Biomedical subjects

Kevin M Shakesheff

Publications and source records attributed to Kevin M Shakesheff.

At least 19 recordsLinked to original sources

PubMed2006

Zonal release of proteins within tissue engineering scaffolds.

The manufacture of a scaffold for tissue engineering applications that can control the location and timing of growth factor release is described. The scaffold is formed by the sintering of poly(DL-lactic acid) (P(DL)LA) microparticles, plasticized with poly(ethylene glycol) (PEG), although the method can be used for many other polymer types. The microparticles were loaded with model proteins, trypsin and horseradish peroxidase (HRP), or recombinant human bone morphogenetic protein-2 (rhBMP-2). Entrapment efficiencies above 75% were achieved using a solid-in-oil-in-water system. Controlled release of active protein was achieved for at least 30 days. Microparticles were built into protein-loaded or protein-free layers and release of the protein was restricted to zones within the scaffold. Cell response to rhBMP-2 was tuneable by changing the dose of the rhBMP-2 released by varying the ratio of protein-loaded and protein-free microparticles within scaffolds. Zonal activity of rhBMP-2 on C2C12 cells was demonstrated. The scaffolds may find utility in applications where gradients of growth factors within 3D templates are required or where zonation of tissue growth is required.

Animals↗

PubMed2006

Mammalian cell survival and processing in supercritical CO(2).

We demonstrate that mammalian cells can survive for 5 min within high-pressure CO(2)(.) Cell survival was investigated by exposing a range of mammalian cell types to supercritical CO(2) (scCO(2)) (35 degrees C, 74 bar; 1 bar = 100 kPa) for increasing exposure and depressurization times. The myoblastic C2C12 cell line, 3T3 fibroblasts, chondrocytes, and hepatocytes all displayed appreciable but varying metabolic activity with exposure times up to 1 min. With depressurization times of 4 min, cell population metabolic activity was >/=70% of the control population. Based on survival data, we developed a single-step scCO(2) technique for the rapid production of biodegradable poly(dl-lactic acid) scaffolds containing mammalian cells. By using optimum cell-survival conditions, scCO(2) was used to process poly(dl-lactic acid) containing a cell suspension, and, upon pressure release, a polymer sponge containing viable mammalian cells was formed. Cell functionality was demonstrated by retention of an osteogenic response to bone morphogenetic protein-2 in C2C12 cells. A gene microarray analysis showed no statistically significant changes in gene expression across 4,418 genes by a single-class t test. A significance analysis of microarrays revealed only eight genes that were down-regulated based on a delta value of 1.0125 and a false detection rate of 0.

Animals↗

PubMed2006

Mathematical modelling of engineered tissue growth using a multiphase porous flow mixture theory.

This paper outlines the framework of a porous flow mixture theory for the mathematical modelling of in vitro tissue growth, and gives an application of this theory to an aspect of tissue engineering. The problem is formulated as a set of partial differential equations governing the space and time dependence of the amounts of each component of the tissue (phase), together with the physical stresses in each component. The theory requires constitutive relations to specify the material properties of each phase, and also requires relations to specify the stresses developed due to mechanical interactions, both within each phase and between different phases. An application of the theory is given to the study of the mobility and aggregation of a population of cells seeded into an artificial polymeric scaffold. Stability analysis techniques show that the interplay of the forces between the tissue constituents results in two different regimes: either the cells form aggregates or disperse through the scaffold.

Algorithms↗

PubMed2006

Promotion of human dermal fibroblast migration, matrix remodelling and modification of fibroblast morphology within a novel 3D model by Lucilia sericata larval secretions.

