Biomedical subjects

Kenneth T V Grattan

Publications and source records attributed to Kenneth T V Grattan.

9 recordsLinked to original sources

PubMed2005

Numerical modeling of polarization conversion in semiconductor electro-optic modulators.

An accurate numerical simulation study of a polarization conversion phenomenon in deeply etched semiconductor electro-optic waveguide modulators is presented. Based on a powerful and versatile finite element package, the effect of various imperfect fabrication conditions on unwanted and unexpected polarization conversion in electro-optic semiconductor modulators is, for the first time to our knowledge reported and explained in terms of its origin.

Journal Article↗

PubMed2004

Rigorous comparison of parabolically tapered and conventional multimode-interference-based 3-dB power splitters in InGaAsP/InP waveguides.

Design issues such as optical transmission, interference mechanisms, the splitting ratio, the polarization dependence, and the fabrication tolerances of a compact parabolically tapered multimode-interference (MMI)-based 3-dB power splitter on an InP-based deeply etched ridge waveguide, by use of the finite-element-based beam-propagation method, are presented. The benefits and drawbacks of the use of the tapered structure, in comparison with an untapered MMI-based 3-dB splitter, have also been investigated.

Journal Article↗

PubMed2004

High-temperature sustainability of strong fiber Bragg gratings written into Sb-Ge-codoped photosensitive fiber: decay mechanisms involved during annealing.

An antimony--germanium- (Sb--Ge-) codoped fiber specially designed for the fabrication of fiber Bragg gratings (FBGs) with high temperature sustainability has been developed. The photosensitivity and the high-temperature sustainability of FBGs that have been written into this fiber were tested. The results obtained showed that the FBG written into this fiber has a very high temperature sustainability of 900 degrees C. A decay mechanism that involves cation hopping is presented to explain the observed high temperature sustainability of the grating written into this fiber.

Journal Article↗

PubMed2004

Bragg gratings written in Sn-Er-Ge-codoped silica fiber: investigation of photosensitivity, thermal stability, and sensing potential.

Bragg gratings were fabricated in an Sn-Er-Ge-codoped silica fiber with a phase mask and ultraviolet radiation from a 248-nm KrF excimer laser. The photosensitivity of the fiber was examined by studying the initial growth rate of the gratings written into it. The thermal stability of the gratings was investigated and modeled in terms of both the refractive-index modulation and the effective refractive index of the fiber core. It was shown that the temperature-induced irreversible shift in the Bragg wavelength could not be predicted by the isothermal decay of the refractive-index modulation. Finally, the potential of the gratings written into the fiber is discussed in terms of their use in high-temperature-sensing applications.

Journal Article↗

PubMed2003

Velocity matching of a GaAs electro-optic modulator.

New designs for the velocity matching of a deep-etched semiconductor electro-optic modulator are presented. A tantalum pentoxide (Ta2O5) coating is considered here for achieving velocity matching between the microwave and the optical signals. The effects of the velocity mismatch, the conductor loss, the dielectric loss, and the impedance mismatch are studied in relation to the optical bandwidth of a high-speed semiconductor modulator. It is shown that both the dielectric loss and the impedance matching play key roles for velocity-matched high-speed modulators with low conductor loss. The effects of Ta2O5 thickness on the overall bandwidth and on the half-wave voltage-length product VpiL are also reported.

Journal Article↗

PubMed2003

Highly photosensitive Sb/Er/Ge-codoped silica fiber for writing fiber Bragg gratings with strong high-temperature sustainability.

A highly photosensitive Sb/Er/Ge-codoped silica fiber for fabricating fiber Bragg gratings (FBGs) with strong high-temperature sustainability is presented. The photosensitivity and the high-temperature sustainability of FBGs created in this fiber are examined and compared with those produced in a Sn-doped silica fiber. The results show that the Sb/Er/Ge fiber has a much higher level of photosensitivity than the Sn-doped silica fiber and that the FBGs have a similar high-temperature sustainability of 800 degrees C. The strong fluorescence properties observed from this fiber are also examined.

Journal Article↗

PubMed2003

Bandwidth estimation for ultra-high-speed lithium niobate modulators.

The effects of velocity matching, impedance matching, conductor loss, and dielectric loss on the optical bandwidth of an ultra-high-speed lithium niobate modulator are reported. It is shown that both dielectric loss and impedance matching play a key role for velocity-matched high-speed modulators with low conductor loss. The effects of etch depth, buffer thickness, electrode width, and thegap between the electrodes on device performance are also illustrated.

Journal Article↗

PubMed2003

Analysis of thermal decay and prediction of operational lifetime for a type I boron-germanium codoped fiber Bragg grating.

The thermal decay of a type I fiber Bragg grating written at 248 nm in boron-germanium codoped silica fiber was examined in terms of its reflectivity and Bragg wavelength change. In addition to the decay in reflectivity, which was observed, a shift in Bragg wavelength over the temperature range considered was seen. A mechanism for the decay in the reflectivity was developed and modeled according to a power law, and the results were compared with those from the aging curve approach. The wavelength shift was simulated by modification of the power law, which was also found to fit well to the experimental data. Temperature-induced reversible and irreversible change in the grating characteristic were observed and considered to be a means to predict the working lifetime of the grating at comparatively low temperatures. Accelerated aging was also reviewed and compared in terms of reflectivity and Bragg wavelength shift. It was shown that the temperature-induced irreversible shift in the Bragg wavelengths could not be predicted by use of the isothermal decay of the refractive-index modulation. The results were discussed within the framework of the current theoretical approaches for predicting the stability of gratings of this type.

Journal Article↗

PubMed2002

Dual temperature and strain measurement with the combined fluorescence lifetime and Bragg wavelength shift approach in doped optical fiber.

We have constructed fiber-optic sensors to measure temperature and strain by combining the properties of fiber Bragg gratings with the fluorescent lifetimes of various doped fibers. Sensors have been made with the fiber Bragg grating written directly into the doped fiber to ensure the collocation of the strain and temperature measurement points. Results are compared with those obtained previously from a Bragg grating written into standard photosensitive fiber spliced to doped fiber. Standard deviation errors of 7 microepsilon and 0.8 degrees C have been obtained for strain and temperature ranges of up to 1860 microepsilon and 120 degrees C, respectively.

Journal Article↗