Biomedical subjects

Kimio Sumaru

Publications and source records attributed to Kimio Sumaru.

6 recordsLinked to original sources

PubMed2006

Manipulation of living cells by using PC-controlled micro-pattern projection system.

In order to meet the diversifying demand for the cell manipulation in the rapid progress of cell engineering, we developed a novel technique to capture the living cells on a culture substrate by irradiating light in a multiple manner. In clear contrast to the conventional cell patterning using the previously patterned substrate, the cell-retaining area can be defined even after cell seeding, and the captured cells can continue to grow freely beyond the defined area afterwards. After the light irradiation in arbitrary micropattern by using a newly developed apparatus and the process to remove non-captured cells including EDTA treatment, the highly contrasted cell patterns were formed with the precision of single cell size. Moreover, it was determined that the cell capturing arose just after light irradiation and diminished gradually in a time scale of 10h. It was confirmed that the cells maintained their viability well after the manipulation process including photo-induced cell capturing.

Animals↗

PubMed2006

Photoresponse of an aqueous two-phase system composed of photochromic dextran.

A novel aqueous two-phase system, which exhibits a reversible photoinduced phase separation, has been developed with photochromic dextran synthesized by substituting 0.3 mol % of the hydroxyl groups with the photochromic chromophore, 6-nitrospiropyran (NSp). For an aqueous solution containing this photochromic dextran and poly(ethylene glycol), it was observed that the solution, which had been uniform in the dark, quickly separated into two phases through blue light irradiation within 1 min and returned to the former uniform state spontaneously after heating at 50 degrees C for 1 h. Photoisomerization of NSp was confirmed to shift the phase separation temperature of this aqueous two-phase system by up to 30 degrees C.

Benzopyrans↗

PubMed2006

Photoresponsive properties of poly(N-isopropylacrylamide) hydrogel partly modified with spirobenzopyran.

A photoresponsive hydrogel was prepared by radical copolymerization of N-isopropylacrylamide, a vinyl monomer having a spirobenzopyran residue and cross-linker. By the observation of photoresponsive shrinking and the conductance change, it was confirmed that the hydrogel in an acidic condition exhibited drastic and rapid volume shrinkage and proton dissociation when it was irradiated with blue light. Further, to examine its application to the mass transfer control, we prepared a photo- and thermoresponsive gate membrane by introducing this photoresponsive hydrogel to the surface of a porous membrane. As the first demonstration of the photocontrol of membrane permeation for liquid, it was observed that its permeability for 1 mM HCl aqueous solution increased by 2 times in response to the blue light irradiation, and this photoresponse of the permeability was confirmed to be repeatable.

Journal Article↗

PubMed2006

Construction of a new artificial biomineralization system.

Hydroxyapatite (HAP) was mineralized in poly(vinyl alcohol) (PVA)/poly(acrylic acid) (PAA) complex hydrogel immersed in a salt solution containing PAA. The transparent HAP/polymer composite swelled in water depending on the HAP content; high HAP content gave small swelling and vice versa. The HAP content reached about 80 wt % at most. Observation of the cross section of the composite by energy-dispersive analysis of X-ray (EDAX) revealed that the composite consisted of two phases, i.e., a hard HAP-rich phase and a soft polymer-rich phase. In the HAP-rich phase, the space inside the hydrogel was occupied by HAP, while HAP was not mineralized in the polymer-rich phase. The nucleation seemed to take place, at first, at the middle depth of the hydrogel where the HAP-rich phase was formed. The HAP-rich phase grew its size toward the surface of the hydrogel at the cost of the polymer-rich phase. The presence of phosphorus, P, in the polymer-rich phase indicated the adsorption of HPO(4)(2-) on the polymer chain of the hydrogel via hydrogen bonding, accompanied with Ca(2+) because of electrostatic constraints. This adsorption of ions in addition to Donnan distribution of ions leads to the formation of a hypercomplex that can be regarded as a precursor of the HAP-rich phase. The change of the hypercomplex into the HAP-rich phase is discontinuous and hence concluded as a phase transition. By comparison of our mineralization system with the biomineralization system of HAP and CaCO(3), the physicochemical mechanism of the mineralization process in the present system was found to be similar to that in biological systems. In this sense, we termed the present system an artificial biomineralization system.

Acrylic Resins↗

PubMed2004

Probing the dielectric environment surrounding poly(N-isopropylacrylamide) in aqueous solution with covalently attached spirobenzopyran.

The dielectric environment surrounding poly(N-isopropylacrylamide) in aqueous solution was investigated by probing with spirobenzopyran covalently attached as a side chain to the polymer main chain. Inherent characteristics of the spirobenzopyran chromophore were analyzed, and the chromophore was confirmed to be suitable to probe the local polar condition around the polymer. Measurements for an aqueous polymer solution at various temperatures elucidated that the dielectric environment surrounding the polymer changed continuously even in the temperature range far below the lower critical solution temperature. This result suggested that the local and weak orientation of water molecules around the polymer diminished continuously in a preliminary stage of shifting to thermally induced phase separation. The dielectric environment surrounding thermoresponsive polymer in aqueous solution was investigated by probing with spirobenzopyran covalently attached as a side chain to the polymer main chain.

Acrylic Resins↗

PubMedDate not supplied

In situ control of cell adhesion using photoresponsive culture surface.

A photoresponsive culture surface (PRCS) allowing photocontrol of cell adhesion was prepared with a novel polymer material composed of poly(N-isopropylacrylamide) having spiropyran chromophores as side chains. Cell adhesion of the surface was drastically enhanced by the irradiation with ultraviolet (UV) light (wavelength: 365 nm); after subsequent cooling and washing on ice, many cells remained in the irradiated region, whereas most cells were removed from the nonirradiated region. The cell adhesion of the PRCS, which had been enhanced by previous UV irradiation, was reset by the visible light irradiation (wavelength 400-440 nm) and the annealing at 37 degrees C for 2 h. Also it was confirmed that the regional control of cell adhesion was induced several times by repeating the same series of operations. Further, living cell patterning with the 200 microm line width was produced readily by projecting UV light along a micropattern on the PRCS on which the living cells had been seeded uniformly in advance. By using a fluorescent probe that stains living cells only, it was confirmed that the cells maintained sufficient viability even after UV light irradiation followed by cooling and washing.

Acrylic Resins↗