Lucilia sericata larvae, or green bottle fly maggots are applied to chronic wounds to aid healing. Previously, our laboratory has characterized the enzymatic activities present within maggot excretions/secretions (ES). Since then, we have related these to the degradation of extracellular matrix components, alteration of human, dermal fibroblast adhesion to surfaces and the stimulation of fibroblast migration within a two-dimensional in vitro assay. In this study, we developed a novel three-dimensional in vitro assay in which to observe fibroblast migration and morphology in response to maggot ES. Here, primary human foreskin fibroblasts were embedded within collagen gels containing fibronectin. Phase contrast and confocal microscopy were used in conjunction with image analysis software to examine and quantify aspects of fibroblast behavior. Our results showed that maggot ES stimulated fibroblast migration through the matrix and induced altered cell morphologies. Remodelling of the extracellular matrix located between individual fibroblasts was also induced, providing a mechanism by which cells may detect each other's presence over considerable distances. Thus, mechanisms by which maggots enhance tissue formation within wounds may be via the promotion of fibroblast motility, acceleration of extracellular matrix remodelling and coordination of cellular responses.

Animals↗

PubMed2006

Encapsulation of RIN-m5F cells within Ba2+ cross-linked alginate beads affects proliferation and insulin secretion.

The viability, proliferation and insulin production of RIN-m5F cells when loaded into alginate beads to form a 3D culture system has been investigated. The mechanism of alginate cross-linking (calcium ions vs barium ions), the addition of poly(L-lysine) (PLL) and poly(L-ornithine (PLO) and presence of different extra-cellular matrix proteins (ECM) influence the RIN-m5F cell behaviour. Cells in calcium alginate beads (CAB) proliferated and produced more insulin per cell than monolayer culture, but the physical properties of the beads were poor and they ruptured within a few days of culture. Barium alginate beads (BABs) provided a stable encapsulation method. Addition of PLL and PLO at concentrations above 0.1% w/v with the culture medium increased cell proliferation. With the addition of ECMs after bead formation there was a further increase in cell proliferation for certain combinations of ECM and PLO. It was concluded that RIN-m5F-loaded Ba-alginate beads (BABs), when incorporated with varying concentrations of poly (L) lysine (PLL), poly (L) ornithine (PLO) in the presence of extra-cellular matrix proteins (ECMs) were superior to both tissue culture and RIN-m5F-loaded Ca-alginate beads (CABs) in terms of physical stability, cell proliferation and insulin production.

Alginates↗

PubMed2006

Incorporation of proteins within alginate fibre-based scaffolds using a post-fabrication entrapment method.

In this study, a physical entrapment process was explored for the incorporation of proteins within preformed fibrous alginates and the release profile was tuned by varying the processing parameters. The entrapment process was carried out in a series of aqueous solutions at room temperature and involved pre-swelling of the fibrous alginate within a Na(+)-rich solution, followed by exposure to the protein of choice and entrapping it by re-establishing cross-links of alginate with BaCl2. Entrapment and release of fluorescein isothiocyanate-labelled bovine serum albumin (FITC-BSA), a model protein, was studied. It was found that a sustained release of the incorporated protein in cell culture medium for about 6 days was achieved. The main factors determining the release profile included the NaCl/CaCl2 ratio in the pre-swelling solution, protein concentration, and the exposure time. To retard protein release, alginate fibres with entrapped FITC-BSA were processed together with poly(D, L-lactide) (PDLLA) into porous alginate fibre/PDLLA composites using supercritical CO2. In this manner, release of the protein for up to 3 months was achieved.

3T3 Cells↗

PubMed2006

Scaffolds for liver tissue engineering.

This review focuses on the expanding role for biomaterials and polymer scaffolds in liver tissue engineering. Studies are subdivided into in vitro and in vivo approaches. The in vitro section of the review discusses the challenges specific to liver tissue engineering, and how the choice of scaffold and its structure influences the success of the regenerative medicine strategy. The in vivo section evaluates early attempts to stimulate liver repair with cell and growth factor therapies, their failings and how current approaches aim to solve these problems.

Animals↗

PubMed2005

The production of protein-loaded microparticles by supercritical fluid enhanced mixing and spraying.

