A 1:1 copper-dioxygen adduct is an end-on bound superoxo copper(II) complex which undergoes oxygenation reactions with phenols.
Explore the source record for details and available documents.
Copper↗
Biomedical subjects
Kenneth D Karlin
Publications and source records attributed to Kenneth D Karlin.
Thioether sulfur oxygenation from O2 or H2O2 reactivity of copper complexes with tridentate N2Sthioether ligands.
To model thioether-copper coordination chemistry including oxidative reactivity, such as occurs in the copper monooxygenases peptidylglycine -hydroxylating monooxygenase (PHM) and dopamine beta-hydroxylase (DbetaH), we have synthesized new tridentate N2S ligands LSEP and LSBz [LSEP = methyl(2-phenethylsulfanylpropyl)(2-pyridin-2-ylethyl)amine; LSBz = (2-benzylsulfanylpropyl)methyl(2-pyridin-2-ylethyl)amine)]. Both copper(I) and copper(II) complexes have been prepared, and their respective O2 and H2O2 chemistry has been studied. Under mild conditions, oxygenation of [(LSEP)CuI]+ (1a) and [(LSBz)CuI]+ (2a) leads to ligand sulfoxidation, thus exhibiting copper monooxygenase activity. A copper(II) complex of this sulfoxide ligand product, [(LSOEP)CuII(CH3OH)(OClO3)2], has been structurally characterized, demonstrating Cu-Osulfoxide ligation. The X-ray structure of [(LSEP)CuII(H2O)(OClO3)]+ (1b) and its solution UV-visible spectral properties [S-CuII LMCT band at 365 nm (MeCN solvent); epsilon = 4285 M-1 cm-1] indicate the thioether sulfur atom is bound to the cupric ion in both the solid (CuII-S distance: 2.31 A) and solution states. Reaction of 1b with H2O2 leads to sulfonation via the sulfoxide; excess hydrogen peroxide gives mostly sulfone product. These results may provide some insight into recent reports concerning protein methionine oxidation, showing the potential importance of copper-mediated oxidation processes in certain biological settings.
Copper↗
Dioxygen reactivity of a copper(I) complex with a N3S thioether chelate; peroxo-dicopper(II) formation including sulfur-ligation.
Employing a tetradentate N3S(thioether) ligand, LN3S, dioxygen reactivity of a copper(I) complex, [(LN3S)CuI]+ (1) was examined. In CH2Cl2, acetone (at -80 degrees C), or 2-methyltetrahydrofuran (at -128 degrees C), 1 reacts with O2 producing the end-on bound peroxodicopper(II) complex [{(LN3S)CuII}2(mu-1,2-O2(2-))]2+ (2), the first reported copper-dioxygen adduct with sulfur (thioether) ligation. Its absorption spectrum contains an additional low-energy feature (but not a Cu-S CT band) compared to the previously well-characterized N4 ligand complex, [{(TMPA)CuII}2(mu-1,2-O2(2-))]2+ (3) (TMPA = tris(2-pyridylmethyl)amine). Resonance Raman spectroscopy confirms the peroxo formulation {nu(O-O) = 817 cm-1 (16-18O2 Delta = 46 cm-1) and nu(Cu-O) = 545 cm-1 (16-18O2 Delta = 26 cm-1), in close analogy to that known for 3 {nu(O-O) = 827 cm-1 and nu(Cu-O) = 561 cm-1}. Direct evidence for thioether ligation comes from EXAFS spectroscopy {Cu K-edge; Cu-S = 2.4 A}.
Acetone↗
Targeted guanine oxidation by a dinuclear copper(II) complex at single stranded/double stranded DNA junctions.
