaced with an AC mismatch. These melting profiles were compared with those produced by the AT-selective minor groove binding agents distamycin and Hoechst 33258 at the same sites and at similar sequences containing A5 and (AT)3, which are expected to bind distamycin in the 1:1 and 2:1 modes, respectively. These ligands produced simple monophasic melting curves in which the Tm steadily increased as the ligand concentration was raised.

Base Pair Mismatch↗

Selectivity and affinity of triplex-forming oligonucleotides containing 2'-aminoethoxy-5-(3-aminoprop-1-ynyl)uridine for recognizing AT base pairs in duplex DNA.

We have used DNase I footprinting, fluorescence and ultraviolet (UV) melting experiments and circular dichroism to demonstrate that, in the parallel triplex binding motif, 2'-aminoethoxy-5-(3-aminoprop-1-ynyl)uridine (bis-amino-U, BAU) has very high affinity for AT relative to all other Watson-Crick base pairs in DNA. Complexes containing two or more substitutions with this nucleotide analogue are stable at pH 7.0, even though they contain several C.GC base triplets. These modified triplex-forming oligonucleotides retain exquisite sequence specificity, with enhanced discrimination against YR base pairs (especially CG). These properties make BAU a useful base analogue for the sequence-specific creation of stable triple helices at pH 7.0.

Adenine↗

DNA sequence recognition by an isopropyl substituted thiazole polyamide.

We have used DNA footprinting and fluorescence melting experiments to study the sequence-specific binding of a novel minor groove binding ligand (thiazotropsin A), containing an isopropyl substituted thiazole polyamide, to DNA. In one fragment, which contains every tetranucleotide sequence, sub-micromolar concentrations of the ligand generate a single footprint at the sequence ACTAGT. This sequence preference is confirmed in melting experiments with fluorescently labelled oligonucleotides. Experiments with DNA fragments that contain variants of this sequence suggest that the ligand also binds, with slightly lower affinity, to sequences of the type XCYRGZ, where X is any base except C, and Z is any base except G.

Base Sequence↗

Influence of loop size on the stability of intramolecular DNA quadruplexes.

We have determined the stability of intramolecular DNA quadruplexes in which the four G(3)-tracts are connected by non-nucleosidic linkers containing propanediol, octanediol or hexaethylene glycol, replacing the TTA loops in the human telomeric repeat sequence. We find that these sequences all fold to form intramolecular complexes, which are stabilized by lithium < sodium < potassium. Quadruplex stability increases in the order propanediol < hexaethylene glycol < octanediol. The shallower shape of the melting profile with propanediol linkers and its lower dependency on potassium concentration suggests that this complex contains fewer stacks of G-quartets. The sequence with octanediol linkers displays a biphasic melting profile, suggesting that it can adopt more than one stable structure. All these complexes display melting temperatures above 310 K in the presence of 10 mM lithium, without added potassium, in contrast to the telomeric repeat sequence. These complexes also fold much faster than the telomeric repeat and there is little or no hysteresis between their melting and annealing profiles. In contrast, the human telomeric repeat sequence and a complex containing two hexaethylene glycol groups in each loop, are less stable and fold more slowly. The melting and annealing profiles for the latter sequence show significant differences, even when heated at 0.2 degrees C min(-1). CD spectra for the oligonucleotides containing non-nucleosidic linkers show positive maxima at 264 nm, with negative minima approximately 244 nm, which are characteristic of parallel quadruplex structures. These results show that the structure and stability of intramolecular quadruplexes is profoundly influenced by the length and composition of the loops.

Circular Dichroism↗