In this study, we use supercritical carbon dioxide as a processing medium for the fabrication of poly(DL-lactic acid) P(DLLA) microparticles that encapsulate a protein material. We have previously demonstrated that this polymer and a dry powder of a protein can be mixed under supercritical carbon dioxide conditions (above 31.1 degrees C and 73.8 bar) and that the protein component retains its biological activity. In this paper, we progress the work to demonstrate that the plasticized polymer and dry powder protein mixture can be sprayed to form solid polymer particles that encapsulate the protein. Particle size range is between 10 and 300 microm after spraying. Ribonuclease A and lysozyme were encapsulated in the polymer without significant loss of enzymatic activity. Biological assays of insulin and calcitonin confirm retention of activity after fabrication of the microparticles and release of the peptides/proteins.

Calcitonin↗

PubMed2005

The effect of three-dimensional co-culture of hepatocytes and hepatic stellate cells on key hepatocyte functions in vitro.

In this study, we demonstrate the ability of a three-dimensional co-culture model to preserve some key aspects of differentiated hepatocyte function in vitro. Freshly isolated rat hepatocytes in co-culture with activated stellate cells rapidly aggregate to form well-defined viable spheroids. After 5 days in culture, the spheroids have a complex extracellular matrix support and hepatic ultrastructure including bile canaliculi, tight junctions, desmosomes and lipid storage. Co-culture spheroids have superior cytochrome P450 (CYP450) 3A and 2B function, and increased inducibility of 2B function, relative to a range of hepatocyte monoculture techniques (high-performance liquid chromatography of testosterone metabolites). Increased function in co-culture is supported by greater expression of CYP450 3A23, 1A2, and 2E1 mRNA relative to monoculture (reverse transcriptase quantitative polymerase chain reaction). Also, high hepatocyte growth factor mRNA expression in co-culture suggests a post-traumatic, or possibly regenerative, environment. A preliminary study of human hepatocytes co-cultured with rat stellate cells demonstrated prolonged function of CYP450 3A4, 2C19 and 2C9. This study shows that stellate cells facilitate spheroid formation, influence spheroid architecture, and are an effective method of preserving some aspects of hepatocyte function in the early stage of culture.

Animals↗

PubMed2004

Alpha-MSH inhibits inflammatory signalling in Schwann cells.

Peripheral nervous system injury may be corrected by surgical repair, but in many cases this is not possible and will result in loss of motor and sensory function. Schwann cells provide many neurotrophic signals essential for axon regeneration and immediately after injury inflammatory cytokines are released necessary for Schwann cell de-differentiation. However, extended periods of inflammation after injury prevent Schwann cell proliferation, and therefore interventional approaches to enhance proliferation may in turn improve axon regeneration. We therefore investigated the ability of alpha-melanocyte stimulating hormone (alpha-MSH; a potent anti-inflammatory peptide) to inhibit the activation of the NF-kappaB transcription factor (required for inflammatory signalling) in cultured rat primary Schwann cells, stimulated with tumour necrosis factor-alpha (TNF-alpha) or interferon-gamma (IFN-gamma). Both cytokines activated NF-kappaB rapidly after 60 min incubation, observed as a translocation from the cytoplasm to the nucleus. alpha-MSH inhibited activation (i.e. inhibited nuclear translocation) in response to TNF-alpha or IFN-gamma by 81% and 100% respectively. The anti-inflammatory properties of this peptide may therefore have potential for treatment of peripheral nerve injury to improve the healing response.

Animals↗

PubMed2004

Plasticization and spraying of poly (DL-lactic acid) using supercritical carbon dioxide: control of particle size.

Exposure of poly(DL-lactic acid) (PDLLA), and related polymers, to supercritical CO2 (scCO2) at or below, physiological temperatures leads to very effective plasticization and liquefying of the polymers. The phenomenon arises from the high solubility and interaction of the scCO2 in the polymer. Under these unique conditions, temperature and solvent labile molecules can be mixed efficiently into the liquefied polymer. This liquefied polymer/drug/CO2 mixture can then be sprayed into a collecting chamber, and during this process particles of drug-loaded polymer are formed. This process is very different from rapid expansion and antisolvent based techniques that have been previously reported. In this article, we describe a method of controlling particle size during the spray process by introducing a backpressure of N2 in the collecting chamber. This backpressure dynamically regulates the loss of CO2 from the issuing polymer/CO2 mixture, leading to control over sprayed particle size. In situ observation of the viscosity of the plasticized polymer indicates that a backpressure of 68 bar or greater is necessary to ensure the production of fine particles. The influences of backpressure and saturation temperature on particle size for the sprayed products are discussed in terms of observed PDLLA/CO2 mixture viscosities.