A dinuclear copper(II) complex [Cu(II)2(PD'O-)(H2O)2](ClO4)3 (5) with terminal Cu(II)-H(2)O moieties and a Cu...Cu distance of 4.13 A (X-ray structure) has been synthesized and characterized by EPR spectroscopy (ferromagnetic coupling observed) and cyclic voltammetry. Dizinc(II) and mononuclear copper(II) analogues [Zn(II)2(PD'O-)(H2O)2]3+ (7) and [Cu(II)(mPD'OH)(H2O)]2+ (6), respectively, have also been synthesized and structurally characterized. Reacting 5/MPA/O(2) (MPA = 3-mercaptopropionic acid) with DNA leads to a highly specific oxidation of guanine (G) at a junction between single- and double-stranded DNA. Mass spectrometric analysis of the major products indicates a gain of +18 and +34 amu relative to initial DNA strands. The most efficient reaction requires G at the first and second unpaired positions of each strand extending from the junction. Less reaction is observed for analogous targets in which the G cluster is farther from the junction or contains less than four Gs. Consistent with our previous systems, the multinuclear copper center is required for selective reaction; mononuclear complex 6 is not effective. Hydrogen peroxide as a substitute for MPA/O2 also does not lead to activity. Structural analysis of a [Cu(II)2(PD'O-)(G)]3+ complex (8) and dizinc analogue [Zn(II)(2)(PD'O-)(G)](ClO4)3 (9) (G = guanosine) reveals coordination of the G O6 and N7 atoms with the two copper (or zinc) centers and suggests that copper-G coordination likely plays a role in recognition of the DNA target. The Cu2-O2 intermediate responsible for guanine oxidation appears to be different from that responsible for direct-strand scission induced by other multinuclear copper complexes; the likely course of reaction is discussed.
3-Mercaptopropionic Acid↗
Reactivity study of a hydroperoxodicopper(II) complex: hydroxylation, dehydrogenation, and ligand cross-link reactions.
Employing a binucleating phenol-containing ligand PD'OH, a mu-phenoxo-mu-hydroperoxo dicopper(II) complex [Cu(II)2(PD'O-)(-OOH)(RCN)2](ClO4)2 (1, R = CH3, CH3CH2 or C6H5CH2; lambda(max) = 407 nm; nu(O-O) = 870 cm(-1); J. Am. Chem. Soc. 2005, 127, 15360) is generated by reacting a precursor dicopper(I) complex [Cu(I)2(PD'OH)(CH3CN)2](ClO4)2 (2) with O2 in nitrile solvents at -80 degrees C. Species 1 is unable to oxidize externally added substrates, for instance, PPh3, 2,4-tert-butylphenol, or 9,10-dihydroanthracene. However, upon thermal decay, it hydroxylates copper-bound organocyanides (e.g., benzylcyanide), leading to the corresponding aldehyde while releasing cyanide. This chemistry mimics that known for the copper enzyme dopamine-beta-monooxygenase. The thermal decay of 1 also leads to a product [Cu(II)3(L")2(Cl-)2](PF6)2 (6); its X-ray structure reveals that L" is a Schiff base-containing ligand which apparently derives from both oxidative N-dealkylation and then oxidative dehydrogenation of PD'OH; the chloride presumably derives from the CH2Cl2 solvent. With an excess of PPh3 added to 1, a binuclear Cu(I) complex [Cu(I)2(L')(PPh3)2](ClO4)2 (5) with a cross-linked PD'OH ligand L' has also been identified and crystallographically and chemically characterized. The newly formed C-O bond and an apparent k(H)/k(D) = 2.9 +/- 0.2 isotope effect in the benzylcyanide oxidation reaction suggest a common ligand-based radical forms during compound 1 thermal decay reactions. A di-mu-hydroxide-bridged tetranuclear copper(II) cluster compound [{Cu(II)2(PD'O-)(OH-)}2](ClO4)4 (8) has also been isolated following warming of 1. Its formation is consistent with the generation of [Cu(II)2(PD'O-)(OH-)]2+, with dimerization a reflection of the large Cu...Cu distance and thus the preference for not having a second bridging ligand atom (in addition to the phenolate O) for dicopper(II) ligation within the PD'O- ligand framework.
Copper↗
Selective DNA strand scission with binuclear copper complexes: implications for an active Cu2-O2 species.
A homologous series of binuclear copper(II) complexes [Cu(II)(2)(Nn)(Y)(2)](2+) (1-3) (n = 3-5 and Y = (ClO(4))(-) or (NO(3))(-)) were studied to investigate the intermediate(s) responsible for selective DNA strand scission in the presence of MPA/O(2) (MPA = 3-mercaptopropanoic acid). While the N3 complex does not react, the N4 and N5 analogues show comparable activity with strand scission occurring at a single-strand/double-strand junction. Identical reactivity is also observed in the alternate presence of H(2)O(2). Spectroscopic and reactivity studies with [Cu(II)(2)(N4)(Y)(2)](2+) (2) and H(2)O(2) are consistent with DNA oxidation mediated by formation of a side-on peroxodicopper(II) (Cu(2)-O(2)) complex.
3-Mercaptopropionic Acid↗
Copper-dioxygen adducts and the side-on peroxo dicopper(II)/bis(mu-oxo) dicopper(III) equilibrium: Significant ligand electronic effects.
The variation of ligand para substituents on pyridyl donor groups of tridentate amine copper(I) complexes was carried out in order to probe electronic effects on the equilibrium between mu-eta2:eta2-(side-on)-peroxo [Cu(II)2(O2(2-))]2+ and bis(mu-oxo) [Cu(III)2(O(2-))2] species formed upon reaction with O2. [Cu(I)(R-PYAN)(MeCN)n]B(C6F5)4 (R-PYAN = N-[2-(4-R-pyridin-2-yl)-ethyl]-N,N',N'-trimethyl-propane-1,3-diamine, R = NMe2, OMe, H, and Cl) (1R) vary over a narrow range in their Cu(II)/Cu(I) redox potentials (E(1/2) vs Fe(cp)2(+/0) = -0.40 V for 1(NMe2), -0.38 V for 1(OMe), -0.33 V for 1H, and -0.32 V for 1Cl) and in C-O stretching frequencies of their carbonyl adducts, 1R-CO: nu(C-O) = 2080, 2086, 2088, and 2090 cm(-1) for R = NMe2, OMe, H, and Cl, respectively. However, within this range of electronic properties for 1R, dioxygen reactivity is significantly affected. The reaction of 1Cl or 1H with O2 at -78 degrees C in CH2Cl2 gives UV-vis and resonance Raman spectra indicative of a mu-eta2:eta2-(side-on)-peroxo dicopper(II) adduct (2R). Compound 1(OMe) reacts with O2, yielding equilibrium mixtures of side-on peroxo (2(OMe)) and bis(mu-oxo) (3(OMe)) species. Oxygenation of 1(NMe2) leads to the sole generation of the bis(mu-oxo) dicopper(III) complex (3(NMe2)). A solvent effect was also observed; in acetone or THF, increased ratios of bis(mu-oxo) relative to side-on peroxo complex are observed. Thus, the equilibrium between a dicopper side-on peroxo and bis(mu-oxo) species can be tuned by ligand design-specifically, more electron donating ligands favor the formation of the latter isomer, and the peroxo/bis(mu-oxo) equilibrium can be shifted from one extreme to the other within the same ligand system. Observations concerning the reactivity of the dioxygen adducts 2H and 3(NMe2) toward external substrates are also presented.
Carbon Monoxide↗
A mu-eta2:eta2-disulfide dicopper(II) complex from reaction of S8 with a copper(I) precursor: reactivity of the bound disulfur moiety.
Explore the source record for details and available documents.
Crystallography, X-Ray↗
A molecular pinwheel multicopper(I) cluster, [(L(S-))6Cu(I)13(S2-)2]3+ with mu4-sulfido, mu3-thiolato and nitrogen ligands.
A copper(I) complex with new N2S thiol ligand transforms to a multicopper(I) cluster, [(L(S-))6Cu(I)13(S2-)2]3+ (1); its X-ray structure exhibiting mu4-sulfido and mu3-thiolato coordination is presented and compared to other cuprous thiolato/sulfido clusters including that observed in the copper enzyme nitrous oxide reductase.
Binding Sites↗
Exogenous nitrile substrate hydroxylation by a new dicopper-hydroperoxide complex.
A dicopper(I)/phenol-ligand complex in RCN solvents reacts with O2 producing a mu-1,1-hydroperoxo dicopper(II) species. Subsequent thermal transformation results in nitrile hydroxylation and elimination of cyanide, as revealed by the isolation in comparable yields of (i) a cyanide-bridged tetranuclear cluster complex and (ii) benzaldehyde (for R = PhCH2); 18O labeling confirms that the PhC(O)H oxygen atom derives from O2.
Biomimetics↗
Tridentate copper ligand influences on heme-peroxo-copper formation and properties: reduced, superoxo, and mu-peroxo iron/copper complexes.