Air Pressure↗

PubMed2004

In vitro assessment of cell penetration into porous hydroxyapatite scaffolds with a central aligned channel.

There is a clinical need for synthetic scaffolds that promote bone regeneration. A common problem encountered when using scaffolds in tissue engineering is the rapid formation of tissue on the outer edge of the scaffold whilst the tissue in the centre becomes necrotic. To address this, the scaffold design should improve nutrient and cell transfer to the scaffold centre. In this study, hydroxyapatite scaffolds with random, open porosity (average pore size of 282+/-11microm, average interconnecting window size of 72+/-4microm) were manufactured using a modified slip-casting methodology with a single aligned channel inserted into the centre. By varying the aligned channel diameter, a series of scaffolds with channel diameters ranging from 170 to 421microm were produced. These scaffolds were seeded with human osteosarcoma (HOS TE85) cells and cultured for 8 days. Analysis of cell penetration into the aligned channels revealed that cell coverage increased with increasing channel diameter; from 22+/-3% in the 170microm diameter channel to 38+/-6% coverage in the 421microm channel. Cell penetration into the middle section of the 421microm diameter channel (average cell area coverage 121x10(3)+/-32x10(3)microm(2)) was significantly greater than that observed within the 170microm channel (average cell area coverage 26x10(3)+/-6x10(3)microm(2)). In addition, the data presented demonstrates that the minimum channel (or pore) diameter required for cell penetration into such scaffolds is approximately 80microm. These results will direct the development of scaffolds with aligned macroarchitecture for tissue engineering bone.

Cell Division↗

PubMed2003

Leukocyte-inspired biodegradable particles that selectively and avidly adhere to inflamed endothelium in vitro and in vivo.

We exploited leukocyte-endothelial cell adhesion chemistry to generate biodegradable particles that exhibit highly selective accumulation on inflamed endothelium in vitro and in vivo. Leukocyte-endothelial cell adhesive particles exhibit up to 15-fold higher adhesion to inflamed endothelium, relative to noninflamed endothelium, under in vitro flow conditions similar to that present in blood vessels, a 6-fold higher adhesion to cytokine inflamed endothelium relative to non-cytokine-treated endothelium in vivo, and a 10-fold enhancement in adhesion to trauma-induced inflamed endothelium in vivo due to the addition of a targeting ligand. The leukocyte-inspired particles have adhesion efficiencies similar to that of leukocytes and were shown to target each of the major inducible endothelial cell adhesion molecules (E-selectin, P-selectin, vascular cell adhesion molecule 1, and intercellular adhesion molecule 1) that are up-regulated at sites of pathological inflammation. The potential for targeted drug delivery to inflamed endothelium has significant implications for the improved treatment of an array of pathologies, including cardiovascular disease, arthritis, inflammatory bowel disease, and cancer.

Antibodies, Monoclonal↗

PubMed2003

Alpha-MSH inhibits inflammatory signalling in olfactory ensheathing cells.

Alpha-melanocyte stimulating hormone (alpha-MSH) was originally documented as a peptide that induced pigmentation in skin. However, more recent work suggests that it acts as a potent anti-inflammatory molecule in several tissues including nerve. Alpha-MSH works by directly inhibiting cytokines that cause inflammation, in particular tumour necrosis factor-alpha, interleukin-1beta, interleukin-6 and gamma-interferon. A common mechanism of inhibition is via the NF-kappaB transcription factor. We investigated the ability of alpha-MSH to inhibit the activation of NF-kappaB in cultured rat primary olfactory ensheathing cells stimulated with tumour necrosis factor-alpha or gamma-interferon. Both cytokines activated NF-kappaB rapidly (after 60 min incubation), observed as a translocation from cytoplasm to nucleus. alpha-MSH inhibited this activation (and hence nuclear translocation) by approximately 50% for both cytokines. The anti-inflammatory properties of this peptide in neural cells may therefore support a basis for treating CNS injury, where inflammation is a major problem.