In cytochrome c oxidase synthetic modeling studies, we recently reported a new mu-eta2:eta2-peroxo binding mode in the heteronuclear heme/copper complex [(2L)Fe(III)-(O2(2-))-CuII]+ (6) which is effected by tridentate copper chelation (J. Am. Chem. Soc. 2004, 126, 12716). To establish fundamental coordination and O2-reactivity chemistry, we have studied and describe here (i) the structure and dioxygen reactivity of the copper-free compound (2L)FeII (1), (ii) detailed spectroscopic properties of 6 in comparisons with those of known mu-eta2:eta1 heme-peroxo-copper complexes, (iii) formation of 6 from the reactions of [(2L)FeIICuI]+ (3) and dioxygen by stopped-flow kinetics, and (iv) reactivities of 6 with CO and PPh3. In the absence of copper, 1 serves as a myoglobin model compound possessing a pyridine-bound five-coordinate iron(II)-porphyrinate which undergoes reversible dioxygen binding. Oxygenation of 3 below -60 degrees C generates the heme-peroxo-copper complex 6 with strong antiferromagnetic coupling between high-spin iron(III) and copper(II) to yield an S = 2 spin system. Stopped-flow kinetics in CH2Cl2/6% EtCN show that dioxygen reacts with iron(II) first to form a heme-superoxide moiety, [(EtCN)(2L)FeIII-(O2-)...CuI(EtCN)]+ (5), which further reacts with Cu(I) to generate 6. Compared to those properties of a known mu-eta2:eta1-heme-peroxo-copper complex, 6 has a significantly diminished resonance Raman nu(O-O) stretching frequency at 747 cm(-1) and distinctive visible absorptions at 485, 541, and 572 nm, all of which seem to be characteristics of a mu-eta2:eta2-heme-peroxo-copper system. Addition of CO or PPh3 to 6 yields a bis-CO adduct of 3 or a PPh(3) adduct of 5, the latter with a remaining FeIII-(O2-) moiety.
Copper↗
Oxygen binding and activation by the complexes of PY2- and TPA-appended diphenylglycoluril receptors with copper and other metals.
The copper(I) complexes of diphenylglycoluril basket receptors and , appended with bis(2-ethylpyridine)amine (PY2) and tris(2-methylpyridine)amine (TPA), respectively, and their dioxygen adducts were studied with low-temperature UV-vis and X-ray absorption spectroscopy (XAS). The copper(I) complex of, [.Cu(I)2] or, forms a micro-eta2:eta2 dioxygen complex, whereas the copper(I) complex of, [.Cu(I)2] or, does not form a well defined dioxygen complex, but is oxidized to Cu(II). Dioxygen is bound irreversibly to and the formed complex is stable over time. The coordination geometries of the above complexes were determined by XAS, which revealed that pyridyl groups and amine N-donors participate in the coordination to Cu(I) ions in the complexes of both receptors. The catalytic activities of various metal complexes of and , that were designed as mimics of dinuclear copper enzymes that can activate dioxygen, were investigated. Phenolic substrates that were expected to undergo aromatic hydroxylation, showed oxidative polymerization without insertion of oxygen. The mechanism of this polymerization turns out to be a radical coupling reaction as was established by experiments with the model substrate 2,4-di-tert-butylphenol. In addition to Cu(II), the Mn(III) complex of and the Fe(II) complex of were tested as oxidation catalysts. Oxidation of catechol was observed for the Cu(II) complex of receptor but the other metal complexes did not lead to oxidation.
Alkynes↗
Geometric and electronic structure of the heme-peroxo-copper complex [(F8TPP)FeIII-(O22-)-CuII(TMPA)](ClO4).