Animals↗

PubMed2003

Cell-type-specific adhesion onto polymer surfaces from mixed cell populations.

The targeted adhesion of a specific cell type from a mixed cell suspension via the surface presentation of a cell-specific ligand is demonstrated. This generic strategy is illustrated by the covalent attachment of a galactose derivative to a polylysine backbone via the amine functionality. Following adsorption of the resultant material to a polymer surface, hepatocyte adhesion is increased via the interaction between galactose and asialoglycoprotein receptors in a concentration-dependent manner. The selective nature of the material is demonstrated by the approximate doubling in the adhesion of hepatocytes relative to a nontargeted cell type (hepatic stellate cells), and an inability of the modified polymer surface to attract additional numbers of the nontargeted cells. This strategy provides a mechanism for controlling the ratios of cell types adhering to scaffold supports, thus enabling the rapid creation of defined coculture systems from heterogeneous cell suspensions.

Animals↗

PubMed2003

Development of a bioluminescent ATP assay to quantify mammalian and bacterial cell number from a mixed population.

Modification of biomaterial surfaces is one approach aimed at improving cellular interactions and the subsequent integration of medical devices into the body. However, by optimising surfaces to enhance mammalian cell adhesion there is the potential risk that adhesion of bacteria will also be increased. Bacterial colonisation of biomaterials can be problematic as infection often results in morbidity and the consequent removal of the failing device from the body. Currently, quantifying cellular adhesion from a mixed population of bacterial and mammalian cells can only be determined by slow and laborious methods such as microscopy. ATP is a key molecule in the metabolism of both mammalian and bacterial cells and can be used to quantify cell numbers. In this study, we have modified a bioluminescence-based ATP assay to enable the differential measurement of both mammalian and bacterial cell ATP levels within the same culture. Mixed populations of Staphylococcus epidermidis and 3T3 fibroblasts were assessed both in suspension and adhered to a surface. ATP levels from cultures in suspension were selectively extracted and measured from both cell types, revealing a linear trend that would enable the differentiation of cell numbers from a mixed population. The application of the assay to adhered mixed cultures also allowed differences in ATP levels from both cell types to be distinguished. The data presented reveals that this assay would be useful for the rapid screening of cellular adhesion to modified surfaces although, its use in detecting subtle differences in ATP levels may be limited due to natural interactions between the two cell types.

3T3 Cells↗

PubMed2003

A simple method for the simultaneous isolation of stellate cells and hepatocytes from rat liver tissue.

Hepatic stellate cells (HSCs), also referred to as Ito cells, perisinusiodal cells and fat-storing cells, have numerous vital functions. They are the main extracellular matrix-producing cells within the liver and are involved in the storage of retinol. HSCs are also known to secrete a number of liver mitogens. Current isolation techniques are cumbersome and most require a pronase digestion step, which destroys any hepatocytes present. We present a simple method for isolation and culture of hepatic stellate cells from the normally discarded washings from a two-step collagenase hepatocyte isolation, which has shown a yield of more than 1.5 x 10(6) viable HSCs after 5 days in culture. The cells were positively identified as HSCs by staining for two intermediate filaments (desmin and GFAP) and observing their distinct morphology from other liver cell types. This efficient method allows rapid and consistent isolation of stellate cells to give a culture that may be passaged several times.

Animals↗

PubMed2003

Chemical modification of mammalian cell surfaces.

The mammalian cell surface is a highly heterogeneous chemical environment with proteins, carbohydrates, lipids and composite molecules controlling vital cell functions. Chemical modification of this environment is a challenge due to the complexity of the surface chemistry and the fragility of the cell. Here, we review recent attempts to perform targeted, non-genetically controlled, changes to cell surface chemistry. Potential applications of cell surface engineering are presented.

Animals↗