The geometric and electronic structure of the untethered heme-peroxo-copper model complex [(F(8)TPP)Fe(III)-(O(2)(2)(-))-Cu(II)(TMPA)](ClO(4)) (1) has been investigated using Cu and Fe K-edge EXAFS spectroscopy and density functional theory calculations in order to describe its geometric and electronic structure. The Fe and Cu K-edge EXAFS data were fit with a Cu...Fe distance of approximately 3.72 A. Spin-unrestricted DFT calculations for the S(T) = 2 spin state were performed on [(P)Fe(III)-(O(2)(2)(-))-Cu(II)(TMPA)](+) as a model of 1. The peroxo unit is bound end-on to the copper, and side-on to the high-spin iron, for an overall mu-eta(1):eta(2) coordination mode. The calculated Cu...Fe distance is approximately 0.3 A longer than that observed experimentally. Reoptimization of [(P)Fe(III)-(O(2)(2)(-))-Cu(II)(TMPA)](+) with a 3.7 A Cu...Fe constrained distance results in a similar energy and structure that retains the overall mu-eta(1):eta(2)-peroxo coordination mode. The primary bonding interaction between the copper and the peroxide involves electron donation into the half-occupied Cu d(z)2 orbital from the peroxide pi(sigma) orbital. In the case of the Fe(III)-peroxide eta(2) bond, the two major components arise from the donor interactions of the peroxide pi*(sigma) and pi*(v) orbitals with the Fe d(xz) and d(xy) orbitals, which give rise to sigma and delta bonds, respectively. The pi*(sigma) interaction with both the half-occupied d(z)2 orbital on the copper (eta(1)) and the d(xz) orbital on the iron (eta(2)), provides an effective superexchange pathway for strong antiferromagnetic coupling between the metal centers.
Copper↗
Recognition of guanines at a double helix-coil junction in DNA by a trinuclear copper complex.
Coordination between guanine N7 and a trinuclear copper complex appears critical for selective and efficient strand scission of DNA at a helix-coil junction as indicated by the lack of reactivity of comparable DNA containing 7-deazaguanine in place of guanine; both the base pair at the junction and coil flexibility also modulate the specificity of DNA oxidation.
Copper↗
Photoinduced carbon monoxide migration in a synthetic heme-copper complex.
Time-resolved infrared (TRIR) flash photolytic techniques have been employed to initiate and observe the efficient dissociation of CO from a synthetic heme-CO/copper complex, [((6)L)Fe(II)(CO)..Cu(I)](+) (2), in CH(3)CN and acetone at room temperature. In CH(3)CN, a significant fraction of the photodissociated CO molecules transiently bind to copper (nu(CO)(Cu) = 2091 cm(-)(1)) giving [((6)L)Fe(II)..Cu(I)(CO)](+) (4), with an observed rate constant, k(1) = 1.5 x 10(5) s(-)(1). That is followed by a slower direct transfer of CO from the copper moiety back to the heme (nu(CO)(Fe) = 1975 cm(-)(1)) with k(2) = 1600 s(-)(1). Additional transient absorption (TA) UV-vis spectroscopic experiments have been performed monitoring the CO-transfer reaction by following the Soret band. Eyring analysis of the temperature-dependent data yields DeltaH(double dagger) = 43.9 kJ mol(-)(1) for the 4-to-2 transformation, similar to that for CO dissociation from [Cu(I)(tmpa)(CO)](+) in CH(3)CN (DeltaH(double dagger) = 43.6 kJ mol(-)(1)), suggesting CO dissociation from copper regulates the binding of small molecules to the heme within [((6)L)Fe(II)..Cu(I)](+)(3). Our observations are analagous to those observed for the heme(a3)/Cu(B) active site of cytochrome c oxidase, where photodissociated CO from the heme(a3) site immediately (ps) transfers to Cu(B) followed by millisecond transfer back to the heme.
Carbon Monoxide↗
Substrate oxidation by copper-dioxygen adducts: mechanistic considerations.
A series of copper-dioxygen adducts [{Cu(II)(MePY2)(R)}(2)(O(2))](B(C(6)F(5))(4))(2) (1(R)()), systematically varying in their electronic properties via ligand pyridyl donor substituents (R = H, MeO, and Me(2)N), oxidize a variety of substrates with varying C-H or O-H bond dissociation enthalpies. Detailed mechanistic studies have been carried out, including investigation of 1(R)() thermodynamic redox properties, 1(R)() tetrahydrofuran (THF) and N,N'-dimethylaniline (DMA) oxidation kinetics (including analyses of substrate dicopper binding equilibria), and application of mechanistic probes (N-cyclopropyl-N-methylaniline (CMA) and (p-methoxyphenyl)-2,2-dimethylpropanol (MDP)), which can distinguish if proton-coupled electron-transfer (PCET) processes proceed through concerted electron-transfer proton-transfer (ETPT) or consecutive electron-transfer proton-transfer (ET/PT) pathways. The results are consistent with those of previous complementary studies; at low thermodynamic driving force for substrate oxidation, an ET/PT is operable, but once ET (i.e., substrate one-electron oxidation) becomes prohibitively uphill, the ETPT pathway occurs. Possible differences in coordination structures about 1(Me)()()2(N)()/1(MeO)() compared to those of 1(H)() are also used to rationalize some of the observations.
Aniline Compounds↗
Heme/non-heme diiron(II) complexes and O2, CO, and NO adducts as reduced and substrate-bound models for the active site of bacterial nitric oxide reductase.
As a first generation model for the reactive reduced active-site form of bacterial nitric oxide reductase, a heme/non-heme diiron(II) complex [(6L)Fe(II)...Fe(II)-(Cl)]+ (2) {where 6L = partially fluorinated tetraphenylporphyrin with a tethered tetradentate TMPA chelate; TMPA = tris(2-pyridyl)amine} was generated by reduction of the corresponding mu-oxo diferric compound [(6L)Fe(III)-O-Fe(III)-Cl]+ (1). Coordination chemistry models for reactions of reduced NOR with O2, CO, and NO were also developed. With O2 and CO, adducts are formed, [(6L)Fe(III)(O2-))(thf)...Fe(II)-Cl]B(C6F5)4 (2a x O2) {lambda(max) 418 (Soret), 536 nm; nu(O-O) = 1176 cm(-1), nu(Fe-O) = 574 cm(-1) and [(6L)Fe(II)(CO)(thf)Fe(II)-Cl]B(C6F5)4 (2a x CO) {nu(CO) 1969 cm(-1)}, respectively. Reaction of purified nitric oxide with 2 leads to the dinitrosyl complex [(6L)Fe(NO)Fe(NO)-Cl]B(C6F5)4 (2a x (NO)2) with nu(NO) absorptions at 1798 cm(-1) (non-heme Fe-NO) and 1689 cm(-1) (heme-NO).
Binding Sites↗
Dioxygen reactivity of copper and heme-copper complexes possessing an imidazole-phenol cross-link.
Recent spectroscopic, kinetics, and structural studies on cytochrome c oxidases (CcOs) suggest that the histidine-tyrosine cross-link at the heme a3-CuB binuclear active site plays a key role in the reductive O2-cleavage process. In this report, we describe dioxygen reactivity of copper and heme/Cu assemblies in which the imidazole-phenol moieties are employed as a part of copper ligand LN4OH (2-{4-[2-(bis-pyridin-2-ylmethyl-amino)-ethyl]-imidazol-1-yl}-4,6-di -tert-butyl-phenol). Stopped-flow kinetic studies reveal that low-temperature oxygenation of [CuI(LN4OH)]+ (1) leads to rapid formation of a copper-superoxo species [CuII(LN4OH)(O2-)]+ (1a), which further reacts with 1 to form the 2:1 Cu:O2 adduct, peroxo complex [{CuII(LN4OH)}2(O2(2-))]2+ (1b). Complex 1b is also short-lived, and a dimer Cu(II)-phenolate complex [CuII(LN4O-)]2(2+) (1c) eventually forms as a final product in the later stage of the oxygenation reaction. Dioxygen reactivities of 1 and its anisole analogue [CuI(LN4OMe)]+ (2) in the presence of a heme complex (F8)FeII (3) (F8 = tetrakis(2,6,-difluorotetraphenyl)-porphyrinate) are also described. Spectroscopic investigations including UV-vis, 1H and 2H NMR, EPR, and resonance Raman spectroscopies along with spectrophotometric titration reveal that low-temperature oxygenation of 1/3 leads to formation of a heme-peroxo-copper species [(F8)FeIII-(O2(2-))-CuII(LN4OH)]+ (4), nu(O-O) = 813 cm(-1). Complex 4 is an S = 2 spin system with strong antiferromagnetic coupling between high-spin iron(III) and copper(II) through a bridging peroxide ligand. A very similar complex [(F8)FeIII-(O2(2-))-CuII(LN4OMe)]+ (5) (nu(O-O) = 815 cm(-1)) can be generated by utilizing the anisole compound 2, which indicates that the cross-linked phenol moiety in 4 does not interact with the bridging peroxo group between heme and copper. This investigation thus reveals that a stable heme-peroxo-copper species can be generated even in the presence of an imidazole-phenol group (i.e., possible electron/proton donor source) in close proximity. Future studies are needed to probe key factors that can trigger the reductive O-O cleavage in CcO model compounds.
Copper↗